Database Info

Palm pre rom / theme

After much digging and digging, I cant seem to find the glorious palm pre rom any where! I've seen videos for it on youtube and that about it. I searched the forums here and google. Found nothing!
I currently have Qteks Hero rom installed. I don't have any weird issues with it besides it being stupid slow, and tolerable with touchflo turned off. I would like to check out a speedier rom.
If that doesn't work, Im seriously debating about going back to googles official cupcake since there "flan" update is just around the corner!
Where can I find the palm pre rom for 32b?

MurderDeathKill said:
After much digging and digging, I cant seem to find the glorious palm pre rom any where! I've seen videos for it on youtube and that about it. I searched the forums here and google. Found nothing!
I currently have Qteks Hero rom installed. I don't have any weird issues with it besides it being stupid slow, and tolerable with touchflo turned off. I would like to check out a speedier rom.
If that doesn't work, Im seriously debating about going back to googles official cupcake since there "flan" update is just around the corner!
Where can I find the palm pre rom for 32b?
Click to expand...
Click to collapse
Probably not around these forums..

Probably not going to find it anywhere, because palm threatened to sue people for that theme

ExTREmE99 said:
Probably not going to find it anywhere, because palm threatened to sue people for that theme
Click to expand...
Click to collapse
I did read an argument about that, but I would have suspected that it would have been around. What would you suggest besides Hero ROM? IMO its a little wonky, and it see,s like that for everyone else to.

I dunno; I've been running evil hero 1.8 since it was released a few days ago, and have had no issues with it (it actually seemed smoother than the actual Hero hardware that I played with earlier today!)

In before a passing mod napalms this thread.
Joking aside, if you're not running Cyanogen, you're only running your device at about half capacity. Hero roms are very pretty and all, but not usable in my opinion for daily phone use.
There are many themes over in the Dream theme forum which will work fine over the top of Cyan on a Magic. I recommend the community Hero theme, glossy edition.
If all you've ever run is stock and Hero, you'll be in for a treat with that combination. In fact (blowing my own trumpet here) grab my mods to the browser (see my sig) and you won't be missing much from Hero at all.

Loccy said:
In before a passing mod napalms this thread.
Joking aside, if you're not running Cyanogen, you're only running your device at about half capacity. Hero roms are very pretty and all, but not usable in my opinion for daily phone use.
There are many themes over in the Dream theme forum which will work fine over the top of Cyan on a Magic. I recommend the community Hero theme, glossy edition.
If all you've ever run is stock and Hero, you'll be in for a treat with that combination. In fact (blowing my own trumpet here) grab my mods to the browser (see my sig) and you won't be missing much from Hero at all.
Click to expand...
Click to collapse
Bit of a disservice to JACxRom's dont you think?

Loccy said:
In before a passing mod napalms this thread.
Joking aside, if you're not running Cyanogen, you're only running your device at about half capacity. Hero roms are very pretty and all, but not usable in my opinion for daily phone use.
There are many themes over in the Dream theme forum which will work fine over the top of Cyan on a Magic. I recommend the community Hero theme, glossy edition.
If all you've ever run is stock and Hero, you'll be in for a treat with that combination. In fact (blowing my own trumpet here) grab my mods to the browser (see my sig) and you won't be missing much from Hero at all.
Click to expand...
Click to collapse
I searched the dream theme forum for "community Hero" and couldn't find the theme you are referring to, do you have a link?

shizzyraw585 said:
I searched the dream theme forum for "community Hero" and couldn't find the theme you are referring to, do you have a link?
Click to expand...
Click to collapse
Thusly:
http://forum.xda-developers.com/showthread.php?t=541242
As for jacxrom v Cyan, in my humble opinion it's no context - although both are infintely better than running stock.

Here's a thought.
Possibly put in a formal request...other than Palm's infinite power to file a lawsuit for anything looking too similar; there isn't much to worry about.
I think that a fully fashioned Palm Pre theme would be pretty kick ass.
(Just my opinion folks.)

Ok, So the "Community Hero" looks awesome! Im cunfused on how to load the theme on my MT3G 32B. Do I apply it like I did Qtek? (Flash, Partition the drive into 3, load rom as updat.zip?

