Hi,
I recently got myself a 16-gig micro-sd card on which I want 3 partitions:
1) 12gb (FAT32): Media
2) 2gb (ext2): Apps2SD
3) 2gb (ext2): Debian
I've been trying to make them with gparted and I can't create 2 ext partitions. Whenever I try to format 3, then 2 gets corrupted. Then I fomat 2 again and 3 gets corrupted.
Everything works OK with just 1 FAT and 1 ext partition. The problem comes when I create the two ext partitions.
Does anyone have an idea about what the issue is? Maybe it just can't be done?
Thanks in advance.
Related
Hi,
I am now using a 8GB SD card for my phone (around 6GB FAT32 and 1GB EXT2).
Now I am going to change into a new 16GB SD card (that I will create 1GB EXT2 partition soon)
Can anybody tell me how I can move the EXT2 partition from the old card to new new one using my pc?Thanks!
The only way I know of to do it with a pc would be to use a Linux distro, live or otherwise, then read the data from the ext partitions and copy it over manually if you can have both cards hooked in at the same time (one in a reader one in the phone).
Thanks but my Desktop is running Windows 7,
is there any alternative solutions?
Hi,
I have a 16GB Micro SD card that I want to create a 1GB exts partition on.
I have the free versions of Paragon and Acronis, but it would seem I need the full version to create a partition on an SD card?
I therefore got minitools partition manager and I was able to create a partition, but it is unallocated and it's status is NONE.
The FAT32 partition is Primary and the unallocated one is logical.
If I click on this partition almost everything is grayed out so I cannot format to ext2.
Please help.
I am running this on a cheap card reader from ebay on Windows XP.
PoshCat1 said:
Hi,
I have a 16GB Micro SD card that I want to create a 1GB exts partition on.
I have the free versions of Paragon and Acronis, but it would seem I need the full version to create a partition on an SD card?
I therefore got minitools partition manager and I was able to create a partition, but it is unallocated and it's status is NONE.
The FAT32 partition is Primary and the unallocated one is logical.
If I click on this partition almost everything is grayed out so I cannot format to ext2.
Please help.
I am running this on a cheap card reader from ebay on Windows XP.
Click to expand...
Click to collapse
Ext2 obviously
If it helps the card has a 4 on it, so does that mean it's class 4?
I think I'm a bit dumb !!!
I'd resized the partition only, so it was simply unallocated.
Are there any free partition software downloads that allow me to create a partition please?
It is MiniTool Partition Wizard Home Edition from partitionwizard.com
sanelh said:
It is MiniTool Partition Wizard Home Edition from partitionwizard.com
Click to expand...
Click to collapse
Cheers, I managed that and now I have another problem.
Thread to follow.
Hi, I`ve got the same problem. Have you found out how to do it?
flash608 said:
Hi, I`ve got the same problem. Have you found out how to do it?
Click to expand...
Click to collapse
I did, I think I used ROM Manager in the end.
It didn't work to begin with, I played with the Partition software above, then I went back to ROM Manager and it worked.
help
I got class 4 4gb memory card and has used minitool partition wizard to create 3.5gb fat32 partition and 500mb ext2 partition. but when i connected to my SE x10mini and it says 'damaged memory card'. but then i format the memory card via my phone and the ext2 partition has been erase. may i know any suggestion to create 2 partition and make the phone able to recognise the memory card??
one more question, may i know what is the next step to make ext2 partition to be apart of system's space??
I`ve managed to make two partitions using Gparted (win).
I have an HTC Hero rooted with stock 2.1 firmware
I installed Link2SD and read through the development post on this forum but encountered and issue I cannot figure out how to resolve.
I reformatted my SD card with 2 primary partitions using MiniTool. I re-sized my standard partition to allow for an additional 400MB partition then formatted the unallocated memory to ext3 format.
So now I have 2 partitions that look like this in MiniTool (4GB SD card):
Partition FileSystem Size Status Type
-SDCard FAT32 3.30GB Active Primary
-AppsPartition ext3 400.06MB None Primary
(sorry cant get more spaces between words, dont use forums often)
I thought that was all I needed to do but when I put the SD Card into my Hero it just tells me I have a damaged SD Card. What do I do to fix this?
I just wanted to say I figured this out on my own. I don't know what the problem was but I reformatted the SD card from the Hero and it only formatted the SDCard partition and then I had to reformat the AppsPartition to FAT32 file system in order to be usable by link2sd and it worked.
No idea what caused the problem to begin with but got it resolved, that's all that matters right?
I had problems too until I formatted partition 1 as FAT (aka FAT16 - NOT FAT32), and the second as FAT32 or Ext2/3.
The key for me was the first partition being FAT.
Hi all, I have just changed my sd card on my Sensation Xe. But the new Sd card is already partitioned and i want to delete this partition. I have read that to delete partition I have to format it from the recovery but I don't know how can I do it.
Recovery: 4EXT Recovery Touch.
CHANGE TOPIC: I have solved the problem of this topic. Now i want to ask you another thing. If i go to partition sd card from recovery i have to select the space i want on my 1 partition (fat32) but, even if i have 16 gb on sdcard, my first partition can be only until 8 gb. Why? Then it ask me the space i want for the second and the third partition. What is the 3 partition?
Thanks.
Well this is what it says in the classic 4 EXT Recovery thread OP.
Full support for up to 2 sd-ext partitions + swap
Click to expand...
Click to collapse
So it should be another 2 sd-ext partition or a partition for Swap.
Personally I would just format it with my computer and a SD card adapter. I always do a low level format first them a Fat 32 format, but that is just me.
But why I can use more than 8 gb for fat32 partition?
Hi all.... I haven't found specific answers to my questions so am posing them here.
I am running CM11
Can you expand your internal storage without doing an entire ext sd card to internal swap? I want to use only part of my ext SD card to enhance the internal storage.
Is there any point in formatting multiple partitions on the ext SD card as fat32 / ext4 / Linux swap anymore? I thought doing this would have part of the partition used for internal storage and part as the ext sd card storage. Formatting the SD card through CWM deletes all partitions and formats it all as FAT32 for external storage only.
Thanks and go Blaze haha
Dave
You can partition your SD card on your pc into pieces that android won't recognize..follow this as a guide..the program is fantastic
http://forum.xda-developers.com/showthread.php?t=1083863
...sent from a gummed up Nexus 7 using Tapatalk pro mofos...
Thanks ink. I will look at this more tonight but I did use Partition Wizard Home and formatted the first partition as FAT32 which is recognized as the external SD card1 in CM11 but the 2nd EXT4 partition isn't recognized by the ROM it seems. Maybe I just don't know how it would be used but checking the storage in settings didn't have any change to internal.