Related
As the title says, I seriously think I am just being stupid. But I have just spent the last 5 hours searching, trying, and just about anything I can. But I can't seem to get anything to work.
Now on to my situation:
I just got a new Tilt, it is not my first. My first one was when it first came out for AT&T. So it was still the WM6Pro and I SIM CID and HardSPL'd it. So I do know how to do this stuff. Just now with this new one, it must be a newer one, because it came with WM6.1 on it.
Here is what I know I have on it. Bootloader shows this.
KAIS1*0
SPL-3.56.0000
CPLD-8
And this is when the AT&T logo pops up.
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Now the first thing I am trying to do is HardSPL it.
I swear I have tried everything.
First thing I tried was the simple, Kaiser SIM/CID Unlocker & Changer , I start with the Flash-HardSPL and get to the Bootloader saying USB with the Rom updater showing the status bar. Then with the phone still in bootloader, I get Error [260] : Connection, The Update Utility cannot connect to your PDA. and so on.
So I exit that. Go on to the next try.HardSPL v3.07-3.56
All of them end up as the same result as the first. But I will explain what V3.28 as I have heard and read that that is one of the best ones to use.
Get to bootloader, Computer monitor shows status bar, and phone shows status bar. And I wait for it to do anything and then maybe a minute or two it gives me an error. Error [262] : Update Error, The ROM Update Utility has encountered communication errors during the update process. and so on for recovery.
I've also tried to do the HTC Kaiser Hard-SPLv1 - CID Unlock & Flash any ROM to your device (4 free)
When I start this one up it gets me to my screen being completely white. and I can not continue after that without taking the battery out and starting the phone again.
I have also tried other things that I just cant remember right now, cause I have been trying to do this for so many hours, and downloaded so many different things. So if you can and may help me, anything and everything will be appreciated beyond the gratitude I can give. Once again, I do know what I am doing, but I do not know what I am doing ARGHHH! lol.
I think you need JumpSPL1.56-KAIS, then hardspl , Im assuming this because you didnt say you did this step in your post.
Read post #2 here http://forum.xda-developers.com/showthread.php?t=396922
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
Click to expand...
Click to collapse
I tried that one, and for 2nd poster, I did try that also. Sorry for not listing. But I still appreciate the help guys.
I was also thinking I had to go back to 6.0 but I went 55 pages back on this section of the forum, and I still cant find it. I'm still looking, but it seems like a dead end to me. =/
there was a guy having this issue a while back, look in the white screen thread towards the end! I will see what I can find for you!
Right now I found a 6.0 ATT rom, so I got that to work, now I will try unlocking it, thank you guys, and thanks to this post (70+ pages back!) http://forum.xda-developers.com/showthread.php?t=326933
Edit 1 :
Alright I got it back down to 6.0, but yet I still cant do anything with HardSPL, CID, or Security. If anyone has any solutions I will listen! Even if its bashing my head against anything! LOL! Sucks!
downgrade I don't believe is necessary
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236[/quote
Nope, I didn't have to. My tilt came with 6.1. I had some problems, ended up switching to an XP laptop, was using Vista(prem. sp-whatever). It's too late here, but maybe tomorrow I can figure out what I did, but I think the main thing was using a windows XP pro machine - don't know if it needed to be pro, but that's what I had. Thereafter I've used the vista machine without problem. Good luck.
Click to expand...
Click to collapse
Meh, you need to use JumpSPL first. I've had this happen before, and JumpSPL cleared it right up for me.
I think Jocky has a few you can use. Check his HardSPL thread.
I first tried to use Vista, but then went back to my xp machine.
Edit :
I've tried to the JumpSPL but had major brain damage last night. trying it again with a fresh day. Will let you know.
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Yeah, well I can NEVER find anything via search here. Hell, to prove that point, I just typed "stupid" in the subject search line and found: NOTHING!!! I don't know what the deal is, but I've just pretty much given up searching this site.
Which leads to more reading than I'd typically care to do.
J
Munchys said:
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Click to expand...
Click to collapse
Glad to hear you got it fixed.
Awesome, fully got it unlocked and everything! Thanks for telling me what I might have missed and messed up on!
