Database Info

AJZ Hero Speedup Script

if you want a certain script added, chances are some1 else does too. if you have an idea, or find a script you want added, please either post or PM me. i take a look at this thread alot throughout the day, so i will be able to see your ideas quickly. YOUR IDEAS ARE IMPORTANT
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.2. - released
i have fixed most of the directories and codes except for Battery fix, i have gotten the HTC camera to work, read the readme file
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #8 once it is up, it is not done yet
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
____________________________________________________________________________________________
version 0.2 - http://www.4shared.com/file/113524687/c98398cd/AJZ_HeroSpeed_02.html
very minor changes
fixed the scripts
working on a battery fix
version 1.0 will be more compatible with JAChero 1.8, i expect to release that in the next few day, but this might not be possible because i'm going on vacation
_____________________________________________________________________
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/113343120/6c89dd65/AJZ_HeroSpeed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
____________________________________________________________________________________________
version 0.1 - http://rapidshare.com/files/247165073/hero_speedup_2.0_AJZ_0.1.zip
here's a mirror of 0.1 http://www.4shared.com/file/113320662/7e513586/hero_speedup_20_AJZ_01.html
in version 0.2, expect to see support for the deletion of htc sync, and support for changing your lock screen

can you please include instructions for mac users? thanks good work

did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?

I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?

Franklees said:
did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?
Click to expand...
Click to collapse
i got all the commands and everything working in 1.72 except for #2 to work. #2 will cause a boot loop.
#2 just deletes your htc sync, which idk what it does anyways.
in 0.2, i will try to fix this, as well as add support to change your lock screen
i got the change lockscreen part in, now just gatta see the problem with htc sync

juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows

alexjzim said:
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows
Click to expand...
Click to collapse
so if put the optimize.sh file in my sd how do I run it? or is the .bat file the ones that needs to be run? thx

juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.

wwwhershcom said:
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.
Click to expand...
Click to collapse
great! that will do it, I appreciate your help

anyone know if HTC pc sync is included in 1.72? if it is, anyone know where it is? once i find this out i can release 0.2.

Wow, this script really made a difference

Henchman said:
Wow, this script really made a difference
Click to expand...
Click to collapse
was aiming for that

juangil said:
can you please include instructions for mac users? thanks good work
Click to expand...
Click to collapse
...Buy a PC lol.

alexjzim said:
was aiming for that
Click to expand...
Click to collapse
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.

jigdagod said:
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.
Click to expand...
Click to collapse
my only suggestion is to wipe and reinstall your ROM, then do everything in order. i cant tell you exactly, because i cant actually see your phone

Okay, thanks I'll try that tomorrow when I get home.

Does this support 1.72 yet?

71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.1. - released
i have fixed most of the directories and codes except for uninstalling HTC sync, and replacing the sapphire camera with the official HTC camera. i have gotten the HTC camera to work before, and just need to add in the right codes
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #2 once it is up, it will cause your phone to boot loop - option #2 is now used to change the lockscreen and is completely usable now
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
PC sync is out of all JAChero builds... i spent hours trying to fix something not there . because of this, the next release will be 0.1.5 instead of 0.2
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/11334312...Speed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
__________________________________________________ __________________________________________

71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
Yes.
That's what I'm using ti with. And it's made Rosie completely usable for the first time for me.

Has anyone had the experience where Rosie was really fast when first optimizing using whatever procedure but then lags down over time? That was what I experienced when using a different optimizer. Hopefully this one is consistent.

All you wanted to know about Android on Polaris and never dared to ask

Just trying to make an easy access to android.
Note Android porting to polaris is under development so some things doesn´t work, versions change quickly (this is not a bad thing!) and sometimes something work for most ppl but not for all! devs may not try to correct this specific issues yet as we are on an early stage and maybe those specific issues get corrected as we advance
Bluetooth not working yet.
LATEST NEWS
-15-09 improved camera quality, should work well now (i still need to start cam on winmo in order to work well)
-Working camera, manual zoom
-Improved battery duration
I´m not a dev, we just need to thank newbie16, bally3, DJ_Steve, dzo, imfloflo...
I think it is impossible that testing this would harm any device, however you do it by your unique responsability

