Hi guys,
I have just bought the PO S520 case for my Desire. What can I say? First impression - a nice case with a sleek minimalistic design.
The leather quality is good, you can actually smell that it's real leather (not the faux leather as sold plenty at eBay). The leather is quite soft, you can bend the case very easily if you want to. There are also two.. erm.. "hardening plates" inside the case itself that hold its shape so that it does not feel too soft just like a piece of leather. The "plates" are quite soft as well, apparently made from thin plastic or hard paper. Those are nothing that you can actually see, as they are "sewed in" into the front and rear part of the case. I hope you understand what I mean.
The ex-Blackberry owners having those super-hard-leather-cases that feel like leather but are hard as a rock - no, the PO S520 is not like one of these.
The inner lining is made of some kind of a soft polyester fabric (the one you meet quite often on the inner part of skiing winter gloves, for example). The quality seems to be ok at a first glance.
The phone fits nicely in the case, no parts are sticking out.
The pouch felt a bit tight for the Desire at the first time, (specially the lower part) So i tried to see how stretchable it is. On my way from Tottenham Court Rd to South Kensington (20 mins roughly) I was trying to stretch it with a mock-up Desire (the one they use at stores for display purposes) inserting it slightly angled, holding the pouch a bit skewed etc. When I arrived to work the pouch already felt much more comfortable. So, the verdict is ==> Yes, it does stretch.
As for the pull-out strip. I was very worried about this one as it actually wraps around the whole lower part of your phone when it's inside the pouch. And, of course, when you pull your phone out, it experiences a lot of friction. I was afraid of the phone's soft-touch coating to disappear with time. Looking more carefully has shown that HTC has at least thought about this thing and has made the "inner" side of the strip (the one that faces your phone when inserted) a bit more silky and glossy that might *cough* help the soft-touchiness to live a bit longer.
One pleasant thing to notice was a small magnet inside the end of the pull-out strip. Thus the end does not flutter around but sits tight attached to the case at all times.
A bit less pleasant thing to notice were the inner stitches. On one of the pics showing the inside of the pouch you see two black stitches on the inner-backside. Those are not very flush and may leave "soft-scratches" on the backside of your Desire, so be careful or ask your mum for a solution, she definitely knows how to handle the stitches I personally do not think that this is a real issue as the stitches are nothing "hard" or "sharp".
Right now I have used the pouch for some 90 minutes. Will keep playing with it for the rest of the day and will update the review if needed.
If you have anything to add - don't be shy
Cheers.
Thanks much for your review, very detailed. But could I ask where did u get this case? I thought its due for release on 15th..0.0''
http://www.inkino.co.uk/zen/index.php?main_page=product_info&cPath=68_40_491&products_id=3801
I have visited their store this morning as I did not want to wait for delivery
Ordered, everywhere else has this down as July delivery so getting it now! Looks good
SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
http://www.superetrader.co.uk/htc-desire-official-pouch-case-po-s520-p-11955.html
blackfox888 said:
SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
http://www.superetrader.co.uk/htc-desire-official-pouch-case-po-s520-p-11955.html
Click to expand...
Click to collapse
Thanks for this. All I need now is 1 more battery and Im done...
D'oh! Should've looked for it cheaper - ah well, only a fiver!
I ordered one and its been already dispatched from KingofGadgets.(can ne ordered at amazon.co.uk)
Received mine this am, very good quality, looks the part but wow! is it a tight fit I'm glad I was sitting on my couch when I tried it the first few times as I dropped the phone 2 or 3 times as I was trying to push the phone into the pouch, I imagine it will ease up over time but I would be careful when using it initially.
Dont forget to insure your phone.
Thanks for the review, have one on the way...
Thanks for writing this, I am looking alot at cases atm and this one is definitely a contender for 2 reasons, A being an original case and B it's quite cheap, and C (I know 3 reasons ) its simplistic in it's appearance but seems functional.
I would really like some more pictures of the phone fully inserted though. Despite that it appearently is a tight fit when you first receive it, I kinda wonder how big it is/makes the phone.
// Cole
HD2 one was just as tight, got loose as you use it so not worried about that - phone is insured though
When inserted, the phone is not "bigger" at all. The space it takes in pocket is almost the same - that was one of the reasons I bought it.
As for tightness - I did the following trick: I have wrapped my Desire's lower part in paper (took a half A4) to make it thicker. Then pressed the phone in (was not that hard, had no worries to damage the phone or case). Waited for some minutes, pulled the phone out. Voila! Now it fits perfectly - not too tight, not too loose.
