Hi,
Just thought i'd share the news that tomtom home now works and syncs with the touch pro, so start buying your maps!!!!
Download the latest version from Tomtom
thanks for the tip!
but I can't seem to get any mapshare updates....
will play with my settings to see if that might do the trick
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
i get the same also, and all the tweeks suggested in the kaiser forum dont work.
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
dirkmeissner said:
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
Click to expand...
Click to collapse
Sounds to me like you haven't enabled map sharing in TomTom on your phone. I had the same until I did that, and now it works fine.
i've upgraded to the latest version, and have enabled map share in both tomtom home and on the device. I still can not get map share to update.
I'm not sure then. The only difference between what I said and just enabling map corrections was that I reported one (I have been living in my current house for >4 years and TomTom still don't have it as a valid address. I have reported it several times through MapShare and it still doesn't appear as valid).
Ok, i will give that a try - my estate sill has roads that don't exist and although they have been reported many times, have still not been corrected. The 7.25 maps still don't seem that upto date for my area!
Have you / are you using tomtom traffic. I enabled the month trial, and it appears to update ok, but i never see any traffic information on the traffic map. The update symbol changes to green after an update, therefore indicating that it has downloaded data. On the liscence screen, it reports that traffic is enabled upto 22/10/08.
Thx it works fine. I had 65000 changes for my 6.8 Europacard.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
cyron_at said:
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
Click to expand...
Click to collapse
It can be found a few posts below this one. however if you cant search, heres the thread
http://forum.xda-developers.com/showthread.php?t=427744
http://forum.xda-developers.com/showthread.php?t=427744&page=2
post #19
yes, i'm using west & central europe 2GB 7.25.1981 and it works just fine
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
DonDie said:
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
Click to expand...
Click to collapse
mine is installed on the phones memory. only the map is on the storage card.
no problems here with TT Home 2.4
You need to make sure that tomtom app is installed within programs. Depending on what cab you have used, it may have installed the application under a strange (german i think) folder name.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
kc1 said:
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
Click to expand...
Click to collapse
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Xtreme XL said:
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Click to expand...
Click to collapse
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
ardsar said:
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
Click to expand...
Click to collapse
I basicly tried every setting in Tomtom and in Tomtom Home, and suddenly it all worked.
perhaps a stupid question, but did you allready try to mess with the settings in TTH/extra/mapshare prefferences..... and what does it say in the bottom right corner: After this update ...Mb??
just press OK and let the update run
hope it helps!
Related
Hi!
Does anybody know from where I can download Google Maps? No, it did not come with the phone. And yes, I know that normally you get it from www.google.com/gmm - except that all I get from there is "Sorry, Google Maps does not work on your HTC TouchDual."
Do you guys get the same message?
use internet explorer to browse google.com/gmm
this is because opera's user agent..
EnOleEikka said:
Hi!
Does anybody know from where I can download Google Maps? No, it did not come with the phone. And yes, I know that normally you get it from www.google.com/gmm - except that all I get from there is "Sorry, Google Maps does not work on your HTC TouchDual."
Do you guys get the same message?
Click to expand...
Click to collapse
To be honest I have never come across anyone who didn't have it installed as stock. Where did you get your TP from?
As for downloading it, you will need to search the forum and see if any one has extracted it from their TP as I assume it is a bespoke build for the software
l0st.prophet said:
As for downloading it, you will need to search the forum and see if any one has extracted it from their TP as I assume it is a bespoke build for the software
Click to expand...
Click to collapse
no, it's a standard build. And there were problems with it on the diamond with it not shuttiong down the GPS properly and rinsing the battery in around 2.5 to 3 hours.
go to www.google.com/gmm using INTERNET EXPLORER and download the latest version!
l0st.prophet said:
To be honest I have never come across anyone who didn't have it installed as stock. Where did you get your TP from?
Click to expand...
Click to collapse
EU units sold in expansys come without it.
I installed it no problem.
It wasn't pre-installed on mine.
zamo_x said:
use internet explorer to browse google.com/gmm
this is because opera's user agent..
Click to expand...
