Hi.....
I've just attempted to do the update via the moto tools update manager program and during installation my phone shown 'critical error' followed by 'coff' & 'CABE' on screen... the installation then failed and advised me to try again... Have tried three times now, does anyone have any ideas?
I'm back at work now and have left the phone at home so I cant supply many details right now..
I've been advised to try a master reset which I will try as soon as i'm home.
When I attempt to turn the phone on, it shows the boot loader menu and says 'something Failure'
Any help is much appreciated!
Well, you might try finding a 2.1 Milestone .sbf for your device and flash it with RSD Lite. Can you even boot into the recovery?
Hold camera button and power on. When you see the triangle screen hold volume up and then tap camera. (Just in case you didn't know)
Hey,
The device wont even boot into recovery mode so I don't think that idea would work
I would still try with RSD Lite. I had a problem similar to what you have, but luckily RSD Lite would still see phone and let me flash a .sbf of the Telus 2.1 I had.
When I plug the device into my machine though, it just flashes with low battery ect... its been on charge all night.
Broken said:
Well, you might try finding a 2.1 Milestone .sbf for your device and flash it with RSD Lite. Can you even boot into the recovery?
Hold camera button and power on. When you see the triangle screen hold volume up and then tap camera. (Just in case you didn't know)
Click to expand...
Click to collapse
I thought it was "D-Pad Up" to get to the Boot loader screen? From there, RSD should see it no prob. Then, you can either push a recovery image, or the fill 2.1 swf
Volume up works for me. D-pad also probably does the same...
Broken said:
Volume up works for me. D-pad also probably does the same...
Click to expand...
Click to collapse
as long as you can get into flash mode you should be ok,flash the sbf file like Broken said. Im not sure how to get into flash mode on the Milestone,but on the Cliq its the Menu Button+the Power Button. Do a google search for how to get into flash mode or maybe someone here will be able to tell you,the more difficult part is finding the original .SBF file for the Milestone. You have to use RSD Lite 4.5.7 or higher,dont use the Flash&BackUp program. once you get into flash mode RSD Lite should see your phone,and you shouldnt have any problems from there.
f he is lucky, just booting up to the error will allow RSD Lite to see the phone and allow flashing. As for the right .sbf should be easy. I can probably find it for him and point him to it if I new the locale of the phone, ie where it originated: Thai, Canada UK, Brazil, etc.
Related
Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.
It is same with me...
Diremaker35 said:
Well hello everyone to start off, i was trinketing around with rom manager and i think i flashed the original droid recovery and 2.5.0.1 into my phone on accident. now when i try to start the phone i get a white M and thats it tryed to boot into recovery only thing i can get to is the holding power and j and d down to get the usb flash init screen which is blue. can someone direct me in the ways of the force and help me bring this phone back to life or am i screwed? I have the j_rodd recovery image on the sdcard but adb wont pick it up as a device.
Click to expand...
Click to collapse
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....
CyanogenVietNam said:
I have problem with my Motorola MB300 ME600. when power even power + up OR power + down it only display and to M logo and make sound (has vib)... I can connect to fast boot even RSD. Help me! Plz....
Click to expand...
Click to collapse
firmware for your device.
You need to download these things...
RSD Lite 4.5.7
AT&T Stock Android 2.1 Blur v3.0.1390 - Original SBF by Skrilax_CZ @ ModMyMobile
And if you're doing this and haven't attempted root yet, or would just like to wipe your device through and through, HERE are the Moto USB drivers. Make sure to get the correct installer for x86 or x64.
Install your USB Drivers (if you haven't already)
Install RSD Lite
Turn off your backflip
Plug the USB cable into the phone and computer
Open the keyboard and press J+D+Power simultaneously and let up when you see the blue recovery screen with the black moto batwings. In the bottom left corner of the screen it will say in white letters "USB init mode"
Now when the phone boots to the recovery screen, Windows will begin installing a driver for the MSM720x flash recovery mode.