Hi there
i'm really stuck at the moment and i've been reading threads after threads on this forum and i still couldn't find any solution and no luck with search as well.
my current problem is that i flashed a hero rom (i believe it's called myhero) about half a year ago when i first got it, but now i want to go back to the original Roger rom so that i can update to the new RUU. But i have no luck going back to the original rom at all. Anyone here would like to help?? i dun want to see my data plan go to waste just because of this
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT - 1.33.0009 (SAPP50000)
CPLD-12
RADIO - 3.22.20.17
PS: i tried many different ways, including unlockr's unrooting method, someone's nandroid wiped roger rom etc, but either htc sync said usb error or my fastboot screen said update failed. please help~
Should work using this method, just apply the update while the phone is in fastboot mode.
i tried that but i never knew i need to go into fastboot mode, i will give that a try, thank you very much
~dimdim~ said:
i tried that but i never knew i need to go into fastboot mode, i will give that a try, thank you very much
Click to expand...
Click to collapse
You don't usually need it. But if HTC Sync can't find the phone, you can apply the update trough fastboot. Let me hear your result.
yes same as before i get an error 170: usb error, is there any other way :S??
fastboot errors on mine also.
(If ROM installed via official HTC RUU- RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe)
UPDATE!! **SOLVED** April 25, 2010
Download new RUU
http://www.multiupload.com/XQEH9NVGY7
Flash with Goldcard method http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
1. Download RUU linked above.
2. Install update using RUU.
3. Turn on phone and connect to computer.
4. Get RA recovery and SPL also linked above and drop them to sdcard root directory.
5. Run SDK: adb shell
6. Install recovery: flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img http://forum.xda-developers.com/showthread.php?t=561124
6. Turn off phone and turn on again holding Power+Home. RA Recovery should appear.
7. Flash zip from sdcard.
8. Use file: update-hboot-1762007-signed
9. Done. PSPL broken.
10. Build a shrine for orange_24
****************************************************
**Not Successfully Rooted: Feb. 2, 2010 (AFAIK)
I decided to start this thread because the info for again obtaining root, for those of us dumb enough to update to the official Rogers ROM 3.05.631.7 via the RUU, is all over the place in about a million different threads. My hope is that we can organize it all in 1 place.
At this point, yes, we all know we were impatient and newbs and everything else. Ok, lesson learned. So, lets move forward and try to get this thing rooted.
If you are a developer who has the talent to help root this ROM and have lost interest in the Magic or moved on to the Nexus One or Droid, we ask that you please try to spend a few moments on this and help out those of us who are really stuck here. Personally, I'm getting pretty desperate and thinking of even replacing the phone.
Please post what you've tried in attempting to again obtain root, your failures and hopefully successes.
*One Click Root: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/ Cant' back up Recovery.img Error(Tried clicking the hidden Star next to "Back Up Recovery" and skipping this step...and just flashing recovery-RA-sapphire-v1.5.2H.img. Didn't work either) Tried with Amon_RA Hero recovery.img also, without success.
*Tried downgrading to Rogers' last official ROM via the RUU for (Rogers)_RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed. Attempted several times both with and without a goldcard installed.
*ADB: Will see the device, initially, but a command of "adb remount" kills the connect. same with "adb root" **EDIT
*Fastboot: Error- Does not allow access
*Relentless Rooter: http://forum.xda-developers.com/showthread.php?t=556200 No luck obtaining root
*Fix Perfect SPL: http://forum.xda-developers.com/showthread.php?t=548218&highlight=create+gold+card With one GoldCard getting Update Fail error that SAPPIMG is older than one installed. When trying the other GC, get Update Fail Error that Model ID is incorrect. Tried 2 different micro sd cards, one Sandisk and one Patriot. The card was recognized by my pc after I was done creating the GoldCard, so unless I'm doing something wrong the GC was created properly. Is the goldcard.img supposed to dissapear or remain on the card after your copy/paste write/save to the sd card disk?
* Tried RUU for RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=625108 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU for RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=621415 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
I've probably tried a few more methods to obtain root. Those were all fails, too. I'll post the links, as well, when I find them again.