Click to collapse
Thanks! That worked. Didn't even occur to me to see if there is IE on this device
agreed, its such a pain in the ass to find the cab file for the latest google maps on the gmm website
sdlopez83 said:
agreed, its such a pain in the ass to find the cab file for the latest google maps on the gmm website
Click to expand...
Click to collapse
I'm not sure, but...
http://www.google.com/gmm/GoogleMaps.CAB
I just directly go to that URL with Opera Mobile (case sensitive!) and download the cab
Is the google maps install on the UK version the full version or still linked to the web?
GPS problem or Google maps problem
Hi!
With IE, I got presumably the latest version, which seems to be 2.2.0.19.
However, I can not lock into satellites at all.
Before that I had found one web-site that hosted an earler version that was very quick to find satellites - it just was missing lot of features like the favorites and was nagging all the time about updates.
So the question is, is this a problem with GM? Or the phone otherwise? Here are my settings:
Windows GPS settings:
GPS program port: COM4
GPS hardware port: (None), Baud rate: 4800
Manage GPS automatically: checked
In Google Maps, I've selected the option to get position through Windows (as opposed to manual setup).
Does anybody know any free program that I can use to check out the GPS functionality preferably in a way that would give some deeper access to functionality - like the traditional satellite view? Thanks in advance!
Forgot some details:
I've run the QuickGPS - hope that is not what is confusing the GPS now as I had just had a update before this latest version of GM?
Google Maps just sits there with "searching for GPS-satellites (0)..." and never advances the count from 0...
DO a search and you will find a thread "testing gps" where you will find a tool for "testing gps"!
http://forum.xda-developers.com/showthread.php?t=420933
Read the other threads on gps performance!!!!!
YOur first lock on satilites can take upto 20mins, even though you have updated quickgps. You need to be stationary and preferably outside.
ardsar said:
DO a search and you will find a thread "testing gps" where you will find a tool for "testing gps"!
http://forum.xda-developers.com/showthread.php?t=420933
Read the other threads on gps performance!!!!!
YOur first lock on satilites can take upto 20mins, even though you have updated quickgps. You need to be stationary and preferably outside.
Click to expand...
Click to collapse
Thanks I'll try that tool.
However, I did have older GM installed previously and it found a lock in just a few minutes. Actually GM doesn't even wait 20 min before it shows you a screen that says that it can not get a fix.
NLS said:
EU units sold in expansys come without it.
I installed it no problem.
Click to expand...
Click to collapse
I bought mine from Expansys.co.uk and mine came with it, although that was before the price drop so they may be differant units
you got the UK unit, not the EU one, possibly
NLS said:
you got the UK unit, not the EU one, possibly
Click to expand...
Click to collapse
Yes, 1.90.405.1 is the UK ROM.
Same problem with the set I bought in Singapore, no google map included, and thanks for the IE fix, weird why Opera can't do it though.
Cheers.
Same problem with the set I bought in Singapore, no google map included, and thanks for the IE fix, weird why Opera can't do it though.
Cheers.
I just wanted to say, that my Touch Pro doesn't have GoogleMaps preinstalled
Evening guys.
Ok, think I have sealed my own fate to some extent here, but hoping there might be a solution.
I had a Kaiser which I installed TomTom 7 on using the hack whereby you buy the maps for the GO 720 and trick the Home app into thinking that it is a 720 (before the diamond maps were available - what can I say, I'm impatient! ;-) )
Anyway, predictably, I've now got my TP and have installed the tomtom 7 cab onto the device. However, it tells me that activation failed. I would go to the ttcodes.com website, but for some reason I can't find the damned product code for the maps on my tt account page (it says "product code , " instead of a number??!).
All I want to do is "unactivate" the maps somehow and then do an OTA refresh with my new product/device code. Is this possible?
To be honest, I'm a bit fed up with TomTom these days. I've spent literally hundreds of pounds on them over the past few years and upgrading on PDA is always either incredibly difficult or lags behind the TomTom hardware. If I can't get this sorted, I might just cut my losses and give ALK a new customer...
Cheers guys
squiggs
what version of Tomtom did you install?? 7.450 or 7.451
To change is easy however you can only change your device once in 6 month period. in tt find your product code - press the satellitestrength button followed by pressing on version number. In this list you will find your product code. Goto tomtom web site, log into your account and goto change my device at the bottom of the screen you can type in your new device product code. once done, you then need to download your map to tom tom home as the activation code will be different within the file. Sync your tp and all should work.
let me know if map share and traffic work. I can not get these to work.
