oh no, oh no, what have i done??
I've created a little problem for myself. While at work I performed a wipe/restore on my phone. I have modified rc30 jf 1.3 and when my phone is booting up now I get stuck at the android screen. The green light near the ear piece comes on and a ringing can be heard from the speaker. I have tried to wipe again to no avail. Has anyone heard of this happening? Is it because I have a theme file on my sd card named update.zip? I know I can't be the only one to brick their phone!
blehman said:
I've created a little problem for myself. While at work I performed a wipe/restore on my phone. I have modified rc30 jf 1.3 and when my phone is booting up now I get stuck at the android screen. The green light near the ear piece comes on and a ringing can be heard from the speaker. I have tried to wipe again to no avail. Has anyone heard of this happening? Is it because I have a theme file on my sd card named update.zip? I know I can't be the only one to brick their phone!
Click to expand...
Click to collapse
Try reflashing JF 1.3. Did u create a backup?
I did not backup. I will reflash when I get home.
blehman said:
I did not backup. I will reflash when I get home.
Click to expand...
Click to collapse
That should work. I had the same problem.
thanks, i need to hear that.
how would i go about using hard spl to bring it back from the dead?
Foolproof solution would be to use RC29 DREAIMG.NBH. More intricate solution is to fastboot flash your nand backups (provided you had the foresight to make backups in the first place).
What jashsu said. I nearly bricked my phone once but reflashing with RC29 was the quick and easy way of saving it.
i need help think that i am bricked
I was on 1.1 ADP JF with the mac 2.2 theme for 1.1 ADP i wanted to get back to the original theme so first i installed the restore theme thing on the fourms after this i have been stuck at the android screen when booting. i have tried to the wipe alt W but right now i am downloading the image file to get back to the original rc 30... can anyone help me out??? i really need to my phone tommorow and help would be much appreciated thank you
Assuming that you have the JF recovery utility, you should be able to copy the update.zip for RC30 to the sdcard (take the sd card out of the phone and copy update.zip to it), and apply the update from the JF recovery utility. You can get into the recovery utility by holding home+power when booting the G1. I hope this helps.
assuming if the above post don't get you up and running you will want to donwload the stock rc29 dreamimg file and copy that manually to your memory card and with the phone off. Hold down the camera button while turning on and you will get a grey screen the and should let you flash back to the original rc29 if you can't to an alt w whipe this would be the next thing I would recomend.
Just to clarify you said your phone is the adp - android developer phone, a phone that allows you to restore the phone to earlier states?
If this is the case you just need to grab a recovery image and reflash your phone by depressing camera on boot or using fastboot to restore your phone to an earlier backed up configuration.
If you don't have the developer phone, and infact have a rooted handset with a custom firmware such as JF your best bet would be as above to roll back to rc29 or rc07 if you're uk based using RC29 DREAMING.nbh -steps can be found here http://android-dls.com/wiki/index.php?title=Root_For_RC30
The downside is this will require you to reroot your phone. May i suggest in future if you do NOT have a developed phone you install Nandroid and do regular backups before playing with your phone -details here http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Let us know hopw you get on and if we can offer any further assistance.
ok thanks guys
i installed rc 30's official image to my g1 by power+camera and everything is fine besides being unrooted i think i will root back to ADP again because of its advantages but if i am the flash a theme once again how do i get back to original theme because im sorry but i still dont understand the steps needed to do this from a ADP 1.1 jf build ty
You should have tried updating back to the 1.1 ADP JF version you were on first, would have saved you alot of time.
Hey! I assume for the purposes of this post and on accout of your having dev phon firmware you know how to use fast boot. if not go to http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Anyway if you restart your phone with the home button depressed alt b makes a back up, use fastboot to flash this to your phone and restore it to an earlier state!!!!
Can the G1 officially be bricked?
I know you can screw up and update or 2...but with the PWR + Camera thing and the Home + PWR update method...is there a way to officially brick the G1? or is it relatively brick-proof?
I wouldn't think any phone is brick-proof. Then again, the G1 does seem more "mod" friendly than others.