As for the stitches - does anyone else experience this? Try pulling your Desire out so that the phone's backside rubs them slightly - do you see any marks? (yes, I know I am being waaaay too perky here, but still )
Sounds good, I've settled for the pictures you posted earlier (which looked quite good I might add), and ordered my own pouch from mobilefun.co.uk (quite low shipping cost of about 4£ within EU, very good).
// Cole
blackfox888 said:
SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
Click to expand...
Click to collapse
thanks, I ordered few days back, got it today,its perfect fit.
temka said:
As for the stitches - does anyone else experience this? Try pulling your Desire out so that the phone's backside rubs them slightly - do you see any marks? (yes, I know I am being waaaay too perky here, but still )
Click to expand...
Click to collapse
My case just arrived and I must say I concern about the scratch on the backside as well
LPT said:
My case just arrived and I must say I concern about the scratch on the backside as well
Click to expand...
Click to collapse
I have tried to solve it by "polishing" the inner side of the case. I have a mock-up Desire (used for display ppses in stores) and i was simply pulling it in- and out of the case, pressing slightly harder on the back side, trying to "rub the stitches away". Two things I have noticed:
- the stitches did get "polished" and do not scratch the phone that much now, almost not at all.
- the soft-touch coating of a demo-mock-up is way better than the one they apply on the real phone. The mock-up doesn't get any scratches at all, even if I try to scratch it with nails! This is probably made by HTC on purpose, to keep the demo-phone look good in stores despite being touched and dropped a lot. As for the real phone - of course it's better for HTC to make us buy a new battery cover for some 15-20 GBP in the distant future. Nothing to blame them a lot about, actually, every company does smth like that
New battery cover, sir?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199270
EddyOS said:
New battery cover, sir?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199270
Click to expand...
Click to collapse
Just as I said ))
...but hey! It's good that they do exist!
Jus received mine, very good quality for the price I must say!
I'm not really worried about the stitches, they look harmless to me
Related
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
legolas.w said:
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
Click to expand...
Click to collapse
I can say that it works very well as far as protecting your phone. I have a N1, but my cousin was trying to see if her Sprint Hero could fit in the sleeve and just when she put it in the sleeve, it fell on the floor. We slid it back out of the sleeve and apart from the battery door popping off, and we snapped it back on, all was well.
I have been using it and it seems to work well enough. It is slim and has the cute android on one side. I'm going to put the Zagg body protector when it comes out in conjunction with the sleeve.
Thank you all for the replay. I think I will stay with Clear-coat screen protector and the sleeve. but can anyone please post a photo of the sleeve ?
specially when the cell phone is inside the sleeve. I want to know whether the sleeve fully covers the phone or the phone is taller than the sleeve.
Thanks
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Hey, that's a really nice case! Thanks for the pic!
I like the little Android on it. I wish Google would make an actual case to carry on your hip with that on it.
Bicster_ said:
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
Click to expand...
Click to collapse
The same thing happened to me. i dropped mine but it wasnt 4 feet and the phone came out alright. like you said it was scary.
The case is nice, it is slim and cushy. That said I don't think it will protect it from serious falls. If you are careful its nice, it slips in and out easily and doesn't add much width of it at all.
I will be looking into other things as well...that you don't need to remove in order to use the phone but we will see. I hate adding width to the phone at all
The sleeve is just OK for now, until better protective cases hit the market!
Thanks everyone for sharing the pictures and your thought.
SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Thank you for the photo,
is this taken with the Nexus one highest camera resolution?
NPS_CA said:
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
Click to expand...
Click to collapse
The video is amazing, thanks for sharing it.
I am waiting for my N1 . Hope it arrive soon :d
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
milkham said:
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
Click to expand...
Click to collapse
this is what i like most about it
I think the sleeve does it's job, however I cannot hear my phone calls very well when it's in the sleeve, and if your trying to answer a call when you do actually hear it you have to hustle to remove it from your pocket and try to get it out of the sleeve to answer the call. It's tricky. I cannot wait for the 2 docking stations that are coming out at the end of the month. One for the desktop and one for the car. Both will use the little gold contacts on the bottom of the phone. So you do not have to use a docking station with a damn micro usb sticking out of the docking station, you will be able to just set your phone onto these stations, and it will charge without connecting anything.
tommyarmour said:
I cannot wait for the 2 docking stations that are coming out at the end of the month.