Loccy said:
In before a passing mod napalms this thread.
Joking aside, if you're not running Cyanogen, you're only running your device at about half capacity. Hero roms are very pretty and all, but not usable in my opinion for daily phone use.
There are many themes over in the Dream theme forum which will work fine over the top of Cyan on a Magic. I recommend the community Hero theme, glossy edition.
If all you've ever run is stock and Hero, you'll be in for a treat with that combination. In fact (blowing my own trumpet here) grab my mods to the browser (see my sig) and you won't be missing much from Hero at all.
Click to expand...
Click to collapse
I have to completly disagree with you on the Hero is not usable every day. I have used a version everyday since June on my G1 and now everyday for that last month on mytouch with no issues and I use one of these phones everyday. Browser, Texting, calls, widgets, everything.

I second that hero is nice but not for My everyday use, especially when dealing with tons of emails and needing a bluetooth head set to talk.

OP PM me for your original request. Seems like its about to turn into UFC rom fight in here

MurderDeathKill said:
Ok, So the "Community Hero" looks awesome! Im cunfused on how to load the theme on my MT3G 32B. Do I apply it like I did Qtek? (Flash, Partition the drive into 3, load rom as updat.zip?
Click to expand...
Click to collapse
Right.
Do a wipe, including your sd card
Flash cyanogen 4.0.4
Let it boot once
Flash the theme over the top of it (do NOT wipe)
And you should be good to go.

Dream devs have a Hero 2.1 dump er,... rom!

Update!!!
Looks like Drizzy and the Dream boys unwatermarked the dump and made a G1 rom out of it. I will try to talk to Drizzy and ask if I can have the unwatermarked dump but if not we should be able to re-port this back to CDMA and possibly have Hero 2.1. Just remember this wont work as well with our phone as the official one will but a little taste of an Eclair might be good
http://forum.xda-developers.com/showthread.php?t=592568
Hey guys, didnt know if anyone saw this yet but the Dream devs have a Hero 2.1 dump. Drizzy got it and is sharing it with a couple devs but no Hero devs. Not sure why yet but Im trying to find out. I would assume it's because of watermarking and once they get that worked out then they will release it to us. Some of the Dream users don't like us because we have more ram than them (yes, thats the only reason why) but the devs over in the Dream scene are overall good guys. Drizzy, KingClick, BarakInFlorida, Crykowski and the rest are all good guys so I'm sure once they work things out we will get ahold of it. Lox_Dev (from GSM Hero) is already trying so, let's hope and pray.

Does this mean that HTC already has sense skinned on top of 2.0?? If so, does the Hero 2.1 dump you are talking about mean that we could have Sense on 2.0 before its even officially released by HTC? (And even modified and optimized on top of that?!!!) I'm really excited if any one of your answers will be "yes".
I'm new to all this stuff, but I'm really enjoying it so far! Thanks in advance for answering my questions. God bless!
-alex

alexthearmo said:
Does this mean that HTC already has sense skinned on top of 2.0?? If so, does the Hero 2.1 dump you are talking about mean that we could have Sense on 2.0 before its even officially released by HTC? (And even modified and optimized on top of that?!!!) I'm really excited if any one of your answers will be "yes".
I'm new to all this stuff, but I'm really enjoying it so far! Thanks in advance for answering my questions. God bless!
-alex
Click to expand...
Click to collapse
Yes, pretty much. First, I just want to say that Sense is not a "skin" it is an application but more than that, it is an application framework built by HTC. That said, it looks like HTC has created a Sense for Android 2.1, which hasnt even been released yet and someone from the inside of HTC leaked it out. Now, a Hero guy (E2K) was able to get it from Drizzy apparently but we are still waiting to see if he actually got it or is bsing us.
Also, please note that usually when an HTC dump is leaked this means that it is pretty close to release. They are just sending out to testers and fixing all the bugs. This means that HTC could be giving us a Christmas present soon. Also remeber though that after HTC releases it, Sprint still needs to work their "magic" into it so it may take a little longer than normal. Also, if your phone is rooted us devs will want to make sure nobody loses root in upgrading.