Flash a corrupt SPL and you will have a brick really fast
AbsoluteDesignz said:
I know you can screw up and update or 2...but with the PWR + Camera thing and the Home + PWR update method...is there a way to officially brick the G1? or is it relatively brick-proof?
Click to expand...
Click to collapse
Try it really quick and please post your results lol
I might be wrong, but I think as long as we don't mess with the boot loader, it should always be able to start with camera-power
ok i have my mem card with my cyan's update, compatible themes and so on... however when i was showing a friend what i did he clicked nandroid backup on my phone so it replaced my original rom.
i wanted to go through regular rooting method just for the heck of it cuz i have some extra mem cards to play with and figured i can just run nandroid backup to have the cyan and one touch method phone from one memory card, then wipe and use my other roms with whatever else on on the other memory cards to switch to anything at anytime and have access to the stuff i dont have being stuck with cyan and the 1 touch method.
My problem--- on step 3 when im using sappimg.zip to flash it says Model ID incorrect! Update Fail!
i followed the instructions to a T but im thinking this may have to do with the fact that my mt3g is already rooted.... should i go back and make the goldcard again or is my problem as i suspect.... and is their a resolution????
Thanks for your help.
your gold card isnt working if it says model id incorrect. that is the precise purpose of the gold card.
if you already flashed a rooted rom you dont need to use the gold card method.
you just need to use the flash recovery program to get your modded recovery image, and from there instead of updating a rom, you need to update the SPL to one of the engineering ones found on Amon_ra's thread called Magic HBoot
good luck
Wow, thanks for the quick response. That makes perfect sense I guess I was just worrying myself. Thanks again
One-click FTW!
The one-click method is far superior and more efficient. I've used that even still for 3 of my Android devices. Otherwise, my original G1 was rooted via "old school" tactics. Downgrade, UPGRADE, downgrade, etc.
Universal Androot confirmed working. This method is no longer needed and is to dangourous for some people so please use universal androot 1.5.3+
IF READ CORRECTLY YOU WILL NOT BRICK. BUT, Since a few of you dont have that ability, I AM NOT RESPONSIBLE FOR YOU BRICKING YOUR PHONE. There are no pros to rooting this phone yet, leave it alone if you dont know what your doing PLEASE. I beg you. You are in essence almost bricking your phone in order to root it in the first place. These arent fun and games, It is dangerous to rush this stuff
Listen.. Im more then happy to help people. BUt I fully understand why so many devs have left this place. Some of you are so utterly ridiculous with your questions, wanting someone to hold your hand. I cant sit on gtalk for hours helping you go through what should take 10 min , I have a life and kids and other things to do. I did this because I was bored and wanted to see if I could. There is not point in rooting it yet, there are no roms, nor will there be for at least a month. Please, if you cant even understand simple questions, have never rooted or even used an android phone before, please.. do not bother me. This place is insane with stupidity. I will change the tutorial in a little more detail later, but fo rnow, DO NOT DO THIS IF YOU DONT KNOW WHAT YORU DOING. IF YOUR BREAK YOUR CRAP< I DONT CARE, BECAUSE IT WASNT MY FAULT.
I am in no way an angry or mean person, but you people have given me a migraine. I see why all the rom devs hide from here so much
THERE IS NO POINT IN ROOTING THIS PHONE YET PEOPLE, SO STOP.. OMG PLEASE STOP LOL
IT HAS BEEN DONE!!! lol
After 3 days, sleepless night and 5 min from returning the phone, Together with the Awesome Cursordroid We have achieved full root of the fender mytouch/ Mytouch 1.2 revision.
Now.. Understand.. not many will have the fender Mytouch.. but this is the hardware they WILL be using in the fully confirmed Mytouch 1.2
If you do not follow my instructions fully, NOTHING WILL WORK.
Start by making a working gold card, pay VERY CLOSE attention to what the instructions for making a gold card say
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
READ READ READ. DO NOT download the SAPPimg.zip file it says on that page.
Get the top fixed SPL file 2010 from here
http://forum.xda-developers.com/showpost.php?p=4332591&postcount=1
Once you have you working goldcard (remember, apply to PHYSICAL not LOGICAL) rename the fixed SPL/rom you just downloaded to SAPPIMG.img
Put that file on your gold card
Hold volume down while hitting power
You will boot into Hboot, and if goldcard was made correcly and file is in root, it will begin to read. MAke sure battery is full or chargeing. follow on screen directions for flashing. Reboot into Hboot.