Installing Android with Wifi on Polaris: the easy way updated:15-10-09
0) Delete all android related files before trying the bundle. previous data.img should be deleted
1) Download and unzip android full http://rapidshare.com/files/293363380/android-15-10-09.rar
note that now any bundle can run with wifi on polaris. please check post #4 for bundles
2) Open default.txt and search for "board-htcpolaris.panel_type=1" (it´s a small file)
There are 2 different polaris and you should change this value according to yours.
POLA200 (rounded bottom) 0 or 3 (3 prefered) http://img.gsmarena.com/vv/pics/htc/htc-touch-cruise-01.jpg
POLA100 1 or 2 http://www.infotec-service.com/shop/images/HTC/htcCruise00.jpg
3) Copy the files to the root of your sd card
4) run Haret.exe from your polaris

ISSUES
audio on phonecalls doesn´t work
1) you need to make the first phone call.
2) radio 1.59.xx is recommended
3) even with 1 and 2 some ppl still have problems (me for example)
DETAILS
- basefiles-20091009 , zImage-15-10-09, rootfs 15-10-09 and Ion-v1.5-2009-09-12-sdcard (system)

FLAVORS
- Ion´s Google-polaris-Ion-2009-09-12.rar http://rapidshare.com/files/280093611/Google-polaris-Ion-2009-09-12.rar
(this is devs prefered bundle. if you stay with thisyou´ll probably get more support etc)
- mssmisonpackage-0911.zip (rogers) works FAST.mssmisonpackage-polaris-0911.rar http://rapidshare.com/files/280130360/mssmisonpackage-polaris-0911.rar
(language support .. at least spanish, pdf viewer..and some more goodies)
Won´t give support for other bundles as:
- Hero builds are still "experimental" last one is extremly slow on polaris. not usable
- Other builds aren´t as tested as this and may be more buggy

reserved nº4

reserved nº5

Wow... Nice Thread. Thx

Good thread !!!
Hi Iseeka,
Very good idea to have this thread.
I'm not an expert but maybe it is important to mention that POLA100 devices usually go for panel type 1, while POLA200 devices usually choose panel type 3.
There is some option in the default.txt file to add the APN settings for data connection, but personally this has not worked for me, since still you have to configure these APN settings in Android Settings once booted.
I saw you are still going to add a link for the downloaded file, so I wonder if it is necesary to explain what to do with system.sqsh... I personally dont know, I have only used system.img files but it would be nice to know how to use them.
thanks for this initiative.
JM
EDIT: OK, after my post, the explanation about Panel type appeard, thanks! In my case I identifyed my Polaris as POLA100 because of the label on the handset after removing battery.

@iseeka Nice thread good job all, see u on IRC

imfloflo said:
@iseeka Nice thread good job all, see u on IRC
Click to expand...
Click to collapse
forgot to thank you too

Thanks i hadn't do lot of thing just some haretconsol log and kernel test .
Off for today go to sleep.
Hope this thread will help n00b to install android and will improve the number of people interest on porting android to our device (maybe some devs are here..)

Will try.
Thanks

Hi!
Thanks for trying to keep a clean thread with updates, etc.
Is it possible to have a 4shared link for the files? I can't access rapidshare...
Is it a hero build in your second post or just a cupcake?
If it isn't, do you know if is it possible to make one?
A question for the developers : it's a good thing to keep the system file in .img format I think. When I tried squash fs version, it seemed to be slower.
Do you know if it's only on the Polaris? Because they all use squash fs build on vogue and kaiser...

