Related
So i'm trying to install the cupcake build and i'm having difficulties in the terminal. chmod takes but when I try and execute the next command, like shown below, I get the following error. I have installed fastboot, hard spl and the modded jf1.42.
Macintosh:cupcake josephaaronmoody$ chmod a+x fastboot
Macintosh:cupcake josephaaronmoody$ ./fastboot flash system system.img
-bash: ./fastboot: cannot execute binary file.
plz help! [email protected]
I hate to think I could be liable for you bricking your phone, but as far as I know the ./ in front of fastboot shouldn't be there, and the command should just start with fastboot. I haven't installed cupcake but when I have used fastboot, commands have never start with "./"
What? ./ is how you launch binaries in linux (or osx). It looks like you might be using the linux binary and not the osx one.
try fastboot-osx-10_5.zip from http://forum.xda-developers.com/showthread.php?t=456071
thanks
That's the one I dl'ed but the instructions on the koush page are the one's i'm following. that's where I got the commands.
I was reading the threads in the dream forum and found his progress and instructions. I added them to my wiki so they can be continually edited and updated as new methods are found. I did not have any part in this but I noticed that there was not a formal post here about it yet so I decided to make one.
http://android-dls.com/wiki/index.php?title=Magic_Rooting
Please feel free to thank him with some nesquik if you find this helpful!
I was pasting the new instructions here every time they changed but they seem to change often. Please visit the above url to see the current instructions. They were placed on the the wiki so anyone could make edits and changes to them, which is useless if this post needs to be updated each time. I wish vbulletin had some sort of wiki quote that could auto read that page and insert it here for me
Great!
If would be great if this post were a sticky. It also would be nice it the post was updated to include the instructions here as well.
Thanks,
Anders
Just quoting the solution here..
First of all, everyone owes Haykuro a great big thanks for working on this and helping create the solution without even owning a magic. The following is his method just reworded slightly.
1. To gain root access on your HTC Magic/Sapphire you will need to download the magic-root-boot.img zip file and unzip it so that you have boot-new.img in a location you can find.
2. On your device, enter the bootloader by trying one of the following
* Turn off your device and while it is off hold down home while you press power.
* Turn off your device and while it is off hold down volume down while pressing power
3. Make sure your usb cable is inserted and you have Fastboot installed and ready to use.
4. Type the following commands on your desktop (not on the device):
Code:
fastboot boot boot-new.img
5. wait for the following to flash and the phone to reboot:
Code:
downloading 'boot-new.img'... OKAY
Code:
booting... OKAY
6. make sure you have ADB installed and run the following commands from your desktop (not on the device):
Code:
adb push boot-new.img /sdcard/boot-new.img
Code:
adb shell flash_image boot /sdcard/boot-new.img
anyone tried this?
I was going to post the actual text here but the reason for doing it in the wiki is because the methods seem to change very often (the g1 method changed almost daily for a while). I would still recommend viewing the instructions on the wiki before performing the method to be sure they are the same at the time of use.
Full procedure so far!
1. Download boot-new.img.zip from http://www.droiddeveloper.com/hrbuilds/boot-new.img.zip
2. extract boot-new.img to computer.
3. Download recovery-new.img.zip from http://www.droiddeveloper.com/hrbuilds/recovery-new.img.zip
4. extract recovery-new.img to computer.
5. power off device
6. hold BACK+POWER (or VOLUME_DOWN+POWER) to boot into bootloader.
7.
Code:
[b]fastboot boot boot-new.img[/b]
wait for device to boot.
[b]adb push boot-new.img /sdcard/boot-new.img[/b]
[b]adb push recovery-new.img /sdcard/recovery-new.img[/b]
[b]adb shell flash_image boot /sdcard/boot-new.img[/b]
[b]adb shell flash_image recovery /sdcard/recovery-new.img[/b]
[b]adb shell reboot[/b]
you now have root build, and can flash whatever build you like (test keys and all)
First post and wiki updated to show these changes in more detail.
Hi,
I have a french Magic and I test this solution.
I have a problem, when I use the adb shell, I am "root", but when I use a terminal shell on the phone I'm not "root". I use "id" for my test.
How can I do ?
Thanks.
Edit : Ok I found the problem.
