A couple of weeks ago my screen started to disalign...
This is Rom persistent (it happens with many roms WM6 and WM5).
If i run the screen aligment wizard it`s ok for some time but starts to disalign.
Anyone, any ideeas?
The original Cingular wm5 rom had this alignment problem, I flashed NBD's WM6 v5.1 rom and it was fixed. I tried other wm6 roms with mixed results, some would get misaligned, others alignment stays perfect. Anyway the NBD rom just works, improves battery life and speed.
http://forum.xda-developers.com/showthread.php?t=299821
I just got the HTC touch pro a few weeks ago, and probably my biggest problem is with opera. the first time I load it after a reset it is always fine... but the second time the "HTC" splash screen is always CENTERED on the screen half overlapping the start bar, and takes about 10 times as long to load opera itself. Not sure why... any clues from anyone?
I'm using official australian 3 rom.
many thanks
Exact Same problem here - bump!!!
Anyone have any idea on why this occurs and how to fix?
Lee
why not just update to the latest version of Opera? I believe the latest build is 2808. I use it and have no problems
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
I have noticed that qutie often, I get a long delay when trying to open Excel or Notes and also when saving files in those applications. The timer wheel just sits there turning for minutes on end. Eventually it seems to sort itself out, but it can be very frustrating if you are trying to look something up quickly. It doesn't always happen, and a soft reset seems to help. Has anyone else had this problem? Does anyone know how to solve it?
Thanks in advance for any help anyone can suggest.
I have an HTC Touch Diamond P3700 running WM6
Rom Version is 1.37.405.1.WWE 6.12.08
Radio is 1.00.25.03
Protocol 52.26a.25.09H
I have touch flo disabled
Hello everyone,
First of all thank you to all the dedicated developers here! I am not technical enough to contribute...
I have a P3450 which I upgraded to WM 6.5 - the same problems with screen freezes and system crashes still exists after the upgrade, so the device is more or less not usable (every reboot takes at least 10 attempts). Therefore, I wanted to turn this into a android and installed Wing-Linux 0.4.2 per the guides on this board.
I now encounter a different problem. The screen starts flickering every now and then. This can only be resolved by a reboot. With the reboot issues mentioned above, this is also not a good option yet.
I was wondering if I need to define a different video/display mode in the default.txt to resolve this. Can anyone help? Has anyone encountered the same problems?
Thanks!!