Wifi not connecting with WPA2 in this build
Hi. I want to report that with this ION build u posted (very good and fast AFAICS) wifi goes ON but I can't connect with my AP protected with WPA2. With Cyanogen with zImage alpha5 and wifi.ko IRQ 18 no probs instead. Later (now I'can't) I'll try this build with that wifi.ko and I'll let u know. See u

mylostnick said:
Hi. I want to report that with this ION build u posted (very good and fast AFAICS) wifi goes ON but I can't connect with my AP protected with WPA2. With Cyanogen with zImage alpha5 and wifi.ko IRQ 18 no probs instead. Later (now I'can't) I'll try this build with that wifi.ko and I'll let u know. See u
Click to expand...
Click to collapse
I think Cyanogen has wifi driver built-in.. (if you talk about bally´s modded cyanogen has driver built in).
Can u please delete wlan.ko, boot again and see if wifi still works? In that case wlan.ko is inside system.img and we have better wlan.ko (18 or the new one wich is better)
If that cyanogen version load the driver from file i´ll update 1st page with your settings

Kiiv said:
Is it possible to have a 4shared link for the files? I can't access rapidshare....
Click to expand...
Click to collapse
I´ll send you a link and to whoever needs it.. i prefer rapidshare so at least i can get some points with this...
Kiiv said:
Is it a hero build in your second post or just a cupcake?
If it isn't, do you know if is it possible to make one?
.
Click to expand...
Click to collapse
I think is 08/08/09 system.img but I´m not sure. This version is used by developers to test as it´s a stable and tested version.
This is the only build with full wifi support. (Bally3 made 2 bundles (cyanogen and another) with wlan.ko inside the build so updates in wlan.ko are missing
Devs are working on 2 more bundles
1 Newbie16 on a hero based (is going to be complex with sd partitioning)
2 DJ_Steve on a donut version (is going to be without partitioning)
Kiiv said:
A question for the developers : it's a good thing to keep the system file in .img format I think. When I tried squash fs version, it seemed to be slower..
Click to expand...
Click to collapse
I think the same and devs knows it, plans are staying at img

iseeka said:
I think Cyanogen has wifi driver built-in.. (if you talk about bally´s modded cyanogen has driver built in).
Can u please delete wlan.ko, boot again and see if wifi still works? In that case wlan.ko is inside system.img and we have better wlan.ko (18 or the new one wich is better)
If that cyanogen version load the driver from file i´ll update 1st page with your settings
Click to expand...
Click to collapse
Hi. Excuse my really bad english. Sometimes I can' express what I think!
So, here are my results (only wifi related):
I've wifi starting and connecting with my AP WPA2 protected with:
1) Cyanogen build from Bally
2) KaiserHero build with sense ui with kernel alpha 5 and wifi.ko IRQ 18
With the ION build u posted in the first post of this thread (without changin any file) my wifi starts correctly but doesn't connect to my AP even if I disable the wireless protection. My phone see the AP but dows not connect to it. I hope can help. Bye-

mylostnick said:
1) Cyanogen build from Bally
Click to expand...
Click to collapse
cyanogen modded by bally has an old wlan.ko ...older than (18), the one in my bundle is the newest
mylostnick said:
2) KaiserHero build with sense ui with kernel alpha 5 and wifi.ko IRQ 18
Click to expand...
Click to collapse
I don´t know about this version. as far as i know the ion build included in my package is the only one that loads an external wlan.ko file.
can you please try if deleting wlan.ko still works wifi? if still works it doesnt load the external one.Or give me link and i´ll check if i can
BTW if it loads external, you can try with wlan.ko and zimage from my bundle (new wlan.ko is improved and also allow to load any compatible kernel)
mylostnick said:
With the ION build u posted in the first post of this thread (without changin any file) my wifi starts correctly but doesn't connect to my AP even if I disable the wireless protection. My phone see the AP but dows not connect to it.
Click to expand...
Click to collapse
I´ll try to ask devs but it´s strange. I think has been tested with protection. they probably want a dmesg log. you know how to do it? If not please search over other advanced threads as this one is intended as an easy access to android.. i will try to help you there too

iseeka said:
Installing Android with Wifi on Polaris: the easy way updated:09/09/09 v2!
1) Download and unzip android full 090909v2.rar http://rapidshare.com/files/277877148/android_full_090909v2.rar.html
2) Open default.txt and search for "board-htcpolaris.panel_type=1" (it´s a small file)
There are 2 different polaris and you should change this value according to yours.
POLA200 (rounded bottom) 0 or 3 (3 prefered) http://img.gsmarena.com/vv/pics/htc/htc-touch-cruise-01.jpg
POLA100 1 or 2 http://www.infotec-service.com/shop/images/HTC/htcCruise00.jpg
3) Copy the files to the root of your sd card
4) run Haret.exe from your polaris
Click to expand...
Click to collapse
after i;ve done all that and start booting into linux (black screen with penguin) it says sd card not found

@syto203 is your phone rom WWE or specific language?