I make these commands after in adb shell:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd system
# cd bin
# cat sh > su
# chmod 4755 su
# sync
# reboot
Thanks
n00b here
can we flash ROMs for dream too or need to wait for magic ROMs ?
it's possible to backup the current firmware of my magic (with or without root), before flashing a new one?
thank you for rooting the magic
thank you for your help
ok i have a big problem when i put (fastboot boot boot-new.img) the phone is restarting every time in htc presentation :S
i put the phone in recovery mode ( fastboot usb ), but then i have the same problem, when i put fastboot boot boot-new.bin, the phone restart always with "boot.bin" , no with "boot-new.bin"...
i try to give the complete path, but always the same result
hello i have a problem.
if i write fastboot boot boot-new.img the console says: the comand "fastboot" is incorrect or bla bla ...
i have a german magic.
sr-ha said:
hello i have a problem.
if i write fastboot boot boot-new.img the console says: the comand "fastboot" is incorrect or bla bla ...
i have a german magic.
Click to expand...
Click to collapse
do you have installed de SDK ¿?
hmm no i dont
should i install it the android sdk 1.5 windows ??
i hve downloadet it but i cant find a icon or sth. to install the sdk
nicola_it said:
it's possible to backup the current firmware of my magic (with or without root), before flashing a new one?
thank you for rooting the magic
thank you for your help
Click to expand...
Click to collapse
nandroid backup 2.1, avaible in recovery mode, doesn't works
sr-ha said:
hmm no i dont
should i install it the android sdk 1.5 windows ??
i hve downloadet it but i cant find a icon or sth. to install the sdk
Click to expand...
Click to collapse
unrar de SDK, and in the "tools" directory you have the ADB and FASTBOOT aplications ( use in the console mode )
Works perfectly with XP, not with vista or win7
sorry but i dont understand what schould i do.
with use in thee console
i think i have to install fastboot or open it. but i cant do nothing of both. if i click on the fastboot exe it blobs open and fast close again.
under windows xp all ok
under windows vista no!!!
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
cesardeluxe said:
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
Click to expand...
Click to collapse
The commands are the same. Just like Linux users can follow Windows directions but with some substitutions.
Download the SDK here: http://developer.android.com/sdk/1.5_r3/index.html
Follow the instructions here: http://developer.android.com/sdk/1.5_r3/installing.html
Once you have the SDK setup, you can follow the steps given in the rooting threads/wiki. Any time it says to enter a command you do it in your terminal (which on OSX i think is Terminal.app, use Spotlight to find it).
Hope this helps a bit.
i dont get this:
Code:
On a Mac, look in your home directory for .bash_profile and proceed as for Linux. You can create the .bash_profile if you haven't already set one up on your machine
i don't have that .bash_profile how do i create it?
thanks
Google easy to use and always there for you.
Clinton
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Did you check my link for your bash_profile ? This help at all?
Clinton
cesardeluxe said:
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Click to expand...
Click to collapse
Try reading this:
http://www.tech-recipes.com/rx/2621/os_x_change_path_environment_variable/
Sounds like the Path variable may be in a different file. It is the same on linux, I think it can be in a few places.
Irf you want to use adb without messing with your path you can do the following:
Code:
cd <android-sdk-location>/tools
./adb devices
This is convoluted so get that PATH working and everything should be nice and easy! Good luck.
I use a Mac, and when I was getting started I used the linux tutorials with no problem.
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
i think fastboot is not in the tools directory ...
i'd rather say the error is caused by that then a missing connection.
Does the phone write "FASTBOOT USB" ?
if you type "ls", can you find a file named fastboot in your directory?
cesardeluxe said:
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
Click to expand...
Click to collapse
The files have to be executable. You can do that by running:
Code:
chmod -R +x /path/to/tools
This makes all the files in the tools directory executable with ./
About the .bashrc or .bash_profile if you don't have one in your home directory you can safely make one. With the following command:
Code:
echo "export PATH=$PATH:/path/to/tools/" > ~/.bashrc
or if the file exists just do:
Code:
echo "export PATH=$PATH:/path/to/tools/" >> ~/.bashrc
Remember to restart the shell after you are done with this.