After the driver has successfully installed, open RSD Lite
Upon opening RSD Lite, you should notice ONE connected device in the table below. If not, post what you did exactly and we can help
Now that the device is showing in RSD Lite, click the "..." browse button to point to the Android 2.1 Blur 3.0.1390 image you downloaded earlier
Once that's selected, press start to start flashing your phone.... DO NOT UNPLUG UNTIL IT'S FINISHED.
Once finished, it will reboot itself and you should be presented with the Android Setup after a minute or two.
Does anyone have this problem? I`ve searched and cant find a solution.
I had sense rom on my phone then decided to go back to jboogie rom. I booted into stock recovery(power+vol down) and when i tried to tap bottom right of screen the screen wouldn`t respond so I couldn`t do a factory reset. I then tried volume up=power button to flash sbf through RSDlite. Nothing came on my phone screen telling me to attach usb, it juat stayed blank, although rsdlite said phone was connected so i started to flash sbf anyway. Then on the phone screen it said software update in progress, once it finished flashing, instead of saying rebooting phone on RSDlite it came up with "pass" and the phone wont boot or do anything at all now.
Sorry for long message, but hope someone can help.
Thanks
Mark
try to flash a stock rom sbf with rsdlite and after that, do a wipe in recovery mod. to enter recovery press power+ vol down, after the droid apears, push vol up+vol down. You have to see then the stock recovery menu. I did in the same way and is working. I think is now so easy to really brick this phone.
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
not even white led?
maybe your battery is 2low?
if u see the white led u can still go into bootloader and flash .sbf with rsd lite
Hi there,
I can't believe its dead!!
I have tried every rom available and tried out all the .sbf's too. A couple of times i thought i have bricked it but it was always done to user error (or a lack of understanding at times on my part). These Defy's seem to be almost bullet proof!
I had the "pass message" from RSDLite and all i had to do was flash the "2.2 bootonly" sbf to get past it. I have had corrupted boot loader messages and more but it just keeps coming back for more once things the right things are done in the right sequence.
Assuming your battery is ok, I would try installing one of the latest froyo .sbf's with RSDLite 3.9 only completion do a wipe from the stock recovery (hold pwr + vol down). Press vol up and vol down to activate the menu, select wipe with volume up or down, press power to go. The after rooting apply one of the excellent roms from Jboogie & Pays.
Good luck... sure it will be fine.
Andy
qpzmaluk said:
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
Click to expand...
Click to collapse
If you have only black screen, you have to flash the latest undowngradable rom you flashed, then you you finally get to moto logo, you will be able to go to recovery and wipe. After it it will boot just fine.
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
astearon said:
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
Click to expand...
Click to collapse
I had a similar thing when i flattened my battery half way through flashing an .sbf. I borrowed a friends battery, flashed the boot only and all was fine. There is a couple of pointers on the forum on how to charge your battery if you dont have a working rom (it wont charge without one! You have to get the motorola logo followed by the battery animation to charge your battery).
In your case im pretty certain you could have saved yourself the hassle of sending it off for service.
Andy
Thanks for all the replys, I have already had the dead battery a couple of weeks ago and "revived" it by putting the + and _ wires of usb cable into the battery of the defy, but this seems different, I cant get anything to work on it, no roms will flash and all I get is black screen. I do get the white led but only sometimes. It is very change indeed, I will try some of the solutions you guys said tomorrow and let yous know how I got on.
Thanks again
Mark
I did not want to risk charging out of wires, i have unlimited warranty on it after all so i gave it to service hoping a fix will be made by guys who know what they where doing (i hope).
In any case i see -qpzmaluk- tried off of wires and nothing happened.
I tried to flash again this morning using all the techniques above but I cant get rsdlite to recognise my phone either now. All i get is when connected to usb is the white led, nothing else happens when i try to go into recovery etc.
Mark
Huge thanks to EDITION I got my phone working again.
I did what he said about flashing last undowngradeable rom and surprisingly it came back to life. Brilliant mate, i cant thank you enough.
Mark
how did u do that? if u said your rsd lite cant recognize your phone?
