Related
This is for developers ONLY.
Do not ask me to send you the dump. It's not yet ported. Therefore it cannot be flashed to your G1, MyTouch, or Galaxy.
This is essentially the HTC Tattoo build that is operating with the "Sense UI" and over the 1.6 Donut firmware.
This latest system dump comes to us from none other than Drake Drizzy Rogers. He is the hardest working man in the game right now. Please, be sure to pay him your respects for this.
Now, having said that...he has already sent this to JAC and cyrowski to be ported for the G1. We simply need someone to lead the charge for "us" Sapphire users.
I'm not going to FILE SHARE the dump w/ a link in this thread for obvious reasons. Follow me on Twitter...we will exchange e-mails, and the file will be sent to you and/or the direct link. Thanks.
www.twitter.com/site_unscene
EDIT: For those developers or future go-getta's that do not use Twitter...this link that follows is the direct link to the dump.
(http://tinyurl.com/lvfq8a)
Oh!! Nice Nice Nice!!! All my respect, can hardly wait!!! Thanks devs, thank you Drizzy!!
"porting" a G1 rom to be used on a G1 is approximately a 5 minute affair at this point. Once JAC/etc releases their Dream/G1 version the 32B will follow shortly.
32A is a slightly different story however, although we can always use an off the shelf kernel until one of the Hero devs actually decides to share their kernel patches or compile a 32A kernel for us.
what's the hardware differences between tattoo and magic 32A!? apart from the screen 2.8 display in tattoo
Thanks guys.
Keep in mind fellas...
This is NOT a ported build just yet. Hence the name, "Raw n' Uncut."
It will only work on the HTC Hero right now. Otherwise, developers need to port this to our 32B devices first, then shortly thereafter, the 32A versions.
Thanks for keeping the thread alive! Folks have a right to know what to be on the lookout for.
at314 said:
what's the hardware differences between tattoo and magic 32A!? apart from the screen 2.8 display in tattoo
Click to expand...
Click to collapse
mostly just ram and radio is different and screen types, i think tattoo is resist. and magic is capac.
HTC TATTO Specs | HTC MAGIC 32A Specs
This is definitely exciting as I have been hoping for a merger of Hero and 1.6 (aka Donut). I'd imagine by the end of the night or first thing tomorrow somebody will port this to 32B. Thanks again to all you cooks, without you are phones are "normal". LOL!
NguyenHuu said:
mostly just ram and radio is different and screen types, i think tattoo is resist. and magic is capac.
HTC TATTO Specs | HTC MAGIC 32A Specs
Click to expand...
Click to collapse
Yes, HTC stated that the 2.8" screen is too small for the capacitive input.
Spoke w/ JAC and cyrowski about this:
They were given the system dump on Wednesday evening. (Two days ago)
So, Lord knows we could be expecting something soon from them for the G1.
As for the Sapphire crowd. Those of us who don't use the G1 anymore, and have a MyTouch, Magic, or Sapphire...will have to wait until a full ported build has been formatted. I am hoping that Setenza gets his hands on this soon, that way we can get "our own" version, as opposed to a JAC/cyrowski port. (Not to say that they don't cook up some excellent stuff.)
Spoke w/ Drizzy:
He said that he has the UPGRADED MARKET and GLOBAL SEARCH up-and-running flawlessly on this build. It's only a matter of time before we see some seriously impressive builds in terms of speed.
I have the source for the codes if anyone wants them, which were provided by a good friend of mine @ www.DroidHeaven.com
I think it's a fake..
Look on the bootscreen, build.prop and the app folder..
yes its fake.
fake !!!! it says cupcake 1.5
Is it really a fake? What a bummer.
The HTC page says 1.6, but all the other review sites say it is running 1.5
theelite said:
The HTC page says 1.6, but all the other review sites say it is running 1.5
Click to expand...
Click to collapse
Tattoo will run 1.6, period.
the tattoo build is using sdk 3 of donut. It's a little behind as donut is now sdk 4.
Sorry folks.
Guys, that post isn't fake. That was the "Tattoo" system dump that Drizzy provided via Twitter a few days ago. I didn't post the build.prop or Donut source codes. Obviously, that's why I insisted that people contact me on their own time. He sent this EXACT file to JAC and CC.
Quit suggesting that it's fake. It isn't. The build.prop file wasn't hosted, nor the code sources.
I didn't mean to mislead you guys.