Hopefully this thread will lead us all in the right direction.
Here is the link to the same topic in the HTC Dream Forum-in case they find out something that might help us out: http://forum.xda-developers.com/showthread.php?t=625732
i guess its time to play doctor with my new phone from rogers and swap the board from my old one.....
considering nothing works, i think any new idea would be a good idea
novadoc said:
considering nothing works, i think any new idea would be a good idea
Click to expand...
Click to collapse
like i said my idea was to swap my old motherboard into the new phone
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
novadoc said:
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
Click to expand...
Click to collapse
i already did it lol im more of a hardware then software
I know it might be nothing but when the Rogers RUU unpacks the img file loads as sappdimg and not sappimg. I don't know if the extra d in there means anything or if its something that shows up later.
I also try every method above and not luck also...
is there a possible way of tricking the system... with a higher build number and SPL with a custom installation from files that I see from one of the post where rogers send the user some files because they were running Win7?
I think that's the problem
We have the highest spl# and its perfected
So until someone gets their hands on a higher version than ours that is imperfect or engineering...
We are SOL, although I am hopeful someone is working on this for us.
shael said:
i already did it lol im more of a hardware then software
Click to expand...
Click to collapse
Did it work?
I have an Rogers HTC Magic and I didn't apply any update from Rogers since I bought it on June 2nd.
It's very strange that "adb devices" doesn't see the device?
have you enable the "USB debugging" ?
That part should work (when the devices is started).
novadoc said:
Did it work?
Click to expand...
Click to collapse
pfft ya ofcourse it worked... i have my older motherboard with my old rom and my old info all i did was swap the screen and case.... done deal... 5 min job lol
Would someone please report the radio and SPL versions (for the result of the 3.05.631.7 update)?
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
Well, until it gets cracked, here's something that will make you feel a little better about being stuck on this ROM.
Google Search by Voice, installable .apk from Euro Android Market. Just run the installer through Astro, etc., and G Search by Voice is back on the Search button of your phone. You might need to launch the app first via the icon in the app tray, then reboot the phone to make the search button recognize its there. But it will be there.
http://www.eclosion-android.com/com.google.android.voicesearch.apk
BTW, not my link in case mods want to get involved.
Enjoy!
i think the first step would be to getting ADB working again
any ideas?
novadoc said:
i think the first step would be to getting ADB working again
any ideas?
Click to expand...
Click to collapse
I can used adb devices to see my connected htc magic.... but other function permission not allow...
Is this thread in the Dream Forum a path to follow to try, or just a good way to brick your Magic? I haven't fully read through it to see if this is to keep root, if you already have it and flash the Rogers Dream ROM for data/ or to regain root if you flashed the official Rogers RUU with a Dream. The post says should work on all Rogers phones, but i feel a brick coming on for me.
http://forum.xda-developers.com/showpost.php?p=5480955&postcount=416
Hi all
I feel like i am going round in circles trying to get my 32b magic rooted. Ive tried all sorts of methods even buying relentless rooter magic, but after lots of helpful emails i was told i have a perfected spl1.33.0007.
I was then told my problem would be solved by creating a gold card. I did this following the unlockr guide. Then went back to trying to use relentless rooter but I still cannot get the phone rooted.
I would appreciace any guidance at this point as I really dont know what else to do. Some of the help people give is great but it assumes a certain level of android knowledge that I have not got and will not ever have.
Thanks in advance fellas. I hope you can help as I love my phone
Regards
Del
have you tried follow these instructions?
http://forum.xda-developers.com/showthread.php?t=548218
to make sure your not on perfect spl.
for rooting check this thread
http://forum.xda-developers.com/showthread.php?t=547133
then you should be able to fix it
Sorry to be stupid but where do i get the following from?
* an non-perfected SPL (preferably an engineerings SPL).
* a ROM with a version that is HIGHER than your current ROM version.
Im sure this is all straighforward stuff to all you guys who do this all the time but it just seems like one obstacle after another for me
Thanks again for the help
i don't know much about the 32b version, but the second thread i posted to you is the one to use, try read very good the first post in it, cause the first thread i posted he tells 32b user to go to the second thread, so try study the second thread thats what i can do to help, hope you find something in it.