I kept trying to connect to pc with usb and rsdlite eventually found it so I took the chance of flashing froyo 3.4.3-the one I last had on the phone, and surprisingly this time it went throughht to the end of booting the phone and now I have everything working again including stock recovery etc.
One thing to mention was that I couldn`t get into pwer+vol up or down before I flashed this time I flashed my phone. I just connected it to pc and luckily rsdlite recognised it this time and I just pressed flash button, then eventually phone booted up. So something was wrong and it didn`t flash it the normal way by going into stock recovery on phone but it worked
hi i am having really bad problems with my defy it is a great phone but when i got it it was on eclair 2.1, i wanted to update it so looked around and found a debranding kit that updates it to 2.2 only to find out that its not a officiall rom an now i cannot down grade iit back to 2.1 so i can root it an put a custom rom onto it i dont have the hold volume down option or tap bottom right of the screen, so any help would be very gratefull as just want to sort it out i have searched through xda an some links are not avail any more so i cant follow any guides proplerly i have found a proper nand back up if thats any good then let me know i just want to restore it first then go from there, thanks in advance
i also cannot do a factory reset either, i know there is someone out there that can help me so please come and help me restore my defy to life.
There is a volume key on the right side of your defy. Upper one is volume up and the lower one is volume down. Switch on your phone by pressing power button and volume down key together to enter recovery mode or power button and volume up key together to enter bootloader mode.
Download the official 2.2 for your phone, I beleive defy has 2.2 all over the world now, find the correct version for your Defy and download.
When you enter the recovery mode and see an Android with the exclamation mark, press both the volume keys together to enter recovery mode.
First do a facfory reset and clear cache in Recovery mode, then reboot and keep the volume up and power key pressed together. This will take you to bootloader mode, connect your phone via usb to your computer. Open rsdlite, see that your phone is detected. Browse to the 2.2 rom you downloaded and press "start".
^ this guy also forgot to mention, make sure you have the correct drivers for the defy and the correct version of rsdlite, also, make sure your battery is 50% or higher. The last thing you,would want to do is have to perform the mcguyver trick.................
Sent from my MB525 using Tapatalk
get the latest drivers and RSD lite, and make sure your sbf is a full sbf, and not a fixed sbf. full sbf is at least 160MB and above. i understand this is for blurless. for blur rom, could be up to 360MB
Hey Guys
i need your help
I tryed to flash a SbF on my phone, but at 100% my phone did an reboot an now it loops at the Bootlogo.
I can´t access the bootloader again
what should i do now?
ps: sorry for my bad english
Hi mate, can you give us a bit more details.
What was the sbf file you flashed? What was the name and version? Also make sure you got the correct file for droid global 2 and not for droid 2
Normal if fails, its best getting the old sbf file (303) and starting again.
i used the 2.2.2 Service Version (DE,ATCH)
and-developers[dot]com/sbf:milestone2
The Problem is can´t access to my bootloader or to the Clockworkrecovery
no idea what i can do???
please!!!
or do you know what would happen, if i would use my Guarantee?
you cant use your warranty if you've played with.
If you are very sure you are using a droid 2 global and you've flashed a milestone 2 sbf file then this is your problem, these phones are not the same build and you cant use the roms and sbf files, you will need to file sbf file for droid 2 global, follow this link and download the rar file (http://modmymobile.com/forums/649-m...re-vrz_a956_2-4-33_1ff_01-droid-2-golbal.html), flash this file (using rdslite 4.9) and then if you want to use a new rom you can, if you want to flash a ginger bread rom (http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html)
, then follow this guide first (i did) and all works fine, im now using the venus rom (http://forum.xda-developers.com/showthread.php?t=1259807) after i did the gingerbread up date. If you need anymore help, either pm me and post another reply.
kurpter said:
you cant use your warranty if you've played with.