OMGAD release it then ! now

thanks for clarifing
dude thank you. im so tired of everyone calling "Sense U - fu*king - I (USER INTERFACE) its a app. Just like the Adv Launcher. If you dudes could get your mind over having some cool ram additive, rather than all the ammenities of the Dream, than you would realize that you could be running 2.0 like the rest of us, rather than 1.5, and have waaaay more bad ass **** on ur phones!
Examplessss
CubeUI - Samsung Behold 2
TouchWizUI - LG EVE
SenseUI - Hero, Rooted g1's
AndroidUI - Dream, Droid, ADP1, Rogers Dream, Etc....
See its all just a different setting for a different phone .. All thus running on Android OS. Its rather simple. LOOK OUT FOR 2.1

Thanks for the answers! That's great news! I'm rooted and flashed running FRESH 0.6. I plan on NOT getting Sprints update when it comes out, but getting it from you XDA guys in some optimized/tweaked ROM without all the crap they put in to bog it down. I'm so pumped! Thanks again for the answers! God bless!
-alex

georgegreco86 said:
dude thank you. im so tired of everyone calling "Sense U - fu*king - I (USER INTERFACE) its a app. Just like the Adv Launcher. If you dudes could get your mind over having some cool ram additive, rather than all the ammenities of the Dream, than you would realize that you could be running 2.0 like the rest of us, rather than 1.5, and have waaaay more bad ass **** on ur phones!
Examplessss
CubeUI - Samsung Behold 2
TouchWizUI - LG EVE
SenseUI - Hero, Rooted g1's
AndroidUI - Dream, Droid, ADP1, Rogers Dream, Etc....
See its all just a different setting for a different phone .. All thus running on Android OS. Its rather simple. LOOK OUT FOR 2.1
Click to expand...
Click to collapse
Well just because we have Sense doesnt mean we can run other roms. In fact we cant. I have tried porting over tons of different roms to Hero and they never seem to work. Sense is good too. Personally, I prefer it over Vanilla Android. Plus, the HTC apps such as messaging and whatnot are better in my opinion. Personal preference. Once optimized, Rosie flies. Sense isnt bad. I just wanted to say it's an application. Not a skin or anything.
Regardless, hopefully we will have 2.1 soon

sounds Great Im excited...God Bless

Is it really that simple though? I imagine the dump is based off the Euro(GSM) Hero.

Natty_lite said:
Is it really that simple though? I imagine the dump is based off the Euro(GSM) Hero.
Click to expand...
Click to collapse
Most likely is. But 1.6 on up has native CDMA support. Either way, Lox from the GSM dream forums says that the guy who leaked the rom to us just will not give up his source which means that if we do get this we cant release anything. Looks like we are gonna have to wait a few weeks anyway. I also was reading that Drizzy just wasnt thrilled with this build. As it is beta (or *gasp* alpha) there is too much that isnt working. Good news is we know it's coming.

http://twitter.com/Official_Drizzy/status/6156799589 "Official RUU for WWE Hero 2.1....."
Hmm.. does this mean we could possibly see a build for our CDMA Hero sooner than we thought?

Exciting news! I'll be watching this thread closely for any updates. Also, like others have said, I will be coming here for an optimized/bloatware free 2.1 from one of the awesome devs who do great work for our Heros!

chuckhriczko said:
Most likely is. But 1.6 on up has native CDMA support.
Click to expand...
Click to collapse
What does this mean for us? The possibility of cross-platform roms?

Dunno if this has already been posted:
Screenshots

Yeah I really can't wait for that landscape mode on home menu

ruskiyab said:
What does this mean for us? The possibility of cross-platform roms?
Click to expand...
Click to collapse
Possibly, yes. One of the reasons it is so hard to port over roms to our phone is because it is CDMA. 1.5 does not have CDMA built in. For instance, try porting over any GSM rom and it wont work because HTC "hacked" in the CDMA support (i.e. built a custom driver). Since 1.6 and up have built in CDMA support the possiblity for us to make cross platform roms is a lot higher. Not saying definite. Just more possible.

chuckhriczko said:
Possibly, yes. One of the reasons it is so hard to port over roms to our phone is because it is CDMA. 1.5 does not have CDMA built in. For instance, try porting over any GSM rom and it wont work because HTC "hacked" in the CDMA support (i.e. built a custom driver). Since 1.6 and up have built in CDMA support the possiblity for us to make cross platform roms is a lot higher. Not saying definite. Just more possible.
Click to expand...
Click to collapse
Is there something "missing" from Google's 1.6 or 2.0 sources that a build of either of those prevents the CDMA Hero from running them at all? Or will they at least boot up and work with some stuff not working?