[WORKING!] Android on XDA Orbit 2

Since I posted a thread: http://forum.xda-developers.com/showthread.php?t=675311 and nobody could help me. I spent the past 5 days trying to get it to work and did it successfully (through haret).
Here's how to did it:
1. Download this .RAR I put together that includes:
-Eclair
-haret
-default.txt
2. Edit the "mddi.width=320 mddi.height=480" part of the "default.txt" to your needs. (either 320/480 or 240/320)
3. Put the content of the folder "android-orbit2-eclair" to the root of your SD card so it should be something like this:
Code:
-(D:) SD Card [COLOR="Red"](root)[/COLOR]
--conf
--media
--default.txt
--haret.exe
--initrd.gz
--rootfs.img
--system.sqsh
--zImage
4. Navigate to the SD Card (start>programs>file explorer>storage card) and click on the "haret.exe"
5. Once that has loaded up click "run" (about 3 lines down on right side)
6. Just wait, Give it chance to do its thing and simple... Android running on your XDA orbit 2.
any problems, reply to this thread and I will try to fix.
Thanks, James

it dosent work on my htc touch cruise.
I click on Run, and the screen becomes gradually black, and that finished as that… nothing any more occurs.
The screen is lit, but is black, and nothing occurs.

New problem now: I have the same message than you :
Code:
sh:2: unknown operand
losetup: /dev/block/loop 1: No such file or directory
Failed
Failed to reach system.img on SD card.
Whats the problem ?

nico85 said:
it dosent work on my htc touch cruise.
Click to expand...
Click to collapse
If you read the title it says for XDA orbit 2 not touch cruise.

Have you managed to get gprs/3g working with this? I can't seem to get mobile web working on my XDA Orbit II

I dont know whart u are doing here.
But i can use myns donut and eclair totally easy without modding something.
I just have to use the right "default.txt"...
Most packages you find here habe a "default-polaris.txt" in it or you use the one form myn ... It works great for the orbit 2 too
.....
But maby i dont get what you are doing here.. some special build or something?
BUt running android on orbit 2 is net a problem at all just use right conf.
-----------------------
@moondemon
Wifi works with myns eclair and donut. There are fixes (androidupdate.tar) you have to use (nomorootfs)

could u tell me which version have u installed? 1.6?
I succeeded installing the 1.6 version. but when I was trying installing the latest version, I was stucked at the screen which requires me to long-push the dpad center button. I did it but didnt work. I've even tried every keys, still didnt work.
could u give me a hand on it?

I have tried myn's and default-polaris does not work on my xda orbit 2. Also when I do get haret to run I have had trouble actually getting android to boot due to a continual "power wakeup" message. The default-polaris results in a flashing white screen for me. This config is the only config that actually works on my orbit 2.

Hello, i am just a newbie on Android for Polaris, so plz forgive me dump postings At the moment i am a bit spacy what i have to put together to work Android on my XDA2.
android-orbit2-eclair works on my XDA2 after installing but:
phone can't do outgoing calls:
3G can`t connect,
Cam/Gallery crashes
Wifi works.
Touchscreen works and all the rest.
before i installed the recent builds of froyo and eclair
System shows 10-15 min nice boot flash, then it works, but touch screen doesn`t work.
Anyway all the developers doing a great job here!
rgds Matthias

Im not using sd haret anymore. If you try with nand flash (http://forum.xda-developers.com/showthread.php?t=636024) everything works like a charm.
But as i used haret on my Orbit2 i was good with the package myn offered in her donut(or eclair im not sure).
In the package were a default.txt and a one for polaris/Orbit. I changed the polaris one to default (renaming) and it worked.
I think it was the donut package and it worked with zimages for eclair too.
Try this package if it works its worth a attemp to look into the default txt for other builds.
But atm i would suggest to give android at flash a try. Its almost perfekt for daily use if you not to much with some special programms on winmo.
As far as i read there are problems with haret atm gernerally that programms close even if install is fine.