If you are very sure you are using a droid 2 global and you've flashed a milestone 2 sbf file then this is your problem, these phones are not the same build and you cant use the roms and sbf files, you will need to file sbf file for droid 2 global, follow this link and download the rar file (http://modmymobile.com/forums/649-m...re-vrz_a956_2-4-33_1ff_01-droid-2-golbal.html), flash this file (using rdslite 4.9) and then if you want to use a new rom you can, if you want to flash a ginger bread rom (http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html)
, then follow this guide first (i did) and all works fine, im now using the venus rom (http://forum.xda-developers.com/showthread.php?t=1259807) after i did the gingerbread up date. If you need anymore help, either pm me and post another reply.
Click to expand...
Click to collapse
thank you for your answer
My Problem is that rdslite or adb devices can´t see my phone, because i stuck in the bootlogo screen.
I can not enter my bootloader or clockwork recovery.
hi mate,
to put your phone in boot loader mode.
turn off the phone, press and hold the up and down volume buttons together (make sure you are pressing and holding them down together keep them hold down and dont let go) press the power button while still holding the volume buttons and wait till bootloader comes and then let go
you are in bootloader mode
now Launch RSDLite
Select SBF
Start
oh thanks this button combination works!
Is it normal that rsdlite runs for 1 hour?
Once it gets to 100% , pull it out and restart the phone (it should reboot it normally but I find it doesn't always do it) so either unplug and let it reboot or pull the battery out and reboot, fingers crossed it will boot in to stock and then you can upgrade from there.
Did you get it working mate?
nope dude
i tryed many different SBF files, but not a single one worked?!
Is there an alternative?
Is there an option to get from my bootloader to my recoverymode?
because i want to try adb recovery?
thanks for your help bro!
Ok, here's 2 things you can try, the 2nd option will work though.
To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode.
If you can't get any thing to load, do this one, but this will put you on stock gingerbread.
Take your sd card out of the phone and download the Full Stock Version (Signed) file from here = http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html
Make sure you download the signed version.
Then copy the update.zip file and place on root of sdcard. (Rename anyother file called update.zip before this or back it up)
reboot phone into recovery (X + power key, like we did before)
Then select install update.zip this will install, will take about 10mins to install but then another 15mins on first boot.
Let me know how you get on
kurpter said:
Ok, here's 2 things you can try, the 2nd option will work though.
To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode....
Click to expand...
Click to collapse
I see the yellow "!" but i can´t enter the recovery mode
Ah ok, Your Phone reflashed the Stock Recovery back onto your Phone! (so sorry, you dont have clockmod on anymore, so your going to have to use option 2, but to get in to the stock recovery after the yellow '!' you must hold the Volume "UP" key and hit "camera to access the ORIGINAL recovery options
YEAH this works!
thank you very much
no problem mate, im here top help.
once you've got yourself on to stock 2.3, you can install z4root and Droid 2 Recovery Bootstrap v1.0.0.3, (you can get thiese 2 things from here = http://www.mediafire.com/?t7k4nu87lpuho
these 2 will root your phone again and allow you to go in to recover mode again, make sure you install clockwork again and then you can install new roms on your phone, i recommend this rom if you dont want a motorola rom (non blur version)
http://forum.xda-developers.com/showthread.php?t=1259807
kurpter said:
Ah ok, Your Phone reflashed the Stock Recovery back onto your Phone! (so sorry, you dont have clockmod on anymore, so your going to have to use option 2, but to get in to the stock recovery after the yellow '!' you must hold the Volume "UP" key and hit "camera to access the ORIGINAL recovery options
Click to expand...
Click to collapse
I had the same problem and tried the same thing but when I get to the yellow "!", and press VOL up and the camera button nothing happens
Having problems was trying to re vert back to stock SBF failed now bootloader says code corrupt battery low cannot program. Can I just plug it in the charger for a bit then try again?
Sent from my Gummy Charged GBE 2.0 using xda premium
Did you try the other way? "To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode."
kurpter said:
Did you try the other way? "To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode."
Click to expand...
Click to collapse
Yes I tried that it is stuck in boot-loader mode & it wont charge at all.
Hoping someone here may have some ideas. ..
