Help :( amons_ra 1.7.0 - Android Software/Hacking General [Developers Only]

Hi i have just tried to flash amons new 1.7.0 recovery image from terminal amd got, read error at 0×0000000 out of memory. so then i exited terminal then tried to reboot into recovery with no success it just hanged on the g1 logo? but im able to reboot my phone normally? please can anybody help me
Sent from my HTC Dream using Tapatalk

if you can reboot your phone normally try doing it in the terminal emulator.
Code:
Copy recovery-RA-dream-v1.7.0.img to the root of your sdcard
start the terminal app
#flash_image recovery /sdcard/recovery-RA-dream-v1.7.0.img
Make sure you are root when you run this command.
But don't do this if your running Cyanogen 5.0.7. If your running Cyanogen you'll have to do the fasboot method.
Code:
Copy recovery-RA-dream-v1.7.0.img to a location where fastboot can find it.
Boot your G1 into fastboot mode (boot while holding BACK)
Connect your G1 via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-dream-v1.7.0.img
This is the same code for all versions on RA. Just change RA-dream-v1.7.0.img, to whatever image file you have for your specific phone.

thanks for the quick reply ill try it when i get home thanks again!
Sent from my HTC Dream using Tapatalk

thanks for ur help i have done it through droid installer, mods close this thread please
Sent from my HTC Dream using Tapatalk

kylepotts said:
Code:
Copy recovery-RA-dream-v1.7.0.img to a location where fastboot can find it.
Boot your G1 into fastboot mode (boot while holding BACK)
Connect your G1 via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-dream-v1.7.0.img
This is the same code for all versions on RA. Just change RA-dream-v1.7.0.img, to whatever image file you have for your specific phone.
Click to expand...
Click to collapse
I have recently changed the SPL to version 1.33.2010 as well as the RECOVERY to RA-sapphire.v1.7.0 in my Magic following the procedure above but, although the flash command seems to finish properly and I can reboot into the new recovery just after the update, when I boot completely the phone (load Android) and reboot into recovery again, something changes the recovery version back to the original one (Android 2e), while the SPL is correct.
Do you have any idea of what may be happening?
This is the original config I had:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.2004 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
And this is the current one:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Jun 2 2009, 17:27:03
Thank you.

Related

32A Wont go past boot screen

so this is a new magic, from the operator 3 (Sweden):
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
I tried to root it by following the 32A guide from http://theunlockr.com/2009/07/08/how-to-root-your-htc-magic/ - Everything seemed to go alright, but now I can not get passed the "HTC Magic" loading screen.. any ideas? :s
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
Wish I had seen this first. I did the exact same thing. I also need help……
Seems like it wont save the image at all, after reboot the memory seems wiped with nothing to load.
did you wipe before flashing new rom?
Easy instructions is to:
1. fastboot into Amon_RAs 1.2.0 recovery. http://forum.xda-developers.com/showthread.php?t=530492
Code:
fastboot boot recovery-RAv1.2.0H.img
2. Nandroid backup (although i suspect it might be a bit late for that now for you)
3. Wipe data/factory reset
4. Apply sd card: choose zip
5. select the rom you want to load onto your phone
6. reboot once finished and enjoy root.
I didn't wipe the first time (it didnt say in the guide that I had to), but all the other times I dod wipe the memory. I followed your instructions now, booted from Amon_RAs 1.2.0 recovery, wiped, installed, still no go.. any ideas?
Try to change your SPL.
http://forum.xda-developers.com/showthread.php?t=529019
Go for the "Engineering" one..
Double check if you are installing the correct ROM for your phone. A ROM for 32A in your case. I got the same problem and it came out that I was installing a ROM for 32B while my phone is 32A.
GOOD NEWS!
Got it sorted out!
Some good news for you too, mererid!
1. 1. fastboot into Amon_RAs 1.2.0 recovery. http://forum.xda-developers.com/showthread.php?t=530492 (as stated above from MontAlbert)
2. type in CMD:
adb shell
mount /sdcard
exit
3. Push up your ROM of choise (I used Amon_RAs Hybrid Rom http://forum.xda-developers.com/showthread.php?t=538645 ) using command: adb push update.zip /sdcard/update.zip
4. Wipe memory/reset factory defaults
5. flash update.zip
6. Boot and enjoy!
edit: It was command number 2 (mounting before pushing) that screwed with me...
Step #2 is not needed - you just need to be patient
The recovery rom presents the boot menu before a lot of the system has finished loading. In particular the sdcard isn't mounted at that point.
If you get errors trying to mount mbmblk then wait 10 seconds and try it again.
I've had the same problem.
The experts said that my device need another kernel. I've tried several ROMs but with flashing dalroid image I was successful.
I have instructions how to patch any ROM with my kernel - http://forum.xda-developers.com/showpost.php?p=4038589&postcount=8. But I haven't tried it yet.