Click to expand...
Click to collapse
Eh, who said anything about them coming out at the end of the month? They haven't been announced at all, much less given release dates. We only know about them because they passed through the FCC.
From my past experiences ...
... Just wanted to share this: I have had several similar sleeves that came with phones I have had in the past and here are common problems I have found with them:
(1) Most of them use glue in addition to stitching in their construction. After months of use (and possibly from body heat if commonly stored in pocket), the glue starts to marr the phone
(2) Most of them have nice soft OUTER finishes but not so on the inside. This is true for the N1 sleeve too. Feel the roughness of the edges and sides on the inside ... not sure anyone would really want their phone sliding up and down on that especially if the sleeve is snug.
(3) Most of them tend to double as screen cleaners if used a certain way (either on the inside or using the outside), but end up leaving surface scratches in the long run.
(4) Even the best of screen protectors tend to affect the screen resolution and/or viewing angle even if just slightly.
Granted that these experiences ranged over several manufacturers (Sony Ericcson P series, HTC, etc) and several skins/screen protectors, but I have now built up my knee-jerk reaction of a shudder everytime I think of a sleeve or a screen protector .... of course, thats just me
Just my two cents ....
On a side note, I am in search for a vertical flip style ("book style") for my N1.
I guess my logic is this: protect when not in use, but let me have the best resolution when IN use ... in case anyone knows of a good one, please let me know?
Thanks!
I got my Desire HD just yesterday and before I make the big switch from my trusty G1 and wanted to install this protection that I have had for a good few weeks now.
The full body protector set I got consisted of one for the screen, a main back part, sim card slot and battery slot. It came with a spare set too.
To be honest, I'll cut to the chase. The installation was like any other full body installation in that you've got to keep your hands wet with the sopy solution (I had a spray bottle left over from a Bodyguardz set I had for my HD2 I once had). You must ensure you peel the parts off carefully making sure you don't stretch them. Bearing this in mind and being experienced in fitting this type of protection, I found the 'cut' of it to be poor.
The protection isn't "full" in my opinion. It doesn't stretch round the edges and corners therefore the most vulnerable areas to scratches and knocks is not protected. But worst of all, the deal breaker for me, was the battery cover area. I first realised that the main back part wasn't going to fit correctly when trying to put it on. The design of the protection have wrongly measured the battery cover slot and they believe it to be smaller than it is. This means that I had to cut a little bit away from the main back part. Consequently, the little piece of protector that goes on to the battery cover was too short and again means it does not provide "full" protection. The screen protection, I would of hoped, could of covered the whole thing right up to the earpiece grill but it just covers the screen.
Whether or not the screen will be less responsive, it tints yellow after time or shows any other aspect of poor build quality, time shall tell and I will edit this review accordingly.
So it is in my opinion to wait for another brand to release, InvisbleShield is in my sights as soon as its available.
Any questions, Ill be more than happy to answer
Thanks for the review but it'd me much better If you could share the front screen as well.
BTW you can purchase bestskinsever (BSE) DIY size and cut out any shaped as you need. Especially for that battery cover, you can solve yhe problem with BSE
eozen81 said:
Thanks for the review but it'd me much better If you could share the front screen as well.
BTW you can purchase bestskinsever (BSE) DIY size and cut out any shaped as you need. Especially for that battery cover, you can solve yhe problem with BSE
Click to expand...
Click to collapse
Hi there, sorry yeah I'll upload a pic of the screen tonight. Kinda rushed the review earlier today just before work!
Thanks for the tip about Bestskinever though I think Im going to wait for Invisibleshield or hope that Bodyguardz produce one soon. I really like that for my old HD2
I bought mine, arrived today, it was awful, do not buy, it's stupid. I scrunched it up, do you want a picture of that? £10 down the drain.........oh well, it happens. =D
Zagg Invisible shield
I believe the Zagg invisible shield is already available. when you go to the Zagg web site, just search for HTC desire HD, and it should bring you to the site. I just ordered Maximum protection for AUS $18 (including shipping), but that's after 50% voucher. You can look for it here, and maybe post a request (im sure someone will be nice enough to share.) http://forum.xda-developers.com/showthread.php?t=664386
I do believe the Zagg quality is better (including the cut).
Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Thank you for contacting ZAGG, where we are zealous about great gadgets! My name is Dez G and I appreciate the opportunity to assist you.
