I have version 3.0.1.6 installed in my ROM. I would like to know if I was to update it to the latest version 4.1.0 do I install it in my Device Memory to override the old version. If this doesnt override the old version and I end up with 2 versions then would I be better off installing it on my Storage Device?
You should be able to upgrade your cooked version but I'm not 100% sure. See if you get upgrade warning.
Always install GPS apps to device.
Bruce Inman said:
You should be able to upgrade your cooked version but I'm not 100% sure. See if you get upgrade warning.
Always install GPS apps to device.
Click to expand...
Click to collapse
I have TomTom Navigator installed on my Storage Device and never had a problem with it running there.
plapic said:
I have TomTom Navigator installed on my Storage Device and never had a problem with it running there.
Click to expand...
Click to collapse
If it's like iGo, it installs resources to SD but it still puts Program Files\IiGo\iGo.exe.
I'm not saying its impossible, just not a good idea.
For me voice search doesn't work as it just opens the dialer.
You would think they'd put a softkey on it instead of a hardware key....
Anybody got it to work yet?
Works for me!
Voive search works for me, Bruce. i press the talk button and just speak. Working just fine.
codhunter said:
Voive search works for me, Bruce. i press the talk button and just speak. Working just fine.
Click to expand...
Click to collapse
Hmmm interesting, it just opens my dialer.
Perhaps Keyboard controller is interfering.
Thanks for the heads up!
Related
I have MS Voice Command UK version. I'm using the very stable WM6 ROM from jwright; is it possible to change the US version to the UK version so it recognises the dial pattern correctly?
If it is possible, it would make my device perfect.
I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks
jasonkruys said:
I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks
Click to expand...
Click to collapse
Jason,
This has been available for ages, try http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
Regards
Mav
Where I got it from, in fact.
Thanks guys, I'm sure I looked there before, but only saw the 1.5 version..Got it now
I don't use this ROM, so I'm only guessing here. Presumably Voice Command does not show up in Remove Programs.
In which case you could unlock the extended ROM and replace the MSVC US cab with your MSVC UK cab and do a hard reset. Your version should then get installed (at the expense of all you installed programs and setting obviously).
Or has JWright done something more clever with his ROM to get MSVC on there?
Mike
Voice Command is integrated into the core ROM on WM6.
Although you can still install the UK version, it will use up storage space, but it should still work, it was what I did on the earlier WM6 builds to get the bluetooth button issue resolved, and always worked fine.
Hi,
Just thought i'd share the news that tomtom home now works and syncs with the touch pro, so start buying your maps!!!!
Download the latest version from Tomtom
thanks for the tip!
but I can't seem to get any mapshare updates....
will play with my settings to see if that might do the trick
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
i get the same also, and all the tweeks suggested in the kaiser forum dont work.
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
dirkmeissner said:
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
Click to expand...
Click to collapse
Sounds to me like you haven't enabled map sharing in TomTom on your phone. I had the same until I did that, and now it works fine.
i've upgraded to the latest version, and have enabled map share in both tomtom home and on the device. I still can not get map share to update.
I'm not sure then. The only difference between what I said and just enabling map corrections was that I reported one (I have been living in my current house for >4 years and TomTom still don't have it as a valid address. I have reported it several times through MapShare and it still doesn't appear as valid).
Ok, i will give that a try - my estate sill has roads that don't exist and although they have been reported many times, have still not been corrected. The 7.25 maps still don't seem that upto date for my area!
Have you / are you using tomtom traffic. I enabled the month trial, and it appears to update ok, but i never see any traffic information on the traffic map. The update symbol changes to green after an update, therefore indicating that it has downloaded data. On the liscence screen, it reports that traffic is enabled upto 22/10/08.
Thx it works fine. I had 65000 changes for my 6.8 Europacard.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
cyron_at said:
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
Click to expand...
Click to collapse
It can be found a few posts below this one. however if you cant search, heres the thread
http://forum.xda-developers.com/showthread.php?t=427744
http://forum.xda-developers.com/showthread.php?t=427744&page=2
post #19
yes, i'm using west & central europe 2GB 7.25.1981 and it works just fine
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
DonDie said:
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
Click to expand...
Click to collapse
mine is installed on the phones memory. only the map is on the storage card.
no problems here with TT Home 2.4
You need to make sure that tomtom app is installed within programs. Depending on what cab you have used, it may have installed the application under a strange (german i think) folder name.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
kc1 said:
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
Click to expand...
Click to collapse
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Xtreme XL said:
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Click to expand...
Click to collapse
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
ardsar said:
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
Click to expand...
Click to collapse
I basicly tried every setting in Tomtom and in Tomtom Home, and suddenly it all worked.
perhaps a stupid question, but did you allready try to mess with the settings in TTH/extra/mapshare prefferences..... and what does it say in the bottom right corner: After this update ...Mb??
just press OK and let the update run
hope it helps!
Whats up guys
Just got my hands on a new touch pro, after having the titan and its a great upgrade!
However, neither sprint telenav or google maps want to get a gps fix out of the box. I can't find a settings option for GPS, only external GPS devices.