Again please excuse my stupidity but i have not a clue what ROM is appropriate for my phone. This is the problem that I always encounter, that others assume that your level of knowledge is comparable to theirs. I know im not a total moron but this is a whole new language to me and the last thing i wanna do is ruin my phone. It seems the more i read on forums etc the more i get confused as there are a seemingly infinite array of different methods to get your phone rooted.
well can you provide info on which spl radio you have now first?
He mentioned in the original post he had perfected spl1.33.0007.
How about telling us what you did with the goldcard process, what happened and what went wrong? Any errors received that you can tell us etc will help us to help you.
just wondering cause he messed with the phone after getting the info of perfected spl so just wanted to be clear what there is to work with so he can get a working good phone
I followed the gold card process on the unlockr webby and all went fine. No issues there at all.
Im now stuck as to what to do next. I bought relentless rooter software and the guy on support has been helpful. Just wondering what my next port of call should be. Like I said im no Mr Android but Im not totally clueless either. I would just like it if someone could tell me what should be the correct/best/simplest procedure for getting my phone rooted and getting the best/closest ROM to 2.0/2.1
Sorry to be a pain but there is so much info out there its really difficult to determine whats right and whats wrong.
BTW Ive got 2 magics so if a totally brick one, Ill know to definitely stop. Unfortunately they both have the same spl
Thanks again in advance
Just tried another method from the relentless support. Ive put SAPP.nbh on my goldcard and restarted with vol down and power. Tried to apply the image and got an error of
model id incorrect!
Update fail
Do you want to reboot device?
any more advice please?
first off im not trying to be a **** here... but..if your having this much trouble rooting, and you admit you dont know much, then why are you bothering rooting??
if you root and get a custom rom on your phone, you will NEED to know how to update said rom, as you will not get support from your carrier.
rooting is not hard, there are MANY guides out there that hold your hand and walk you threw rooting, installing rom ect ect...
for you i would recommend cyanogen mod (www.cyanogenmod.com) JUST because it is stable and works great.. i dont think you want a rom like super d , cdsi , fasttest or something like that where you will probably have to update your rom somewhat often.
please see this guide and READ it fully, its not hard to understand or to follow....just make sure you are on a 32B, if you are not then this guide will not work..
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
also you are looking for a rom that is 2.0/2.1, first off they are not fully functional, there are issues with all 2.0/2.1 roms out there (some are great dont get me wrong, but in my mind not fully functional) so again i would recommend cyanogenmod its based on 1.6 but has bits and pieces of eclair(2.0) in it. before you try a 2.0/2.1 rom i would say get root first, run cyanogenmod and go from there..
again.. im not trying to be a ****.. but it really isnt hard rooting.. and hearing you say you dont know anything is kind of rediculous.. i came into the android scene not knowing anything, its easy to learn if you want to, if you want the easy way out without learning then dont root...
edit: Im sorry i sound harsh, but i still stand behind what i said.. please please please try the cyanogenmod wiki guide, and also please post EXACTLY what sys ver your running, which carrier your on, and confirm please the SPL..
i started out knowing nothing too, but reading and do what guys say in their guides gets you far, and when keep wanting to tell in every post (i know nothing) is kinda saying, don't use custom roms cause if something goes wrong, you will be more fustrated and angry on the android system (also not trying to be rude, but think about it, do you really want to root?)
In the normal course of events I am capable of following the simple instructions found on forums like this to do whatever I need. In the past I have chipped my xbox and flashed my 360, but I am really struggling with my phone. The reason I went for the relentless piece of software was because it was supposed to be simple.
As far as I was concerned I was having a problem following the instructions until I was told I had a perfected SPL. Thats why I had so much difficulty in the past getting it rooted. I thought using relentless might help me out in that respect. It didnt.
So I then find out that I need to create a gold card. Got that sorted ok, then proceeded with the root process. All systems stopped again as I get model id incorrect error. I posted on here to see if anyone else was having the same problems and would be willing to help.