We ship to most places all over the world, I see no reason why we would have a problem shipping to your area. You can find a list of local re-sellers in your area via the following link. My best suggestion is to contact these re-sellers for prices. Please note that we can not offer refunds on ZAGG purchases made outside of our website but if you need any of your items replaced under the lifetime, or 1 year replacement warranty we would be happy to assist you.
Click to expand...
Click to collapse
cd993 said:
I got my Desire HD just yesterday and before I make the big switch from my trusty G1 and wanted to install this protection that I have had for a good few weeks now.
The full body protector set I got consisted of one for the screen, a main back part, sim card slot and battery slot. It came with a spare set too.
To be honest, I'll cut to the chase. The installation was like any other full body installation in that you've got to keep your hands wet with the sopy solution (I had a spray bottle left over from a Bodyguardz set I had for my HD2 I once had). You must ensure you peel the parts off carefully making sure you don't stretch them. Bearing this in mind and being experienced in fitting this type of protection, I found the 'cut' of it to be poor.
The protection isn't "full" in my opinion. It doesn't stretch round the edges and corners therefore the most vulnerable areas to scratches and knocks is not protected. But worst of all, the deal breaker for me, was the battery cover area. I first realised that the main back part wasn't going to fit correctly when trying to put it on. The design of the protection have wrongly measured the battery cover slot and they believe it to be smaller than it is. This means that I had to cut a little bit away from the main back part. Consequently, the little piece of protector that goes on to the battery cover was too short and again means it does not provide "full" protection. The screen protection, I would of hoped, could of covered the whole thing right up to the earpiece grill but it just covers the screen.
Whether or not the screen will be less responsive, it tints yellow after time or shows any other aspect of poor build quality, time shall tell and I will edit this review accordingly.
So it is in my opinion to wait for another brand to release, InvisbleShield is in my sights as soon as its available.
Any questions, Ill be more than happy to answer
Click to expand...
Click to collapse
It really looks bad.
Ethania said:
It really looks bad.
Click to expand...
Click to collapse
It is
I only installed it to have some form of protection without covering the phone. Hoping Invisibleshields attempt will be better, probs will buy one soon!
Edit: Ive just emailed them asking how much protection their best product offers. Heres hoping thatit covers the phone entirely, edges included!
LeviathanPT said:
Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Click to expand...
Click to collapse
If they make it like their iPhone 4 full body protection - don't bother . The size is wrong by 1-2mm, the cuts for the speaker, button, etc, also don't match the actual size (see the attached picture). I installed just the front and back protectors on my wife's iPhone, because seeing how wrong they are on the plain flat surface, I don't want to know what they did with the curvy edges... I ordered some original HTC protectors for my DHD because IMO they are the perfect cut and with some luck I'll manage to install one of them without any bubles (it's not impossible - I did it on the Touch HD).
LeviathanPT said:
Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Click to expand...
Click to collapse
Why cant you just ordered directly from their official sites? dont need to go through their resellers. Dont think it's much cheaper to get from their local resellers. Considering you can also get discount vouchers from nice people in this forum. Shipping is not expensive (only cost me $5).
Stupid me! I bought 2 pairs before you! I got my phone about two weeks now, so I decided to have some temporary protection until something better comes out.
And after installing the first one I really felt like I was fooled its so ugly and it doesnt fit well so I decided to sent the 2nd one back the morning after... but too late my mom had already throwed the 2nd one in the recycling bin...
Now Im searching for a cheap but good quality silicone case and a cheap look a like the default HTC leather case, cause I think Ive spent enough on screen protectors!
btw my phone has still the devdef protection on it and I have to admit, it has 2 pros
* No sign of condense
* Stretchy protector
but its 100% NOT scratch proof
anoniem said:
Stupid me! I bought 2 pairs before you! I got my phone about two weeks now, so I decided to have some temporary protection until something better comes out.
And after installing the first one I really felt like I was fooled its so ugly and it doesnt fit well so I decided to sent the 2nd one back the morning after... but too late my mom had already throwed the 2nd one in the recycling bin...
Now Im searching for a cheap but good quality silicone case and a cheap look a like the default HTC leather case, cause I think Ive spent enough on screen protectors!
btw my phone has still the devdef protection on it and I have to admit, it has 2 pros
* No sign of condense
* Stretchy protector
but its 100% NOT scratch proof
Click to expand...