the reason adb work for you is because adb is in tools directory
fastboot does not. You have to get fastboot somewhere else
Whenever you get command not found, you can run another command to check
ls <program you ran>, and see what happened
Example
in your tools directory, where you have no problem running adb push, try doing "ls adb", without the quote
in your tools directory, where you have problem running fastboot, try doing "ls fastboot", without the quote
and you should see what's going on
BTW, this is fairly basic unix environment. If you are having trouble at this stage, you need to get yourself more familiar with unix environment, which is what osx is based on
I am sorry, but i don't really know where's good tutorial on unix
On google, i just search for "mac osx unix shell tutorial:, and come across this site
http://www.osxfaq.com/tutorials/LearningCenter/
Hope this help
Edit 1: btw, here's where you can find fastboot for MAC. Put it in your tools directory. IF you keep the filename as is, you need to type fastboot-mac whenever you see someone mention fastboot
http://www.htc.com/www/support/android/adp.html
yeah you're right fastboot is not on that tools directory. in fact i have looked into the whole sdk folder and i can't find it.
thanks
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Are u sure that recovery.img got transferred properly? Maybe check the rights on it (it not read only or something). What if you mount the sdcard in OS X and copy and paste (vs push)?
If you're trying to flash the recovery image, try
Code:
adb shell mount -a
adb push recovery-new.img /system/recovery.img
adb push recovery-new.img /sdcard/recovery-new.img
adb flash_image recovery /sdcard/recovery-new.img
Hope that helps
adb shell mount -a
Click to expand...
Click to collapse
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Very odd error message
Do this to check what your phone's sdcard looks like
Code:
adb shell ls -l /sdcard/recovery-new.img
Next, you should grab the file from your phone to your computer. This step assume you are in your tools directory
Code:
adb pull /sdcard/recovery-new.img recovery-new-phone.img
Finally, try to compare the file you have on your computer against the one you got from your phone, and see if they are the same. This assume you have your working recovery-new.img in tools directory
Code:
diff recovery-new.img recovery-new-phone.img
I have not try this diff command, and I assume it'l handle binary diff
If diff can not handle binary file, do ls and check file size. both file should match
Code:
ls -l recovery-new.img recovery-new-phone.img
If your computer and phone recovery-new.img are not the same, download to phone again
cesardeluxe said:
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
Click to expand...
Click to collapse
You will get Failed Mounts when u run
Code:
adb shell mount -a
You CAN ignore them.
See here: http://forum.xda-developers.com/showthread.php?p=4029461
This may not be the right way to do it but I always just downloaded the recovery to the tools directory of the android sdk. Then fire up the phone in fastboot mode and do:
./fastboot flash recovery recovery-new.img
(replacing recovery-new.img with the name of the downloaded img file.)
I'm sure there is a reason people are doing it the other way, but for myself one command to do the flash is alot easier!
Hello everyone,
I have unlocked my ASUS TF700T and then attempted to TWRP and a custom ROM. Once I did this, I began having issues. It wouldn't boot. I couldn't restore from TWRP backup. I can't seem to write to the system partition for some reason via fastboot but I seem to be able to do this just fine when in CWM or TWRP. Can anyone suggest what I may try from here? I can only get into recovery via VOL DOWN when booting and then selecting the wipe option. Right now I have two major issues. One is that for the life of me, I have never been able to get fastboot to show the actual serial of the device. It has always shown a single question mark. I have gone as far as building a Linux mint box just to get ADP and FASTBOOT drivers to install correctly on a 32-bit machine with USB 2.0. No luck, save result. My second issue is that I am unable to write to the system partition via fastboot. It gives me a remote () error message on fastboot and a could not process the command error in red on my tablet. I will have the exact error message for you shortly but right now I just wanted to get this posted. Any suggestions?
I can't flash the stock blob via fastboot and I can't seem to install a custom ROM via TWRP or CWM. Please advise.
I suspect me not being able to use ADB is my biggest problem. I can't see a serial number when I use fastboot devices. I have tried endlessly to get this resolved and I can't get it to change, AT ALL. I have installed google drivers, 32-bit fresh Linux OS, and plenty of utilities to auto install. No luck. If anyone can help with this, I'd appreciate it.
Here are my issues in a nutshell.
1.) I am unable to boot into recovery directly. I have to go into fastboot and select wipe, it then reboots and starts up in the recovery kernel. TWRP simply executes a command and then restarts and CWM actually boots and allows me to use it.
2.) No matter what I've tried, I have not been able to get the serial number to come up via fastboot. It simply shows a single questionmark. I have tried many solutions for this, but nothing changes.
3.) I am not sure but I believe the bootloader may be the problem. I can currently use fastboot but adb does not recognize the device.
