Hi
I am using mw600 over x1 and encountered few draw back .. These are ..
1). Song details are not shown
2). manilla music tab/ Nitrogen doesn't support forward/ back buttons / play/pause
3). sometimes its hard to connect bnluetooth if its been turned off.
Is anyone having solution for any of Stated above ?????
Moved as not software release.
Related
Hi all! I have an xdaiis & its running o2 1.40. I often listen to music whilst out however haven't found a way of listening to media player but not allowing the unit to function by an accidental tap of the screen or a button, and pressing power stops media player too. Is there a way of stopping this?
Thanks
Leo
You could use one of the many software tools available to lock your PDA until you unlock it via a specific combination of keypresses - I had one on my own XDA until I hard reset it - can't remember what it's called right now, but the icon is just a yellow padlock.
listening to music with your device off
Leo,
I accidently found the solution to your problem !!
Start the media player and then press the centre button of the navigation pad to black out the screen. The media player will continue playing songs without the device coming alive by accidental pressing of button or tapping on the screen. To bring it back, press the centre button of the navigation tab again.
Try and see if it works for you.
Anil
XDAIIs
The Action button (centre D-Pad) on my 2i switches between play and pause in my install of Windows Media Player 10, just for the record.
Turn display off
go to wmp settings or options and navigate to buttons.. assign a button for display toggle.. Tat solves u
Thanks for your help guys!
Unfortunately the screen toggle only works with the screen & my buttons are still activated which my krussel case always presses against.
Anyone know of a way of stopping the buttons too? It's crazy that it has been designed this way!
Thank you
Leo
splonker said:
Thanks for your help guys!
Unfortunately the screen toggle only works with the screen & my buttons are still activated which my krussel case always presses against.
Anyone know of a way of stopping the buttons too? It's crazy that it has been designed this way!
Thank you
Leo
Click to expand...
Click to collapse
Try DeltaLock. It's very small and simple, and does just what you're looking for.
ramjet73
Thanks!
Problem is solved! Thank you ramjet73, Carty, christopherwoods & phantom1261 for your help! Now i can easily listen to music without being charged because GPRS connects!
Thanks again!
Leo
Is there a way that the media player stays active after the keypad is locked? I' m using the Treo 750 with a bluetooth headset (a2dp works fine). As soon as I lock the keypad the player stops. Could not find any option to change this.
I would also like to know if there's a solution.
Try Scrnsaver.exe [taken from PHM PowerToys] it powers down the screen and locks the keys [D-pad center opens them up again], in other words it keeps the device ON while turning the Display and Keys Off [read: battery saving]. I use it when listening to music via A2DP.
VJDeviceLock
I found a fine solution in the meantime. VJDeviceLock does the trick and works great with the Treo:
http://www.vijay555.com/index.php?Releases:VJDeviceLock
Hi all,
I've been running TNT 1933 Touchflo for a few of days now, and everything works like a champ.
I do have a question though regarding bluetooth with MS Voice Command 1.6. When I click the button on my bluetooth headset, the phone screen (dialer) comes up, but that's all that happens. I read around, and saw that I may need to change some registry entries. However, my registry entries seem fine:
HKLM\Software\OEM\Voice Command\Path = \Program Files\Bluetooth Voice Command\BTVCBasic.exe
HKLM\Software\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = \Windows\btagext.dll
I ran the program in the Path of the voice command (manually, just by clicking the file), and it did exactly what I needed it to do. The only problem is, that program isn't run when I click the button on the headset. I have a G3 Wizard, IPL/SPL 2.26 with 2.19.11 radio rom (not that it matters). Any suggestions?
Much appreciated.
Up you go! (aka, *bump*)
Come on guys, some of you gurus know this.
Aww come on.
I have At&t Tilt & a Jabra 250v bluetooth headset
Everyone says if I want to Listen to my Videos or Music
I need to get a Sterobluetooth for it
But I was listen to my Videos & I dont know how but could hear its audio
on my Jabra 250v & I know its not a Stereoheadset,
But it happpend,
Ca someone Help me
I want to know how it is possible & how i could set it
cos i dont like the stero headset, & be walking with 2 headphones on each ear
I prefer not to carry around a extra stereo headphone
& use just one,my Jabra 250v
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
I'm also running a Wizard paired with a Jawbone and am currently flashing over to NBD 8.3. I would rather use BlackDiamond 3.1, but it seems that Voice Command doesn't like BD. I may just end up cooking my own ROM that will work with VC, I just wish BD would. It's a stable ROM (once you kick some of the bugs out), and I like the "wow" factor of the Cube when ppl check it out...
dasaint said:
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
Click to expand...
