Hey,
Not sure if this is the correct place to post this so i will give it a go anyway
Was messing arround with cht and it told me to restart my hd2 for changes to take effect, i did and now my device wont load past the 02 boot screen.
Any ideas would be much appreciated.
Cheers
Take a hard reset!
hard reset
Is that by pressing and holding the red button on the back of the phone?
If so tried that the phone went off and came back on and still didnt load past the screen
No. .. this is what you quoted Softreset, would be in this link: HTC HD2 hard reset
HTC HD2 hard reset
If a normal reset does not solve a system problem, you can perform a factory reset. After a factory reset, the phone is restored to its default settings—the way it was when you first purchased it and turned it on. You will lose any programs you installed, data you entered, and settings you customized on your phone, and only Windows Mobile software and other pre-installed programs will remain.
There are two ways to do a factory reset. One way is perform a clear storage process through the phone settings. The other way is to perform a hard reset by pressing certain buttons on your phone, in cases when you are unable to start up your phone and enter the phone settings.
Warning! Your phone will be set back to factory default settings. Make sure that any additional installed programs and important data on your phone have been backed up before you perform a factory reset.
Important If Encrypt files when placed on a storage card is enabled, back up all files from the storage card before performing a factory reset (Clear Storage or hard reset) or updating the operating system. Otherwise, you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
To perform a HTC HD2 Leo hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
To perform a clear storage
1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.
Click to expand...
Click to collapse
In your case, will be the first because you do not enter the WM!
Thank you !
Wonderful seems fine now thank you very very very much !!!
boysee87 said:
Wonderful seems fine now thank you very very very much !!!
Click to expand...
Click to collapse
For nothing. Now check what probably caused the crash because the CHTEditor only do that if any tampering in manilla
..
is there anywhere to check error reports ?
boysee87 said:
is there anywhere to check error reports ?
Click to expand...
Click to collapse
No. .. It is not in this version are you using currently testing a newer version that can do it!.
...
look forward to it, cheers for your time mate !
Related
I have XDA orbit 2 that will not get past teh windows splash scree.
What buttons are hard reset.
Tha manual says IE and GPS/Messaging and stylus
Which buttons are the IE and GPS
Thanks
Steve
The bottom two spft buttons on the left image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its the "windows" and "OK" buttons on the bottom row for the Orbit 2.
Nogs
nogs said:
Its the "windows" and "OK" buttons on the bottom row for the Orbit 2.
Nogs
Click to expand...
Click to collapse
neither of the 2 suggestions above work.
O2 say the Comm Manager button and the Voice Dial button.
What is the Comm Manager button?
Steve
Are you following this process exactly?
1.Press and hold the GPS/MESSAGING and INTERNET EXPLORER
buttons, and at the same time, use the stylus to press the RESET
button at the bottom of your device.
2. Release the RESET button, but
continue pressing the GPS/
MESSAGING and INTERNET
EXPLORER buttons until you
see this message on the
screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press Send to restore
manufacturer default, or
press other keys to cancel.
Click to expand...
Click to collapse
3. Release the buttons, and then press SEND on your device to perform
the hard reset, or press any other button to cancel the reset.
DaveShaw thanks for putting it simple
I am still having a problem with doing a hard reset. I am holding down the ok and the windows buttons and they are not showing me the message. Just getting the password is not correct please put in the following code and not able to use the touch screen may cause a problem?
Hard Reset:
On the 02 Orbit2, make sure the phone is powered on and then press AND HOLD the Windows and OK buttons down at the same time, THEN use your stylus to press AND RELEASE the reset button (while you CONTINUE to hold down the Windows and OK buttons). You should get a grey-ish/white screen explaining how to complete the hard reset or how to cancel the operation.
If you cannot see anything on your screen due to the OS being totally messed up (in other words, as long as it's not hardware failure), then you need to put your device into bootloader mode (4-color screen) so that you can flash the ROM (either what you already are using, or a newly cooked one - either way you need to have a ROM image file on your computer to complete the flashing process).
Bootloader Mode:
To enter bootloader mode, press AND HOLD the camera button and then press AND RELEASE the soft reset with your stylus. When the screen is showing the 4 color bands, plug in the USB cable between your computer and phone flash the ROM.
coldfussion said:
I am still having a problem with doing a hard reset. I am holding down the ok and the windows buttons and they are not showing me the message. Just getting the password is not correct please put in the following code and not able to use the touch screen may cause a problem?
Click to expand...
Click to collapse
very simple only two soft key soft reset ok
where is gps butten i cant find it??????//
well wisher said:
where is gps butten i cant find it??????//
Click to expand...
Click to collapse
GPS button is the same as the message button ! like the picture I attach this
Does anyone know if there is a software soft reset button for the HD2?
Can't get the Slide2Shutdown program to work, and I used that with my X1 to soft reset.
Not that I need it much, but it's nice to have after installing or uninstalling a program.
