Hi,
I have a ATT fuze flashed with Touch Pro ROM that will pop up a connection setting whenever I insert a new SIM card. The setting will detect the carrier and auto set up the gprs and all other connection.
Now I got a T-mobile HD2 and flashed with some Chinese ROM. The phone doesn't have this connection setting tool, so I have to set up the connection by my own even I am using T-mobile service.
Moreover, when I check on the region setting, only China has left.
Is there a cab I can restore all region back and also install the connection setting tool?
Related
I a noob just got my first Pocket pc
AT&T Fuze.
I wondering if I lose my connection to At&t or does than only matter on the sim card.
And it the rom is just a different version of windows with modications.
Thank in advance,
Loading a new rom will not effect your service plan.
Also, if you've loaded a ROM that doesn't have the ATT network settings, be sure to either manually install them or use Connection wizard so that you can connect to the network.
kareem9nba said:
Also, if you've loaded a ROM that doesn't have the ATT network settings, be sure to either manually install them or use Connection wizard so that you can connect to the network.
Click to expand...
Click to collapse
just to specify, your phone connects to att thriough setting on your phone (kind of like setting up dial-up) you have to tell in what you are connecting to. again this is local and does not effect your data plan. you can get all the settings from the att site.
Hi friends,
I recently bought a HTC HD2 locked to T Mobile in UK. I used a Rebel sim to unlock it and I am now using it on O2.
However I am not able to start internet, neither can I receive settings from O2.
The message that gets displayed tell the phone as pre set T Mobile internet settings and these cannot be changed
Is there anyway I can bypass these? Anyone else faced same thing before?
Thanks
Metal
can't you manually change the apn to that of o2?
Rudegar,
Thanks for your reply.
I cannot change the apn as all the settings are for T Mobile and I cant change them.
I tried using all the settings but no use. I can start the internet using Wifi but not through operator internet.
When I go to the new connection set up I am asked to select country (i select as UK), then I am asked to select operator and only option I have is T - Mobile.
Besides when I click on any browser, I get the T Mobile flash screen and then the browser starts.
I get an error as I am not a T Mobile customer. I have a link for settings there. When I click that it says -
This connection is pre configured. It cannot be modified.
I have a Verizon TP2 and have unlocked the SIM. I'm heading for Ireland next week and have purchased a prepaid GSM SIM for use in Ireland. Do I need to reset any of the Phone Settings on my TP2 or will it automatically make the changes when I insert the SIM and turn it on in Ireland. Thanks.
cgtayloriii said:
I have a Verizon TP2 and have unlocked the SIM. I'm heading for Ireland next week and have purchased a prepaid GSM SIM for use in Ireland. Do I need to reset any of the Phone Settings on my TP2 or will it automatically make the changes when I insert the SIM and turn it on in Ireland. Thanks.
Click to expand...
Click to collapse
i am using sprint TP2, easy switch to GSM network, just go to setting/connection management/phone setting/network
choose GSM ONLY, then system will search GSM network automatically
remember insert GSM SIM card in the phone first
You will have to get data connection setting for the prepaid provider if you want to use your data connection
Rhodium500 said:
You will have to get data connection setting for the prepaid provider if you want to use your data connection
Click to expand...
Click to collapse
That is what happend to me with my VZW TP2 in Greece.
Switching to GSM only worked for the phone but I need settings for SMS and Data.
Got the settings but VZW put some kind of lock on the connections settings app. My settings would always revert back to the vzw settings and I would always get connection failur pop up.
Got back home and found online some details about "CMGaurdian"
This program either locks the conection manager or imediately reverts changes back to stock. I think you may need to disable this in registry to enable data and out going sms reliably.
My father is using Tab2 (P3100). Running Stock OS, Unrooted. 3G Data Connection from Vodafone Delhi India.
since a month or so back he found a update notice and upgraded the Stock Firmware to Latest 4.1.2 using WIFI
Not sure but might be since then, Whenever he's On Roaming, Data Connection Won't work.
Currently He's in U.P. circle it won't connect, Voda has 3G Service here, And I use it everyday at home/city wide.
Tried following:-
1). Checked APN Settings, they are correct.
2). Checked Data Roaming in Mobile Networks.
3). Tried Switching to GSM Only, and WDMA Only, WCDMA/GSM Auto Option, All options same result.