For what it's worth, he's almost done the Donut Hero build, and JAC is working on his too. Something will be ready for use soon.
Reignzone said:
Guys, that post isn't fake. That was the "Tattoo" system dump that Drizzy provided via Twitter a few days ago. I didn't post the build.prop or Donut source codes. Obviously, that's why I insisted that people contact me on their own time. He sent this EXACT file to JAC and CC.
Quit suggesting that it's fake. It isn't. The build.prop file wasn't hosted, nor the code sources.
I didn't mean to mislead you guys.
For what it's worth, he's almost done the Donut Hero build, and JAC is working on his too. Something will be ready for use soon.
Click to expand...
Click to collapse
it is push the rosie.apk and watch your logcat when it odex's the file
itll say currently using sdk3 sdk4 required to parse package
But where's the GlobalSearch.apk?
maxisma said:
But where's the GlobalSearch.apk?
Click to expand...
Click to collapse
idk i looked for that as well... maybe its a partial dump or like the OLD OLD hero dumps didnt have half the apps the new ones do....
no hope
sorry for every one...
Dang, those look pretty special.. I wouldnt want to risk bricking one trying to upgrade the version of android; they might not even be compatible at all.
amgupt01 said:
Dang, those look pretty special.. I wouldnt want to risk bricking one trying to upgrade the version of android; they might not even be compatible at all.
Click to expand...
Click to collapse
HaHa,you neednt to worry about that,cause the system of this handset is much older than ones available for G1,the machine is a very very old man ^_^，using a very very old version of Android.
SO NO NEED TO TAKE THE RISK..
Im not that technical when it comes to this, but can the hardware even handle Android?
Forget upgrading them,DUMP THEM. I'd like to see how well the "proto-android" firmware would work on the g1.....once ported of course. And where did you find these? I'd like to try to get my hands on one.
I'm not sure if these can even handle full-blown android - they have 200mhz processors for crying out loud! That said, demos show they are blazing fast (even faster than ours around the ui!) but since these were never put into full production, I doubt you can update it easily...
Good to see you have found 2 gems there... thinking of selling them? =P
dam those are some great prototype android devices, you must keep one stock default, very rare, quite valuable i think. especially the white one.
Woha, prototype devices!
otto888 said:
Forget upgrading them,DUMP THEM. I'd like to see how well the "proto-android" firmware would work on the g1.....once ported of course. And where did you find these? I'd like to try to get my hands on one.
Click to expand...
Click to collapse
A friend give these to me
HaHa they are using a OS based on a very early SDK,I do have the img of the system,just dont know how to flash it because the fastboot and recovery is really different from G1 or G2,to avoid brick it,I would like to find some useful guide...
thx any way....
NguyenHuu said:
dam those are some great prototype android devices, you must keep one stock default, very rare, quite valuable i think. especially the white one.
Click to expand...
Click to collapse
HaHa,I dicide to use them for my convenience,they are so special~~~~mmmm
cadetnudt said:
A friend give these to me
HaHa they are using a OS based on a very early SDK,I do have the img of the system,just dont know how to flash it because the fastboot and recovery is really different from G1 or G2,to avoid brick it,I would like to find some useful guide...
thx any way....
Click to expand...
Click to collapse
Can you provide any pics of the recovery menus? If we are able to dump,we may be able to flash....but I heard these have lower specs than the g1.....so it wouldn't be practical to flash g1 firmware onto these protypes....
otto888 said:
Can you provide any pics of the recovery menus? If we are able to dump,we may be able to flash....but I heard these have lower specs than the g1.....so it wouldn't be practical to flash g1 firmware onto these protypes....
Click to expand...
Click to collapse
MMM~~~I will post some pics later.
What I want isnt flashing G1's ROM in onto them but ROMs from themselves and moded to fix the wlan's problem,cause their wifi cannot work properly yet.
the problem is that there's no source, so we can't really backport a wifi driver for the older kernel (does it even have wifi radio?)
For those who want with old android builds (don't know why though) go here:
http://developer.android.com/sdk/older_releases.html
download the older sdks (betas and pre-betas), they all come with emulators, you should be able to (using their tools folder) dump the system from them (or unyaff's the system included). Again there's really not much there
i doubt that you will be able to flash anything from g1 on this phone, as its screen obviously is a different res
jubeh said:
the problem is that there's no source, so we can't really backport a wifi driver for the older kernel (does it even have wifi radio?)