Any assistance would be greatly appreciated. Thank you! I have tried different version of TWRP and clockwork mod but all seem to have the same result. I also attempted to install another custom rom just for good measure and CWM states that
-Tony
Boy oh boy! Mate, your post is one of the most confusing (and confused) posts I have read in a long time. I think you need to go back to the drawing board, forget everything you think you know and start fresh.
Let's clear some of it up:
1) CWM is a recovery (ClockWorkMod), I think you mean your rom is CM (CyanogenMod)
2) When you boot with Volume Down and Power you are booting into the bootloader, you see the bootloader menu and the tablet is in fastboot mode. The bootloader menu consists of 3 icons (if you are on a 4.2 bootloader):
RCK (recovery),
Android (system),
Wipe Data (stay away - it's a small miracle that you are not hard bricked already if you used this)
Are you saying you don't have those three in the BL menu????
RCK should be flashing and pushing Volume Up should boot you into recovery. There is no way to boot directly into it unless your rom has a modified restart menu.
3) adb and fastboot are two different protocols to connect PC and tablet. You use adb when Android is running, you use fastboot when the tablet is in fastboot mode.
Don't know what you tried to get the correct drivers working, but you probably have to go back to square 1 here too. If you use Windows check in Device Manager if your tablet is recognized at all:
Open Device Manager, boot the tablet int the bootloader and connect it via original USB cable to the PC. Do you see any change in Device Manager?
You left out the most important bits:
What bootloader version are you on?
Which version of TWRP?
How did you install TWRP if you don't have fastboot working?
What CM version are you running?
Thanks for the reply. I'll try and be more concise...
Hello,
First of all, I'd like to say thank you. I am all over the place. I will attempt to be more detailed and concise with my wording. Here are my responses below:
berndblb said:
Boy oh boy! Mate, your post is one of the most confusing (and confused) posts I have read in a long time. I think you need to go back to the drawing board, forget everything you think you know and start fresh.
Let's clear some of it up:
1) CWM is a recovery (ClockWorkMod), I think you mean your rom is CM (CyanogenMod)
Click to expand...
Click to collapse
I am familiar with the difference. I have not used nor flashed CyanogenMod. I have indeed installed CWM on recovery and can still do so. I just can't boot into recovery without using the dreded WIPE option on my bootloader. Once I use this, it restarts in CWM and I can use it (still fails to install anything on system though.)
berndblb said:
2) When you boot with Volume Down and Power you are booting into the bootloader, you see the bootloader menu and the tablet is in fastboot mode. The bootloader menu consists of 3 icons (if you are on a 4.2 bootloader):
RCK (recovery),
Android (system),
Wipe Data (stay away - it's a small miracle that you are not hard bricked already if you used this)
Click to expand...
Click to collapse
I have 2 options for my bootloader when I boot into it, fastboot(USB Icon) and wipe (I think we all know this one.) That's it. This is part of the reason why I can't get to recovery mode without using the WIPE option. (I stayed away from the wipe optoin for weeks until I was convince there was nothing else to try. Once I tried this, I was able to boot into recover with CWM or TWRP. TWRP however ONLY runs some sort of script and then reboots again. CWM allows me to use it. Hope this makes sense. Please let me know if I should clarify further.
berndblb said:
Are you saying you don't have those three in the BL menu????
RCK should be flashing and pushing Volume Up should boot you into recovery. There is no way to boot directly into it unless your rom has a modified restart menu.
Click to expand...
Click to collapse
I do not. Since I first installed TWRP, ran a TWRP backup and installed the custom 4.4.2 (I believe) rom I have not seen any other options.
berndblb said:
3) adb and fastboot are two different protocols to connect PC and tablet. You use adb when Android is running, you use fastboot when the tablet is in fastboot mode.
Don't know what you tried to get the correct drivers working, but you probably have to go back to square 1 here too. If you use Windows check in Device Manager if your tablet is recognized at all:
Open Device Manager, boot the tablet int the bootloader and connect it via original USB cable to the PC. Do you see any change in Device Manager?
Click to expand...
Click to collapse
I have gone over multiple times but I am willing to start again. I show ASUS Android Device in Device Manager for Windows 8.1 64-bit. (I have tried flashing many times on Windows 7 32-bit and Linux 32-bit both on USB 2.0. No luck, same issues, same results.
berndblb said:
You left out the most important bits:
What bootloader version are you on?
Which version of TWRP?
How did you install TWRP if you don't have fastboot working?
What CM version are you running?
Click to expand...