Whats going on? Is this a problem with the touch pro? Am I going to be forced to flash ROMs just to make navi work? Or should I go to the store and grab a new one?
Thanks guys
Joe
BTW: ROM v. 1.03.651.4
you tried updating the "quickgps" in PROGRAM? Mine too (xperia) wasnt getting any fix, till i update the QuickGps prog.
If this is missing, which i doubt, am sure you can get a cab in this forum. Install and update. Hopefully should work.
if still prob, get it changed
Synned said:
Whats up guys
Just got my hands on a new touch pro, after having the titan and its a great upgrade!
However, neither sprint telenav or google maps want to get a gps fix out of the box. I can't find a settings option for GPS, only external GPS devices.
Whats going on? Is this a problem with the touch pro? Am I going to be forced to flash ROMs just to make navi work? Or should I go to the store and grab a new one?
Thanks guys
Joe
BTW: ROM v. 1.03.651.4
Click to expand...
Click to collapse
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
UPDATE:
I have taken the original zip from tomtom and removed the unpatched tomtom navigator.exe and data.chk and replaced them with the ones in the previous link. This is a cab file so should be easier to install.
I have not tested this so feed back appreciated but as always ensure you have a full backup. there are no BT files in this also. This is only for the HD2.
Link Here
For people still having issues with tomtom home NOT working, see post #33 below.
Thanks Zomig. Right here I go off to buy TT Maps....
Any significant differences in this version? Any Traffic updates?
zomig said:
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
Click to expand...
Click to collapse
Is QVGA version?
Just a quick query & probably a dumb one so apologies in advance. I have a 2 year old TomTom 1 V1 on which the screen has just died. Am I able in any way to use the maps on the SD card with with the linked to program on my HD2? Will probably just activate co pilot to be honest but wondered if this was possible as the software is leagal just old. Thanks up front for any help
fotone said:
Is QVGA version?
Click to expand...
Click to collapse
Is QVGA version?
zomig said:
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
Click to expand...
Click to collapse
Does it have the BT files removed?
Regards.
maybe it's better to mirror it outside rapidshare (it sucks)
I was using v7.916 and I just installed this one.
Really no difference at all. Its exactly the same.
Maybe there is an option I cant see?
You only have to replace the files in your tom tom directory. No further activation is needed.
biofotis said:
I was using v7.916 and I just installed this one. Really no difference at all. Its exactly the same.
Click to expand...
Click to collapse
thank you, so I still use v.7.916 (9189)
biofotis said:
Maybe there is an option I cant see?
Click to expand...
Click to collapse
maybe the only difference is:
zoomig said:
...including using tomtom home
Click to expand...
Click to collapse
Looking Glass said:
Does it have the BT files removed?
Regards.
Click to expand...
Click to collapse
It's 2 files you need to replace, so you begin with installing a version containing the BT files.
it's always the same with these releases, they usually just fix issues with not working with certain devices. Also i believe this is a wvga version although I am sure someone will correct me if I am wrong.
Just a quick query & probably a dumb one so apologies in advance. I have a 2 year old TomTom 1 V1 on which the screen has just died. Am I able in any way to use the maps on the SD card with with the linked to program on my HD2? Will probably just activate co pilot to be honest but wondered if this was possible as the software is leagal just old. Thanks up front for any help
Click to expand...
Click to collapse
You will need to get the maps reactivated through Tomtom as these will be tied to your v1 device. Also they may not work due to differences with PNA and PDA Type maps. Check with tomtom if in doubt.
I really hate rapidshare. It never works.
If you can, can you please post the file somewhere else.
Regards
tamAyT said:
It's 2 files you need to replace, so you begin with installing a version containing the BT files.
Click to expand...
Click to collapse
Nope! In the HD2 if you install T*T* "as is" you'll screw-up your BT functions, plus endless BT error messages, etc., it's all over the GPS forums.
In other releases people removed the BT files from the .cab, so your worries are over (as far as interference among different BT stacks)
I wouldn't dare to start all over again if the BT files are NOT removed from this cab.
Can anyone confirm?
Regards.
Nope! In the HD2 if you install T*T* "as is" you'll screw-up your BT functions, plus endless BT error messages, etc., it's all over the GPS forums.
In other releases people removed the BT files from the .cab, so your worries are over (as far as interference among different BT stacks)
I wouldn't dare to start all over again if the BT files are NOT removed from this cab.
Can anyone confirm?
Regards.
Click to expand...
Click to collapse
If you downloaded the file you will see that it is just 2 files which just need to be copied over to your device. There is NO bt files in this rar file.
If you want the cab install I will post it when I get it.
I tried it and doesnt work woth TT Home...
zomig said:
You will need to get the maps reactivated through Tomtom as these will be tied to your v1 device. Also they may not work due to differences with PNA and PDA Type maps. Check with tomtom if in doubt.
Click to expand...
Click to collapse
I shall indeed do that. Thanks for taking the time to read & answer my query, appreciate it.
I tried it and doesnt work woth TT Home...
Click to expand...