I am really thankful for the suggestions so far and if anyone has any more I will endevour to use them. But my main problem is that there is so much info out there its difficult to work out whats right and wrong especially if you are encountering problems like I am. Ive seen many videos and read many tutorials on how to root so I know it should be straightforward but that has not been my experience thus far
have you tried the wiki link i posted??
start over.. forget everything you have done.. and try that wiki link..
again we need to know your phone model, carrier, spl and sys version(android 1.5, 1.6, ect ect) to move forward if you still are stuck..
Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it
also see this
http://forum.xda-developers.com/showthread.php?t=640229&page=2
delboypb said:
Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it
Click to expand...
Click to collapse
You need to make certain that your gold card was made properly. My first attempt at making a goldcard failed for no reason what so ever. The second attempt went fine on the same micro sd card. I would follow the directions of using Flashrec. That process has been flawless due to the fact that it takes advantage of a bug in Android 1.5. It's easy as long as your goldcard was made properly. Good Luck
p.s. once your able to flash an engineering/non-perfected spl, Leave It Alone.
I had the same problem with mine, couldnt find a guide that works on a uk Voda Magic
I used this and it worked great:
http://wiki.cyanogenmod.com/index.p...o_CyanogenMod#Spanish_Vodafone_1.6_NOT_rooted
Use the guide for Non-TMobile 32B Magics
sapphire pvt 32b ship s-on g
hboot-1.33.0007 (sapp30000)
cpld-10
radio-2.22.23.02
jul 31 2009, 15:49:25
main version is older!
update fail!
do you want to reboot device?
action yes
power no
tmobile mytouch 1.6 just a regular mytouch not 1.2 ( fender)
i had rooted about 12 mytouch ( tmobile usa) and never had any problem till now,
i did the gold card using theunlockr how to.
and i still get the same error.
not know what to do to get this done.
i just can't downgrade to 1.5.
thanks.......................................
I finally pulled my head out of my ass last night/early this morning and got a handle on what i needed to do. And now I have a rooted magic with a shiny new hero rom on it. Very pleased with myself. Now off to try to get the second one done. Fingers crossed
Thanks everyone for all your help and patience. Its really appreciated
Back to square 1 again. After the excitement of havig a working root and displaying a rather lovely hero rom, I though all was well. So I decided to have a crack at rooting my other magic. During the process which was unsuccessful this time my original rooted decided to shut itself down for no apparent reason. Whe i tried to reboot it would get to the splash screen and no further even though it had been working perfectly happily just hours before.
Any help please?
The details are:
32b ENG S-OFF h
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
I rooted using the gold card method and flashed with a hero rom. All the instructins taken from theunlockr.com as I couldnt get the cyanogen wiki instructions to work.
I did try the cyanogen wiki method having already rooted using gold card, but that phone also stops at the splash screen after flashing bot images. I waited several times for 15mins+ but nothing
I would really appreciate some help mainly on my first issue
Thanks in advance
Hi,
My phone was working fine till i tried to revert to old radio and spl to use the superD rom. Ive used many roms and all works fine. When i did the revert my recovery stopped working, so i tried going back to the higher radio and spl and still my recovery doesnt work, i press home and end call and insteasd of going to recovery it just sits there with the htc magic logo for 5 mins then reboots and loops. I have no OS on the phone now so I cant boot into O/S or recovery so I thought id try to install an RUU that I know lets me change the SPL and radio. I thought the only way would be in fastboot so I went into fastboot and loaded the RUU in windows and get the errors "the ROM update utility cannot update your android phone" and
"please get the correct ROM update utility & try again". Now my fastboot has a little picture of a processor(I think) with a red cross through it and now I cant even change the SPL or radio as I keep getting the error "FAILED (remote: signature verify fail)" this is so frustrating and I really need my phone . I am not smart enough to fix this so if someone could PLEASE help i would be greatly appreciative, thanks.
In fasboot I have the little processor photo with a red cross and the following info.