Click to collapse
Hi,
Thank you for that, my buttons are set up precisely like yours.
By phone screen, I mean the one with the TNT logo at the top left-hand corner, along with a headset icon. This is the same thing that pops up when I click the green phone button. Note that this is NOT the voice command mic icon. When I click the button on the headset, I want the mic icon to pop up and take a command.
Any suggestions?
I've installed the latest PocketMusic Player software (v5.0.6) on my XDA Orbit with Windows Mobile 6.0 (http://www.pocketmind.com/).
The programme was installed successfully but doesn't work as expected.
The problems I have are:
1) Red 'END CALLl' button doesn't work when the PocketMusic is on. (but it worked fine on my previous XDA Mini S with Windows Mobile 5.0)
2) The "OK/CLOSE" button doesn't work when the Pocket Music is on. (It worked fine on my previous XDA Mini S with Windows Mobile 5)
3) Navigation button ('scroll wheel and mouse' in XDA Orbit) work on PocketMusic only to switch tracks and
turn up/down the volume. In my previous XDA Mini S with Windows Mobile 5.0 I could use navigation button to
look for tracks in the playlist (scroll up and down). This function doesn't work in Windows Mobile 6.0
I can only switch tracks in the playlist by using the touch screen.
4) When the PocketMusic is on and when I go back to the desktop (by minimazing the PocketMusic using touch screen) the
navigation button still doesn't work.
It still works for PocketMusic, so I can change tracks and turn
up/down the volume but I cannot do anything else using navigation buttons unless PocketMusic is off.
(again I want to point that I didn't have such problems with XDA Mini S & Windows Mobile 5.0)
5) PocketMusic stops playing music when it finishes the current track (instead of jumping to another track from the playlist). This usually happens a few days after installation of the program. It that case, the only way to fix it is to re-install PocketMusic...
I've tried installing different versions of PocketMusic player: v4.0.3 ; v4.3.4 ; v5.0 ; v5.0.4 but none
of them worked fine.
Only version v4.3.4 works better than other versions in a way that:
- red 'END CALL' button works when the PocketMusic is on.
- OK/CLOSE button works when the PocketMusic is on .
But yesterday it got worse (see point 5).
5) PocketMusic stops playing music when it finishes the current track (instead of jumping to another track from the playlist). This usually happens a few days after installation of the program. It that case, the only way to fix it is to re-install PocketMusic...
Is Windows Mobile 6.0 'somehow' not compatibile with this PocketMusic?
Why it works perfect with Windows Mobile 5.0 and doesn't with WM 6.0?
Do you have similar problems with Pocket Music on your mobile?
Does anyone know how to solve the problems described above?
I would really appreciate your help
Cheers,
i've the problem n5, with last release 5.2 and other old version...
Does anyone recognize these problems I have with PocketMusic 5.2 on a HTC Kaiser (TyTN II) running WM 6.0:
(1) After succesfully playing the first track (mp3) in a playlist, the second song breaks up terribly. A few milliseconds of the song is played, it then pauses for a second, then another few milliseconds are played and so on.
(2) Using the Next / Previous button while playing causes PocketMusic to freeze up completely when having my Kaiser connected to a bluetooth device (car stereo). A soft reset of my Kaiser is needed to terminate PocketMusic. I've already tried changing all the options in the player but it didn't help. Even removing all the key mappings didn't help. BTW:
- Doubleclicking a different track in the playlist while playing doesn't result in errors and changes to that track without any problems.
- The Next / Previous buttons work flawlessly when NOT connected to a bluetooth device or when NOT playing.
(3) Hardware keys (up/down/left/right/action) don't work at all. Furthermore the key mappings screen doesn't seem to detect pressing any of these hardware buttons.
Surely there are more fans of PocketMusic 5.2? Don't you have any problems?
----- [edit] -----
I just tried out the demo of the paid version (5.3.1). That one didn't have the breaking up problem and the track changing problem. The hardware key problem however wasn't solved.
----- [second edit] -----
I've found the solution to the hardware key problem: CHECK IT OUT!
Hi all!
I have an xdaiis & its running o2 1.40. I often listen to music whilst out however haven't found a way of listening to media player but not allowing the unit to function by an accidental tap of the screen or a button, and pressing power stops media player too. Is there a way of stopping this?
Thanks
Check out slide2unlock. You can set it so that it locks the device and turns off the screen a few seconds after running. I know someone who runs one of the earliest versions on a wm2003 device for exactly this reason, or if you are running wm5/6 (I have no idea what o2 1.40 means), then the later versions of s2u2 will work fine.