Click to collapse
I hate silicone cover more than anything, but try this mate, only £2.95, but I promise that this is the best protection out for the Desire HD so far, await the case-mate barely there if you want a metal, as I am doing, I got conned by this stupid DevDef protection!
Hi!
What is the most suitable case for protection when phone drop?
Definitely Case Mate
http://www.case-mate.com/Samsung-Ga...ung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
victor79 said:
Definitely Case Mate
case-mate .com/Samsung-Galaxy-S-T-Mobile-Vibrant-Cases/Case-Mate-Samsung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
Click to expand...
Click to collapse
Or this case is better? (otterbox)
otterbox .com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS,default,pd.html?dwvar_SAM4-GALXS_color=20&start=1&cgid=samsung-galaxy-s-cases
demandware. edgesuite .net/aaez_prd/on/demandware.static/Sites-otterbox_us-Site/Sites-masterCatalog_OtterBox/default/v1295635693828/pdfs/sam4-galxs-info.pdf
how do you think?
+1 for Case Mate, I'm using one and it is very solid and durable, not sure about the otterbox but the Tough Case of Case Mate have many good reviews. Only one down side of it is that switching in/out battery more difficult but I see that the thing I have to pay for the good protection
Case Mate rocks!
Even a Case Mate "Barely There" is good enough for a drop on a even surface. No contact with the screen and the frame if dropped. Happend to me very often.
Saves a lot of money: http://www.amazon.de/Silicon-Samsun...9MU6/ref=sr_1_2?ie=UTF8&qid=1295719519&sr=8-2
It looks a bit luxury at the backside, like juwels. It's glossy but not slippery at all. Very handy as the Galaxy without any case is extreme slippery. It doesn't collect any dust and the screen is protected by the overlapping flange at the front.
Doesn't look like an old truck tire like Case Mate but it's a quiet well protection as I experienced when dropping my Galaxy often enough in my workshop.
How are the Cheap silicon cases ?
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Superuser_x said:
How are the Cheap silicon cases ?
Click to expand...
Click to collapse
Mine fits absolutely satisfying. No spaces between phone and cover, but you can rip it off by one turn with the hand.
The only thing where you feel that it is cheap: there is a (very small) welding seam around as it's made of two halfs. You can use a razor blade to get rid of, very easy.
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Click to expand...
Click to collapse
Unfortunately...
http://shop.ebay.in/i.html?_nkw=(i9...ilicon*&_osacat=0&_trksid=p3286.c0.m270.l1313
Some others are available, but very soft. But better than a crashed phone.
Maybe you can try to order in US or China. But there is absolutely no warranty to receive it...
How is this one, let me know your comments on this please - amzer.co.in
(iam sorry i cant paste the exact link due to new user restrictions)
if u can browse thru this website and look for the- silicone jelly case for samsung galaxy.
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Could not help laughing on that " Growing Boobs" thing.
But on a serious note, well i think you are right as Ive heard about cancers arising from long use of cheap quality plastic.
But i think i will try this.Going for the Green one
Going for the Green one
Click to expand...
Click to collapse
Would be my choice too. Like the eye catcher same as luxury style.
Recommended fashion which meets that style...
http://www.burlington.de/de/men.html
*SCNR*
This might protect the phone from a small drop. But might create a small bulge in your pants (...not in that way).
http://www.easydevices.co.uk/products.asp?partno=OTTBOX26SAMGS&model=
stepsch said:
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Click to expand...
Click to collapse
You got it half right - the man boob thing actually happens, but that's not because it goes through your skin. The chemical used to soften plastic are structurally similar to estrogen, which is the hormone responsible for puberty development in females. Prolonged exposure to the chemical can sometimes induce side effects. But that's usually through the mouth instead of through the skin. Human skins are quite resistant against foreign chemicals.
I've read some tests about plastic grips at construction tools, same at childrens toys (similar tests at adult toys). There is clearly written: contact with skin is able to damage whatever.
However, I still prefer estrogen in women.
So, whenever I am home I pull the covers from the phone. (It's also much prettier without any additional cover.)
I am just thinking of a kind of self-adhesive lamination - maybe clear like glas - on the battery cover, so that the phone will be less slippery. That wouldn't make it more stable when hitting the ground, but it wouldn't slip so easy out of your hand.
Unfortunately the round desin of the housing at all isn't very safe to get a good grip. (That's much better at iPhone4.)