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008(SAPP10000)
CPLD-12
RADIO-6.35.08.29
Nov 3 2009, 15:56:29
***Update***
Now I can only get into fastboot, even when I just turn the phone on. Please view this link of the photo of my phone to see what I mean, thanks.
http://i43.tinypic.com/2n1ylwk.jpg
I dont think you bricked it as long as you can enter fastboot..
Actually I dont know what you should do.. hopefully someone can help you.
Good luck
Screwing around with different radio versions almost guarantees a bricking if you don't know what you're doing.
I got your fastboot info, but what exact phone is it?
MicroMina said:
I dont think you bricked it as long as you can enter fastboot..
Actually I dont know what you should do.. hopefully someone can help you.
Good luck
Click to expand...
Click to collapse
Hi MicroMina,
Thanks for the reply. I hope someone can help me too im really stuck here. I have attached a photo in my first post, not sure its even fastboot anymore I can access
kbeezie said:
Screwing around with different radio versions almost guarantees a bricking if you don't know what you're doing.
I got your fastboot info, but what exact phone is it?
Click to expand...
Click to collapse
Hi kbeezie,
Its a HTC Magic 32A. I got it on a plan from Three(hutchinson) Australia.
My phone was working fine up until I used the radio and SPL for this topic
http://forum.xda-developers.com/showthread.php?t=605239
I was trying to downgrade(revert) when the problem happend. Updating/reverting had the same outcome which is where I am at now, thanks
ddmmh said:
Hi kbeezie,
Its a HTC Magic 32A. I got it on a plan from Three(hutchinson) Australia.
My phone was working fine up until I used the radio and SPL for this topic
http://forum.xda-developers.com/showthread.php?t=605239
I was trying to downgrade(revert) when the problem happend. Updating/reverting had the same outcome which is where I am at now, thanks
Click to expand...
Click to collapse
Well you can probably try to revert the phone back to it's original RUU:
http://forum.xda-developers.com/showthread.php?t=659403
There's a Hutchinson, Au one on the list.
kbeezie said:
Well you can probably try to revert the phone back to it's original RUU:
http://forum.xda-developers.com/showthread.php?t=659403
There's a Hutchinson, Au one on the list.
Click to expand...
Click to collapse
Hi kbeezie,
Thanks for the reply but I already tried to do that but i keep getting the errors "the ROM update utility cannot update your android phone" and
"please get the correct ROM update utility & try again". . Long story short up until 3 days ago I was using the Aus hutching RUU from that post. It was unhackable up until 2 days ago when there was a solution for the spl.0009-0010. I applied the method to revert to a non perfected SPL( i believe its called) i had root/recovery.. i even played around with a few roms but ultimatley i wanted to use the superD rom so I had to revert back to an old radio and SPL and thats when all this nightmare began, any other suggestions?? or any other info I can provide for you? Thanks.
ddmmh said:
Hi kbeezie,
Thanks for the reply but I already tried to do that but i keep getting the errors "the ROM update utility cannot update your android phone" and
"please get the correct ROM update utility & try again". . Long story short up until 3 days ago I was using the Aus hutching RUU from that post. It was unhackable up until 2 days ago when there was a solution for the spl.0009-0010. I applied the method to revert to a non perfected SPL( i believe its called) i had root/recovery.. i even played around with a few roms but ultimatley i wanted to use the superD rom so I had to revert back to an old radio and SPL and thats when all this nightmare began, any other suggestions?? or any other info I can provide for you? Thanks.
Click to expand...
Click to collapse
If you had it working... why did you bother to flash the radio?
kbeezie said:
If you had it working... why did you bother to flash the radio?
Click to expand...
Click to collapse
Because to run the superD rom you need to have old radio and spl. As soon as I went to revert i started having the problems of not getting into recovery and the phone hanging on the htc magic and rebooting in a loop. At that point in time the fastboot didnt have a lock on it(see picture in first post) When i tried to use the RUU is when I REALLY started having big problems and the fastboot had that little lock image and now the only thing the phone does is go into fastboot no matter if i power on or hold home and power or volume and power... hope this sheds a bit more light on the situation thanks
ddmmh said:
Because to run the superD rom you need to have old radio and spl. As soon as I went to revert i started having the problems of not getting into recovery and the phone hanging on the htc magic and rebooting in a loop. At that point in time the fastboot didnt have a lock on it(see picture in first post) When i tried to use the RUU is when I REALLY started having big problems and the fastboot had that little lock image and now the only thing the phone does is go into fastboot no matter if i power on or hold home and power or volume and power... hope this sheds a bit more light on the situation thanks
Click to expand...