I tried installing it on my Sprint hero, well not 2.1 but the 2.0 that works on the gsm, it doesn't work.

chuckhriczko said:
Possibly, yes. One of the reasons it is so hard to port over roms to our phone is because it is CDMA. 1.5 does not have CDMA built in. For instance, try porting over any GSM rom and it wont work because HTC "hacked" in the CDMA support (i.e. built a custom driver). Since 1.6 and up have built in CDMA support the possiblity for us to make cross platform roms is a lot higher. Not saying definite. Just more possible.
Click to expand...
Click to collapse
Yeah. The kernel. I tried booting both but neither even bootup.

you still need to compile the hero cdma radio driver for android 2.x

MyTouch Fender/1.2 ROMs (3.5mm jack)

Alright so it's been a couple of weeks and anyone can see that the Nexus is casting a shadow over the new MyTouch so it's probably not going to get much attention from Cyanogen. We can still use his roms however we lose touchscreen support. Actually, we can use pretty much any rom as the old MT3G and G1 can use but we can't use the touchscreen.
What I've tried was pulling the /system/usr directory, flashing a CM rom and pushing the directory back but it still didn't make any difference.
I've tried flashing the Cyanogen ROM then flash the boot.img from the Fender ROM but I forgot that the current SPL (1.33.0013) is locked. Another obstacle. So I replaced the boot.img in the CM rom with the Fender and of course it didn't work. I'm out of ideas... but I'm far from being a dev. But there are a lot of you smart guys out there. Has anyone broken any ground on these devices? Now that the original MyTouch is obsolete it's only a matter of time that the popularity of this device will grow since the MyTouch (original) is more popular that the G1 to date.
In conclusion I see two options from here:
We cook a custom MT3G 1.2 ROM from source (whereever that could be found).
We work together to discover a workaround for this touchscreen issue to allow us to use CM ROMs (perferred).
So far the only ROM for the new MT3G 1.2/Fender is an odexed stock rom from http://forum.xda-developers.com/showthread.php?t=623141 (thanks CursorDroid) and the only method of rooting is by goldcard methoddiscovered by Crypysmoker.
If there are any others can you please post them.
I would really like to see the development for this device take off and I'm sure that it will eventually. Themes, kernal mods, custom roms, tethering, overclocking, a2sd, etc and I'm sure that I'm not alone.
Thanks.

I would love to see this phone get some attention. I call it my poor mans nexus

Has anyone tried adb pulling the touchscreen kernel module from stock and inserting it into a modded ROM to see if it even loads?
/system/lib/modules only has wlan.ko
It looks like the driver might be tied to the kernel so a new kernel is needed

robkoehler said:
I would love to see this phone get some attention. I call it my poor mans nexus
Click to expand...
Click to collapse
LMAO!! Even though I don't have one and don't intend to get one cause I'm satisfied with my original MyTouch, ROM development is always encouraged. the more ROMs, the better!

epeets said:
LMAO!! Even though I don't have one and don't intend to get one cause I'm satisfied with my original MyTouch, ROM development is always encouraged. the more ROMs, the better!
Click to expand...
Click to collapse
Unfortunately, the more ROMs the more confusion.
Now that we have two different MyTouch verions (not including the 32a/32b for the original) this is going to get VERY confusing. It already is. Even if you use "1.2" people are going to wonder if that's the ROM version or the phone version. Maybe MT3G2 or something.

tepic said:
Has anyone tried adb pulling the touchscreen kernel module from stock and inserting it into a modded ROM to see if it even loads?
/system/lib/modules only has wlan.ko
It looks like the driver might be tied to the kernel so a new kernel is needed
Click to expand...
Click to collapse
And thus we need a dev. LOL. Unless someone can tell us what controls the touchscreen input. That might give us a step in the right direction.

I'm still hoping for Cyanogen ROMs on the Mytouch 1.2.

Lol since im the one who even discovered the pain staking rooting process ... omg such a pain... I felt the need to comment.
I just today started using my fender over my G1 because Criffmon (however the hell you spell it) came out with the themed stock rom. It looks perfect.
But the reason for no rom yet is the kernel tied into the new touchscreen drivers and 3.5mm jack. There is a whole new touchscreen which is why it doesnt work when u load other roms.