Try TouchOff. It works on my HD2
XDA Shutdown.
I actually installed the 12 button action screen on my Leo and create a shortcut on programs folder.
Then add the icon in the quick launch programs tab in the HTC sense and run it.
Running great so far.
here's a simple softreset app
drop the exe in /windows
and the link in /windows/startmenu/programs
tnyynt said:
XDA Shutdown.
Click to expand...
Click to collapse
fards said:
here's a simple softreset app
drop the exe in /windows
and the link in /windows/startmenu/programs
Click to expand...
Click to collapse
Thanks guys.
The little red button next the microsd slot, you need to remove the battery cover, it's explain in the manual
He's looking for a software soft Reset
There's one in the Sense 2.5 tweaks and mods, stuck at the top of this very forum.
http://forum.xda-developers.com/showthread.php?t=584415
You need "Touch X reset and wifi". It creates 2 shortcuts in your start menu. 1 toggles WiFi on and off, and the other performs a soft reset. I've got them both in my quick links on the home page.
I prefer something called Power Options (here on xda)
the icons aren't that beautiful, but it does what its supposed to
http://forum.xda-developers.com/showthread.php?t=544475
DocteurN said:
He's looking for a software soft Reset
Click to expand...
Click to collapse
Ok sorry but why "software reset button" ?
Is it possible to ad a "soft reset" option when u hold End Key? Or if i install some of the shutdown apps, is it possible to assign that to endkey and deactivate the orginal popuplist?
I want to softreset without clicking on a shortcut
If HTC hides the softreset button under the shell, why don't they ad a function in Windows !
mrfredde said:
Is it possible to ad a "soft reset" option when u hold End Key? Or if i install some of the shutdown apps, is it possible to assign that to endkey and deactivate the orginal popuplist?
Click to expand...
Click to collapse
the XDA shut down app posted earlier should do that. but i didnt try it though.
my device keeps hanging and im forced to open the cover these few days....arrrgh im going to need to drill a hole through that darned cover
So now I know how to software soft reset as well as soft reset. All I need now is to know what both of them do . What on earth is the difference?
Guys, what is the difference between the two resets please?
rphillip said:
So now I know how to software soft reset as well as soft reset. All I need now is to know what both of them do . What on earth is the difference?
Click to expand...
Click to collapse
The difference is in the name.
Soft reset is done by pressing the red button inside the back.
Software soft reset is a software option that does the same, like the reset shortcut in the tweaks sticky post.
Hello,
I use MySoftReset No Warning from this thread, Would it be possible to place in the quicklist from the HD2 as on my picture. That would be very useful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Braakie said:
Hello,
I use MySoftReset No Warning from this thread, Would it be possible to place in the quicklist from the HD2 as on my picture. That would be very useful.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=600302
Simple shortcut to softreset
http://hd2sr.jdbp.mobi
Post #17
That will be nice!
Hi I accidentaly stumbled upon a "Safe Mode" on the HTC Sensation.
It adds a text box that says "safe mode" in to the left bottom corner, havent figured out yet what it really does. exept this.
I accidentaly held the volume up rocker pressed down after the HTC logo screen on boot up and this is what i got.
Does anyone know what it is for?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can I enter safe mode?
In order to enter safe mode, please turn off the phone. Then briefly press the Power button to turn on the phone. While the phone powers on, press and hold the Volume down button until phone loads the OS and "Safe Mode" should appear on the lower left part of the screen
NOTE 1: If the process does not allow you to enter safe mode, kindly remove the back cover, remove the battery and then place it back in.
NOTE 2: Safe mode is a way wherein you can view built-in applications without hard-resetting the phone.
sts_fin said:
How can I enter safe mode?
In order to enter safe mode, please turn off the phone. Then briefly press the Power button to turn on the phone. While the phone powers on, press and hold the Volume down button until phone loads the OS and "Safe Mode" should appear on the lower left part of the screen
NOTE 1: If the process does not allow you to enter safe mode, kindly remove the back cover, remove the battery and then place it back in.
NOTE 2: Safe mode is a way wherein you can view built-in applications without hard-resetting the phone.
Click to expand...
Click to collapse
http://www.htc.com/sea/faqs.aspx?p_id=399&cat=5526&id=169050
I still don't really get the point of this functionality...
Haha i understand why the stupid Windoze has it - cause its a stupid OS. But why on earth did they put safe mode on android????
Maybe it has something to do with the contract that htc has with microsoft about the "flagship phones must come out with windows os first"..
Hmmm maybe we are running Sense windows and not android... Thats why they locked the bootloader, so we will never find out by trying to install Android...
Wouldnt that be weird haha.
P.s. - im joking.
Sent from my HTC Sensation 4G using Tapatalk
This mode is in case you have some problems with your downloaded apps that prevent phone from functioning normally. From here, phone only loads OS and apps that were pre-installed form the factory so you can un-install troubled items and/or use your phone without doing full factory reset.
my sensation stuck in safe mode...
try 1, 2 , 3 ROMS and its the same thing...