For those who want with old android builds (don't know why though) go here:
http://developer.android.com/sdk/older_releases.html
download the older sdks (betas and pre-betas), they all come with emulators, you should be able to (using their tools folder) dump the system from them (or unyaff's the system included). Again there's really not much there
Click to expand...
Click to collapse
My friend said that he had one with wifi，can I dump something from it and push it to my EXCA300？
And what steps should I take？
The URL you mentioned,which I had explored early in the morning,includes bulks of SDKs,and through the wiki I have posted before,I knew some SDKs available for EXCA300 then downloaded some versions.They are:
android-sdk_m5-rc15_windows.zip
android-sdk_m5-rc14_windows.zip
android_sdk_windows_m3-rc22a.zip
android_sdk_windows_m3-rc37a.zip
I need more information about the recovery and HBOOT...
Thanks a lot for your warm advice！
Nice. some rare speciments you have there.
NguyenHuu said:
very rare, quite valuable i think. especially the white one.
Click to expand...
Click to collapse
Not really. Stanford SUSE has a ton of these. Supposedly bought them in bulk on the cheap. I had a hold of one for a while a few months ago trying to see if it would be worth the time to get production Android (then 1.1) onto it. It was pretty much a lost cause without support from HTC.
jashsu said:
Not really. Stanford SUSE has a ton of these. Supposedly bought them in bulk on the cheap. I had a hold of one for a while a few months ago trying to see if it would be worth the time to get production Android (then 1.1) onto it. It was pretty much a lost cause without support from HTC.
Click to expand...
Click to collapse
You have one？
Could you tell me the details about yours?
Sorry for the OT: but they are greeeeat! XD
blackgin said:
Sorry for the OT: but they are greeeeat! XD
Click to expand...
Click to collapse
Root manager is your app?
Here is my best adoration....
http://forum.xda-developers.com/showthread.php?t=649460
what works:
NOTHING, but it is fast as hell
and the movie (clearly not Avatar)
http://www.youtube.com/watch?v=vTKd2Mx7L6Q
ok cool digs
waiting till wifi works
looking for further info
really fast !!!!
One major problem is that he needs to resize the images for the smaller res on older devices.
Ace42 said:
One major problem is that he needs to resize the images for the smaller res on older devices.
Click to expand...
Click to collapse
Open each .apk, edit the images, then resign. If I remember correctly, changing the resolution in the build.prop may also help (Don't quote me on it though)
JAguirre1231 said:
If I remember correctly, changing the resolution in the build.prop may also help (Don't quote me on it though)
Click to expand...
Click to collapse
It's correct bro
G1 Port
I know the MT3G is similar to the G1 and at the same time different, will someone port it to work on the G1 too?
Looks pretty cool
slinky1914 said:
I know the MT3G is similar to the G1 and at the same time different, will someone port it to work on the G1 too?
Click to expand...
Click to collapse
doesnt matter, if it works for 32B it'll work for G1. But this isnt for 32b, its for the 32A, Can't see why this is posted here.
'SONY X10 PORT for MT3G PVT32A' - PVT32A
JAguirre1231 said:
Open each .apk, edit the images, then resign. If I remember correctly, changing the resolution in the build.prop may also help (Don't quote me on it though)
Click to expand...
Click to collapse
Must be referring to this
"This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 160"
Ace42 said:
Must be referring to this
"This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
ro.sf.lcd_density = 160"
Click to expand...
Click to collapse
That would be it
Jedipottsy said:
doesnt matter, if it works for 32B it'll work for G1. But this isnt for 32b, its for the 32A, Can't see why this is posted here.
'SONY X10 PORT for MT3G PVT32A' - PVT32A
Click to expand...
Click to collapse
Thanks for saying it, that was oing to be my next post after I got done with the previous conversation, but looks like you did it.
I know this is completely off topic but what if we ported this to a higher resolution device such as the Rhodium that supports the same native resolution as the X10? I say this because I'm still learning how to do all this and don't know nearly enough to make it work.
lol yah I will port it to the g1
no one has ported it yet
People may have LIED about porting it.......
but no one has the full dump yet, and Ill tell ya now a donut ramdisk isnt gona cut it, tried already.
its a technique people use to create hysteria and hype, so that when it IS finally ported. It has been waited on for ages
mods please lock this
this thread is 100% useless
king you always crack me up .. some may have lieeeeeed. hahaha
kingklick said:
lol yah I will port it to the g1
no one has ported it yet
People may have LIED about porting it.......
but no one has the full dump yet, and Ill tell ya now a donut ramdisk isnt gona cut it, tried already.
its a technique people use to create hysteria and hype, so that when it IS finally ported. It has been waited on for ages
Click to expand...
