Related
Recently, I needed ROMs but non of the kitchens I know work. Can you please give me to links of any kitchens you know.
Thank You in advance for your attention!
http://lumpistefan.dyndns.org/
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
If you are cooking a 2002 rom make sure you leave some space.
LumpiStefan said:
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
Click to expand...
Click to collapse
Lumpi , First of all thanks for your Kitchen and ur hard work..
but the last time I was cooking a rom (last week) T mobile Rom 4.01.00 with the Windows Mobile Boot screen image and the 4.01.16 with the o2 Boot screen those images didn't show up I got instead T-mobile bootscreen.
At the end the Rom what's important to me but still there should be some fix for that, Thank you again for the Kitchen I hope to see soon the WM2003 SE in it hopefully.
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
batvanio said:
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
Click to expand...
Click to collapse
Ok. I made an hint, that with the XDA-Developers Autoconfig you have to let about 450kB free for cooking. I'm sorry, that i can't change this. Then it should work. The error of the missing config files will still be there. This is more work for me. But it should only concern the german autoconfiguration...
HTH
Stefan
LumpiStefan
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Re: LumpiStefan
batvanio said:
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Click to expand...
Click to collapse
I'm sorry, but i can't believe this. Have you tried to look at the log after cooking the rom? There is an output of the BAse Rom you cooked.
Many Users are using the kitchen, but i never heard of this problem. Which browser are you using?
Stefan
My brawser is IE 6.0.2800
It is very strange because i tried not only once but several times cooking both roms and upgrading them to the phone, but with the same result.
Very very strange...
batvanio said:
Very very strange...
Click to expand...
Click to collapse
This is true. Tried it now for myself, but all was working fine.
Used same browser version, and all worked fine....
:shock:
I'm sorry, but it looks like I can't help you.
Stefan
What can i do now?
I cannot remove the French ROM. When I am trying to upgrade it with another ROM it says Unsupported language 'FRA'.
Can you suggest how i might fix this.
P.S. - the ROM i want to backup to is in the *.exe format
I think, you have to use adapt rom, or flash your device using an SD-Card. Therefor you have to extract the exe-File with winzip, and copy the NK.nbf file via xdatools to an SD-Card.
There are many threads about this..
Stefan
I managed to do it successfully. Thank you very much for your help!
I also would like to ask you if there is a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
was wondering if we could use the rom kitchen for xda2?
The Hobbit said:
was wondering if we could use the rom kitchen for xda2?
Click to expand...
Click to collapse
Kitchen should also work for XDA2 ROMS. But in the moment, there are only XDA1 Roms in it. Also you normally don't have the nessesary of doing this since the XDA2 has enough space.....
Stefan
is there a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
well some programs you can download and install in your ram but rom can only be writen to when you flash the rom and you can only flash the whole rom at once
but can i download the programs from the kitchen, the one which you customize for the rom, and how can i install them to my current rom
Can I upgrade my Dopod 818 from CHS rom to WWE rom ? How ?
I have exactly the same question! Any help would be greatly appreciated =)
I've done some searching and some people have said that it's OK, but i can't find where i can get the ROMs from the imate site.. the ftp site also has kinda confusing names for the files so i don't know which one can be used.
Thanks in advance =)
Regards,
Peter
OK, i just found this thread:
http://forum.xda-developers.com/viewtopic.php?t=17460
but there is a lot of details that i don't fully understand... is there an FAQ or tutoiral where i can learn the basics? Thanks =)
Regards,
Peter
siup1 said:
OK, i just found this thread:
http://forum.xda-developers.com/viewtopic.php?t=17460
but there is a lot of details that i don't fully understand... is there an FAQ or tutoiral where i can learn the basics? Thanks =)
Regards,
Peter
Click to expand...
Click to collapse
http://forum.xda-developers.com/vie...=0&postorder=asc&highlight=maupgrade&start=25
Look for ID64's message.
1. Basically, just extract the rom file in a folder.
U will see 3 nbf files w/ other files.
1. nk.nbf <= the OS rom
2. ms_.nbf <= extended rom software rom
3. Radio.nbf <= radio rom
2. U can replace or remove the nbf file from other rom (eg: 1.10 radio from USA rom)
3. uncheck all connection check box in Active Sync
4 put the MaUpgradeUt.exe in the folder
5. put the magician in boot loader mode by camera + power + soft reset button
6. run the MaUpgradeUt.exe
Hi, thanks a lot for you reply =) I'll read up on the stuff, i'll post if i need more help =P thanks =)
Regards,
Peter S.
