Database Info

Wifi sniffer:

I know that the vox sort of can do this, but is there any other programs that is better than the integrated windows wifi util, as I think this stink?
Thanks.
/Sblop

re
Features:
* List view showing information such was WEP, SSID, MAC, signal strength(RSSI), latitude, longitude and location precision (HDOP)
* Radar view conveys distance to access points
* Save, load and merge XML files
* Export to Google Earth (KLM), text, Wi-scan, Tom Tom POI, MemoryMap and Netstumbler (ns1) formats
* Choose between Pocket PC 2003 toolbar or WM5 soft button look and feel
* Aggressive scanning mode to find even more access points
* New network found pop up blocker
* Supports all wired and bluetooth GPS devices that use the NMEA protocol
* Compatible with every WiFi card and Pocket PC device available (C-Guys SD card users need to use the NDIS compatible driver)
* Scan filters for WEP and ad hoc networks
Works like a charm on vox and its free for non commercial users
http://www.aspecto-software.com/rw/applications/wififofum/

great program. thank you, working great.

Thank you. :-D
This program is what I was looking for.
Tryed to connect my GPS and take a walk, and I found 40 networks in 30 mins. ;-)
Thank.

Can anyone say how to connect with gps ? I tought it whas GPS: COM4 and Baud Rate: 4800, i have now this settings buth i can not find my wifi point from home. And i see the orange led blink from the gps connection. Thnx for any help

[Q] Tasker: Best Method for Automatic HotSpot Activation

Hey Guys -
I've played with Tasker for a couple of months now and it's the #1 reason I like Android! I'm trying to set up a specific task and have many options as to how to go about it. I've tried a few things myself as you'll see below, but it doesn't always work well. Therefore, I wanted to post to see what the community suggested...
Goal
When at home or work, WiFi is On and Bluetooth is off
When not at home or work, HotSpot is On (Therefore also turning off WiFi) and Bluetooth is on
My Questions
1. Do you suggest I use Tasker's Location, AutoLocation's GeoFence, AutoLocation's Location, , AutoLocation's "Fuse", Near WiFi, a combination of these, or something else?
2. What's the best suggestion you have as to set this up to run as smoothly as possible? I'm concerned about battery, but would give it up if it meant it worked better.
Methods
I've come across a few different ways to do this. Below is what I've considered / tried so far:
- Location Based (Native Tasker)
- Location Based (AutoRemote)
This has GeoFencing and Location profiles. According to the app's FAQ, Geofencing is low power and uses cell + WiFi signals and Location uses GPS. It also says the can work together using "Fuse Location" but I cannot find that option
- WiFi Near (Native Tasker)
Note: I do keep the Location setting for Tasker set to "High Accuracy" in Android's settings
My Current Setup
Currently, I use Tasker's native Location but have found it doesn't work that well. Below's how I have it set up:
- Task: "Enable HotSpot"
- Enables Hotspot / Wait 3 Sec / Disable Bluetooth
- Task: "Disable Hotspot"
- Enables WiFi (Disabling Hotspot) / Enable Bluetooth
- Profile: Home - (Location)
- Task: "Disable Hotspot"
- Exit Task: "Enable HotSpot"
- Profile Work (Location)
- Task: "Disable Hotspot"
- Exit Task: "Enable HotSpot"
My Ideal Setup
I'd like to have it use one of the Locations OR well as WiFi near to trigger. Since you can't directly set an "OR" command in tasker, I am trying a workaround which does the following:
- Task: "Dummy"
- Wait 1ms
- Profile Home (Location)
- State: Location
- Task: Dummy
- Profile Work (Location)
- State: Location
- Task: Dummy
- Profile Near WiFi
- State: Near WiFI HOMESSID/WORKSSID
- Task: Dummy
- Task: "Disable HotSpot"
- Enables WiFi (Disabling Hotspot) / Enable Bluetooth
- Task: "Enable Hotspot"
- Wait 10 Seconds
- If %PACTIVE doesn't match *,Home (Location),*|*,Work (Location,*
- Enables HotSpot (Disables WiFi) / Disable Bluetooth
- End if
- Profile: Auto Hotspot
- State: Variable -> Variable Value: %PACTIVE Matches *,Home (Location),*|*,Work (Location,*
- Task: "Disable Hotspot"
- Exit Task: "Enable Hotspot"
All of the above basically because Tasker doesn't have an "OR" command.
So... what do you think? Have any suggestions? Thanks!

[App] CSNotifier 1.0

This application can show persistant notifications based on the next events:
- If mobile data may be in use
- if Wi-Fi is on but not connected
- if Ringer volume is zero
- if Bluetooth is on but not connected (possibility to exclude setected devices)
This is the Google play link:
https://play.google.com/store/apps/details?id=anddev.cs.csnotifier&hl=en
Permissions Explanation:
- View network connections (Needed for mobile data check).
- View Wi-Fi connections (Needed for Wi-Fi events check).
- Access Bluetooth settings (Needed for BT events check).
- Pair with Bluetooth devices (Needed for BT device selection).
- run at startup (Needed for starting app at boot time).

[SOLVED] Bluetooth pairing: missing code query

Hey guys,
I have a Bluetooth pairing problem with my car. My car was in a workshop and they disconnected the battery. After I get it back, I tried to reconnect the phone with the car and got the message "wrong PIN". I deleted the device and tried again, but I get the same error message without a PIN/code query. The connection with my Lumia 930 -> car working fine.
Is it possible to pairing manually (e.g. in a file that include uuid, name, code,...) or reset bluetooth?
Thanks a lot for your help,
Daniel
EDIT: I have connected a PS4 controller over Bluetooth and the pairing works correct for this device
EDIT2: Today I connected another Bluetooth device (BT speaker) again and the connection working fine. After a couple of hours I found a config (/data/misc/bluedroid/bt_config.conf) file that include
Code:
[Info]
FileSource = Empty
TimeCreated = 2018-01-07 15:14:28
[Adapter]
Address = 4c:74:03:df:f0:3c
LE_LOCAL_KEY_IRK = f65d6a2e87ffeb328f2a82ddffd877c3
LE_LOCAL_KEY_IR = 84ec4a284353ec7dd4adeabedf63fee3
LE_LOCAL_KEY_DHK = 1fcc619373fa6d15cf0d04c035a0e28c
LE_LOCAL_KEY_ER = 0a6b8b36db5bf28de89980573927fb4c
ScanMode = 0
DiscoveryTimeout = 120
Name = bqAquarisM5
[fc:70:5a:19:95:4f]
Timestamp = 1516727821
DevClass = 2360324
DevType = 1
AddrType = 0
Manufacturer = 10
LmpVer = 4
LmpSubVer = 4192
Name = BX-100
LinkKeyType = 4
PinLength = 0
LinkKey = 51a24d2784b68bc6949eb4887a3fb177
Service = 0000111e-0000-1000-8000-00805f9b34fb 0000110b-0000-1000-8000-00805f9b34fb 0000110e-0000-1000-8000-00805f9b34fb 00000000-0000-1000-8000-00805f9b34fb
Is it possible to add the necessary information manually?
EDIT: Solved! I don't know what the problem was, but I cleared cache and dalvik-cache, restored the privacy guard settings and reboot. Now it works!

Automatic back up solution to PC when on WIFI

Hey,
Can anyone recommend a back up solution that meets the following:
* Backs up to a computer via wifi
* Triggers only when on wifi, when I connect to Wifi
* Incremental back up / multiple versions
* Encrypts the back up as one file
Thanks,