[HELP] Product PID 0FFF?

Hi all,
I was trying to do flash to new rom today. However, I encounter a strange problem.
I had installed chinese ime through update.zip by jashsu from this thread
http://forum.xda-developers.com/showthread.php?t=512530
My previous way of getting the update.zip into the system is simply fastboot the device and run update.zip (I did not root the device).
However, tonight, I can't get ADB connected. So I went to check the ADB devices, it shows device pid as 0fff instead of 0c02 or 0c03, and driver is properly installed as "HTC Bootloader".
Can anyone tell me what is wrong? I've searched through the forum, apparently not many ppl had the problem, and I haven't seem any solution yet.
My device as follows:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
------------------------------------------------------------------
UPDATE
I try to run fastboot devices, it does detect my phone, so I decide to fastboot my phone with recovery img by Amon_RA from here:
http://forum.xda-developers.com/showthread.php?t=530492
So, It worked, I quickly did Nandroid backup.
While I boot into the recovery rom, computer pops out new devices found, and it's the HTC Dream Composite ADB Device! and now PID is 0C02.
I run ADB devices and it shows:
C:\androidsdk\tools>adb devices
List of devices attached
HT96YKF0XXXX recovery
ok, obvously it means it's under recovery mode.
I reboot my phone again, boot into fastboot mode to see if ADB works properly,
apparently, NO, HTC Dream Composite ADB Device disappears and replaced by HTC bootloader and PID is now back to 0FFF again.
It seems I can properly still flash my rom with update.zip, but is it safe? or I might just brick my phone?
Anyone got any idea about this?

Phone will not boot to OS + no recovery mode.

Phone Info:
Sapphire PVT 32b SHIP s-on G
HBOOT-1.33.0006 (sapp30000)
cpld-10
radio-2.22.23.02
May 27 2009,19:06:41
History:
So I deleted at least one to0 many applications and now the phone will not boot to the OS. It freezes then restarts during the boot process.
I cannot get into the recovery mode with home+power. It just sits with the green myTouch logo until I give up holding it and it then tries to boot.
I can press back+home and get to the FASTBOOT screen.
Help:
Where exactly do I go from here? I cannot find my gold card and have no way of making one right now.
Thanks!
Anyone have any thoughts or know what files I need to work with fastboot?
Hello
Install first HTC Sync for Drivers (here). (if nothing works, go to pc -> device manager -> right click unknown device and uninstall. than install again.
After this try start your device with hold back+power button.
Go to cmd and write
1. cd C:\androidsdk\tools
2. fastboot devices
if you see your fastboot device than you can remote boot a recovery file. Get recovery here.
3. fastboot boot recovery.img
than restore your nandroid backup or install your rom.
i had exact same problem 1 hour ago and i solved it with this
hope it helps.