@ Xtreme - installed 7.451
@ Ardsar - THanks, but the problem is, I can't get that far. It asks me to choose a map, so I choose my UK & Ireland map and it throws up the activation error.
Thoughts?
cheers
squiggs1982;2704762 said:
@ Ardsar - THanks, but the problem is, I can't get that far. It asks me to choose a map, so I choose my UK & Ireland map and it throws up the activation error.
Thoughts?
cheers
Click to expand...
Click to collapse
copy the ttnavigator.BIF from the root of your memorycard to your pc and open it with Notepad.
now you can read your devicecode
have you contacted TomTom already with this problem?
also delete your map - it should then let you download a free city map if you havnt done so yet.
Aha!
I've deleted the map and downloaded the freebie. Will work on work on it from both angles.
Haven't contacted TomTom yet (was hoping to avoid the pain!) but will do if I can't get anywhere.
Will let you know how I get on.
Thanks
Squiggs
Arrgh! It now shows the map for download on TomTom home but says "This item does not work on your device. Therefore it cannot be installed".
It obviously realises that it's not a 720 but that's what the map's for.
Have you vchanged your code on tomtom website? The map on your pc is prob still for your old device. Goto my maps on tomtom web site and re download. (move your old map to an area outside of tomtom home just incase it goes wrong. usually found under my docs/tomtom/downloads (or similar)
Hi again guys,
Ok - checked the tomtom website and compared to the product code that's on my account website, but they are already the same? I can only assume that TomTom home synchronises the two?
TomTom home still says "This item does not work on your device. Therefore it cannot be installed".
Any thoughts? I'm thinking that even if I speak to TomTom, they'll just say I shouldn't have bought the 720 map for the Kaiser and just to buy new maps? Seems to be the way they normally work. :-(
EDIT: I should note that there is no trace of my UK map on the device. Just the fresh TT install and my free download map of my area that I got last night.
squiggs1982 said:
Hi again guys,
Ok - checked the tomtom website and compared to the product code that's on my account website, but they are already the same? I can only assume that TomTom home synchronises the two?
TomTom home still says "This item does not work on your device. Therefore it cannot be installed".
Any thoughts? I'm thinking that even if I speak to TomTom, they'll just say I shouldn't have bought the 720 map for the Kaiser and just to buy new maps? Seems to be the way they normally work. :-(
EDIT: I should note that there is no trace of my UK map on the device. Just the fresh TT install and my free download map of my area that I got last night.
Click to expand...
Click to collapse
Just a thought - did you delete your maps from tomtom home and your pc? If not i suggest you try backing them up to CD or something, remove them and try again. I'm not sure at what point the activation code is generated - ie when you install or download. Failing this, i guess x20 maps are not compatible.
Unfortunately, if you contact tomtom, they will just tell you to go away as version 7 is not released and supported in the UK. Sorry mate, i dont know what else to suggest. I used 710 maps on my kaiser which worked fine, i guess the x20 version maps are just to different.
Delete mapname.meta.dct and reactivate or generate a new .meta.dct by using a tt8_keygen.
ardsar said:
Just a thought - did you delete your maps from tomtom home and your pc? If not i suggest you try backing them up to CD or something, remove them and try again. I'm not sure at what point the activation code is generated - ie when you install or download. Failing this, i guess x20 maps are not compatible.
Unfortunately, if you contact tomtom, they will just tell you to go away as version 7 is not released and supported in the UK. Sorry mate, i dont know what else to suggest. I used 710 maps on my kaiser which worked fine, i guess the x20 version maps are just to different.
Click to expand...
Click to collapse
Thanks ardsar. Tried all that I'm afraid. Think it's time to walk to ALK. Ho hum :-(
squiggs1982 said:
Thanks ardsar. Tried all that I'm afraid. Think it's time to walk to ALK. Ho hum :-(
Click to expand...
