well.., i own a o2 xda iis(blueangel) that i wanted to upgrade to a better rom instead of my current 6.5 rom.. however, my device seems unable to enter the bootloader by using the file enterbl.exe....well, i cant use the key combination bootloader entering as my power button was broken.... i was told by mr.egzthunder1 at the blueangel thread that mtty could get the device into bootloader but he didnt remember the command...
So, i was asking for anyone here that knew the
command or ANY OTHER WAYS to get my ba into the bootloader,
please help me,..any help is VERY-VERY appreciated.....
Thanks in Advance....
Related
Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
After update boot loader hovers. I cant instal rom update!
Help me please instal new boot loader!
[email protected]
icq 310975913
1: We need a LOT more information than that to help. What did you try? What actually happened?
2: Note that it can be considered rude if you go on a forum asking for help and expect people helping you to go out of their way by posting to an email address or in chat instead of posting on the forums. In short, rude words: if you cant be bothered to check up on the forums yourself, then why should people bother to help you?
i from russia and my english not well))
I instal new version of ROM and radio and installer was quit. in Moscow service center (by phone) says what my boot loader chip is corupted and need repair chip(((((( price 120$$$
i fink what my chip in norm! But my boot loader is corupted!
Help me please reinstal boot laoder!!!
Or help me please repair chip!
I work in www.macsolutions.ru (Servise ingener)
But i can repair only macs and ipods)))))))
i fogog : my pda is T-mobile mda compact
It is VERY rare for a bootloader chip to be fried from just a ROM upgrade. ROM upgrades aren't supposed to even touch the chip or its contents.
Try holding Power + Camera + Soft Reset buttons and see if you can get into the bootloader again. If it still boots into the bootloader (ie. You see 'Serial' and 'v1.xx' somewhere on the screen) then your bootloader is not dead, and you're probably being scammed by whoever told you it was dead. If it does get into bootloader then you should be able to revive the thing with an SD card flash, though it might be a bit difficult.
If it doesn't get into bootloader though, then you might be in trouble. Either way, post back here and I'll try to help in what ways I can.
Help me please boot from sd! I cant find link how to!!
But does it get into bootloader mode? If it doesn't then you can't reflash it. If it does, try step 2d in this guide first: http://forum.xda-developers.com/showthread.php?t=273911
And sorry, but the SD card flash method needs you to have a working Magician... so I don't think that method can be done.
i can get boot loader update for my magican!!!
Help me please!
i find only Universal boot loader update!(((
How to reflash from nb1 and nb0 files???
Calm down! I am trying to help you!
I don't understand you. Can you get into bootloader mode as I described? If it does, try the method I posted above!
You cannot update the bootloader on a Magician as of now. If your bootloader doesnt work, then you will probably need a new chip.
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
Hello everybody.
I have a htc prophet G4 (orange spv m600). After that i did a ROM flash to getting WM6 on it i'm getting a reg/green/blue screen with an ipl code and spl code.
When i put the usb in he see that, but now is coming my problem. I'm not getting into bootloader mode. What i did to get into bootlaoder mode is:
(hold the commmngr button and insert the stylus into the larger hole next to the power socket next release the styllus and hold the commmngr button)
Please wat is the thing that i'm doing wrong a tried all different combinations also with the camera button and with en without usb. I need to get into bootloader mode to getting back to WM5.
Greetz Jeronimo
hello
you may not have hardspled your device before flashing WM 6 well if you can get to bootloader mode follow this link
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
this will recover your device and if successful you will be back to windows mobile 5 ROM now if your thinking of flashing to wm6 you need to follow certain guides before flashing a new ROM
here are some:
http://forum.xda-developers.com/showthread.php?t=405384
and more if you will help yourself by searching on this forums...
hope this will help yah
Hey xda,
I rooted my friends phone a couple of days ago and he also wanted me to install a rom on his phone. i downloaded the twrp app and installed it as the app said. the day after, the would not start up and just viewing an error: image signature verify fail. someone with same problem told me i had to unlock the bootloader and the problem would be solved. I unlocked the bootloader with an unlock code and fastboot. but now it doesn't start up either! when i hold the power button it sais ascend and then it turns black. the hardware buttons light up. if i look in fastboot it shows the bootloader is unlocked but I can't acces it. I can only go into the purple screen (download mode?) that blackscreen and i guess fastboot because i can see it if i type 'fastboot devices' in cmd window. I have tried to wipe all data with cmd by typing 'fastboot -w' but it still doesn't start up
I need help now because I don't want to buy my friend a new one. it's a huawei g510-0100.
A reply would be much appreciated.
thanks,
Lars
Hi, thank you fur using XDA Assist. You need to flash the stick firmware on your device. Unfortunately there's very little information about your device so if you don't know how to flash the stock firmware ask here,http://forum.xda-developers.com/showthread.php?t=2257421
Thread closed.