Seems that flashing is the solution to all my problems, but
can you try to explain what makes the difference between haret and a NAND flash install relatet to the runing system?
Unfortunaley my XDA Obit2 is the carrier of my beloved navigation software. The other Wimo apps are junk compared with android. If there is a offline solution for Car Navigation on android, i could kick Wimo into the trash bin. Also i am a Linux user as well on my PC

Camera and astro application not working
Camera and astro application not working .. please help ...

xda orbit 2
I stuck these sections of

I've tried it and it seems it works, but I have a few questions and one major problem:
1. I installed the systems without the SIM card. When I started it again with SIM card, system says that the PIN I type is wrong altough I know that it's correct. How to solve it? Maybe it is so because I'm not O2 customer?
2. Is it possible to boot Android automatically without flashing NAND?
3. Can I theoretically Install Donut or Froyo using this method simply by putting different Zimage in the folder?
4. Do I have to perform another installation in case of buying a battery of more capacity? I saw that default.txt contains information about the battery.
5. May it work well If I change default.txt to the one prepared by atools?
Thanks for advance and greetings.

Double post, sorry.

running on my pola 200 / orbit2 but very slow i think my sd slow too

cingibi said:
running on my pola 200 / orbit2 but very slow i think my sd slow too
Click to expand...
Click to collapse
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
http://www.4shared.com/file/01Vco3iR/O2_orbit_2_panel_3_HARET_based.html
Click to expand...
Click to collapse

denis__at said:
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
Click to expand...
Click to collapse
Doesnt work for me ive left it about 20 mins and its still just a black screen. The first 1 worked but was slow.

hello, which rom is the best for o2 xda orbit 2 pola 200?

New swype ver from 2.13

Can and chef or anyone that has a stock rom can extract the new version of swype from the new 2.13 Tmobile update rom? I think a lof of us would like to have it as a cab. The new version has the option to enable or disable vib typing, very good feature to have.

romeo0119 said:
Can and chef or anyone that has a stock rom can extract the new version of swype from the new 2.13 Tmobile update rom? I think a lof of us would like to have it as a cab. The new version has the option to enable or disable vib typing, very good feature to have.
Click to expand...
Click to collapse
in the meantime you can use this program. http://forum.xda-developers.com/showthread.php?t=450256 i have used it for some time and love it! it was my solution to the no vibe in swype.

I've had that before, not as good as the one in the new rom.

would love this

http://htcpedia.com/duttys_ime_swype_eb39564dab24a6471/soft/leo-apps.html
not able to test it, cause i am at work.
..but hope that s.o. could tell me, if it's possible to add other dictionarys to swype, like the German one + Germany keyboard layout.
Best regards

worked!
...okay, thought i just take the time for installing it..and it worked!
ive installed it, without deinstalling my old working swype with german dictionary. the old location of swype was Windows/swype.
installed duttys version on the storage card. after rebooting, ive got the new swype version with vibration and fixed problems, like holding keys and getting alternative inputs.

I tried it, works but has same problem as early version of the previous version. I recommend to not install it, it changes your "model name" file under the windows directory to t-mobile leo and could interfere with certain apps or functions that are specific to your carrier. I think this may cause problems with password sign-in too (may result in a hard reset?). Just wait for a reworked version, like for v3.9. Be cautious if u do.

orlandojumpoff said:
I tried it, works but has same problem as early version of the previous version. I recommend to not install it, it changes your "model name" file under the windows directory to t-mobile leo and could interfere with certain apps or functions that are specific to your carrier. I think this may cause problems with password sign-in too (may result in a hard reset?). Just wait for a reworked version, like for v3.9. Be cautious if u do.
Click to expand...
Click to collapse
Just make the installation after a hard reset or a fresh new flash, and you won´t face those issues.

Thanks, let me try it out
Edit: Works fine for me, on NRG rom.