Binary100100;5694320
So far the only ROM for the new MT3G 1.2/Fender is an odexed stock rom from [URL="http://forum.xda-developers.com/showthread.php?t=622530" said:
http://forum.xda-developers.com/showthread.php?t=623141[/URL] (thanks CursorDroid) and the only method of rooting is by goldcard method.
If there are any others can you please post them.
Click to expand...
Click to collapse
What bout this post though?
http://forum.xda-developers.com/showthread.php?t=623141
That's what I rooted my Fender with. (downgrading of course done with the link you provided)

crypysmoker said:
Lol since im the one who even discovered the pain staking rooting process ... omg such a pain... I felt the need to comment.
I just today started using my fender over my G1 because Criffmon (however the hell you spell it) came out with the themed stock rom. It looks perfect.
But the reason for no rom yet is the kernel tied into the new touchscreen drivers and 3.5mm jack. There is a whole new touchscreen which is why it doesnt work when u load other roms.
Click to expand...
Click to collapse
Of course. How rude of me. Sorry Crypysmoker. I'll update the op.

kbeezie said:
What bout this post though?
http://forum.xda-developers.com/showthread.php?t=623141
That's what I rooted my Fender with. (downgrading of course done with the link you provided)
Click to expand...
Click to collapse
Yeah that's the rom that I used too... maybe i got my links confused.
That rom is odexed. I managed to de-odex the apps but I can't figure out the framework. I would like to add things like the modified browsers, dialer, contacts, mms app, etc. But I am unsure if it can be done because of the odex.

Binary100100 said:
Yeah that's the rom that I used too... maybe i got my links confused.
That rom is odexed. I managed to de-odex the apps but I can't figure out the framework. I would like to add things like the modified browsers, dialer, contacts, mms app, etc. But I am unsure if it can be done because of the odex.
Click to expand...
Click to collapse
Ahh I see. (runs off to google 'odexed' )

crypysmoker said:
...I just today started using my fender over my G1 because Criffmon (however the hell you spell it) came out with the themed stock rom. It looks perfect...
Click to expand...
Click to collapse
Link please?
EDIT: ahh... did you mean this? http://forum.xda-developers.com/showpost.php?p=5665902

Binary100100 said:
Link please?
EDIT: ahh... did you mean this? http://forum.xda-developers.com/showpost.php?p=5665902
Click to expand...
Click to collapse
wow that looks sweet!!!...

So according to tmonews the MyTouch 1.2 is sold out and anyone interested will have to wait until this Spring to pick theirs up.
Then I noticed an interesting tweet from Haykuro:
"just realized something. The Nexus One and the N900 are amazing phones and a whole bunch of people have it but you NEVER see anyone with it."
So let's get this straight... the newest MyTouch is sold out and all of the devs (like Cyanogen) are rushing to develop firmware for a device that isn't anywhere near as popular. Meanwhile... what has been accomplished with the new MyTouch?
What's wrong with this picture???
Has anyone made any progress at all lately?

there's loads of things wrong with that. but sadly when your a gifted developer you have the right to develop for whatever device you want, even if loads of people won't be using it.

Aeikozz said:
there's loads of things wrong with that. but sadly when your a gifted developer you have the right to develop for whatever device you want, even if loads of people won't be using it.
Click to expand...
Click to collapse
I understand all that but my point is out of the hundred of thousands of devices sold there isn't ONE person out there that tried to develop a rom for it and share it? There are over two dozen people (at LEAST) in this forum that has the phone and not one of them possess the skills to at least figure out how to use a CM rom on the device? Really? Why is that so hard for me to believe?
I'm not saying that I can do better because I know that I can't... but I also don't have any coding experience either. It would appear that all the T-Mobile customers with coding experiences decided NOT to buy this device for some reason. Or they decided to buy it... but not try to improve on it in any way.
You know that if Haykuro or Cyanogen had the phone we'd be on the twelfth rom version by now. C'mon devs! I'm still using my G1 if I want to show off the power of Android. I want to retire this device already.