Hi Midget,
Hope you don't mind that I start a new thread again.
Your release yesterday didn't work out right?
Your a moderator so maybe you can delete it?
Anyway, I modified it a bit and now it's working !!!!!!!!!!!!!
Credits to:
-Bepe
-Helmi_c
-Mamaich
-Midget_1990
And people I forget for making this possible.
Thank you all
Let's start building your own WM6 Pro
http://rapidshare.com/files/31305034/DEV_UNI.rar.html
Uploading second release.....
First was based on the source, this time it's based on Midget's latest rom build!
CE OS 5.2.1413 (Build 17913.0.3.0)
ROM version: 2.20.02
http://vidmes.com/Uni/Kitchens/midget_1990/
@TehPenguin: Thank you for your time and hosting
Cheers,
Leo
Rapidshare problem
I'm having problems uploading to Rapidshare
Sorry, I restart my computer and try again.
Leo
Laurentius26 said:
I'm having problems uploading to Rapidshare
Sorry, I restart my computer and try again.
Leo
Click to expand...
Click to collapse
Hey, put on either WM-Gurus or HTC-DEVS. Thanks.
CWKJ said:
Hey, put on either WM-Gurus or HTC-DEVS. Thanks.
Click to expand...
Click to collapse
Or you could briefly upload it to the ftp and let TehPenguin know to take it from there for his hosting before removing it?
Upload problem
Woeaaaa, Rapidshare takes ages or isn't working.
I need a upload adres, please help!
use WM-Gurus
Laurentius26 said:
I need a upload address, please help!
Click to expand...
Click to collapse
Use WM-Gurus... if you dont have an account, create one then send me a PM on with the username! Either on here, or on Guru's... I will activate you straight away!
from there one of us can FTP transfer it to rapidshare or another mirror!
WM-Gurus
It's done.
Leo
CWKJ said:
Hey, put on either WM-Gurus or HTC-DEVS. Thanks.
Click to expand...
Click to collapse
You guys are great
Cheers Leo, Midget et al.
Looking good so far!
One query, why does the flashing tool want to access the internet before it upgrades the device?
Super fast, super cool, super.
Right, now to customise, goodbye to powerpoint, etc. hello to Mortplayer, Pocket Breeze, Wisbar, etc.
what flashing util are you using?
it should be packaged with this:http://forum.xda-developers.com/showthread.php?t=301662
imho.
Midget_1990 said:
what flashing util are you using?
it should be packaged with this:http://forum.xda-developers.com/showthread.php?t=301662
imho.
Click to expand...
Click to collapse
Erm!
What's the difference?
What's the difference?
Click to expand...
Click to collapse
It is the official universal RUU
Now a question to the topic, dude, can you mention some release notes?(if you added/removed something from the core ROM)
Laurentius26 said:
Hi Midget,
http://rapidshare.com/files/31305034/DEV_UNI.rar.html
Click to expand...
Click to collapse
Mirrored:
http://vidmes.bur.st/Uni/Kitchens/midget_1990/DEV_UNI.rar
Enjoy!
TehPenguin said:
Mirrored:
http://vidmes.bur.st/Uni/Kitchens/midget_1990/DEV_UNI.rar
Enjoy!
Click to expand...
Click to collapse
Could you please upload the kitchen files only (other than ROM files) in a separate zip. It will be very helpful then.
ranju said:
Could you please upload the kitchen files only (other than ROM files) in a separate zip. It will be very helpful then.
Click to expand...
Click to collapse
I'm pretty sure that you need all the files that come in the RAR - I tried deleting a folder from the rar and the 'BuildOS' program proceeded to crash miserably
So if Midget or Leo could advice as to how I should split the kitchen on my server, that would be most helpful
TehPenguin said:
I'm pretty sure that you need all the files that come in the RAR - I tried deleting a folder from the rar and the 'BuildOS' program proceeded to crash miserably
So if Midget or Leo could advice as to how I should split the kitchen on my server, that would be most helpful
Click to expand...
Click to collapse
Actually I need only "BuildOS.exe" and the "boot.rgu" (if any). Will be greatful if you can...
how to create oem packs
well i want to know if i have a .cab file or a setup file for some application( lets say spb time)... how can i create a oem pack of the name, if i want to put it in my personalised rom.... is it possible... please help
About the kitchen release
Hi all,
Hope you all understand, but I only modified the kitchen a bit so that it run. I builded one rom without adding or removing OEM's.
