anione tried ani GPS working on s200?
^i hv garmin mobile xt on my s200. works just fine.
icegal said:
anione tried ani GPS working on s200?
Click to expand...
Click to collapse
igo8 and automapa works fine here._a
slash_5150 said:
^i hv garmin mobile xt on my s200. works just fine.
Click to expand...
Click to collapse
wad version? i did a search on garmin before n realised it has many many versions
as_x1 said:
igo8 and automapa works fine here._a
Click to expand...
Click to collapse
igo8 n automapa has maps of spore?
icegal said:
wad version? i did a search on garmin before n realised it has many many versions
Click to expand...
Click to collapse
mine is version 5.0020wp
me i use tomtom it fine and realy fast...
How did you get internal gps working with them.
I am trying both and neither of them see the internal gps of my s200.
How is the gps configuration of both program and s200?
Thanks for the help.
navigations
sygic mobile maps 2010 and igo8 works super
Hello
For me, with tomtom, it's :
- other nmea, 4800 bauds and com7
jm78
iGo 8 works fine.
I am using IGO 8 ,works just fine
I am using VIETMAP R.12 in Vietnam, quite good. Sometimes, I run "Satellite Data Update", so my phone fixed GPS signal very fast. About 15 seconds when turn program on.
TomTom 7
I use TomTom 7.9... WVGA
- Com 7
- Baudrate 38400
It works fine.
I have a Garmin mobile Xt version 5.00.20wp work fine
iGO 8.3.2.97313 work fine
iGO PRIMO 8.5.9.142948 work fine
Settings 57600 bauds and port7
I experienced the problem "out of memory" with igo8 on my s200. Someone can explain me how to configure sys.txt. Thanks
With TT7, I have setting com 7, 115200 bauds. It's work good.
With IGO 8, I have setting com 7, 57600 bauds. It's work good.
With Navigon mobile navigator 7, I have setting com 7, 57600 bauds. It's work good.
Igo 8 and igo primo working great
IGO 8 works fine. in order to enable the internal GPS just go to ->IGO settings->GPS and perform "Auto Search" (button in the rigt corner). after a few seconds it should have found your GPS.
Regarding sys.txt problem: open the file with an editor and delete the content (NOT the file itself!). At next start of IGO the software will create new clean sys.txt.
Regards
Stephan
Related
I installed Faria WM6 , I have an Bluetooth GPS iBlue (BT-GPS-Q800) - chipset NEMERIX 16 canale that worked perfectly with WM5.
Now I am able to conect with the bluetooth at the GPS but IGO dos not recognise my GPS ..?!!?
Should I do something special in WM6 ?
EmilianM said:
I installed Faria WM6 , I have an Bluetooth GPS iBlue (BT-GPS-Q800) - chipset NEMERIX 16 canale that worked perfectly with WM5.
Now I am able to conect with the bluetooth at the GPS but IGO dos not recognise my GPS ..?!!?
Should I do something special in WM6 ?
Click to expand...
Click to collapse
Are you sure that you have the correct port address in the igo? I sometime have to set it myself in tomtom if its having a off day, but only happens 1 in 1,000,000 times
IGO has an option to search all ports ...and it can not find anything...
I think that is a problem with the GPS settings from Settings->Connection->GPS from WM6...
EmilianM said:
IGO has an option to search all ports ...and it can not find anything...
I think that is a problem with the GPS settings from Settings->Connection->GPS from WM6...
Click to expand...
Click to collapse
Igo won't find your GPS, just go to GPS Settings in IGO, choose the port which you set for your GPS, outgoing port. Set the speed to 57600, turn your GPS receiver off and on, now it will connect....
Don't forget to turn on Bluetooth, Igo won't do this like TT does.
Vilem said:
Igo won't find your GPS, just go to GPS Settings in IGO, choose the port which you set for your GPS, outgoing port. Set the speed to 57600, turn your GPS receiver off and on, now it will connect....
Don't forget to turn on Bluetooth, Igo won't do this like TT does.
Click to expand...
Click to collapse
Don't mess with GPS settings in WM6 and/or 5.
I have a HUGE problem with getting my GPS running on my Orbit2. It came from O2 with CoPilot7 preinstalled with the maps of UK and Ireland, which I dont use, because I am not located inthere, nevertheless Copilot detects GPS signal and shows positioning, but i dint have the maps for the area that i am in.