Click to collapse
I have no clue how to check the bootloader version without getting into Android. My bootloader doesn't seem to show it on the upper left hand side. Do you know how I can get it?
I have tried TWRP 3.2.1.0, TWRP 2.6.3.2, CWM 6.0.4.7 and Phil's CWM based recovery for the TF700. So far, none have been able to flash a custom ROM again nor the stock rom when I use recovery GUI for them. Please advise.
Also, it seems I am able to write to any partition with fastboot except for system. When I write to the system partition my tablet shows red text on the screen that states "the command flash:system failed 0x170003 or something similar. Fastboot shows a failed: (remote() error after trying to write to the partition. Someone told me my boot loader was the problem, but I have no idea how to change it without using the 'staging' or 'flash system commands.'
I'm not sure if this matters but I thought I'd post it. When I run fastboot -w it fails saying that the file system is not supported. When I run fastboot erase userdata or cache. It seems to work without any issues. Here is a sample of the output I get:
Code:
c:\adb>fastboot erase userdata
erasing 'userdata'...
OKAY [ 10.093s]
finished. total time: 10.093s
c:\adb>erase cache
Could Not Find c:\adb\cache
c:\adb>fastboot erase cache
erasing 'cache'...
OKAY [ 1.980s]
finished. total time: 1.980s
c:\adb>fastboot -w
erasing 'userdata'...
OKAY [ 10.031s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type not supported.
OKAY [ 0.001s]
erasing 'cache'...
OKAY [ 1.972s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type not supported.
OKAY [ 0.001s]
finished. total time: 12.006s
c:\adb>
When I try to use fastboot to flash the stock firmware using the staging command, I get this on my command prompt:
Code:
c:\adb>fastboot -w flash staging blob
sending 'staging' (800927 KB)...
OKAY [139.757s]
writing 'staging'...
FAILED (remote: ()
finished. total time: 140.900s
c:\adb>
on my tablet it reads in red text failed to process command flash:staging error 0x170003. I have to do a cold boot to get it back up to fastboot mode.
-Tony
qzmicro said:
Hello,
When I try to use fastboot to flash the stock firmware using the staging command, I get this on my command prompt:
Code:
c:\adb>fastboot -w flash staging blob
sending 'staging' (800927 KB)...
OKAY [139.757s]
writing 'staging'...
FAILED (remote: ()
finished. total time: 140.900s
c:\adb>
on my tablet it reads in red text failed to process command flash:staging error 0x170003. I have to do a cold boot to get it back up to fastboot mode.
-Tony
Click to expand...
Click to collapse
Tony try this instead:
Code:
fastboot -i 0x0B05 flash system blob
I have tried it with -i 0x0B05 but it never has different results
sbdags said:
Tony try this instead:
Code:
fastboot -i 0x0B05 flash system blob
Click to expand...
Click to collapse
Exact same results:
Code:
c:\adb>fastboot -i 0x0B05 flash system blob
sending 'system' (800927 KB)...
OKAY [141.843s]
writing 'system'...
FAILED (remote: ()
finished. total time: 143.016s
c:\adb>
Thanks for the advise though.
-Tony
qzmicro said:
I have 2 options for my bootloader when I boot into it, fastboot(USB Icon) and wipe (I think we all know this one.) That's it.
I have no clue how to check the bootloader version without getting into Android. My bootloader doesn't seem to show it on the upper left hand side. Do you know how I can get it?
Click to expand...
Click to collapse
What does your bootloader show? Can you post a photo?
qzmicro said:
I have tried TWRP 3.2.1.0, TWRP 2.6.3.2, CWM 6.0.4.7 and Phil's CWM based recovery for the TF700. So far, none have been able to flash a custom ROM again nor the stock rom when I use recovery GUI for them.
Click to expand...
Click to collapse
So you can still flash different recoveries via fastboot and enter them from the bootloader. That means you should also be able to use "adb shell" to connect to your recovery (when it is running). What does the recovery do when you try to flash a ROM?
If adb shell to your recovery works, exit it again and run these commands to assess your situation:
adb shell ls -l /dev/block > devblock.txt
adb shell dmesg > dmesg.txt
adb shell hexdump -C /dev/block/mmcblk0p3 -n 64 > mmcblk0p3.txt
and post the resulting files.
Tony - consider yourself lucky since you caught the attention of two of the best people in this business. Do try to get the info _that was asking for.