I was very happy when I flashed and saw it running myself, so I decided to share with you all.
This is the first kitchen release based on another rom!
I want to support you all, but I also do have problems with adding or removing OEM's.
I'm working on this, and when I find out I'll let you know.
Cheers, Leo
I've started going through seeing what I can remove from my own ROM before adding my OEMs; I'll upload the 'super-vanilla' for anyone that wants to have a look or take to add their own OEMs.
As for how to make OEMs, I learned from reading the instructions of Helmi in his first post on the original kitchen and by looking at existing OEMs to see how they were made.
OEM building
Hi Kingdomraj,
I'm still working on the kitchen.
About building OEMS, there's a wiki for it made by GerardNL.
You can have a look here:
http://forum.xda-developers.com/showthread.php?t=298077
Leo
kingdomraj said:
well i want to know if i have a .cab file or a setup file for some application( lets say spb time)... how can i create a oem pack of the name, if i want to put it in my personalised rom.... is it possible... please help
Click to expand...
Click to collapse
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
anyone pls give some hint. thanks
kfluk,
I want Chinese support as well, but I want to keep the original rom for warranty and so on. But I am thinking of installing CE-Star V2.8 - would that not be sufficient for you? It gives trad/simp chinese, Japanese, pinyin and 7 other input methods, should be fully integrated in WM5/6 ...
CE-Star add additional overhead to the system. WM6 itself is MUI enabled, just add corresponding language will allow it display different language.
I planned to make few version of ROM when original ROM backup work.
kfluk said:
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
Click to expand...
Click to collapse
Hi Kfluk,
You sound like an expert to me already. At least, you know what you are doing with those "professional tools" to due with those nbh files.
I bought my Kaiser in Hong Kong, and I dumped the ROM into 4 different RAW files. I flashed my Kaiser with the HTC standard english ROM, and it works terrific for me. To support Chinese, I use CE-Star. It works fine to me me cause I don't always use Chinese. Yes, with CE-Star activated, the performance seems slower. I am trying to find a way to deactivate it if I don't need it.
With the 4 RAW files, I am finding a way to make it a executable file so that if I need to restore, I have a much simplier way. If you happen to know how to do it, please let me know.
I think I have a complete Chinese dump ROM from my Kaiser, if you want a copy, please let me know.
Hey guys,
I am not an expert and I can't give any advices...I just SPLed my CHT device and flashed to English already.
I do believe that there will be some CHT ROMs in the future.
Cheers,
I own a Tytn II and extract raw ROM out and re-package to a ROM image. While not brave enough to test it with my device.
I cannot test it until I am sure how to recover from brick when the ROM is not working.
There are many expert here provide a lot of information for rebuild a ROM. I think it should able to find out how to recover from brick.
Will test this procedure soon.
http://forum.xda-developers.com/showthread.php?t=336158
In case work, I can start to cook a chinese dish.
kfluk said:
Hello,
I follow several instruction to create a backup of CHT ROM before flash WWE ROM or cook WWE + Chinese support ROM.
The ROM is not test because I am afraid brick my device. Is there any expert here can tell how could I recover from brick if the CHT ROM won't boot?
I think it can follow pof's instruction here: http://forum.xda-developers.com/showthread.php?t=334678
But what if the CHT ROM already damaged?
Base on procedure below, is my ROM working?
In short, my procedure is as below:
1. Create dump of ROM by use pdocread.
2. Get part02.raw
3. Get RUU_Signed.nbh from Cooked ROM and use NBHextract to get 03_OS.nb
4. Run (from Imgfs v2) NBDumpKaiser.bat to dump ROM
5. I don't add/remove item at the moment because want to get complete original ROM
6. Run NBBuildKaiser.bat to build 03_OS.nb
7. Use Dark Simpson tool to create RUU_Signed.nbh
8. Replace RUU_Signed.nbh in Cooded ROM at 3.
Thanks a lot in advance. And hope to contribute soon.
kfluk
Click to expand...
Click to collapse
ey man, you must be care to have HardSPL (don't use SSPL) to unbrick your Kaiser if the flash goes bad....
Second one, the process you describe to get a ROM from dumped raw files is good (you don't need to dump the ROM for backup purpose), you can see this other one i post yesterday http://forum.xda-developers.com/showthread.php?t=337066 to compare with yours.
Regards.
I am using ATT tilt now, but I want to flash original HTC kaiser english Rom which does not support chinese(T/S), is there anyway you can put chinese code plugins into HTC kaiser english rom?