Binary100100 said:
I understand all that but my point is out of the hundred of thousands of devices sold there isn't ONE person out there that tried to develop a rom for it and share it? There are over two dozen people (at LEAST) in this forum that has the phone and not one of them possess the skills to at least figure out how to use a CM rom on the device? Really? Why is that so hard for me to believe?
I'm not saying that I can do better because I know that I can't... but I also don't have any coding experience either. It would appear that all the T-Mobile customers with coding experiences decided NOT to buy this device for some reason. Or they decided to buy it... but not try to improve on it in any way.
You know that if Haykuro or Cyanogen had the phone we'd be on the twelfth rom version by now. C'mon devs! I'm still using my G1 if I want to show off the power of Android. I want to retire this device already.
Click to expand...
Click to collapse
No no.. You have it a bit wrong. Wes and Ctso were/have been working on it trying to get the kernel into Open eclair.
The main problem is those 3 drivers we need for the touch screen and 3.5 jack seem to be a super pain in the ass to extract from the current kernel to push into another or build a new one all together. Basically, the drivers can be seen, but not used.
ALL 32a roms will boot on the fender/mytouch 1.2, I have tried literally 10 pages of them.... Bu the moment it looks for a touch screen, all it sees is the track ball and defaults to it. YOu can fully run other roms, but you cant touch. They are trying lol, But were basicly gona have to deal with criffmon's themes for now since 2.1 will be on us in the next few weeks. Supposedly, we are getting the full 2.1 since these are 32a boards.
People are trying, But think of this as a first, NEW release in a long while.
I mean hell, it took me 3 days just to figure out how to root it, when the nexus 1 took maybe a few hours with ways already known.
It will come, be patient. The moment I get a working kernel I will let everyone know.

Hey Crypysmoker!!! Thanks for all the hard work on this!

It's good to know there are people working on this device.

[REQ] Droid Eris for 32B?

The only version is Kingz and all of his work seems to have sync issues on my MyTouch 3G as well as many Force closes (Not dissing his work because he puts alot of hard work into it). I just want a 32B (MyTouch/G1) Release of the Droid Eris Rom like maybe the Super-Hero rom for 32A.
Thanks You
Tre

It will come....

check the g1 forum. king just posted his port of the eris rom. if it works on g1 it should work on the 32b.

My phone always has sync issues with kings work... read my post

Azuske said:
My phone always has sync issues with kings work... read my post
Click to expand...
Click to collapse
I second that, any of kink releases seems to work properly on my device..
Waiting for a suitable Droid Eris for my 23B (New Sense + Android 2.1, woooaaaaaaaa)

When the 32A mod is done the 32B one will be worked on by devs who know how to fix those problems (mainly ahmgsk). Until then just hold off.
I think this rom will be painfully slow though. Better off waiting for OpenEclair. Next release for that looks to be solid, if not very close.

kings latest droid eris rom works amazing on my mytouch

that would be awesome qtek!

yea it would be amazing if QTEK made his own Droid dump...
I did finally get the King Eris rom working but it got slower and slower so I have to wait for his release to become stable or for someone else to release the eris rom of their own

Azuske said:
yea it would be amazing if QTEK made his own Droid dump...
I did finally get the King Eris rom working but it got slower and slower so I have to wait for his release to become stable or for someone else to release the eris rom of their own
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=642643
read the WHOLE thread,download the patch update.zip,apply it and BAM!!
the only thing missing is camcorder, and there are a few (minor) bugs. but it's still in BETA!!
check it out.it flies on my mt3g 32b._________________^

1wingangel said:
http://forum.xda-developers.com/showthread.php?t=642643
read the WHOLE thread,download the patch update.zip,apply it and BAM!!
the only thing missing is camcorder, and there are a few (minor) bugs. but it's still in BETA!!
check it out.it flies on my mt3g 32b._________________^
Click to expand...
Click to collapse
what patch update? lol its the same King Eris rom we been talking about... we are waiting for a update on the rom to make it more stable or waiting for another Dev to make a more stable version

It would be nice to have sense ui + 2.1 w/o the need for a ext partition. A2SD is pretty useless on these phones.

I'm not dissing your ablilty to flash roms correctly but the sync issue never happend to me i flashed it like 3 time. had to go back to my dialy use rom only b/c of sleep death and about the force closes he states on the web page that your ext MUST BE EXT4. or fource closes will occur. JUST SAYIN

iv had kings droid version for 4 days now and its the most stable 2.1 rom iv used
also iv flashed the 2nd vegaman update which fixed couple of issues and im really satisfied with it. the only problem is the caller lag..the phone rings but you cant see who is calling you for few seconds but that shall be fixed soon enough.
if you follow kings thread you will see alot of happy mt3g users which have almost fully functioning rom.
and also read all the flash instructions if you do decide to go ahead and flash the rom.