Click to collapse
Guess you have a choice to either buy the correct maps or move to ALK. I have Navigator live 7 (touch diamond edition) and i was not that impressed by it. Scrolling around the map is very very slow compared to tomtom, and the traffic module is not user friendly at all and requires intervention whilst driving!. Also they use navteq for their mapping data however the latest map is about 9 - 12 months out of date, although some of the road changes that have happened in my area are more up to date. From what i understand, tomtom will be releasing version 7 at some time so you may want to hang it there. Somehow, traffic started working last night, so i am happy now!
Hi all,
I see that you can now download tomtom v7.916 here
http://forum.xda-developers.com/showthread.php?t=556316
which would be the best version for the TD2 ( or an old spv m700 for that matter as thats what i use for sat nav in the car) the QVGA or the VGA
am really interested in the type for each phone
also what version maps should i be buying? I am guessing v8 but does it matter which version map
thanks in advance
Andy
stringman said:
Hi all,
I see that you can now download tomtom v7.916 here
http://forum.xda-developers.com/showthread.php?t=556316
which would be the best version for the TD2 ( or an old spv m700 for that matter as thats what i use for sat nav in the car) the QVGA or the VGA
am really interested in the type for each phone
also what version maps should i be buying? I am guessing v8 but does it matter which version map
thanks in advance
Andy
Click to expand...
Click to collapse
Mod Edit: Warez is not permitted on XDA first and final warning
In my signature you can see what i have on my TD2 and it works like a charm.
I would upload the .cab but thats not alowd here i'm sorry
Also remember that u install NETCFv35.wm.armv4i and the file down here.
thanks guys
thats the td2 sorted i have got 7.45 but the keyboard is so small!!
anyideas on the spv m700
I have tomtom6 on which works fine but i want to be able to change the cursor colour so i am thinking of the 916.
any idea if the td2 version will work.
finally is there way to find out what maps are compatable with each version
thanks in advance
help
hi mate
wondering if you could help.
trying to setup tt with the setup you have, tt keeps telling me 'no maps found' ?
I have placed them in the root of the sd card and they have ben activated, where am i going wrong?
any help would be greatly appreciated
Thanks in advance
It was such a long time ago that i am afraid i cant remember.
i do remember trawling through lots of posts on here and remember seeing lots of post similar post to yours ( and answers)
best thing is to do a search
sorry i can help any more
yasinism said:
hi mate
wondering if you could help.
trying to setup tt with the setup you have, tt keeps telling me 'no maps found' ?
I have placed them in the root of the sd card and they have ben activated, where am i going wrong?
any help would be greatly appreciated
Thanks in advance
Click to expand...
Click to collapse
..try to move them to the "My Documents" directory...
An other issue could be that the maps you are using are not compatible with your tomtom version..
Thanks for all the advice people.
I have managed to get it working, i had to create a 'CurrentMap.dat' file and place it in '\My Documents\TomTom'. This tells tomtom which map to look for.
forum.xda-developers.com/archive/index.php/t-268022 .html
Works great now!
djg269 said:
In my signature you can see what i have on my TD2 and it works like a charm.
I would upload the .cab but thats not alowd here i'm sorry
Now look here
Also remember that u install NETCFv35.wm.armv4i and the file down here.
Click to expand...
Click to collapse
With WM 6.5 you don't need the TomTom Audio Fix anymore
All 7 versions of TomTom wil work with the HTC TD2.
I have had 7.450, 7.915, 7.916 and many different builds.
Now I have v7.916 Build 9192.
There is a new version of TT
TomTom Navigator 7.918.9193
can anyone please let me know what settings you use for Tomtom 7?
For example, do you select the "internal gps" or "other enmea"? If you select the "Other .." then what "COM" and "Baud Rate" do you use?
I have wm6.5 and tomtom 7.45.
Thanks
It depends what you are using
What is your device?
Do you use an external GPS device?
I use what is in my signature en because i use GPSModdriver i take
other nmea - 9600 baud - GPSModdriver
InformationTechnology said:
can anyone please let me know what settings you use for Tomtom 7?
For example, do you select the "internal gps" or "other enmea"? If you select the "Other .." then what "COM" and "Baud Rate" do you use?
I have wm6.5 and tomtom 7.45.
Thanks
Click to expand...
