Related
I had CM6 on my G1 with HBOOT-1.33.2005.
I downloaded RC7 and accidentally installed it without flashing HBOOT-1.33.2003 and now it says HBOOT-0.95.0000.
Is this OK? If it is, im gonna start flashing it back to 1.6.
maxppp said:
I had CM6 on my G1 with HBOOT-1.33.2005.
I downloaded RC7 and accidentally installed it without flashing HBOOT-1.33.2003 and now it says HBOOT-0.95.0000.
Is this OK? If it is, im gonna start flashing it back to 1.6.
Click to expand...
Click to collapse
so you went back to android 1.1 or 1.5? you dont have any engineering spl anymore as far as i know.
that means you have to start right from the beginning with rooting flashing etc
pls correct me if im wrong
Edit: do you still have a modified recovery or is it the stock one?
Hi, I went back right to the beginning which is DRC7 (version 1.0)
Im not sure about the recovery image question, how would i find out?
boot into recovery. (did you flash another recovery some time earlier?)
so if it is the one you had then you dont have to start from the beginning.
is it one without a menu or with a menu of 3 options you have to look for tutorials and start all over
why dont you just get into fastboot, wipe everything, fastboot flash EZterrys new radio & hboot, and than flash biffmod 2.1 ROM?
i did it this morning, and i must say... t'is nice ;]
I rooted according the directions found here: http://www.droidfiles.us/nexus-s-4g/root-nexus-s-4g/ after getting a new Nexus S 4G.
Even after locking the bootloader. It goes to the Android-with-box then to the Exclaimation-point-inside triangle. When I volume-up and power-button from that screen, an "Android Recovery <3e>" comes up...
Does anyone know what might be going on? And how do I get my custom recovery to stick?
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
mikeyinid said:
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Apparently alot of people have this issue, me included. I seen some posts about using root explorer to change the name of the recovery image if it shows up in system /ext. Sounds crazy but I hear it doesn't show up on all phone's. IV come to terms with having to fastboot every time I flash but I'd love to see a fix. Have you tried Amons recovery?
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Have you flashed recovery through Rommanager when your phone boots up?
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
mbh87 said:
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
Click to expand...
Click to collapse
No, I dont think your wrong bro. It makes sense. Ill test your theory soon.
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
david1171 said:
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
Click to expand...
Click to collapse
I just had CWM, never had any issues. Im not sure what dictates whether that file is there or not. Im guessing that since tony is so quiet though he got it figured out..
whats amazing is i dont have this script and its one of the things holding the one click up :x
also its part of init.rc so technically a new kernel would.. in theory wipe that out...
mikeyinid said:
Have you flashed recovery through Rommanager when your phone boots up?
Click to expand...
Click to collapse
I did flash CWM through Rom Manager. That didn't work the first few times. It stalled...
mikeyinid said:
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
Click to expand...
Click to collapse
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
TonyArmstrong said:
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
mikeyinid said:
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
TonyArmstrong said:
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
Click to expand...
Click to collapse
OCD, I know the feeling lol. What got it to stick?
derekwilkinson said:
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
Click to expand...
Click to collapse
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
TonyArmstrong said:
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
Click to expand...
Click to collapse
well the "make sure it sticks" flashing with rom manager doesn't make any sense. the only way the recovery would be overwritten is if the ROM you flash over writes it or in fastboot
mikeyinid said:
OCD, I know the feeling lol. What got it to stick?
Click to expand...
Click to collapse
Yeah, I'm very anal when it comes to this kind of stuff...I was a developer for a little bit (Java middleware, then on to the front-end stuff) where regression testing was important. Sometimes, it's best to reload things piece by piece to see what breaks what. Then go from there.
I haven't gotten it to stick yet; gonna get some sleep and start over tomorrow. I used fastboot to push the stock boot, bootloader, system, recovery, and userdata IMGs a moment ago, and the phone is back to bone stock.
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
fashofasho said:
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
when you did S-OFF in order to install Cyanogen JB first you had to flash the latest fw version and then the rom
the rom you tried to install requires the latest fw version
now are you still s-off?
what is now your hboot version?
what is your fw version?
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
i got confused
.i think your answer is going for fashofasho
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
Thanks for the reply. Okay so here is where I am currently at. I haven't done anything since I reflashed stock ROM throguh RUU after the fail cyanogen flash. On this stock ROM whenever I load into bootloader it still says s-off 1.17 but I did lose my clockworkmod. So according to your instructions I should either clockworkmod again or 4ext now, that's okay right? If so, going to flash firmware then cyanogen!! Or is there a problem that I have s-off but not recovery.
P.s. there is no point in running revolutionary and have it s-off again when I already have it right, just thought it might be necessary to make things fresh
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Skipjacks said:
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
fashofasho said:
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
Click to expand...