You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY.
Now grab the stock radio and SPL from Cursordroid here http://forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
From there on follow hiw directions for reupdating your radio and spl, plus give yourself a new recovery making ROOT.
Im not good at tutorials or typing on a tiny netbook keyboard so please forgive. Anyquestions please ask and I will go into more detail
In order
Goldcard
Amen ras fixed spl rom renamed SAPPIMG.img
Boot into Hboot volume down/power
let rom install saying yes to what it says. If it works..
Now boot into your recovery through fastboot
Flash phone with stock fender rom
reboot into fastboot
back out of update when it asks and flash STOCK radio and SPL back, now reboot
your splash screen for fender IS GONE, get over it. You can make a new one later if you realllly need to.
if you build the thread they will come, oh yes, they will come.
thebluecoat said:
if you build the thread they will come, oh yes, they will come.
Click to expand...
Click to collapse
lol.. I figured if I could get a thread up with all our info, maybe I could get more people interested just for the fact hat nothing now works... which means this could be the same build in the coming Mytouch 1.2 that is basicly the same exact phone as the fender.
hey, im new here but i have a rooted g1. and i've been skimming thru the fender pages.
I also work at tmobile and used my discount to snag the fender. but as of now im still using my rooted g1 which currently has a tiny scratch on it which i cant stand "hence why i got a fender".
seems to me once the new mytouches come out with the 32a and 3.5 mm jack there will be more attempting to pwn his phone.
im still fairly new to all of this soo im tryin to soak up as much knowledge as i can.
but still w/o the root. the fender still is a sweet phone haha.
idk what to do with it, it just sits in my room i havent even put my sim into it yet. im deciding either to sell it or just let it sit until it can be rooted.
i use the wireless tether too much to switch to the mytouch.
in the mean time g'luck! kinda rough for us LE owners cuz only few people have it to play around with.
This might be noob as I am not 100% sure what perfected SPL means, but I had a SPL that gave the fastboot "no remote" error.
I used an official SEA RUU that comes with a ENG SPL, then I could update change what ever I wanted.
Thought I would just through it out there.
My phone is a model A6161.
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!
crypysmoker said:
The problem is after days of reading and trying 5 different sapp.img every file gets the same device id failure. But I do understand having to find a higher number rom so Ill start on that quest.
So basicly what you saying is I need to find a pre rooted "offcial" rom that has and eng SPL allready or a 1.5 rom with open spl?
Ill try the 1.5 cupcake idea because the goldcard methos so far doesnt seem to work but that would make sense if we are trying to use to old a versions to root.
Looks like I have a new project for the day lol
Click to expand...
Click to collapse
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.
5[Strogino] said:
I think, your current way will not end with success.
Wrong model id or device id means, that HTC decided pick out Fender in another serie. Yes, i agree, that Fender has same SPL as Magics, but trying flash anything, that has another model id like trying flash Hero's ROM to Tattoo.
SPL ia like a computer's BIOS. SO if you flash foreign bios - your comp will probably die....
Saddened by the fact that Fender is limited edition. So it will not have big knowledgebase like Magic.
Click to expand...
Click to collapse
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.
chrys9989 said:
While the Fender is le, the mt3g 1.2 is the same hardware, so hopefully someone will get it figured out.
Click to expand...
Click to collapse
Oh. Chances growing up.
I'm new here, but typically how do people go about getting the attention of devs? Is it just create a thread an hope enough people show interest? Should we do a roll call of how many actually are interested in rooting this phone?
thebluecoat said:
I've already tried that, didnt work for me, got "Invalid device ID" however, I cannot make a gold-card because I always get "damaged sd card" or windows says I need to format it right. I'm 100% sure I did it right to three different SD cards, and I still got the same error.
--edit-- if you successfully make a goldcard for this phone, Ill pm you for shipping info LOL!
Click to expand...
