Good day everyone!
I have an HTC Eris clone that is running on windows mobile 6.5, its hardware is much more alike with the real HTC Eris. Could you folks give me some links where to get an Android rom that can be installed in an SD for me? I've tried some roms posted in here using Haret but no success at all.
Here is the specs of the Phone:
Model No.: NEXPERIA SY.SOL 5209
CPU: Qualcomm MSM7600 (582MHz)
RAM: 288MB
Flash Size: 256MB
Data Bus: 32 Bit
Storage Size: 145.86MB
Display Resolution: 320x480
Colors: 65536
Attached also are some logs from haret
Your help would be much appreciated.
Related
DEAR FRIENDS,
I am using o2 IIi windows mobile 2003SE, and i want to upgrade it to windows mobile 5, please suggest me how it is possible?
My Pocket pc's full details:
ROM VERSION: 1.11.00WWE
ROM DATE: 01/27/05
RADIO VERSION:1.00.00
PROTOCOL VERSION: 1337.39
ExtROM VERSION: 1.11.923WWE
CPU: Intel(R) PXA272
Speed: 520 MHZ
RAM SIZE: 128 MB
FLASH SIZE: 64 MB
FLASH CHIP TYPE: 28F256L18
DATA BUS: 32 bits
Storage size: 59.68 MB
LCD: 240x320 TFT
Colors: 65536
MOdel NO: PH10C
Platform: PocketPc
IMEI: 3549***********
this is the forum for your device
http://forum.xda-developers.com/forumdisplay.php?f=287
you should prob read the top sticky thread
hello dear forum users.
Today someone gave me a present! A HTC Touch Cruise!
i never had a windows mobile phone! that means that i'm a beginner in this domain !
i tried to enable my touchflo but in "Today" it doesn't appear
the ROM version is: 3.13.405.0 WWE
ROM date: 08/21/08
Radio version: 1.59.42.15
Protocol version: 25.85.30.07H
Hardware:
CPU: QUALCOMM(R) 7200
Speed: 400 Mhz
RAM size: 128 MB
Flash size: 256 MB
Data bus"32 bits
Storage size: 103.30 MB
Display resolution 240 x 320
Identity:
Model No.: Polaris
Platform: PocketPC
-------------------------------------------------------------------------
i tried to install a new version of touchflo 3d, with 3d drivers but i have the same problem and also i don't know how to apply a touchflo theme! can someone help me with a new ROM, with WM6.5 !
pleaseee heeellp !
Hi all...
i have T-Mobile HTC Touch (WM 6.1)
ROM Version: kwbr rom v4.5.3 WWE
ROM Date: 10/28/08
Radio Version: 03.12.90
Protocol Version: 4.1.13.56
===================
CPU: OMAP850
Speed: 201 MHZ
RAM Size: 64 MB
Flash Size: 128 MB
Data Bus: 16 bits
Storage Size: 51.95 MB
Display Res: 240x320
BT Ver: 2.0
===================
Model Number : ELF0100
i have it recently, and it's my first time using a Windows Mobile Phone,
so i don't know much..
- i just want it to upgraded/updating to latest version, in other word, becomes better.
- Can I install WM 6.5 on it ?
- can i upgrade the ram ? (like an PC, upgrading to 128 MB)
- can i upgrade the CPU ?
- what's the benefits and downsides to upgrading ROM or flashing (like what i read in web)..
thank you in advance....
no help here ????
is it really no one can help me ???? or is it no one want to help me ?
Hello, I have a chinese HTC HD Clone, of course with very few features from the original.
It has no gsensor (no sensor at all)
These is the hardware specs:
Processor: Marvell PXA310
Memory: 85.30 MB
RAM Size:192 MB
Flash Size: 256 Mb
Screen Resolution: 240*400
Color: 65536
ID Module: NEXPERIA SY.SOL 5209
Platform: Pocket PC
Rom Version: 01.001.1 CHS
Im running WM 6.5 ROM, (t5355,5353 chinese clones
http://forum.xda-developers.com/showthread.php?t=618132&page=2)
But I want to try flashing it...
I like this:
EnergyROM
http://forum.xda-developers.com/showthread.php?t=536751
The matter is... any body know if will it works? If not... wich is the recomendalbe ROM???
Thanks in advance
I'm realy tired about my ROM...
Hi guys. First of all, sorry for my english, I will do my better to be understandable. In second, I hope that is the right section for my question.
My father owns a SAIET ST-S350 that have a tons of problem (IMEI lost and malwares over all). I tried with factory reset, but problem remains. So, I've looked for a new rom, but sadly seems that nobody knows that phone.
I've found the specifications with phone Tester:
DEVICE
BRAND: alps
MODEL: ST-S350
DEVICE: yl_p6
CPU: ARMv7 Processor rev 3 (v7I)
CPU-ABI: armeabi-v7a
RAM: 465MB
OS
VERSION: JDQ39
RELEASE: 4.2.2
KERNEL: 3.4.5
SDK:17
FIRMWARE: eng.alex.1416208770
DISPLAY
DIMENSIONS: 960X640
SIZE: 7,22'' aprox
DENSITY: Extra-high (320 dpi)
LOGICAL DENSITY: 2.0
DPI X: 159.37254
DPI Y: 160.42105
There is a compatible rom that I can use with this phone? I know that it doesn't deserves the time spent, but it is a IP67 device and sometimes is very useful.
Thanks to all