Click to collapse
flash su-2.3.6.3-ef-signed.zip first and then install 4ext recovery
You're over engineering this. You don't need to root your current ROM first. That's an extra step since you're s-off.
If you are s-off it's really simple to get 4EXT recovery.
First, download this and put it on the root directory of your SD Card (meaning not in a folder, just on the SD Card. Do not rename it)
http://d-h.st/qnm
I got this download link from here...
http://forum.xda-developers.com/showthread.php?p=21989107
Click Thanks for Joaquinf in that thread. He made the 4EXT zip that's flashable through the bootloader.
That is 4EXT made into a zip file that's flashable via the bootloader, which you can do when you are S-off.
So put that file on the SD card, power the phone off, pull the battery out for a second and put it back in (this stops fastboot so you can get back to the bootloader). Then hold volume down and power at the same time. You have to hit both buttons at the same time. If it goes to the splash screen, pull the battery and try again.
When the bootloader loads up it will immediately find the PM58IMG.zip file. It will ask you if you want to install the update. Say yes by hitting volume up I think (it will tell you how to say yes)
Put the phone down and don't touch it until it tells you it's done. Should just take a second. But seriously don't touch it. Leave it alone.
If that works, you've just flashed 4EXT. You can check it by pulling the SD card out (so it doesn't try to flash the PM58IMG again) and rebooting to the bootloader and selecting 'recovery' from the menu. 4EXT should boot up.
This entire process so far shouldn't take more than 3 minutes total. It just sounds like a lot.
To see this detailed out by someone else in case you want to check what I'm saying, read steps 4 and 5 of the first post in this thread.
http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
Give the author 'thanks' again because he's awesome and deserves it.
Now you've got 4EXT installed. Great. You're 1/3rd of the way home.
Now you need to update your firmware. Delete the PM58IMG.zip file you used to flash 4EXT off the SD card (use a card reader or boot the phone up and delete it, whatever works. You can also use 4EXT as a card reader now too by choosing USB storage from inside 4EXT. It will give you access toteh SD card on your computer now)
Now get new Firmware from this thread.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
try the 3.33 firmware universal. First download link in post 2 of the thread above.
CHECK THE MD5 SUM!!!! I'M NOT PLAYING AROUND HERE!!! You are worried about bricking your phone, this is where you can do it if the firmware .zip is bad.
Put that PM58IMG file on your SD and flash it in the bootloader the same way you flashed 4EXT recovery a minute ago. (If you're still in 4EXT recovery you can use it's power menu to reboot into bootloader easily.)
This will take a minute. The phone will shut off and go black in the middle of this process. Your heart will skip a beat. Relax. It'll come back on. Again, put the phone down and walk away while it does it's thing and don't touch it until it says it's done.
Delete the PM58IMG file from your SD card.
You are now 2/3 of the way there. Your phone WILL NOT boot up right now because your ROM is not compatible with your firmware. Relax. That's supposed to happen.
Now you can flash CM10. Make sure you have the CM10.zip file on your SD card nad GApps. (Bruce has Gapps in his downloads page). Delete the PM58IMG firmware file from your SD card (that's important)
Pull the battery again so you can get back into bootloader. Get into bootloader (power + volume down)
Select Recovery
4EXT should boot up.
Go to the Wipe menu. Wipe all partitions except SD card. (Old ROM is now gone)
Go back to the main menu.
Install from SD
Find the CM10.zip file you should have downloaded and put onto the SD card. Flash it.
This will take about 3 minutes. 4EXT will flash it and ask if you want to reboot. You do not yet. Not you need to flash Gapps the same way you flashed the ROM.
When that's done, now you can reboot. You shoudl see the CyanogenMod boot animation after the splash screen. Give it a few minutes to boot up this first time. Once it boots, set it up the way you like it. If you enjoy it, donate a few bucks to the developer, Bruce.
You don't have to root CM10. It's already rooted when you boot it up the first time.
Long time lurker first time poster. I had a Nexus One two years ago so I was here very very often.. Since I got my Desire S a year ago, I haven't been able to flash a custom rom OR S-OFF.
Unlocked with HTCdev, rooted, HBOOT 2.00.0002 (downgrading hboot never worked either), S-ON
Last night I tried again to get onto ICS (official RUU doesn't install either). I installed 4EXT touch, flashed recovery, had my ROM (Fallout) on SD ready. Rebooted phone into new recovery to find that is was still the OLD revolutionary recovery and not 4EXT. This was 4am so I thought I'd try the usual wiping + rom flash. It went through normally and said completed although the progress bar only got about 1/3rd before jumping straight to finished. Rebooted.. stuck at white HTC logo screen.
My issues are that I cannot install HTC Sync phone drivers without phone powering up to be recognised by the PC, AND I cannot turn USB debugging on for obvious reasons
My phone is veryvery important and I'm now scared I won't be able to get it working again. Please help me.
