problems with Rhodium and Activesync - General Questions and Answers

I have the following problem with my HTC Rhodium. Here is the description, I hope someone will be able to help me
- I have installed a ROM with a beta version which has just expired (I did not realized it was due to expire when I Installed it)
- I am trying to install another ROM but I cannot astablish an Activesync connection. I guess this is because the software has expired.
- So I cannot install the ROM and I cannot access the software.
Any hint?

I suggest to place your question here http://forum.xda-developers.com/showthread.php?t=550540 or in the thread where you got your beta ROM

Related

Anyone with Helmi Cooked Rom able to connect their Blackberry Connect?

I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...
I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?
paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.
Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.
tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.
By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.

RUU_Pharos_HTC_WWE-ME_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship & HTC_ARA...

On my HTC Page appeared a HTC Pharos in Reg History but i havnt registered one
I also got access to this Official ROM Update (WM6)
Release Date: 2008-08-04
(Englisch)
http://rapidshare.com/files/1255888...E_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship.exe
(Arabic)
http://rapidshare.com/files/125591670/RUU_Pharos_HTC_ARA_1.14.415.5_4.1.13.59_03.15.90_BLUE_Ship.exe
Have Fun
PS:
Here the offical text/instructions by HTC:
Code:
New features and improvements are available with this operating software update.
Installation Instructions:
Before you proceed, please confirm that this software upgrade is a newer version than what is currently installed on your device. If it is the same version and your device is operating normally, there is no need to reinstall the software.
To check what version is installed on your device, click Start > Settings > Device Information > Version tab, and note the ROM version, CPU, and Radio version.
Warning!
* This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
* Please note that this upgrade will erase any data stored on the device.
Please back up your data first before upgrading your device. Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following:
* The USB sync cable is connected to your device and PC. If your PC is running Windows XPR, ActiveSyncR will run automatically to establish a connection. If your PC is running Windows VistaTM, then Windows Mobile Device Center will establish the connection between your device and PC.
* All running applications on the device have been closed.
* Make sure that the battery level of the device is least 50% (tap Start > Settings > System tab > Power).
* The update will take up to 30 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the device from the PC, or press any buttons until the process has been completed.
Once the RUU is downloaded, launch the application on your PC and follow the instructions.
Thank you scilor
No Problem, if I get access xD
I didnt have registered a Pharos on HTC but there is one registered ^^
thnx for the post! dont know if this is a newer one than the one that came with my phone...
Has anyone flashed it?
It is the official from the HTC Website!
I did FLASH...it is OK..
Flashing is OK.... All function working fine. There is 'Copilot' in the ROM, too.
Windows mobile 6 or 6.1 ?!!!!
How are build?
Thank you!!!
Hoangdat_vista said:
Windows mobile 6 or 6.1 ?!!!!
How are build?
Thank you!!!
Click to expand...
Click to collapse
mobile 6.0
Do you have acess to the spanish rom?
t it is possible to have the French version as impossible to save my pharos buy from orange on the site htc
d thank you in advance
bita said:
Flashing is OK.... All function working fine. There is 'Copilot' in the ROM, too.
Click to expand...
Click to collapse
is no necesary jump and hard spl ?
Thank so much
is this the relased version Date: 2008-08-04 ? tks
THX! Mate~
I have no access to other roms i am sorry
EDIT: HTC Text added
I did FLASH...it is OK..
Flashing is OK.... All function working fine.
But I need to replace English menu with French...
Regards

HTC Touch Pro/Raphael: Need Emulator Images for Windows Mobile 6.1 Build 19965.1.2.3