Click to collapse
No.. I got the gold card made. The only reason it ever comes up as damged or reformat is because you applied the goldimg to the logical drive which is at top of list as opposed to Physical REMOVABLE DISK at the bottm. Its the only time I can get the error. but if I apply the goldimg to the logical drive it makes a perfect goldcard everytime. I tested it on aspar g1. So... its not a godl card problem lol
maxisma said:
Make a goldcard.
Then try to find an official HTC RUU with version higher than 2.08.531.1 but which has an open SPL or is only Cupcake so 1-click-root will work.
If that doesn't work just try a regular sappimg.nbh, but with goldcard too.
Click to expand...
Click to collapse
Looking through here for HTC RUU roms I seem to keep geeting dragged to the hero and WinMob forums which I dont think I should be. Where exactly would I find this?
My ideas are..
Find a rom of higher version that is rooted see if it works.
Find an older 1.5 build (which is proving hard) and go from there
Try and flash the rooted fender donut over it and see the results.
My main problem with this is, I dont think its able to be downgraded past 1.6.. Just like newer PSP's cant be downgraded to 1.5
After formatiing my 2gb sandisk (which may be the problem) now when using the 98mb SAPPIMG.zip I get "Main version is older" instead of "Device id failed"
Is this a good sign to on the right track? Im going to try the 62mb SappIMG.zip from amon ra's tut as soon as its done downloading and see if theres a difference.
Now.. what does main version is older mean? The firmware or the spl/radio. if so... is there a newer version i can use/or substitute a file for the Sappimg.nbh to just install a higher version rom.
Man.. The G1 is so much easier to do all this with lol
YEEEEES. Ok. I freaking fracking diddley did it. OMG i was sooo scared.
Wooo So happy now.
I unable to update my OP and thread title if a mod can help me with that.
If noone minds I am going to post my first ever tutorial on something. this was a real pain but I am up and running on Amon ras latest rom for now. On to the recovery....
EDIT-- Got a fully functioning Manups 2.1 1.5 going. THEBLUECOAT if you want to know how to do it PM me... Otherwise give me about an hour or so and I will have a full tut posted
AHHH.. EVEN worse.. I noticed now that it says I have a 32b board NOOOO
EDIT2- Such a dumbass I didnt make a backup of the orignal. Poop.. I liked the boot image and music apps. I just wish I could figure out why all roms so far dont recognize the touch screen as being there and want me to use the track ball. Even power button has 1 option Power off lol
UMMM touch screen not working. What didnt I do?
How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement
thebluecoat said:
How do I get my SDCARD to not show up under logical, its under logical but the drive says "removable disk" all I have are phones to use, would this not be possible or would I need a driver replacement
Click to expand...
Click to collapse
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.
crypysmoker said:
you HAVE to use a card reader. thats where your problem has been. You have to use a card reader so that it sees the reader AND the card seperatly. So in hex, you dont see Logical drive then a row and then Physical and a row?
Im not pissed... I had the 2010 eng spl... trying to flash roms. No rom would use touch screen. so started over and ened up with a 32 b board now and a perfected spl again.... lol Argh... trying through it again now.
Click to expand...
Click to collapse
Ok, so how did you get the spl changed? and what did you flash that was 32b?
chrys9989 said:
Ok, so how did you get the spl changed? and what did you flash that was 32b?
Click to expand...
Click to collapse
I used Amen ras newest Fixed spl fix 1.33.2010, made my gold card, renamed that file to SAPPIMG.zip, went into Hboot and it flashed without a problem.
I then rebooted into Hboot seeing the new Info.. Didnt look at the 32a/32b part yet so not sure if it happened there.
It then rebooted into whatever rom that file came with (look for Amen ras Fixed spl thread) the rom came up, with no tocu screen. only the track ball worked.
I rebooted and stupidly jumped right into flashing a couple of the new clair builds from king and.. the othe rguy lol. neither had touch support. I then went back to update to manups newest and used the 32a port file, and no touch screen...
I then rebooted and flashed the amen ra rom and rebooted into a Mytouch boot loop... went into Hboot and had a perfected spl and S-on. ARGH.
Just started from scratch again. Im really wondering why i loose touch screen support and why in the hell it say 32b now
So, when I got my Dream, I instantly wanted to root it. I did so using with a little deal of difficulty using the goldcard method. It was fine, put ROM's on and everything..