Click to collapse
If you select "Other", choose COM4, baud rate can be 4800 or more, 19200 may be a good choice. Note that some versions of Tomtom 7 do not show properly the list of received satellites, both with "internal Gps" or "Other..."
One most recent version of Tomtom solves this problem and also solves the audio cutoff issue (for WM6.1 users).
Aikon
my device is diamond2 and i have installed tt7.45 on it successfully but i do not get any gps signal.
i was wondering is there any particular set up required for it to work?
No i have the TD2 also and in the beginning i used internal GPS and it worked great accept for the lag.
Go to settings from windows and go to external GPS
in Programs my setting says COM4
in Hardware my settings says None and 4800
in the third tab(toegang in dutch) chek the box
Try to install the latest version of TomTom Navigator 7.917.9186
and use GPS Mod Driver http://forum.xda-developers.com/showthread.php?t=571266
InformationTechnology said:
my device is diamond2 and i have installed tt7.45 on it successfully but i do not get any gps signal.
i was wondering is there any particular set up required for it to work?
Click to expand...
Click to collapse
...try to get outdoor ;-)
Download the latest Quickgps.
How long did you wait?
I tried outside including on top of the roof at work!!! waited for 30 mins, to signal at all!!!! not even one grey bars!!!
I have the TT 7.45, wm6.5 (official). I have run quick GPS a couple of times as well.
I was wondering if it would help if I cohse to install a custom FW like Dutty's.
But I will try to get the latest TT and GPS Mod Driver and report back here on how I get on.
thanks
InformationTechnology said:
I tried outside including on top of the roof at work!!! waited for 30 mins, to signal at all!!!! not even one grey bars!!!
I have the TT 7.45, wm6.5 (official). I have run quick GPS a couple of times as well.
I was wondering if it would help if I cohse to install a custom FW like Dutty's.
But I will try to get the latest TT and GPS Mod Driver and report back here on how I get on.
thanks
Click to expand...
Click to collapse
really strange; I never had such problems; I also didn't need the gps mod driver;
How is tt configured? Built in receiver?
Cyron - which version of TT have you installed?
What settings have you applied (internal GPS, or NMEA with com4)?
thanks
InformationTechnology said:
Cyron - which version of TT have you installed?
What settings have you applied (internal GPS, or NMEA with com4)?
thanks
Click to expand...
Click to collapse
..I had all version installed; actualy I use the latest one.
My Settings: Internal GPS
Edit: You can try Google maps (active GPS) to find the satelites.
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
UPDATE:
I have taken the original zip from tomtom and removed the unpatched tomtom navigator.exe and data.chk and replaced them with the ones in the previous link. This is a cab file so should be easier to install.
I have not tested this so feed back appreciated but as always ensure you have a full backup. there are no BT files in this also. This is only for the HD2.
Link Here
For people still having issues with tomtom home NOT working, see post #33 below.
Thanks Zomig. Right here I go off to buy TT Maps....
Any significant differences in this version? Any Traffic updates?
zomig said:
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
Click to expand...
Click to collapse
Is QVGA version?
Just a quick query & probably a dumb one so apologies in advance. I have a 2 year old TomTom 1 V1 on which the screen has just died. Am I able in any way to use the maps on the SD card with with the linked to program on my HD2? Will probably just activate co pilot to be honest but wondered if this was possible as the software is leagal just old. Thanks up front for any help
fotone said:
Is QVGA version?
Click to expand...
Click to collapse
Is QVGA version?
zomig said:
New tomtom released which is supposed to support the HD2 including using tomtom home. Version is tt7.918.9193
Link Here
As you still need to buy the maps I have provided the link to the application as it is uselss without them.
Found this on my travels and seems to work ok.
Click to expand...
Click to collapse
Does it have the BT files removed?
Regards.
maybe it's better to mirror it outside rapidshare (it sucks)
I was using v7.916 and I just installed this one.
Really no difference at all. Its exactly the same.
Maybe there is an option I cant see?
You only have to replace the files in your tom tom directory. No further activation is needed.
biofotis said:
I was using v7.916 and I just installed this one. Really no difference at all. Its exactly the same.
Click to expand...
Click to collapse
thank you, so I still use v.7.916 (9189)
biofotis said:
Maybe there is an option I cant see?