Picked up a couple Global's the other day on eBay. Two of the three work great. Was able to get them unlocked, rooted, and band unlocked. They are working great on T-mobile! The issue I'm having is with the third one. When I enter the bootloader, I get nothing but a black backlit screen with no writing. When I attempt to use RSD Lite, I can't get it to recognize the phone at all.
So next I tried booting the phone normally, and then hooking it to the PC. RSD Lite does recognize it that way. When I begin the flash process, the phone attempts to reboot into flash mode, screen goes black, same backlit screen with no writing. I would like to point out that I am doing all this with a 5-wire factory cable, so none of the usual button combo mistakes, undercharged battery issues, etc. apply here. If you have on of these, you don't need a battery in the phone at all. With and without battery, with and without factory cable...hasn't mattered, no bootloader no matter what. The issue is that the bootloader acts as if it just isn't even on the phone. I know there are several ways to reload that consumer replacement to a droid 1, but I haven't found anything for a 2. The other thing limiting what I am able to do is that the phone is running .629, which means no root or CWM, so those couple tricks are out the window at this point also, and because of the bootloader issue I am unable to downgrade using RSD Lite or any of the bootable CD options that usually work for phone stuck on .629.
So at this point I'm figuring the phone is just stuck the way it is, but I thought I'd throw it out there and see if any of you guys had any similar experiences. Thanks
strabo231 said:
Hoping someone here may have some ideas. ..
Picked up a couple Global's the other day on eBay. Two of the three work great. Was able to get them unlocked, rooted, and band unlocked. They are working great on T-mobile! The issue I'm having is with the third one. When I enter the bootloader, I get nothing but a black backlit screen with no writing. When I attempt to use RSD Lite, I can't get it to recognize the phone at all.
So next I tried booting the phone normally, and then hooking it to the PC. RSD Lite does recognize it that way. When I begin the flash process, the phone attempts to reboot into flash mode, screen goes black, same backlit screen with no writing. I would like to point out that I am doing all this with a 5-wire factory cable, so none of the usual button combo mistakes, undercharged battery issues, etc. apply here. If you have on of these, you don't need a battery in the phone at all. With and without battery, with and without factory cable...hasn't mattered, no bootloader no matter what. The issue is that the bootloader acts as if it just isn't even on the phone. I know there are several ways to reload that consumer replacement to a droid 1, but I haven't found anything for a 2.
Click to expand...
Click to collapse
maybe bricked, could try manually installing update.zip from android recovery, if you can get to that
How to enter Android system recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running froyo/2.4.x firmware. For gingerbread/4.5.x firmware, press Volume Up and Down buttons.
and be sure you are using
How to Enter Bootloader: (used to flash .sbf recovery images)
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
The other thing limiting what I am able to do is that the phone is running .629, which means no root or CWM, so those couple tricks are out the window at this point also, and because of the bootloader issue I am unable to downgrade using RSD Lite or any of the bootable CD options that usually work for phone stuck on .629.
Click to expand...
Click to collapse
.629 has been rootable since 16 April 2012
just use ezSBF & Root 2.3.4/ 4.5.629
So at this point I'm figuring the phone is just stuck the way it is, but I thought I'd throw it out there and see if any of you guys had any similar experiences. Thanks
Click to expand...
Click to collapse
sd_shadow said:
maybe bricked, could try manually installing update.zip from android recovery, if you can get to that
How to enter Android system recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running froyo/2.4.x firmware. For gingerbread/4.5.x firmware, press Volume Up and Down buttons.
and be sure you are using
How to Enter Bootloader: (used to flash .sbf recovery images)
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
.629 has been rootable since 16 April 2012
just use ezSBF & Root 2.3.4/ 4.5.629
Click to expand...
Click to collapse
Ah Shadow! I was hoping you'd see this. Let me clarify a little bit.
1. I am able to get phone to boot into OS. I did try to install the update.zip already but I'm still having the same problem with the boot loader.