TLDR; stuck on White HTC logo screen, no Android installed, cannot see how I can install one, help!
If anyone could shine some light on what I need to do next, I'd be very grateful.
Thanks in advance.. and afterwards
How did you flash the recovery? In fastboot? And did you flash the boot.img (also in fastboot) of the Rom you flashed?
You should definitely have read more before flashing anything...
teadrinker said:
How did you flash the recovery? In fastboot? And did you flash the boot.img (also in fastboot) of the Rom you flashed?
You should definitely have read more before flashing anything...
Click to expand...
Click to collapse
For the 4EXT recovery I 'flashed' it from inside the touch app thinking that was enough these days.. naively. Had just been fighting with GF at 4am and was fed up and about to go to bed and in Revolutionary recovery so I thought what the hay, I'll wipe etc in here and use this to try and flash the rom.
I did not flash the boot.img. I goofed. I understand that but now I'm just desperate for any route back to a functional device.
I never stopped installing ROMs and etc on my old Nexus One but that was a while ago and everything just seemed to work. Desire S is being a nightmare.
Decide what you want to do.
If you want to upgrade the phone to official ROM - relock your bootloader and run RUU.
If you want to use custom ROMs - flash the recovery from fastboot and don't forget to flash the kernel from fastboot too.
I won't get into any more details, searching for the right info with these pointers will get you whatever you might need.
Thank you, I'm all fixed. Simply found an old 2.3.5 ROM and flashed and booted fine. Reason I was so stuck was because I had formatted my PC since last installing phone drivers so I couldn't do much hurdur
was running viperXL 3.2.5 and wiped and went to cm10.1 now i used goo manager to download xhata (sorry i butchered it) now i can only boot into spash screen and bootloader. i used fastboot to reflash twrp and still only boots to the custom spash... hboot 1.09 s-off..... im kinda lost here. should have syuck with viper, why screw with perfection.
What is xhata? Is it a rom?
I'm not sure we can install roms with Goo Manager on this phone.
If you installed a rom for the quad-core Tegra One X, your phone will not boot and you're lucky you didn't get a brick. You need to do a full wipe and reflash.
first off not a noob. it was the evita rom. i still have bootloader access and can get half way into recovery( spash screen then twrp spash...) then reboot into custom splash. it was the rom... http://forum.xda-developers.com/showthread.php?t=2075783 so if anyone has any ideas please help, just dont start with the usual u screwed up flashing roms i know better. and the odd part is after reflashing the recovery via fastboot i get Twrp spash before going back to the phone main splash and boot looping.... and yes im s-off
No need to be so defensive. If we don't know exactly what you flashed, all we can do is ask. Its not meant as an insult. But its always better to ask the seemingly "obvious" questions first, get them out of the way.
If there is a "usual thing" that gets mentioned, its because the mistake of flashing ROMs for the ENDEAVORU in fact happens so often. Downloading from GooManager is not a great idea either, and often a red flag that someone installed a ROM for the wrong version of the phone.
Did the phone operate properly when you were on CM10.1?
What version of TWRP, and what fastboot command did you use to flash it?
I asked the "usual" questions because:
-You have less than 100 posts. That's often a sign of someone who is new to this.
-You used a rom name I've never heard of, and suggested you weren't sure of the name yourself. That's usually a big red flag for someone who flashed some random rom they found via Google.
-You mentioned using Goo Manager. That's a non-standard method for this phone, and an awful lot of people have bricked their phones trying to flash roms through apps that aren't well-supported. CWM Touch was notorious for this when the One X first came out.
If you don't want people to assume things, you need to state them up front.
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.
iElvis said:
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.
Click to expand...
Click to collapse
Yeah, I saw that too, and why I asked the OP what version of TWRP.
i had problems with that rom on version 4.0.1 and 4.1.0 had alot of errors and trouble. i haven't tried 4.2.0 though, i have been having better luck with rom after clearing out recovery cache running "fastboot erase cache" and running only twrp 2.3.3.1.
i flashed the second to last release of twrp (latest gave mount issues), viper was running great, cm 10.1 avatar was running fine just didnt like how plain it was so i used goo manager to download hatkaXL and when the download finished i picked select and flash.. then the usual warning about flashing and it rebooted, hit spash screen where it still is hours later. i then tried manually boot into recovery, it hit the bootloader i selected recovery and it seemed to try and load. next step was back to fast boot and to reflash twrp (fastboot flash recovery recovery.img ) flashed 100% success and still wont boot into recovery just the bootloader, and i wasnt trying to get all defensive, i sent first post using the wifes phone and posted quick, had a guy hooking up my satellite at same time as phone crashed. has anyone tried the new version of cwm for the evita? maybe flashing that may get me back, i have roms and backups on the pc that i can seem to side load but never boot as well.
well after repeated flashing of recovery and (fastboot erase cache) it finally booted to recovery, now to see if my backup will load.