Click to collapse
Take out the memory card from the phone and put into card reader in pc. this works with tomtom home.
I shall indeed do that. Thanks for taking the time to read & answer my query, appreciate it.
Click to expand...
Click to collapse
best of luck though as tomtom support are known for being less than helpful.
I have just stumbled across this The .cab file linked from the Digital Spy forum is attached. It is an app to access Sky Remote Record from a WM device.
I have been waiting for something like this for a looooooooong time.
I have checked it out and it works and is easy to use. The only problem I have at the moment is that it does not appear to close properly... had to use task manager to close it.
does it have a monthly fee?
rip83 said:
does it have a monthly fee?
Click to expand...
Click to collapse
It is free to use m8.
I have this too.
Seg
Hi there all, first time post so be kind. Anyway, I tried to install this CAB but I get an error saying 'installation failed'. If I go to p.wecomm.com/sky directly from my phone I can download the relevant file (SkyMobile-WM6_PPCP-1.2.0.0) but all it does is open up an appearance settings page for 'Today'. Strange.
Ive had no problems downloading and installing Co0kie's Home Tab Editor, BsB Tweaks, Microsoft .NET etc. so I don't think it's me (but I could be wrong).
Has anyone had this problem and resolved it, or can think of something else I can try?
Arpers said:
Hi there all, first time post so be kind. Anyway, I tried to install this CAB but I get an error saying 'installation failed'. If I go to p.wecomm.com/sky directly from my phone I can download the relevant file (SkyMobile-WM6_PPCP-1.2.0.0) but all it does is open up an appearance settings page for 'Today'. Strange.
Ive had no problems downloading and installing Co0kie's Home Tab Editor, BsB Tweaks, Microsoft .NET etc. so I don't think it's me (but I could be wrong).
Has anyone had this problem and resolved it, or can think of something else I can try?
Click to expand...
Click to collapse
I downloaded from the site and installed without a problem. The only problem i have is that it does not close. If i use task manager to close it ,it does not work and i have to reinstall it to get it to work. The only way i can get it to work consistantly it to reset the device after i have set the recording.
It seems pretty unstable. I will keep an eye on any updates.
That's strange. I've now managed to install it ok thanks to a reply on another thread i'd started. I agree that it doesn't close but it definately gets closed via task manager and I don't have to reinstall it. Try the CAB file provided as a reply to my other post in the new thread (search for my posts - I only have three - and you'll see the thread). That CAB seemed to work fine.
Hi, I've used this for a while too and also have to open my task manager to ensure it is closed properly.
Also, I find it very difficult to type on the small keyboard when logging in....but maybe that's just my fat fingers
Hi all,
Try installing the attached cab.
It has the same name as the cab in post 1 but it's the one i use and i have no problems with it at all. Everything works as it should and it closes properly.
Hope it helps.
Great App... works very well... Now only if SKY would officially launch it
Rutster said:
Hi all,
Try installing the attached cab.
It has the same name as the cab in post 1 but it's the one i use and i have no problems with it at all. Everything works as it should and it closes properly.
Hope it helps.
Click to expand...
Click to collapse
I have to use task manager to close this version on mine!
blackrat62 said:
I have to use task manager to close this version on mine!
Click to expand...
Click to collapse
Strange. Don't need to on mine.
can you produce an underscore from the keyboard?
my user name has one and I can't enter it!
blackrat62 said:
I have to use task manager to close this version on mine!
Click to expand...
Click to collapse
Me too. I select ok on the "data total exit screen" and it drops me back to the main menu of the app. Have to press home then task manager to close it. If I then re-load the app I cannot load details of a TV programme. Thus making the app unuseable :0(
what exactly does this software do?
loaferkan said:
what exactly does this software do?
Click to expand...
Click to collapse
it lets you view sky channels and record sky programs remotely. you have to set up your sky account first (username/password) but its free and it works!
skilty said:
it lets you view sky channels and record sky programs remotely. you have to set up your sky account first (username/password) but its free and it works!
Click to expand...
Click to collapse
Doesn't work for all of us. See the "exit" problems above.
Working... mostly...
hi,
I've been using this for quite some time. It works, in the sense that I can start it, browse sky listings, get prog info and set recordings (most important features!). It is not working, or a bit poor, in the following areas... won't close (though mine does close in task manager and no restart issues), keyboard in waaaayyy too small and really hard to use, scrolling though channels is slow and tedious and there are occasional crashes.
However, it lets me record when I'm away, so I'm grateful... needs some work though to be a complete package.
im going to try this, but need to know how i can make it work for Foxtel (Australian rebranded Sky+)
HTC touch 2
I to am having problems with this app. When first installed and first time use it works ok but does fail to close. When you use again it fails to connect when you press record and times out. But only on certain pages the news channels always seems to work but all channels and the movies only work sometimes. I have tried a power off and back on but seems to make no difference. I do notice that the pass word box is emty after you have saved it so could this be a problem?
Since I flashed my ROM to Energy's I have not been able to sign into this app with my Sky ID - I get a 'failed to connect to authentication service' error. Has anyone else encountered this? Could it be due to my flashed ROM?