Click to expand...
Click to collapse
maybe the only difference is:
zoomig said:
...including using tomtom home
Click to expand...
Click to collapse
Looking Glass said:
Does it have the BT files removed?
Regards.
Click to expand...
Click to collapse
It's 2 files you need to replace, so you begin with installing a version containing the BT files.
it's always the same with these releases, they usually just fix issues with not working with certain devices. Also i believe this is a wvga version although I am sure someone will correct me if I am wrong.
Just a quick query & probably a dumb one so apologies in advance. I have a 2 year old TomTom 1 V1 on which the screen has just died. Am I able in any way to use the maps on the SD card with with the linked to program on my HD2? Will probably just activate co pilot to be honest but wondered if this was possible as the software is leagal just old. Thanks up front for any help
Click to expand...
Click to collapse
You will need to get the maps reactivated through Tomtom as these will be tied to your v1 device. Also they may not work due to differences with PNA and PDA Type maps. Check with tomtom if in doubt.
I really hate rapidshare. It never works.
If you can, can you please post the file somewhere else.
Regards
tamAyT said:
It's 2 files you need to replace, so you begin with installing a version containing the BT files.
Click to expand...
Click to collapse
Nope! In the HD2 if you install T*T* "as is" you'll screw-up your BT functions, plus endless BT error messages, etc., it's all over the GPS forums.
In other releases people removed the BT files from the .cab, so your worries are over (as far as interference among different BT stacks)
I wouldn't dare to start all over again if the BT files are NOT removed from this cab.
Can anyone confirm?
Regards.
Nope! In the HD2 if you install T*T* "as is" you'll screw-up your BT functions, plus endless BT error messages, etc., it's all over the GPS forums.
In other releases people removed the BT files from the .cab, so your worries are over (as far as interference among different BT stacks)
I wouldn't dare to start all over again if the BT files are NOT removed from this cab.
Can anyone confirm?
Regards.
Click to expand...
Click to collapse
If you downloaded the file you will see that it is just 2 files which just need to be copied over to your device. There is NO bt files in this rar file.
If you want the cab install I will post it when I get it.
I tried it and doesnt work woth TT Home...
zomig said:
You will need to get the maps reactivated through Tomtom as these will be tied to your v1 device. Also they may not work due to differences with PNA and PDA Type maps. Check with tomtom if in doubt.
Click to expand...
Click to collapse
I shall indeed do that. Thanks for taking the time to read & answer my query, appreciate it.
I tried it and doesnt work woth TT Home...
Click to expand...
Click to collapse
Take out the memory card from the phone and put into card reader in pc. this works with tomtom home.
I shall indeed do that. Thanks for taking the time to read & answer my query, appreciate it.
Click to expand...
Click to collapse
best of luck though as tomtom support are known for being less than helpful.
I have version 3.0.1.6 installed in my ROM. I would like to know if I was to update it to the latest version 4.1.0 do I install it in my Device Memory to override the old version. If this doesnt override the old version and I end up with 2 versions then would I be better off installing it on my Storage Device?
You should be able to upgrade your cooked version but I'm not 100% sure. See if you get upgrade warning.
Always install GPS apps to device.
Bruce Inman said:
You should be able to upgrade your cooked version but I'm not 100% sure. See if you get upgrade warning.
Always install GPS apps to device.
Click to expand...
Click to collapse
I have TomTom Navigator installed on my Storage Device and never had a problem with it running there.
plapic said:
I have TomTom Navigator installed on my Storage Device and never had a problem with it running there.
Click to expand...
Click to collapse
If it's like iGo, it installs resources to SD but it still puts Program Files\IiGo\iGo.exe.
I'm not saying its impossible, just not a good idea.
For me voice search doesn't work as it just opens the dialer.
You would think they'd put a softkey on it instead of a hardware key....
Anybody got it to work yet?
Works for me!
Voive search works for me, Bruce. i press the talk button and just speak. Working just fine.
codhunter said:
Voive search works for me, Bruce. i press the talk button and just speak. Working just fine.
Click to expand...
Click to collapse
Hmmm interesting, it just opens my dialer.
Perhaps Keyboard controller is interfering.
Thanks for the heads up!