Btw is auto spacing working for anyone? Doesnt work for me it seem.

romeo0119 said:
Btw is auto spacing working for anyone? Doesnt work for me it seem.
Click to expand...
Click to collapse
wokring here for me!

j4n87 said:
http://htcpedia.com/duttys_ime_swype_eb39564dab24a6471/soft/leo-apps.html
not able to test it, cause i am at work.
..but hope that s.o. could tell me, if it's possible to add other dictionarys to swype, like the German one + Germany keyboard layout.
Best regards
Click to expand...
Click to collapse
It works for me... Im going repost this in my sticky if you dont mind. I will keep your URL.

cd993 said:
wokring here for me!
Click to expand...
Click to collapse
What the hell, not doing it for me, let me try to uninstall and reinstall it.

romeo0119 said:
What the hell, not doing it for me, let me try to uninstall and reinstall it.
Click to expand...
Click to collapse
any of you know how to get around the open EnglishUS failed error.. i am on a stock ROM WWE and the swype does install to the program files folder

Athar Mansoor said:
any of you know how to get around the open EnglishUS failed error.. i am on a stock ROM WWE and the swype does install to the program files folder
Click to expand...
Click to collapse
I'm also using a WWE Rom... of Dutty. Installed it on Device or Storage Card?

Ok.. Got it to work..
heres what I did..
Install swype.. it will ask for restart..
Select cancel.. A folder called 'Swype' will be installed to windows..
Copy that folder to program files
soft reset your device..
sywpe will be ready to use..
You can delete the folder from program files once soft reset.
Also this can be done either on storage card or internal device..
both folders must be in same memory location
Happy swyping

Screen does not respond while using Android

I have tried both Incubus26jc's Super Froyo (RLS8) and VaniljEclair RLS7c . I manage to install them in sd card (I want to use them via haret.exe) but when I reach the welcome screen where I have to touch the android to continue, the screen does not respond ( D-pad and center button work). Could someone help me? I decided to open a new thread because of what I have searched, I found only one member with a similar (but not the same) problem
The installation method I follow is this (mostly copied from a SuperJMN's post):
1º Run HaRET
2º From the installer, select Install System
3º Choose install update (if any)
4º Choose to fix permissions (if there had been an update)
5º Reset (don't select "Quit", just reset, this is to avoid problems)
6º Wait for Windows Mobile to start and run HaRET again.

Although I am flashing to nand and you are using haret/zimage, we may have the same problem with the unified touch screen driver that DZO implemented around 16 June. Is there is a way to use the kernel .nbh and system .tar with haret, rather than zimage? If so, you might try using an older kernel from before 16 June ... or perhaps an older zimage.

I have similar problem, if not the exactly the same. Using an older kernel seems to be a workaround of this problem. hxxp://forum.xda-developers.com/showpost.php?p=7041656&postcount=21 (You need to fix the hxxp as appropriate as I am not allowed to link URL yet)

i have the similar problem too, havent fixed it :/

I tried zImage-12-06-10 (the last one before the 16th of June) and installation procedure did not even start. But zImage-29-04-10 worked for me. However, Froyo is not that fast. If I change any files (zImage or something else) is it possible to have a speed improvement?

Same problems.
All Android realeases work on my pola100 only with zImage 29.04.10.
No work with other kernel.
I suggest to developers to analyse 29.04.10 and try to understand WHY this works and others no.
Regards.

regarding screen response, panel and changes on kernel module for touchscreen please see this post from dzo
also check this for solution from k_k
HTH

mensa07 said:
regarding screen response, panel and changes on kernel module for touchscreen please see this post from dzo
Click to expand...
Click to collapse
Those are the changes after which my touchscreen stopped working.
mensa07 said:
also check this for solution from k_k
Click to expand...
Click to collapse
It would be nice if this worked for the Polaris ... how would I change the value of this parameter before flashing the kernel? Thanks!

tmcfarland said:
Those are the changes after which my touchscreen stopped working.
It would be nice if this worked for the Polaris ... how would I change the value of this parameter before flashing the kernel? Thanks!
Click to expand...
Click to collapse
you can use terminal or adb to change the value

files for a fast android version
Could someone with a fast and stable version of eclair or froyo please tell us what files did he/she used to make that happen because I installed incubus froyo build and it is a bit slow? I am talking about installing it in my sd card and run it using haret.exe