[Q] Mytouch 3g Brick

hey, Im really stuck with this and im at my witts end and could really use some help. After numerous attempts at running cyanogen 6 on my phone it failed. Im not going to run through the entire process just to where Im at now. The phone boots into both fastboot and recovery, but the recovery is a rom that I had downloaded previously because I had no recovery (•recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea) is the rom that i downloaded. I am unable to successfuly flash any rom over and I cant load SAPPIMG.nbh from fastboot. also in fastboot my led light turns blue im only including this info because I read someone mention it in a forum. So can I get some help please
DeadlyArr0w said:
hey, Im really stuck with this and im at my witts end and could really use some help. After numerous attempts at running cyanogen 6 on my phone it failed. Im not going to run through the entire process just to where Im at now. The phone boots into both fastboot and recovery, but the recovery is a rom that I had downloaded previously because I had no recovery (•recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea) is the rom that i downloaded. I am unable to successfuly flash any rom over and I cant load SAPPIMG.nbh from fastboot. also in fastboot my led light turns blue im only including this info because I read someone mention it in a forum. So can I get some help please
Click to expand...
Click to collapse
What is your hboot and radio? if you can still boot into fastboot, then you can use fastboot to flash a recovery. Did you interrupt any process or flash a rado or spl/hboot?
UberMario said:
What is your hboot and radio? if you can still boot into fastboot, then you can use fastboot to flash a recovery. Did you interrupt any process or flash a rado or spl/hboot?
Click to expand...
Click to collapse
Hboot-1.33.006 (sapp30000)
CPLD-10
Radio-2.22.19.26i
DeadlyArr0w said:
Hboot-1.33.006 (sapp30000)
CPLD-10
Radio-2.22.19.26i
Click to expand...
Click to collapse
Just install the Android SDK (search XDA)
and do this in command prompt (Windows Instructions)
cd C:\< the android sdk folder name>\tools\
then follow the fastboot instructions