Apologies to the mods if this belongs in the Raphael section.
I'm a software developer and I'm trying to find emulator images of the OS that ships with the HTC Touch Pro/Raphael in South Africa.
One of our clients is experiencing a problem running our software on his device. An error message pops up saying that our software was designed to run on a more recent compact framework than what he has installed. The target framework for our program is CF 3.5. I talked the customer through installing CF 3.5 on his device, but the error message persists. Following exactly the same steps, I experience no problems running our software on the emulator images in the following paragraph. This leads me to believe that there might be something odd in the particular build on the client's device.
He said that he hasn't done anything to his device with regards to upgrading or modifying his device apart from what I've talked him through. The specific build number of the OS on his device is 19965.1.2.3. I've downloaded the WM6.1 (build 19202.1.0.0) and 6.1.4 (build 20757.1.4.0) images from Microsoft, but I can't replicate the client's problem.
Where can I download images for build 19965.1.2.3? Do any of you have any other ideas of what might be causing this behavior?
Thank you very much.
*bump**bump*
This DOES belong either in the Raphael section or in the Q&A section.
I will move it to the Raphael section and if you wish, post it in the Q&A section as well.
GDILord said:
Apologies to the mods if this belongs in the Raphael section.
I'm a software developer and I'm trying to find emulator images of the OS that ships with the HTC Touch Pro/Raphael in South Africa.
One of our clients is experiencing a problem running our software on his device. An error message pops up saying that our software was designed to run on a more recent compact framework than what he has installed. The target framework for our program is CF 3.5. I talked the customer through installing CF 3.5 on his device, but the error message persists. Following exactly the same steps, I experience no problems running our software on the emulator images in the following paragraph. This leads me to believe that there might be something odd in the particular build on the client's device.
He said that he hasn't done anything to his device with regards to upgrading or modifying his device apart from what I've talked him through. The specific build number of the OS on his device is 19965.1.2.3. I've downloaded the WM6.1 (build 19202.1.0.0) and 6.1.4 (build 20757.1.4.0) images from Microsoft, but I can't replicate the client's problem.
Where can I download images for build 19965.1.2.3? Do any of you have any other ideas of what might be causing this behavior?
Thank you very much.
Click to expand...
Click to collapse
It might be worth getting them to install the .Net Configuration utility. That will tell them which versions of the Compact Framework are installed (to confirm that 3.5 is installed properly), and they can specify which applications use which version.
Cheers,
Steve
Thank you for moving this nir36. I would love to post it in the Q&A section too please. Should I do it, or will I get into trouble for posting the same request in multiple forums? If so, could you please do it for me?
Thanks for the upload Steve. I'll give it a try.

Office mobile 2010 beta expired: Help please!

Hi guys!
I've got Cracings ROM running on my HTC TP and when loading that rom there was only the Office mobile 2010 beta in the package so of course, I installed it, now when I'm trying to open any docs it says it has expired and that I need to uninstall and install Office mobile 2010 from Windows Marketplace.
Thing is, nothing happens when I try to reach the Marketplace, tried to uninstall it, installed it again but no luck...
Any hints on how I can solve this issue, I really need to get my docs opened!
Cheers /Robban
The Beta has expired. You cannot re-install it.
Try and find an Office 2007 CAB on xda-devs and install that instead. Or if the ROM came with Office, just use that .
Dave
where could i get the unexpired version?
You need to flash a rom with the newer version (that's not time-bombed). I think around 23521 or a little earlier the time-bomb was removed. Or, download a build and make yourself a cab from the sys packages. I doubt you'll find a cab for it.
Thx for trying to help me out guys!
I'd rather wait to re-flash it a while so if anyone have a fresh working link to a office 2007 I'd be very happy, I've searched for a few days now but only dead links...
Cheers /Robban

Easy ROM APA Sprint 6.5 1.00

Hey all- I been futzing around with BL, drivers, WMDC USB on/off, etc trying to get 6.5 on my Sprint Apache BL1.00. Gal on PPCG made me ROM that works fine, loads easy - bootloader, usb in, run!
See http://forum.ppcgeeks.com/htc-apach...tinkerbells-21916-apache-rom.html#post2058845
The user has been working on installing Windows Mobile 6.5 on their Sprint Apache device. After experimenting with various drivers and other configurations, the user was able to successfully load a ROM created by a member of the PPCG forum community. The link provided leads to the forum post where the ROM is available for download, along with instructions on how to install it.
it seems that the user has been trying to install Windows Mobile 6.5 on their Sprint Apache device. After some trial and error with different drivers and configurations, the user found success by using a custom ROM created by a member of the PPCG forum community. The link provided leads to the post where the user can download the ROM and get instructions on how to install it on their device.

Categories

Resources