2. I know about the easy sbf, and tried that with this particular phone, but because of the problem with the boot loader when easy sbf or RSD Lite switch the phone, or attempt to switch into flash mode, the computer no longer recognizes the phone.
3. I did think about rooting the phone to try to open up a few other options to at least get around the problem. Since it's on .629 already though I'm limited to rooting using easy sbf as far as I've understood, but again since I'm having the issue with the boot loader that hasn't been an option I have been able to successfully use.
4. The power button on the phone isn't working, so I'm unable to use the key combo to access the boot loader; however, I have a factory cable...now I say factory cable not meaning the stock charging cable...but the 5-wire factory cable. Typically with Motorola phones using this cable you simply remove the battery, and then with no battery in the phone hold down both volume buttons and plug the factory cable in and it automatically reverts to the boot loader.
I know that there is a consumer replacement boot loader for the droid 1 to fix issues like this, but I haven't seen one for the two. The other issue is that the replacement is an sbf file which ill be unable to use, and didn't know if that was something that would exist as an update.zip that could be flashed through the stock recovery
don't need power button
with phone off, hold up arrow and connect usb cable
should boot directly to bootloader
sd_shadow said:
don't need power button
with phone off, hold up arrow and connect usb cable
should boot directly to bootloader
Click to expand...
Click to collapse
yeah we're on the same page there. When I do that, instead of getting the bootloader like I normally would, I'm just getting a blank black backlit screen, like the boot loader isn't there. Instead of getting bootlader D0.11 ect, It's just a blank screen. It doesn't matter which method I use to access it, both volume buttons and usb, up arrow and usb, whether there is a battery in the phone or not, I'm still getting the same result. If I boot the phone normally, and then try to let RSD switch it for me, it does it, and then I get the same black screen and the flash mode failure error. Like I said there is a consumer replacement bootloader for the 1 that I've been able to use to fix this problem in the past, but if one exists for the two I haven't been able to locate it. So at this point I have a working OS, a working stock recovery, and no boot loader
think there was a 608 bootloader file, can't remember where i saw it
but it didnt work on 629 anyways
you might be able to root with http://forum.xda-developers.com/showthread.php?p=37438602
Root Droid 2 on Gingerbread 2.3.4 [WINDOWS]
i havent got it to work, but it only takes a few mins to download and run
Sent from my XT862 using xda premium
sd_shadow said:
think there was a 608 bootloader file, can't remember where i saw it
but it didnt work on 629 anyways
you might be able to root with http://forum.xda-developers.com/showthread.php?p=37438602
Root Droid 2 on Gingerbread 2.3.4 [WINDOWS]
i havent got it to work, but it only takes a few mins to download and run
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
Yeah I tried that last night. I saw where you were having problems with it too. I had seen where a few months back there was someone else that was having this issue that you were trying to help walk them through, but the thread kinda died off, so I wasn't sure if there was ever a resolution to it. Ok well thanks for your time. I'll be sure to post an update for people coming behind me if I manage to get anywhere with it.
strabo231 said:
yeah we're on the same page there. When I do that, instead of getting the bootloader like I normally would, I'm just getting a blank black backlit screen, like the boot loader isn't there. Instead of getting bootlader D0.11 ect, It's just a blank screen. It doesn't matter which method I use to access it, both volume buttons and usb, up arrow and usb, whether there is a battery in the phone or not, I'm still getting the same result. If I boot the phone normally, and then try to let RSD switch it for me, it does it, and then I get the same black screen and the flash mode failure error. Like I said there is a consumer replacement bootloader for the 1 that I've been able to use to fix this problem in the past, but if one exists for the two I haven't been able to locate it. So at this point I have a working OS, a working stock recovery, and no boot loader
Click to expand...
Click to collapse
if you are still working on this a Bootloader Only
HS_S_signed_AP_BL_D11_cdma_droid2we_Consumer_replacer.zip
has been posted here http://sbf.droid-developers.org/cdma_droid2/list.php
If you're still looking to root, try Framaroot from here. It worked for me on .629. No idea about the bootloader however . Good luck though!