I am a newbie on WM phone, so i want to hear more from you guys who want to keep original kaiser english ROM and want it supports (T/S)chinese input without cestar.
Yes.. anyone can use the part02.raw to create a chinese cab? I've seen somebody did that on other device before. By the way, CE-star is great to just viewing chinese in WM6, but if you try to write, it will screw up and need to soft-reset.
hi jcespi2005,
I already flash HardSPL to my kaiser for preparation.
but if my CHT ROM not working after flash. is it mean I can recover with HardSPL? or use MicroSD flash method? I stopped because can't find recover method.
My ROM is unlock CHT version from HTC. So I want to backup in case need return for repairing. I have a question, why do you think I don't need backup ROM?
For the ROM re-construction. I read your post and many other for reference when I start learn how to cook ROM.
thanks for your work and comments.
hi ronan_zj,
To add chinese sip, pls read this thread. It describe how to use CHT input in WWE ROM.
http://www.studiokuma.com/wm/?section=support
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Waiting for your good news!
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Looking forward to hearing your good news. Could you upload your "masterpiece" once finish? I think I can stop working my own ROM, seems i can never get it done.
how about English ROM with T/S chinese cab?
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Great
When you finish, post the upload link to updete my post with all the reconstructed ROMs made by ppl.
Cheers.
kfluk said:
Hi all,
With jcespi2005's help. CHT ROM re-construction almost done. Hope to create first image soon.
kfluk
Click to expand...
Click to collapse
Please let us know when you are done. I have a friend in Taiwan that will get a Tilt soon (very my help as HTC sell Kaiser for over 800 in Taiwan) and Chinese support is a must for him..
L8
species8472_rules said:
Please let us know when you are done. I have a friend in Taiwan that will get a Tilt soon (very my help as HTC sell Kaiser for over 800 in Taiwan) and Chinese support is a must for him..
L8
Click to expand...
Click to collapse
Hello L8,
The re-constructed ROM has some problem. After flash, it does not boot correctly. I am using WWE ROM now. Will try to figure out what's wrong.
kfluk
Taiwan CHT rom dump is required...
Despretly need a CHT rom of a Taiwan Kaiser... Can somebody who owns Kaiser from Taiwan dump the rom ? and provide the parts of a complete Rom Dump?
I bricked my device and it is unlocked and I need a Taiwanies rom to recover.
Hello, we're working on making our tornados sdhc compatible, so could anyone upload me these files taken from a VOX Rom??
OMAP850_SDHC_MUX.DLL
sdbus.dll
sdmemory.dll
Thanks in advance !
No more help needed, I have finally learned to dump
here you go bro
Hi.
Be carefull with file OMAP850_SDHC_MUX.DLL, if it was taken from HTC 1.15 rom, it`s buggy file. A lot of problems we have in vox with that file in this rom.
mancom said:
Hi.
Be carefull with file OMAP850_SDHC_MUX.DLL, if it was taken from HTC 1.15 rom, it`s buggy file. A lot of problems we have in vox with that file in this rom.
Click to expand...
Click to collapse
Hello, thanks for help guys I've taken my files from HTC_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90 so is it buggy? Because I don't generally know much about Vox roms because my phone is Tornado and i just need a few files to try making SDHC available. I've got another request, could anyone make me a full registry dump of Vox? I mean one saved in a .reg file or anything readable if you don't know how i'll try to explain. Thanks in advance jockyw2001, where did you take your files from ? are they better than mine taken from HTC_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90? Greetings
kartam said:
Hello, thanks for help guys I've taken my files from HTC_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90 so is it buggy? Because I don't generally know much about Vox roms because my phone is Tornado and i just need a few files to try making SDHC available. I've got another request, could anyone make me a full registry dump of Vox? I mean one saved in a .reg file or anything readable if you don't know how i'll try to explain. Thanks in advance jockyw2001, where did you take your files from ? are they better than mine taken from HTC_Vox_ARA_1.27.415.4_4.1.13.47_02.98.90? Greetings
Click to expand...
Click to collapse
Not to worry, files from ARA 1.27 look to be ok, no problems with these on this rom. Only files from 1.15 are no good to be used in development.
Good luck anyway.
Which part of the registry do you need? All of them? I can upload the if you want!
frauhottelmann said:
Which part of the registry do you need? All of them? I can upload the if you want!
Click to expand...
Click to collapse
Well yes I'd prefer all. Thanks! I really appreciate your help