I am just trying to clarify things:
Do you remember what stock rom you had before you started this adventure?
It sounds as if you were on pre-JB 4.2 stock rom, then flashed some TWRP version and then a KitKat rom?
If you can flash recoveries, you do have fastboot access to the tablet.
@_that, @sbdags Would it be an option for Tony to flash a CWM recovery that "let him use it" and try to flash sbdags' bootloader/TWRP package?
Tony - don't do anything before you get their advice.
OS
Tony I see that your using a windows PC.. I would highly recommend a Linux Mint OS... There are to many bugs in windows when you are working with low level Android/SoC platforms .... Im not going to say it will fix your issues, but I have seen it do just that for lots of users.... Just let me know if this sound like something for you, when and if your ready, the community with be here to help you out....As always thx lj
I am getting my Linux mint 32-bit OS on my laptop with USB 2.0... again.
Hi guys,
I thank you deeply for your time. I have learned so much trying to un-brick this thing, and yet have had no results. I will be putting together my mint box in just an hour or so and then testing/trying your suggestions. Please check back in an hour or two. Cheers.
-Tony
Here is what my bootloader looks like.
_that said:
What does your bootloader show? Can you post a photo?
Click to expand...
Click to collapse
I have attached the screenshot below.
_that said:
So you can still flash different recoveries via fastboot and enter them from the bootloader. That means you should also be able to use "adb shell" to connect to your recovery (when it is running). What does the recovery do when you try to flash a ROM?
Click to expand...
Click to collapse
It usually fails when it tries to write to the system partition. Please refer to the posts above. It tends to show the FAILED (Remote() error after the write command. My tablet also shows an error saying it could not process the command.
_that said:
If adb shell to your recovery works, exit it again and run these commands to assess your situation:
adb shell ls -l /dev/block > devblock.txt
adb shell dmesg > dmesg.txt
adb shell hexdump -C /dev/block/mmcblk0p3 -n 64 > mmcblk0p3.txt
and post the resulting files.
Click to expand...
Click to collapse
Giving it a try now, I'll let you known what happens.
-Tony
I do not recall. At the time I knew, but not anymore.
berndblb said:
Tony - consider yourself lucky since you caught the attention of two of the best people in this business. Do try to get the info _that was asking for.
I am just trying to clarify things:
Do you remember what stock rom you had before you started this adventure?
It sounds as if you were on pre-JB 4.2 stock rom, then flashed some TWRP version and then a KitKat rom?
If you can flash recoveries, you do have fastboot access to the tablet.
@_that, @sbdags Would it be an option for Tony to flash a CWM recovery that "let him use it" and try to flash sbdags' bootloader/TWRP package?
Tony - don't do anything before you get their advice.
Click to expand...
Click to collapse
I do not recall the stock ROM but I DO KNOW I updated to the latest firmware right after I opened it (Big mistake I know... now.) So, I had no choice but to factory unlcok it with the ASUS TOOL. This was for X-Mas two months ago, so I should be the latest I'd immagine.
I did indeed install a kit kat rom on my first attempt and someone told me I forgot to put the proper bootloader prior and that is why I bricked it. So, I think you are dead on about that but can't confirm.
I do indeed... only problem is that I always get a damn ? for my serial number. I do not believe it has ever shown anything but.... though I didn't check until after I had this problem. I do not recall checking prior to using TWRP to install the kit kat rom zip files.
I will wait. i am very greatful to have help, especially from the top dawgs. xP Cheers!
-Tony
I'm on mint 32-bit OS.
lj50036 said:
Tony I see that your using a windows PC.. I would highly recommend a Linux Mint OS... There are to many bugs in windows when you are working with low level Android/SoC platforms .... Im not going to say it will fix your issues, but I have seen it do just that for lots of users.... Just let me know if this sound like something for you, when and if your ready, the community with be here to help you out....As always thx lj
Click to expand...
Click to collapse
I'm on it. I installed mint on my laptop and am using a USB 2.0 interface. I am willing and able to try whatever you might suggest. Cheers.
-Tony
I get a permissions error when using adb shell in CWM recovery...
_that said:
If adb shell to your recovery works, exit it again and run these commands to assess your situation:
adb shell ls -l /dev/block > devblock.txt
adb shell dmesg > dmesg.txt
adb shell hexdump -C /dev/block/mmcblk0p3 -n 64 > mmcblk0p3.txt
and post the resulting files.
Click to expand...
