I'm having a strange issue trying to flash any WM6.1 ROMS. Anytime I flash a WM6.1 ROM, the installation goes through fine, but when it comes to the stylus align screen there is nothing displayed, just a white blank screen. I have to tap the screen for the manually for the crosshair to appear, then I'll get through the calibration; however, the ROM won't display any backgrounds or pictures. The only WM6.1 ROM that I can get flashed without any issue is the WM6.1 WWE 3.03.405.0 radio sign 25.70.40.02 1.64.06.04. I've tried searching for align bug/align error, but no avail. Does anyone have any knowledge on this subject or a thread that I could be pointed to?
Thanks in advance.
-Ken
Are these the custom ROM's you're trying from Dutty and Alex or are you just trying to flash the "OEM" ones?
customs ROMs
BUMP.....102 views and no one has any suggestion?
Hi, small question - every wm6 rom I install results in a small colored band (approx .5mm wide) at the top the screen, above the start menu etc.
Only happens with wm6 roms, and does not seem to matter which wm6 rom. does not on wm5 at all.
lexx0 said:
Hi, small question - every wm6 rom I install results in a small colored band (approx .5mm wide) at the top the screen, above the start menu etc.
Only happens with wm6 roms, and does not seem to matter which wm6 rom. does not on wm5 at all.
Click to expand...
Click to collapse
LOL
Sorry for laughing. It's a battery status. you will note it will get shorter throughout the day, Wtasks has it in preferences or under your windows/startup look for a battery meter loading.
It doesn't come with wm6, it's there because the chef added it.
rofl...
thanks though
Lol... I was confused about that at first when I started using wm6 roms too. I really kind of like it though!
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
First, I want to thank everyone on this forum for being so active and dedicated! I can say without doubt that you guys are the main reason I chose the Fuze as my new smartphone.
I just got my Fuze yesterday, and it was working great (if a bit laggy) on the stock rom. I then installed hardSPL and ' ROMeOS conFUZEd AT&T edition' without any problems. But shortly after that, I noticed that the colors started acting strangely. It almost looks like when you're running windows in 256 bit color mode. There are no smooth gradients. But even more strangely, these color 'bands' rapidly shift around, making most of my screen appear as though it's flickering.
I tried Da_G's latest rom, then went back to the stock rom and stock SPL. But this didn't fix it. I tried taking a screenshot of it with CapScrUtil, but when I view the images on my computer they look fine.
This all leads me to believe it's a hardware problem and I should take it back, but it is kind of suspicious that it started after flashing the rom. Just checking if you guys have any suggestions.
Thanks!
I can not find very many people with this problem, let alone a fix. I tried two different WM6.5 and Manila 6.5 ROMs and both of them took sometimes up to 10 seconds for the screen image to refresh to the current time, message count, etc. Anyone else notice this, and know what causes this. I've gone back to Manila 6.1 for the time being, where this issue does not exist.