Click to collapse
I don't know if this as already been requested or not (and before you start flamming me, I did search).
I want to ask the cook community if it's possible to release and apk of the sense ui for the official 1.6 rom (I know I could just flash a new rom, but I don't have the expertise to do it by myself).
My reasoning for making this request is the following.
If it's possible to include the Sense in several roms, them it should be possible to create an .apk to install it, like when you install htc home screen on windows mobile pocket pc.
thanks for reading.
p.s. unless you have something useful to add, no waste your time and the forum resources just to say, for example, "it can't be done" if you are not a developer.
blackout_pt said:
I want to ask the cook community if it's possible to release and apk of the sense ui for the official 1.6 rom (I know I could just flash a new rom, but I don't have the expertise to do it by myself).
p.s. unless you have something useful to add, no waste your time and the forum resources just to say, for example, "it can't be done" if you are not a developer.
Click to expand...
Click to collapse
How is saying "it can't be done" not useful? That's like me asking someone to make my magic faster than a computer! Is that possible? Probably not and I think it'd be nice (if I actually thought it could happen) if someone informed me that it's not possible.
I'm not a dev, but I think I can come up with reasonable answers for your question.
Since you aren't even able to flash a new rom (which requires pressing about 5 buttons after root, I don't know how you're not able to do that?), I'm assuming you know almost nothing and I thought it'd be a good idea to inform you, that something like this would be a waste of time and almost impossible. so, it can't really be done. Installing an APK file goes into your system/app or data/app. The sense ui has a freak ton of APK files along with it so installing just 1 apk file well (in my opinion) would not work out well at all. I believe there are also these odex files or whatever (I don't know much about them) but if I'm correct, those will also cause more problems. I belive that the original sense ui has a bunch of apk files in the system/app/ folder and people here even have issues porting out stuff from it, so good luck getting the whole thing out into an APK file on an unrooted phone.
It makes no sense to do this when we could just flash a rom.
Maybe someone could do something like the dxtop or GDE or w/e but that stuff lags like crazy and would probably be missing a lot of things from sense ui. Sense UI is nice and smooth, but already has some lag. It would be horrible and totally a bad idea imo.
Oh and one last thing, it's being done on the 2.1 right now. Why go back to 1.6
I find it ironic that you complain not to waste time and to not post something like "it can't be done." I could've just said that instead of explaining it to you but whatever, I could be wrong. I doubt you understood anything anyways and I think you sort of wasted the time of whoever read this because you didn't do enough research. But if someone can actually do this! Then I'm sorry for wasting your time. But I doubt it.
Whoevers going to do this, good luck lol.
I almost forgot to mention, There's like 1 sense ui rom for 32b. If it was easy, there would be more. Sooo since you're requesting this for 32B, I'm pretty sure.. it's not possible
My friend your response was more than useful. Finally someone explain it like I was (which I am) a complete noob.
As for your strangeness on my inability to install a custom rom, well, let me put it this way, I don't understand half of the steps to get the phone rooted, the right spl, radio and so on... In fact, the only flaw I have to point to the xda-community is that most, if not all, simply assume that everyone knows the "technical" terms by heart, which is not true. And you my friend (allow me to call you that) just made me an huge favor, by putting it in very simple and plain terms.
I'm surprised you found it useful lol, I thought you'd find it more confusing.
The only way you'll really understand and learn it is to do it. For starters, do not touch your Hboot/SPL and Radio. That's the main reason people brick. For example, some people think it's a good idea to erase their Hboot and then reboot the phone. I don't know why, but as long as you don't touch the things which have high risk, you'll be fine. Just follow instructions and play with it (It will consume a lot of time though). Another advice is to get a recovery image on your phone first. Otherwise, you'll encounter a soft brick which may be a pain in the ass
sense for 1.6... i dont think its possible... but there is a tattoo rom out there if u look for it in the g1/dream forum... that is 1.6 with sense ui
ceas909 said:
sense for 1.6... i dont think its possible... but there is a tattoo rom out there if u look for it in the g1/dream forum... that is 1.6 with sense ui
Click to expand...