It is that the ROMs is not suported for my device!?
Any ideas?
Regards
Boy, I've read a ton about this issue and no one seems to be able to solve this exact problem.
Got my hands on an HTC 8X which, if left to run normally, just hangs on the at&t logo screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And before you say anything, no, the hard reset doesn't work, because using the initial volume down/power procedure reboots the phone...the hard reset must be done from "off," not reboot. Plus, if the battery runs out entirely, the device will just enter the reboot cycle again when recharged. Just like the issue discussed here -> http://www.brighthand.com/default.asp?newsID=19892&news=windows+phone+8+bricked+htc+8x+nokia+lumia+920+microsoft+bricking
Now, I can reliably get the device to either the "flash settings" static screen, like this, almost every time I try doing volume up keypresses from boot:
...OR I can get it to the root system info screen, like this, almost every time I do some multiple volume down keypresses interspersed with an up keypress at boot, while connected to my computer via USB [if I disconnect, the screen changes to "serial"]:
However, I can't figure out how to bring it back from the dead.
Note that I am not a ROM cook and don't even own a Y-cable, so be gentle if you're going to talk about anything along those lines. However, any advice that isn't related to the hard reset? If so, thanks. If not, at least I've documented this specific "semi-bricked" state on here.
I know you don't want any advice related to the hard-reset method, but I am curious if you tried the following:
1. Run the phone down until the batter is 100% dead. (unresponsive when you hit the power switch.
2. While plugging in the power cable, press and hold the POWER and VOLUME DOWN buttons, Release them when you see an icon on the screen.
3. Then press the following hardware buttons in this sequence: VOLUME UP > VOLUME DOWN > POWER > VOLUME DOWN.
Let me know how you make out.
compu829 said:
I know you don't want any advice related to the hard-reset method, but I am curious if you tried the following:
1. Run the phone down until the batter is 100% dead. (unresponsive when you hit the power switch.
2. While plugging in the power cable, press and hold the POWER and VOLUME DOWN buttons, Release them when you see an icon on the screen.
3. Then press the following hardware buttons in this sequence: VOLUME UP > VOLUME DOWN > POWER > VOLUME DOWN.
Let me know how you make out.
Click to expand...
Click to collapse
Yep, I absolutely did that, but thanks. Did not work. Would only reboot the phone and lock it on the at&t screen again.
Sounds like no one can help here.
Without an At&t stock ROM, it will be tough to fix this.
What did you end up doing with your phone? Any luck?
Got the same problem on my HTC 8X AT&T. Got a RMA setup with HTC. What did you do?
hello xda members,
I have Leagoo T5c . problem; one morning it shows errors that home screen and some other google service not responding. i restarted phone. and now it shows ' powered by android' till battery drain. hard reset not working (i cant get to it). when i trying to connect to laptop device manager shows unknown device for few sec, after hard reset combination.
I tried to contact seller and manufacturer I used jut month after buying. what would be suggestion if they don't help? re flash? I would need link or instruction, because i haven't done it before.
mobremontas said:
hello xda members,
I have Leagoo T5c . problem; one morning it shows errors that home screen and some other google service not responding. i restarted phone. and now it shows ' powered by android' till battery drain. hard reset not working (i cant get to it). when i trying to connect to laptop device manager shows unknown device for few sec, after hard reset combination.
I tried to contact seller and manufacturer I used jut month after buying. what would be suggestion if they don't help? re flash? I would need link or instruction, because i haven't done it before.
Click to expand...
Click to collapse
hello,
less help form manufacturer, the same what you can find on web.
Problem: I try to reflash software with Upgrade Download, but on 42 sec. (register reading) it stops. any suggestions
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what's up your t5c now ?
Hello,sorry but that's my 1st time in a forum,and i hope to write in the right place... Ok,listen please, i try a disaster! In a moment of confusion and disattention I’ll wipe all sistem with twrp,and i repeat WIPED All Sistem. I never had do Nand backup. Now, phone is always started in 1st start sreen with only Android word on screen. It doesn’t shut down and if i try to push off,in some secons it restart. I have a leagoo t5c. With pc i’d downloading every drivers and firmware,but pc doesnt see phone,or if it do that,spd can’t install firmware. Can you teach me,if there’s a metod,to reinstall all system if it is possible with Windows 10. Thank’s for attention, have a nice day to everybody!
I don't know if you finally got to salvage your T5c, but in order for the flashing app to recognize your phone, you must leave it turned off, THEN plug it into a USB port on your PC, THEN press the Power button AND Volume Up button AND Volume Down button at the same time.
You wait a few seconds, and you should see the phone appear in the flashing app main window with the word "Ready" in the lower left corner. Then you can click on the Download button in the top menu bar, and wait until you see a green "Passed" mention. Then you can unplug your phone and either configure it as a new device (that's what I do) or restore content from a backup.