I've been looking to buy a CapDase Soft Jacket 2 Expose. (Kindly Google it, as I cannot post external links yet)
I'm yet to find a webshop that will ship it to the Netherlands. Anybody knows one?
Today i recieved my Amzer silicone gelly case.
Looks good, feels good and doesnt burns a hole in my pocket.It has a nice rough finish on the sides for a good grip.Also my SGS feels more sturdy to hold.
Otterbox just outed the commuter for galaxy s
looks better than the casemate toughcase
Definitely Case-mate Tough!!
...omg... you don't really want to pay 35 bucks for a piece recycled truck tyre...
Greetings to India, I like the fresh green. ...and none of the truck tyre fans will steal it.
I do not believe that all those 5 times-more-expensive-protectors are 5x better in use, not even more than 1,1x.
Save your money, buy some nice apk instead.
Btw: ... in a few month there will be a new phone available and it doesn't matter anymore if yours is scratched or not.
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
Currently choosing between Galaxy S6 and iPhone 6. As silly as it might sound, a good leather (shell) case is one of my highest priorities.
I broke 3 iPhone 5's until I put the official leather case on it (I always disliked plasticky cases).
It added more grip, and just enough protection from average falls.
Ridiculous really. Choosing a $1000 piece of tech based on a $50 accessory. But that's just how it is.
Hopefully someone knows of something.
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: http://www.vajacases.com/galaxy-s5-leather-cases/premium-leather-grip
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
There actually was a thread on this subject until recently, but when trying to find it now, I just realized it has inexplicably been deleted. Had a few good examples in it, but they're obviously not reachable now. I'll post the link here below in case the thread turns up again.
http://forum.xda-developers.com/galaxy-s6/accessories/simple-leather-wallet-case-t3095597/
sankyou said:
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: {link removed because I'm new and can't have links in any of my posts}
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
Click to expand...
Click to collapse
I contacted Vaja through their website back in April and they told me that it was under development. When I checked in last week, they said that a case for the S6 "is not currently being planned for production. We planned to develop a line in the past but I am afraid right now the project has been cancelled."
Whether that means it may show up later, who knows, but for now we're out of luck. Boo.
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
sosquidtaste said:
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
Click to expand...
Click to collapse
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Looks like one of these would work. Thanks for the tip.
lucas.scott said:
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Click to expand...
Click to collapse
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
sosquidtaste said:
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
Click to expand...
Click to collapse
Awesome man - thanks for the info!
Much appreciated on the pics!
ronnotronald said:
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
Click to expand...
Click to collapse
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt1_s6
BROWN: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt5_s6
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
lucas.scott said:
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
Click to expand...
Click to collapse
I know exactly what you mean. Originally I wanted an Xperia Z3, but there are literally no cases available without massive side cut-outs. The Z3 one is borderline ridiculous: http://www.bouletta.com/index.php?id_product=103&controller=product
The Galaxy S6 one isn't too bad. Not as good as the standard Apple one though unfortunately =\
I have the second case linked from ebay earlier. It is nowhere near leather feeling. I would say it feels more like a smoothed out velvet than anything. Also, the case does not really offer any protection for the front. It might stick out 1mm past the screen. Overall it is an okay case for the price, but if anyone wants a "leather" feel to a case, this is not the one for you. The buttons are not that great either. You lose most of the tactility from the keys with the case. I imagine over time they will break in and feel better, but after a week of use it doesn't feel great, but doesn't feel as bad as it did at first.
chinesefood said:
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: no links for me
BROWN: no links for me
Click to expand...
Click to collapse
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Hey that bouletta case looks really nice. However, is the thickness of the back of the case enough so that the camera doesn't touch the surface the phone is placed on? I've seen many posts of people saying how they cracked the camera lenses after just putting the s6 on its back like on a table or something similar.
Thanks
ronnotronald said:
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Click to expand...
Click to collapse
You're right. I've sent them an email to find out.
ARRIVED!!
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
lucas.scott said:
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
Click to expand...
Click to collapse
Thanks for the pictures. It looks to be a little off around the bottom of the phone. Is it just the angle of the picture or is that the case?
I had purchased something like this for an iPhone 6 plus that I had and it just slightly didn't fit the phone. The cut out for the camera was off were it wouldn't sit flush with the back of the phone. I ended up just biting the bullet and paying the 50 odd bucks for the apple one. It would be nice if there was a decent quality real leather option, even if the price was higher. I guess we'll just have to wait and see. Again thanks for the picture.