Click to collapse
normally i don't do this but i don't honestly think you have any idea what you 're talking about.
Sense was first run on 1.5 under the old hero framework last summer. The Droid Eris and Sprint Hero still haven't undergone OTA updates and are still running on 1.5 it was htc's decision to bypass 1.6 altogether.
So having said that, its possible if someone were to take the time to wade through HTC's garble and put it on a 1.6 OS, but why do that when eclair is out???
blackout_pt said:
My friend your response was more than useful. Finally someone explain it like I was (which I am) a complete noob.
As for your strangeness on my inability to install a custom rom, well, let me put it this way, I don't understand half of the steps to get the phone rooted, the right spl, radio and so on... In fact, the only flaw I have to point to the xda-community is that most, if not all, simply assume that everyone knows the "technical" terms by heart, which is not true. And you my friend (allow me to call you that) just made me an huge favor, by putting it in very simple and plain terms.
Click to expand...
Click to collapse
Rooting a rom is a big step but an easy step. Let me tell you the best place to begin sort of a precursor before you come to XDA and thats TheUnlockr.com...They have all the tutorials for rooting, etc with video links to make it a "nice transition". thats where i started...then come back here and get ya feet dirty
the1gladiator said:
normally i don't do this but i don't honestly think you have any idea what you 're talking about.
Sense was first run on 1.5 under the old hero framework last summer. The Droid Eris and Sprint Hero still haven't undergone OTA updates and are still running on 1.5 it was htc's decision to bypass 1.6 altogether.
So having said that, its possible if someone were to take the time to wade through HTC's garble and put it on a 1.6 OS, but why do that when eclair is out???
Click to expand...
Click to collapse
i can see why u dont normally do it.. because u dont know what ur talking about... the htc tattoo is running sense ui on top of donut.. its the only phone that got it... so check your info before u accuse someone of not knowing what they are talking about..
heres some proof http://www.gsmarena.com/htc_tattoo-review-460.php notice where it says Android OS v1.6 (Sense UI) under specs....
blackout_pt said:
My friend your response was more than useful. Finally someone explain it like I was (which I am) a complete noob.
As for your strangeness on my inability to install a custom rom, well, let me put it this way, I don't understand half of the steps to get the phone rooted, the right spl, radio and so on... In fact, the only flaw I have to point to the xda-community is that most, if not all, simply assume that everyone knows the "technical" terms by heart, which is not true. And you my friend (allow me to call you that) just made me an huge favor, by putting it in very simple and plain terms.
Click to expand...
Click to collapse
I can see your apprehension on rooting your phone, but you yourself said you did a lot of research on getting a sense APK for your unrooted phone. why not use some of the research time looking on this crazy website called google.com where you can search things like "how to root a MT3G 32B" upon doing so you will discover a WIDE selection of how to's, you also might find that they link you directly to videos on this other website called youtube.com that show you STEP by STEP how to root your phone. one might say its so easy a caveman could do it.
IMHO if you're too lazy to do any of these things, you probably shouldnt root your phone at all. people wouldnt flame you if didnt come off like an asshole in your first post.
ceas909 said:
i can see why u dont normally do it.. because u dont know what ur talking about... the htc tattoo is running sense ui on top of donut.. its the only phone that got it... so check your info before u accuse someone of not knowing what they are talking about..
hears some proof http://www.gsmarena.com/htc_tattoo-review-460.php notice where it says Android OS v1.6 (Sense UI) under specs....
Click to expand...
Click to collapse
i didn't accuse you of anything shYtbrick...if tatoo is running sense ie 1.6 being greater than 1.5 then why make your first statement about it not being possible at all?
go play in traffic....
and btw, HERES some proof, not HEARS....F me
the1gladiator said:
i didn't accuse you of anything shYtbrick...if tatoo is running sense ie 1.6 being greater than 1.5 then why make your first statement about it not being possible at all?
go play in traffic....
and btw, HERES some proof, not HEARS....F me
Click to expand...
Click to collapse
well if u looked at the op he was asking about getting the sense apk (rosie) and putting it in a 1.6 rom... and ur the dumb f*ck that stepped in with a pointless and idiotic response...idiotic because you didnt bother to search before saying i didnt know what i was talking about...