[GINGERBREAD] Android 2.3 port from SDK for 32A/NR.

I made it for fun and it is NOT usable and will not be before we get official source
http://saraev.ca/signed_120810_223045.zip
working:
- data/radio (no incall microphone)
- wifi
not working: everything else
please do not report bugs. I know whats not working but can fix NOTHING for now

Good job. IMO these ports will be unusable for the next few months until cyanogen comes up with a release.
It was like that with eclair and later froyo. History tends to repeat itself.

Woot Woot, Hopefully once we get the source this can become stable. The magic lives on. Not many froyo builds I tried for the 32a werent that easy on battery life. Hopefully this turns out good. Hope the devs will work together to create a stable rom, instead of having their own builds with pros and cons.

If 2.3 ever starts working on 32A + NR, I am jumping ship asap! I miss vanilla android

eyegor said:
Good job. IMO these ports will be unusable for the next few months until cyanogen comes up with a release.
It was like that with eclair and later froyo. History tends to repeat itself.
Click to expand...
Click to collapse
There is no beginning no end. We are never be alone
HTC planning any updates in the future for "oldest" device? :/

eyegor said:
Good job. IMO these ports will be unusable for the next few months until cyanogen comes up with a release.
It was like that with eclair and later froyo. History tends to repeat itself.
Click to expand...
Click to collapse
I would have to agree with you except for I think I read on Cyanogen's twitter page that they will NOT be supporting first gen devices after CM6.1 which I assume meant NO ported 2.3 for us.
Hopefully I am wrong.

where is that quote? can't see it

good job!!!!!!!! hahahahaha

Did anyone1 tried on OR and cm Bcrook kernel???

i want to make a team for dev this rom to work full on magic..contact me..

nice hopefully it will fully work

Download does not work?

Really impressive work Hope to see this fully working.

what changes are needed for this to boot on 32b?

This is all well and good and I'll try it if I get my repaired phone back and can once again have a spare to play with.
However is it reasonable to expect this to ever be usable? We don't seem to be able to get a fully working 2.2 under the new radio so why would 2.3 ever get enough attention or drivers? I used 2.2 for a long time on the old radio but I really needed to use the new radio and have since gone back to 2.1 since it is now my daily driver again.
This will be great fun once I can put the Magic back to dev use.

I tested this on my g1, with a pershoots kernel over top so that it boots. And I was wondering how you got wifi to work? I tried replacing many things, but still get an error starting wifi supplicant daemon on logcat.
Just curious, not like I expect anything to ever become usable haha

studjuice said:
I tested this on my g1, with a pershoots kernel over top so that it boots. And I was wondering how you got wifi to work? I tried replacing many things, but still get an error starting wifi supplicant daemon on logcat.
Just curious, not like I expect anything to ever become usable haha
Click to expand...
Click to collapse
hm did you replace wlan.ko ? you should
also take a look at init.sapphire.rc:
Ive changed wpa_supplicant service a little because wlan_loader is not used as in eclair/froyo roms. my *wpa_supplicant.exec* loads the firmware and then starts *real* wpa_supplicant.
I realy dont have an idea whether firmware & tiwlan.ini are different for trout/sapphire. if they are you can edit wpa_supplicant.exec to load propper firmware files..
EDIT: this will not be usable untill we get gingerbrad sources published by google. then maybe cyanogen will do a build for us. I heard he will not support sapphire/trout anmore and if and *only if* it is true I will try to make a working one. I hope it isn't true and cyanogen will still suport our devices because he can do it better than me for sure

saibot64 said:
where is that quote? can't see it
Click to expand...
Click to collapse
twitter.com/cyanogen/statuses/8805829046177792
twitter.com/cyanogen/statuses/10393734621433856

*bump* any news, updates, anything?
found this
http://phandroid.com/2010/12/15/gingerbread-source-headed-to-aosp-soon-now-the-real-fun-begins/
Hopefully we can get a working build, dont wanna let the magic die.

Porting
Anyone done any work porting this? I'm currently working to compile this for my fender. Hopefully with the new radio. Which I've read doesn't work, so... anyone found a working one? I'm running eclipse to compile but if you'd like to help, let me know what you use and I'll send you what I've got.