4). Checked wifi is OFF, and Data Connection IS Enabled, using Widgets or APPS but it won't turn on
5). Took out the SIM from Tab2, and Inserted In my Android Phone and 3G/2G Connects Instantly.
6). Put A different SIM which is from my Region but as its not On Roaming, Data Works fine.
7). Checked with operator they have no clue whats wrong in the TAB.
8). Requested Fresh APN Settings from Operator and saved it, But Tab2 won't connect.
Can someone shed some light if this is a BUG in current latest firmware of Tab2 or I am getting and my brain fails to finds a solution.
Any help will be appreciated, don't let me down my fellow members pleaseeeeee
Hello!
I have this s10e from Verizon and it is network unlock (I talked to Verizon to confirm this), well I bought it new and as soon as I turn it on, it started to upgrade to Android 11. All the update went without any issue, anyway when update was completed. I inserted my SIM card and I did not connect to the mobile network. I went to settings and open connections > Mobile networks change from Global to LTE/GSM/UMTS and manual to select the network. Network selected and I got the message "Can't register on the network" , I try again and it connects but after some minutes it lost the signal and got the message "Unable to connect, try later"
I have try several options, all with the same result, it connects for a while then it lost the connection and it won't reconnect until I try it manually...
These is what I have tried (not ordered in the way I tried them)
- Network Reset (including APN reset to default)
- Manually select the network (I go from Global to LTE/GSM/UMTS and backwards)
- Pull out the SIM, turn off the cell, insert SIM turn it on. When phone turns on sometimes it connects immediately to the mobile network but after it completes the initialization, the cell disconects.
- Erase the cache from the Phone app.
- Wipe cache
- Factory reset
I know it is not the phone because I have a Verizon SIM card and when I inserted it, the cell works flawless, actually since I'm out of USA, the cell connects to the same mobile network (on roaming) I'm trying to use with my SIM card. So I was thinking of downgrade to Android 11 but I found some threads where they reported the same issue (with Android 10) but no solution or they pointed to the workarounds I already tried so I don't think it is an Android 11 bug.
Does anyone knows something about this? any workaround?
Thank you!!
Borrego97 said:
Hello!
I have this s10e from Verizon and it is network unlock (I talked to Verizon to confirm this), well I bought it new and as soon as I turn it on, it started to upgrade to Android 11. All the update went without any issue, anyway when update was completed. I inserted my SIM card and I did not connect to the mobile network. I went to settings and open connections > Mobile networks change from Global to LTE/GSM/UMTS and manual to select the network. Network selected and I got the message "Can't register on the network" , I try again and it connects but after some minutes it lost the signal and got the message "Unable to connect, try later"
I have try several options, all with the same result, it connects for a while then it lost the connection and it won't reconnect until I try it manually...
These is what I have tried (not ordered in the way I tried them)
- Network Reset (including APN reset to default)
- Manually select the network (I go from Global to LTE/GSM/UMTS and backwards)
- Pull out the SIM, turn off the cell, insert SIM turn it on. When phone turns on sometimes it connects immediately to the mobile network but after it completes the initialization, the cell disconects.
- Erase the cache from the Phone app.
- Wipe cache
- Factory reset
I know it is not the phone because I have a Verizon SIM card and when I inserted it, the cell works flawless, actually since I'm out of USA, the cell connects to the same mobile network (on roaming) I'm trying to use with my SIM card. So I was thinking of downgrade to Android 11 but I found some threads where they reported the same issue (with Android 10) but no solution or they pointed to the workarounds I already tried so I don't think it is an Android 11 bug.
Does anyone knows something about this? any workaround?
Thank you!!
Click to expand...
Click to collapse
Just guessing as your have already tried many things.
Maybe you still have Verizon CSC installed what works fine with the Verizon SIM card, but leads to unstable mobile connection with another SIM card.
To check, download unbranded firmware for your region and flash it with Odin on PC via USB cable to your phone.
Use the CSC file ... Not the Home_CSC. This will wipe your data.
How this will help.
It_ler said:
Just guessing as your have already tried many things.
Maybe you still have Verizon CSC installed what works fine with the Verizon SIM card, but leads to unstable mobile connection with another SIM card.
To check, download unbranded firmware for your region and flash it with Odin on PC via USB cable to your phone.
Use the CSC file ... Not the Home_CSC. This will wipe your data.
How this will help.
Click to expand...
Click to collapse
Thank you It_ler! I will give it a try!