Click to collapse
I never had to deal with the RUU screen, and googling isn't revealing any new info. There's a good chance you effectively bricked the phone. The only other thing I can think of in regards to RUU images, is if perhaps the phone wasn't originally intended for Australia (as such would be a different RUU image).
kbeezie said:
I never had to deal with the RUU screen, and googling isn't revealing any new info. There's a good chance you effectively bricked the phone. The only other thing I can think of in regards to RUU images, is if perhaps the phone wasn't originally intended for Australia (as such would be a different RUU image).
Click to expand...
Click to collapse
Hmm i see, does the SPL or radio determine this? Because like i said earlier I was using the latest RUU for hutchinson AUS which installed fine so I believe thats not the issue, the only problem was the perfected SPL which was finally cracked a few days ago. I never thought id actually brick my phone. Do you think theres nothing I can do? I tried googling a locked fastboot with no results either, is this the first problem of its kind that you know of?
While in fastboot; can you see the device from adb devices?
The safest thing to do would be to go back to the provider's code... just make sure it is the one for your model.
Carlos1970 said:
While in fastboot; can you see the device from adb devices?
The safest thing to do would be to go back to the provider's code... just make sure it is the one for your model.
Click to expand...
Click to collapse
Hi Carlos,
No I cannot see any devices when i CMD adb devices
When you say go back to the providers code do you mean the RUU? If so then ive tried this without success(last one not original). If not can you explain what you mean? thanks
...and you have the SDK and USB drivers installed; correct? I run WinXP and the ADB driver was not automatically installed; had to be installed manually.
"fastboot devices" should work; does that one show anything?
Wow, amazing. Don't try to help when you yourself are not completely sure about what you are saying.
ADB will NEVER recognize your phone in fastboot mode - hence FASTBOOT commands were created!
do "fastboot devices" while in fastboot , not "adb devices"
eyegor said:
Wow, amazing. Don't try to help when you yourself are not completely sure about what you are saying.
ADB will NEVER recognize your phone in fastboot mode - hence FASTBOOT commands were created!
do "fastboot devices" while in fastboot , not "adb devices"
Click to expand...
Click to collapse
The problem of course is those who don't know what they're talking bout wouldn't know that?
And yet they talk. (not directed at Carlos, he did in fact tell the OP to try fastboot devices as well, only later)
OK so I mispoke... The point I was trying to make was that the USB drivers had to be properly installed to get any output out of ADB.
Either through adb devices or fastboot devices it would be good to know if there is any comm over the usb port. If so; the best thing to do might be to reflash the provider's code.
So back to the issue. I found this thread from earlier in the year; I didn't go through all the messages but it is your same problem.
"My HTC Magic Stuck in RUU Screen after failed ROM upgrade"
Search for thread 625604
Hope it helps.
Carlos1970 said:
OK so I mispoke... The point I was trying to make was that the USB drivers had to be properly installed to get any output out of ADB.
Either through adb devices or fastboot devices it would be good to know if there is any comm over the usb port. If so; the best thing to do might be to reflash the provider's code.
So back to the issue. I found this thread from earlier in the year; I didn't go through all the messages but it is your same problem.
"My HTC Magic Stuck in RUU Screen after failed ROM upgrade"
Search for thread 625604
Hope it helps.
Click to expand...
Click to collapse
Hi Carlos and everyone thanks for your input.
I read through that post and all related posts but there wasnt really much of a solution.
I CAN access fastboot devices so i tried to flash a recovery via fastboot it starts to write then I get an error "FAILED (remote: 12 signature verify fail).
I think because I have S-ON? So i was thinking if there was a way to turn S-OFF would I be able to flash a custom recovery via fastboot??? Cheers
BUMP ^ ^
$20 into paypal account for anyone can give me a solution to fix this 100%.