Click to collapse
After the first command I received:
Code:
Tonys-Mint antonio # adb shell ls -l /dev/block > devblock.txt
error: insufficient permissions for device
This is the error I get when running the first command you asked for _that. Please advise, thank you! Is this something we can fix? Thanks.
Code:
Tonys-Mint antonio # adb shell ls -l /dev/block > devblock.txt
error: insufficient permissions for device
Tonys-Mint antonio # adb shell dmesg > dmesg.txt
error: insufficient permissions for device
Tonys-Mint antonio # adb shell hexdump -C /dev/block/mmcblk0p3 -n 64 > mmcblk0p3.txt
error: insufficient permissions for device
Tonys-Mint antonio #
They all basically told me I have no permissions to my device. Any thoughts? If anyone can/wants to assist outside these forums, please just let me know. I can't offer to pay but I can offer a free pizza at your house no matter where you live! LOL. Cheers fellas!
-Tony
qzmicro said:
I do not recall the stock ROM but I DO KNOW I updated to the latest firmware right after I opened it
Click to expand...
Click to collapse
Your photos show a 9.4.5.x bootloader (and I'm 100% sure about this), which is strange because normally the bootloader is updated together with the stock firmware - so if you updated to the latest firmware, you should also have the latest bootloader (10.6.1.14.x).
qzmicro said:
After the first command I received:
Code:
Tonys-Mint antonio # adb shell ls -l /dev/block > devblock.txt
error: insufficient permissions for device
This is the error I get when running the first command you asked for _that. Please advise, thank you! Is this something we can fix? Thanks.
Click to expand...
Click to collapse
What did the tablet screen show while you ran these commands? The recovery's menu? Which recovery (and version) do you currently have installed?
_that said:
Your photos show a 9.4.5.x bootloader (and I'm 100% sure about this), which is strange because normally the bootloader is updated together with the stock firmware - so if you updated to the latest firmware, you should also have the latest bootloader (10.6.1.14.x).
What did the tablet screen show while you ran these commands? The recovery's menu? Which recovery (and version) do you currently have installed?
Click to expand...
Click to collapse
It just sits there on the main screen as if nothing has happened. Here is a screenie...
-Tony
qzmicro said:
It just sits there on the main screen as if nothing has happened. Here is a screenie...
Click to expand...
Click to collapse
hmm... ok. Try running these commands:
Code:
adb kill-server
adb devices
and post the output.
For the first time EVER, I see the serial number!
_that said:
hmm... ok. Try running these commands:
Code:
adb kill-server
adb devices
and post the output.
Click to expand...
Click to collapse
Here is the output:
Code:
Tonys-Mint antonio # adb kill-server
Tonys-Mint antonio # adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
015d2a50692c0a08 recovery
Tonys-Mint antonio #
Please note that this is the first time the device has EVER shown it's serial number since this all started. Usually it just shows a single question mark. Good sign?! Please advise.
-Tony :fingers-crossed:
qzmicro said:
Here is the output:
Code:
Tonys-Mint antonio # adb kill-server
Tonys-Mint antonio # adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
015d2a50692c0a08 recovery
Tonys-Mint antonio #
Click to expand...
Click to collapse
That looks good so far. Try
Code:
adb shell
and see if you get a shell prompt from the tablet. If you do, type "exit" to get out again, then run the 3 commands I posted earlier.
_that said:
That looks good so far. Try
Code:
adb shell
and see if you get a shell prompt from the tablet. If you do, type "exit" to get out again, then run the 3 commands I posted earlier.
Click to expand...
Click to collapse
Hello, this is what I get...
Code:
Tonys-Mint antonio # adb shell
~ # adb shell ls -l /dev/block > devblock.txt
/sbin/sh: adb: not found
~ # adb shell dmesg > dmesg.txt
/sbin/sh: adb: not found
~ # adb shell hexdump -C /dev/block/mmcblk0p3 -n 64 > mmcblk0p3.txt
/sbin/sh: adb: not found
~ #
I am getting excited, I had not made any leway in over 4 weeks. Those commands seem to have failed though. I kindly await your response. Cheers.
-Tony :cyclops:
qzmicro said:
I am getting excited, I had not made any leway in over 4 weeks. Those commands seem to have failed though. I kindly await your response. Cheers.
Click to expand...
Click to collapse
You forgot to type "exit". But adb shell is working now, that is good. Type "exit" now, then run the 3 commands again, then post the 3 resulting files.