I tried to install IGO6 and then IGO8 but I have the same problem-- it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
How come CoPilot detects, and IGO does not? I read that Orbit2 is not locked?!?
Should I boot the whole device using some other ROM.
Don't use warez only original software ...
Then you will have no problems.
IGO 8 is not for sale!!!!
Orbit2-- GPS cannot be detected with IGO PLS HELP?!?!?
I have a HUGE problem with getting my GPS running on my Orbit2. It came from O2 with CoPilot7 preinstalled with the maps of UK and Ireland, which I dont use, because I am not located inthere, nevertheless Copilot detects GPS signal and shows positioning, but i dint have the maps for the area that i am in.
I tried to install IGO6 and then IGO8 but I have the same problem-- it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
How come CoPilot detects, and IGO does not? I read that Orbit2 is not locked?!?
Should I boot the whole device using some other ROM.
Why are you doing multiple posts?
lubmarinov said:
Orbit2-- GPS cannot be detected with IGO PLS HELP?!?!?
it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
Click to expand...
Click to collapse
Have not had any GPS software that didn't work with correct settings yet.
though i haven't testet IGO. But why shouldn't it work also?
Correct settings for internal Orbit2 GPS device is: Com4, 4800 Baud.
Olioaglio
All recent versions of iGO work whith settings defined, and on aoutoconfig...
Have just got my TP on Vodafone UK, it does not have GPS enabled, is there any way I can enable it
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
NO GPS
freco said:
What do you mean? There is no GPS in Start -> Settings?
Anyway try this "must have" tool from schaps so you can manage a lot of settings, GPS included.
Click to expand...
Click to collapse
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Sounds to me like you've got the version of tomtom that doesn't have the option of choosing the internal GPS.
Download GPSTest to see whether the GPS is automatically detected.
can i suggest u try gps test n see what that does
also try it with google maps
i think this might be a handset fault tho cant see why it would be disabled as its a selling point
Im 99% sure that TT6 doesnt support internal GPS modules, had the same problem with my N95....or come to think of it was that TT5? Hmmmm im not so sure now lol...
TT6 worked fine on my MDAC3 with internal GPS.
Funnily enough, the Voda specs page makes no mention of GPS at all
ryraum said:
IF I load TomTom 6, it can not fin the internal GPS, I can connect to an external GPS via Bluetooth
Click to expand...
Click to collapse
have you tried Other NMEA GPS-reciever, baudrate 4800, COM4 already?
NO GPS
Your right vodafone does not show GPS
Have tried it with Google Maps and will try it with GPStest this evening.
Spoke to Vodafone are going to send another handset
have also tried Other NMEA GPS-reciever, baudrate 4800, COM4
I have a Vodafone handset and thought the same as you.
It does have a GPS and it does work with TOMTOM 6.
1. Go to programs and slect quickgps and download.
Then go into tomtom and under showgps satus select configure and choose other NMEA GPS, slect baud rate 57600 and then load a destination.
Make sure you are outside tho and it might take 25 mins to get your first ever fix.
Mine connects within seconds now.
Good luck and let me know if I can help you further.
Could someone post the link to the Tom Tom 6 or 7 cab file for the Touch Pro?
Thanks
Regards,
Neil
http://forum.xda-developers.com/showthread.php?t=427744
2 threads above this one
ALL Working Fine
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
EN4CER69 said:
What's working fine?..TOMTOM 7 maps with the 6.032 cab?..
I have a original copy of 6.032 and iuse traffic updates via tomtom..my concern is that i wont be able to use the traffic updates... can someone confirm plz? and where i can get the maps?
pm?
Click to expand...
Click to collapse
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
ardsar said:
The traffic subscription is registered to your account, therefore it will work on version 6 or version 7. However, your maps (6.75?) will not work with tomtom 7, but you can purchase new maps from tomtom home as the touch pro is now recognised by the tomtom home application (version 2.4 or above)
Click to expand...
Click to collapse
Thanks for that.... Do you know if there are any advantages with tt7 over tt6 other than newer maps?
and
when tt do official release tt7 will it inc a cab/install file?
many thanks again
ALL Working Fine
Test handset with GPStest, works fine.
Change GPS setting to com4 speed 9600, wait 2mins and got a signal.
TomTom 6.030 loaded and working
Thanks to all for your help and avice.
ryraum said:
Ran GPS test, shows GPS working.
Set GPS to com4 9600, took about 2 mins and found signals.
Works fine fine with TOMTom 6.030
Thanks for all the help.