Anyways, it stopped charging, sent it to Optus. They had it for almost a month. When i got it back, it had been unrooted and put back on factory Donut firmware.
Now, im attempting to root it using the same method.
I have a different SD card than when I first rooted it, so naturally, I generated a goldcard for the new SD card. Put the DREAIMG.nbh file on, and tried to downgrade.
And for some reason, I keep getting the 'not allow' error on the 'rainbow screen'..
I've been told it MAY be a 'perfect SPL'.. idk if thats bs or a possibility, but any help would be greatly appreciated=]
So I've really gotten myself into a pickle I suppose. I bought this phone off a guy, and what do I do I tinker with it. Well he just so happens to have an updated hboot file sitting on the sd card that I updated. Long story short I somehow managed to get the phone rooted, but S-ON yet the recovery mode was working. I needed to change it from clockwork to RA which it seems it didn't like. So I attempted to just unroot the device and reroot it well. Now I'm stick because the 2.10 root wont work, and the 2.15 tells me I'm not on the correct hboot. I've been nosing around time to find for the life up me an updated PC36IMG that contains the current 2.3.3 with hboot 2.15-2.16 If anyone can point in the right direction it would be greatly helpful.
Spokenlastchance said:
So I've really gotten myself into a pickle I suppose. I bought this phone off a guy, and what do I do I tinker with it. Well he just so happens to have an updated hboot file sitting on the sd card that I updated. Long story short I somehow managed to get the phone rooted, but S-ON yet the recovery mode was working. I needed to change it from clockwork to RA which it seems it didn't like. So I attempted to just unroot the device and reroot it well. Now I'm stick because the 2.10 root wont work, and the 2.15 tells me I'm not on the correct hboot. I've been nosing around time to find for the life up me an updated PC36IMG that contains the current 2.3.3 with hboot 2.15-2.16 If anyone can point in the right direction it would be greatly helpful.
Click to expand...
Click to collapse
Had the same issue, any luck in finding an answer?
Spokenlastchance said:
So I've really gotten myself into a pickle I suppose. I bought this phone off a guy, and what do I do I tinker with it. Well he just so happens to have an updated hboot file sitting on the sd card that I updated. Long story short I somehow managed to get the phone rooted, but S-ON yet the recovery mode was working. I needed to change it from clockwork to RA which it seems it didn't like. So I attempted to just unroot the device and reroot it well. Now I'm stick because the 2.10 root wont work, and the 2.15 tells me I'm not on the correct hboot. I've been nosing around time to find for the life up me an updated PC36IMG that contains the current 2.3.3 with hboot 2.15-2.16 If anyone can point in the right direction it would be greatly helpful.
Click to expand...
Click to collapse
Hey, here's what helped me. It's an RUU and worked running on my computer to change the hboot back to an older stock rom. I then accepted 1 update which took me back to the most recent version where I was able to use unrevoked/revolutionary to root my phone again. HEADS UP!!! Do NOT accept the most recent update from HTC/Sprint. This will change your hboot to 2.18 which there is currently no root. It also locks bootloader, there is an unlocking method, but simply put the easiest way to do this is:
1. http://forum.xda-developers.com/showthread.php?p=15282635#post15282635
Go here and download the RUU
2. Unzip and run the EXE file on your computer. Make sure usb debugging is connected and that you make sure the screen doesn't turn off in the display settings.
3.Let the program do it's thing, it will tell you when it is finished and will reboot your phone (Heads up, it wiped my phone so make sure you backup your info.)
4. Double check the Hboot when it's done, you should be able to root from there. I accepted one update b/c this seemed to be froyo and the 1 update I did took me to Gingerbread, it prompted me to update again but DON'T accept the latest OTA
From here you should be set and ready to go about rooting your phone. This puts it back at stock as if you just got it. Hope it helps. I am kinda new at this and it took me a whole day to figure out, but this was pretty easy once I understood, the whole process only took about 20 minutes! . It's funny 3 days ago, if I read what I just wrote about EXE and Ruu's and whatnot.. I would not have known what any of it meant. I'd be happy to help explain better if need be. But wanted to update you on what worked for me.