Hello,
I am trying to figure out how to either inject a custom bootloader like Clover onto my Nvidia Shield, or to Modify the existing EFI bootloader itself or with a modification to a Recovery program such as TWRP in order to be able to use a custom bootloader to select "Boot From Usb"
I figure I oughta make a backup, but I do not know how to backup my bootloader either....
I think I understand how to look at the shield's partitions now to find the one with the bootloader, I'm just nervous to proceed...
I have been researching for a week and have learned amazing tidbits of knowledge on the sublayers of the shield, and a lot of its partitions...
I was able to install a custom OS, modified GAPPS, and root on my shield, I am just hung up on this final part....
If anyone would care to share even a bread crumb where to start, I Would Be Ever So Grateful
Download Clover EFI Bootloader - MajorGeeks
Clover EFI Bootloader can boot OS X, Windows, and Linux on Mac or PC with UEFI or BIOS firmware.
www.majorgeeks.com
Root Nvidia Shield TV Pro 2019 Version
THIS IS OUTDATED https://forum.xda-developers.com/t/bootmod-root-your-shield-in-1-minute-2015-2017-2019.4524873/ REPLACES THIS IF YOU WANT ANDROID OR USE THIS GUIDE...
forum.xda-developers.com
I forgot to ask, IS THERE A PULL COMMAND FROM FASTBOOT, TO COPY PARTITIONS? MY GOOGLE FU IS SUPER BUT MAN I AM HAVING A HARD TIME FINDING EXACTLY WHAT I'M LOOKING FOR :-(
jenneh said:
I forgot to ask, IS THERE A PULL COMMAND FROM FASTBOOT, TO COPY PARTITIONS? MY GOOGLE FU IS SUPER BUT MAN I AM HAVING A HARD TIME FINDING EXACTLY WHAT I'M LOOKING FOR :-(
Click to expand...
Click to collapse
Typically partions get 1:1 bitwisely copied to PC by dd command ( AFAIK it's present in every Android distribution ) what can be achieved by means of ADB.
Example - for Windows PC only:
Code:
adb devices
adb exec-out "dd if=[BLOCK-NAME-OF-PARTITION-HERE] bs=4096" > C:\[NAME-OF-BACKUP-FILE-HERE]
jwoegerbauer said:
Typically partions get 1:1 bitwisely copied to PC by dd command ( AFAIK it's present in every Android distribution ) what can be achieved by means of ADB.
Example:
Code:
adb devices
adb exec-out "dd if=[BLOCK-NAME-OF-PARTITION-HERE] bs=4096" > C:\[NAME-OF-BACKUP-FILE-HERE]
Click to expand...
Click to collapse
Thank You! That is thinking outside the box haha I kept trying to do it through fastboot knowing there is very limited amount of commands, not realizing that Would Never Work. I appreciate Your Time! I will try adb now!!! It's so funny, it seems like such a simple answer but sometimes we see so many paths, it's hard to know which one to take...
jwoegerbauer said:
Typically partions get 1:1 bitwisely copied to PC by dd command ( AFAIK it's present in every Android distribution ) what can be achieved by means of ADB.
Example - for Windows PC only:
Code:
adb devices
adb exec-out "dd if=[BLOCK-NAME-OF-PARTITION-HERE] bs=4096" > C:\[NAME-OF-BACKUP-FILE-HERE]
Click to expand...
Click to collapse
Hello! May I pry your mind for a moment?
I ran this command on my shield "fastboot erase system" except instead of running it directly in the command line on windows,
I made a batch file for it, and when I ran the batch, it succeeded but it did something strange, it printed this message inside the batch
"
{\rtf1\ansi\deff0\nouicompat{\fonttbl{\f0\fnil\fcharset0 Calibri;}}
{\*\generator Riched20 10.0.19041}\viewkind4\uc1
\pard\sa200\sl276\slmult1\f0\fs22\lang9 fastboot erase system\par
fastboot erase boot\par
\par
}
"
It completely deleted the two commands i had in there and pasted that instead... do you know what that is by any chance or Why it did that? o.o It is fascinating!
I can not understand what you are doing: For me it is complete confusion.
jwoegerbauer said:
I can not understand what you are doing: For me it is complete confusion.
Click to expand...
Click to collapse
No worries, thank you for your time, Seriously. That ADB suggestion was Exactly what I Needed... Have a beautiful day!