Htc desire s stuck at Htc logo , even cannot make factory reset

Hi experts
One of my friend brought his Htc stuck at Htc logo even I cannot make factory reset in boot mode.. When I click factory reset nothing happens.. Don't know where to start? Can somebody tech me
I made gold card successfully
Thank you
Give some more info please
1) what is written on the top part of the screen when in boot mode
it should look similar to this:
Code:
---AlphaRev---
SAGA pvt ship S-off RL
HBOOT-6.98.1002
RADIO-3805.04.02.01_M
eMMC-boot
2) can you access RECOVERY from the boot mode menu
if yes make a picture of it and attach it here
Also see here, there are some ways to restore from white screen issue.
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO - 3805.06.02.03_M
eMMC - boot
and if i press recovery showing recovery symbol and phone get off and vibrating 3 times
And i downloaded this file
RUU_Saga_hTC_Asia_WWE_1.48.707.1_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199476_signed.exe
when i try to update ..its stuck at rebooting to bootloader
I have a similar problem. But mine is s-off and unrooted, it occurred when I tried updating with the system OTA update (about 230mb in size). It updated, showed the circular green stuff on the black screen, booted a few times then just stuck at the HTC screen on the white background.
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO- 3822.10.08.04_M
eMMC-boot
Mar 10 2011, 14:58:38
Please would appreciate your help
sharaz191 said:
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO - 3805.06.02.03_M
eMMC - boot
and if i press recovery showing recovery symbol and phone get off and vibrating 3 times
And i downloaded this file
RUU_Saga_hTC_Asia_WWE_1.48.707.1_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199476_signed.exe
when i try to update ..its stuck at rebooting to bootloader
Click to expand...
Click to collapse
It seems that your problem is complicated. Stock software and no recovery access makes it difficult to give an appropriate advice. Maybe something wrong was flashed on this phone or the worst case - "fried" eMMC chip. You can try to search across the forum for any similar or try various solutions but I cannot advice how to proceed. Sorry
linkin8k said:
I have a similar problem. But mine is s-off and unrooted, it occurred when I tried updating with the system OTA update (about 230mb in size). It updated, showed the circular green stuff on the black screen, booted a few times then just stuck at the HTC screen on the white background.
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO- 3822.10.08.04_M
eMMC-boot
Mar 10 2011, 14:58:38
Please would appreciate your help
Click to expand...
Click to collapse
There are at least 10 other threads from the past 2 weeks with exactly the same problem. Do some reading, the solution is simple...
Please just tell me what to do or give me the thread cause I have searched and can't find precisely what will help. Just post something please I beg you.
here you go
Sent from my HTC Desire S using Tapatalk
Can I solve by jtag?
sharaz191 said:
Can I solve by jtag?
Click to expand...
Click to collapse
Surely simpler to return under warranty?
Swyped from my Desire S using XDA Premium
Tried everything in the thread and it won't still work.
I downloaded RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed and used it. It showed successful but got stuck at the htc logo white screen again. When i tried using the ruu again it showed the old version which it supposedly upgraded was still in the phone.
Please help am so frustrated
linkin8k said:
I downloaded RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed and used it. It showed successful but got stuck at the htc logo white screen again. When i tried using the ruu again it showed the old version which it supposedly upgraded was still in the phone.
Please help am so frustrated
Click to expand...
Click to collapse
Hint - flash hboot 0.98.2000
After use the latest RUU 2.10.401.8
Sent from my HTC Desire S using Tapatalk
Thanks for the quick reply. I have already tried flashing hboot_0.98.0000_361a7ba6_0310 onto it using android flasher in "fastboot usb plug" but it reboots and gets stuck at the htc logo again until i remove the battery.
Also here is what androidflasher shows me :
sending "hboot" (1024kb)...
OKAY [0.191s]
writing "hboot"...
(bootloader) image update is bypassed!
OKAY [0.030s]
finished.total time:0.221s
rebooting into bootloader...
OKAY [0.248s]
finished.total time:0.248s
rebooting....
finished. total time: 0.244s
**update**
was able to flash 4ext recovery using android flasher onto my device and tried updating with the ruu again. It still gets stuck at the htc logo white background (so i painfully remove battery again) but when i try running the ruu again from my pc it shows that i have the same version as the ruu.
Still stuck at white screen. Help!!!
linkin8k said:
**update**
was able to flash 4ext recovery using android flasher onto my device and tried updating with the ruu again. It still gets stuck at the htc logo white background (so i painfully remove battery again) but when i try running the ruu again from my pc it shows that i have the same version as the ruu.
Still stuck at white screen. Help!!!
Click to expand...
Click to collapse
see the version of the bootloader
if it is still 6.98.xxxx this is you problem. Flash 0.98.2000 with PG88IMG.zip from the SDcard or try 2.00.2002 - you can find this in the forums also
linkin8k
I have the same problem and I have not found the solution up here.
can anybody tell me can i solve this by JAG?i can do jtag my self
thanks for the replies sorry i couldn't post yesterday was trying to be in a festive mood.
**my progress**
I have tried all i can to update the bootloader, from putting the pg88img file in through root of sd to update through 4ext recovery to tryin to use android flasher to put the 0.98.2000 it won't just update.
please what else can i do?? is there a hboot installer for windows for me to try??
please help AmidaBuddha u have done a lot but i still need a little help. thanks
As much as i know would be the last possible solution to replace the bootloader with dd command inside adb shell or try to flash it with fastboot (to make this the htc drivers [if you are using windows] and the android sdk with the given android plattform-tools must be installed, if some parts are not present look at the index thread)
Walkthrough:
fastboot:
reboot your device to bootloader and put it in fastboot mode
open commanline at your pc
attach device to pc
cd to the directory where the hboot.img is ( extract it from the pg88img.zip file)
Code:
fastboot devices
(your device should show up as some letters and digits at the right of it should stand recovery, also the adb daemon is started if it wasn't running before)
fastboot flash hboot hboot.img
this replaces your current hboot with the hboot.img file, don't interrupt the process or pull the usb cable, this can brick your device, i'm not responsible if something goes wrong.
dd:
put the needed .img file of the bootloader at the root of your sd (extract it from the pg88img.zip file) and rename it to hboot.img
reboot to recovery
Open commandline at your pc
attach device to pc
Code:
adb devices
(your device should show up as some letters and digits at the right of it should stand recovery, also the adb daemon is started if it wasn't running before)
adb shell
(this opens the adb command shell, from where you can execute shell commands right at your device)
dd if=/dev/block/mmcblk0p18 of=/sdcard/backup.img
(this backups your current bootloader partition to the backup.img file)
dd if=/sdcard/hboot.img of=/dev/block/mmcblk0p18
(this replaces your bootloader partition with the boot.img)
exit
(exits adb shell)
adb reboot bootloader
(reboots your device to bootloader)
this backups your current bootloader to /sdcard/backup.img and replaces it with the boot.img, but beware this is hard stuff and be carefull, don't stop the execution of the any dd command and never pull the usb-cable while it writes your bootloader, this definitly can brick your device, i'm not responsible if something goes wrong, good luck.
Tectas thanks, see what i get using fastboot:
on command line:
c:\users>fastboot devices
SH14HTJ05*** fastboot
c:users> cd c:\temp
c:\temp>fastboot flash hboot hboot.img
sending `hboot` <1024 kb>... OKAY
writing `hboot`... INFOimage update is bypassed!
OKAY
on phone under bootloader menu:
Can not roll back hboot version
........
will try dd option now.

Categories

Resources