Click to expand...
Click to collapse
I'm also facing a similar problem. Google Maps is unable to detect the internal gps receiver.
When I run, GPS Test, it just shows the GPS starting up message (with 2 yellow bars, sometimes only one). I have run quick gps and downloaded the satellite data twice already.
Can somebody please help me?
Hi @ all,
first of all a happy new year
I wonder if anyone has the Omnia B7330 running with TomTom 7 on it. I have the problem that TomTom doesn't find the internal GPS. I tried all possible settings with
"internal GPS"
" other NMEA GPS"
and all possible Baud rates and com Ports
but TomTom does not find the internal GPS.
In the meantime I wonder if perhaps the internal GPS might be damaged and I should send the device back??
On my HTC Snap (Maple) TomTom recognizes the internal GPS immediately.
I als tried to manage something concerning "Port Splitter", but most of these programs are not for WM without touchscreen....
Any ideas how to get this working?
Best Regards
Jolig
Hi, if you want to know if your device is working or not, try GPS Test 1.04. There is a cab file for it, "google is your friend" as they say. 8) If you run the program (it is good for non-touchscreens as well) and it can find a signal, then you have to fine tune your navigation software, if no signal, then you have a faulty device.
Happy New Year!
Welcome to forums
Hope this helps:
http://cellphoneforums.net/samsung/
Good luck,
Same Thing here...
...the Testapp recognizes the GPS on COM3 with 9600Baud and can work with it. The GPS Module seems to be working well, found my position after 10secs. TomTom however can't work with the GPS-Module... I'm on TomTom 7.910.
Any idea?
JC
Try this
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
------Tomtom Configuration-----
*GPS NMEA
*Baud rate 4800
*COM2
IMPORTANT
When you make all the steps you have to see in the Satellites top/right windows of the tomtom a little Yellow/Black ball rolling, that means the GPS is working. You only have to wait to your Omnia GPS find the signal.
-> You can download an XTRA GPS DATA to improve the finding speed of the GPS, personally I can not see the diference between NO XTRA DATA and XTRA DATA.
Settings\Hardware\Enchanced GPS
*Enable XTRA DATA CONNECTION
*Disable automatically download.
*Press download button
With that configuration in my omnia I don't have any problem with Tomtom.
The Testapp also recognizes the GPS on COM3 on my B7330.
But it dosen't work on TomTom 7.910.
Is there a way to change the GPS to use COM2 ?
tom tom
Hello!
Do this:
use another phone with touch screen, set the tom tom gps as an external port and the appropriate speed,
save your settings. fire up tomtom on omni pro b-7330.
Can you type the addresses correctly? I had a problem with another phone with qwerty by tomtom7.
Erroneous indication of gps in omni pro B-7330 / no fix
Erroneous indication of gps in omni pro B-7330 / no fix
I need help, my gps in the B-7330 incorrectly indicates the distance of some 400km,
Is it a bug?
after uploading the google maps, fix grabs for a few seconds, and incorrectly states the place automapa (another program to navigation) also indicates the wrong place but other than google maps, the difference of some 1000km.,
I used GPSTEST 1.04:
COM3: 9600kb.
Is it firmware bug, or damage is hard?
using the settings from the post in advance Com9: omnia has gps pro, but did not catch the fix - no signal satleitów.
So, are you sure the port Com9?
So I need help
You should try posting on the proper section for this non HTC device:
http://forum.xda-developers.com/filter.php?cat=Samsung
TomTom GPS Problem
chindley said:
-----Omnia Configuration-----
Settings\Hardware\External GPS
*GPS program port: COM2
*GPS hardware port: COM9
- Baud Rate: 9600
*Manage GPS automatically: YES
Click to expand...
Click to collapse
Hi,
where did you find the external gps setting at the omnia. Cannot find them. thanks for your help.
Samsung Omnia B7330 and Tomtom Navigator 7
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
thebiff said:
I am having the same trouble as the people above and cant get tomtom to see the internal gps - any help would be much appreciated.
Click to expand...
Click to collapse
TomTom is pants on the 7330.
I'm using Route 66 (v7) with UK and Europe maps. GPS can be interigated through the menu and cold fix is quicker than most I've used.
No GPS lag, and other than the soft button icons sitting above the call and call end buttons (can cause confusion), I would recommend going down this route instread (no pun intended)
Also strangely, the 'browse map' facility is managed through the 'zoom to' function.
Alan.