Tattoo is 1.6, but it's a WVGA device, G1 is a HVGA device then all object in Tattoo will be small than your G1 screen.
funbacon said:
Tattoo is 1.6, but it's a WVGA device, G1 is a HVGA device then all object in Tattoo will be small than your G1 screen.
Click to expand...
Click to collapse
yea thats true.. but the rom that i was refering too had some framework edits still not perfect but its atleast good enough to try it out..
ceas909 said:
well if u looked at the op he was asking about getting the sense apk (rosie) and putting it in a 1.6 rom... and ur the dumb f*ck that stepped in with a pointless and idiotic response...idiotic because you didnt bother to search before saying i didnt know what i was talking about...
Click to expand...
Click to collapse
damned please don't reply because you keep getting worse..your inital quote,
"sense for 1.6... i dont think its possible... but there is a tattoo rom out there if u look for it in the g1/dream forum... that is 1.6 with sense ui"
Which is it shYtbrick? Sense IS or IS NOT POSSIBLE on 1.6?
You contradicted ya damn self
the1gladiator said:
normally i don't do this but i don't honestly think you have any idea what you 're talking about.
Sense was first run on 1.5 under the old hero framework last summer. The Droid Eris and Sprint Hero still haven't undergone OTA updates and are still running on 1.5 it was htc's decision to bypass 1.6 altogether.
So having said that, its possible if someone were to take the time to wade through HTC's garble and put it on a 1.6 OS, but why do that when eclair is out???
Click to expand...
Click to collapse
no eugene made a tattoo 1.6 sense rom, but there was a MAJOR ISSUE WITH SCREEN SIZE. its fully functional, just everything is half as big...
the1gladiator said:
damned please don't reply because you keep getting worse..your inital quote,
"sense for 1.6... i dont think its possible... but there is a tattoo rom out there if u look for it in the g1/dream forum... that is 1.6 with sense ui"
Which is it shYtbrick? Sense IS or IS NOT POSSIBLE on 1.6?
You contradicted ya damn self
Click to expand...
Click to collapse
ur an idiot.. the op wants to know if its possible to build a 1.6 rom and add sense to it... its not possible if not it would had already been done!... but htc did do it on the tattoo..and only works on the tattoo... there is a tattoo port out there for the mt3g/g1 but thats it.... yea my first post wasnt very clear.. but i was just letting the op know about the tattoo port incase he wanted to try it out...
HERE IS THE LEAKED CHINESE ROM FOR THE HTC SENSATION/PYRAMID .. if anyone is daring enough .. this leak also includes the new HTC Sense 3.0
So, if there are any takers in regards to trying to PORT the HTC Sense 3.0 over for our Inspires .. go for it.
This has also been posted in:
Desire HD Android Development
HD2 Android NAND Development
Desire Android Development
http://www.multiupload.com/ZGUANC8IPV
***** DO NOT FLASH THIS TO YOUR PHONE .. THIS IS FOR DEVS ONLY *****
I will try >=|
Sent from my Desire HD using XDA Premium App
Just tried and it wont install it will abort it.
http://dl.dropbox.com/u/24200253/streakLWP.zip
^^ Live Wallpapers from HTC Sense 3.0 atleast the main one
that would be sweet, considering HTC will probably stick with sense 2.1 in the gingerbread update for desire HD/inspire. From what I saw, desire HD should easily handle the visuals though...
you might want to add [devs only] seeing as it is not ported, and will only fail or cause problems when flashed..
mudknot2005 said:
you might want to add [devs only] seeing as it is not ported, and will only fail or cause problems when flashed..
Click to expand...
Click to collapse
DONE .. yeah, I see someone had to attempt it !!! DUH
I keep getting Force Close with this live wallpaper.
FYI, a ROM has been released for the Desire HD here - http://forum.xda-developers.com/showthread.php?t=1036446
As it is there's obviously some stuff broken, and in no way should it be a daily driver right yet. I'm downloading now to see what happens
tehgeekguy said:
FYI, a ROM has been released for the Desire HD here - http://forum.xda-developers.com/showthread.php?t=1036446
As it is there's obviously some stuff broken, and in no way should it be a daily driver right yet. I'm downloading now to see what happens
Click to expand...
Click to collapse
Post your results please. Would this run on the inspire?
Im may start working on this this weekend if I get everything else done I want to. See if I can get something to boot.
Will probably need quite a bit of kernel/init work.
And do I remember reading you need a 64 bit OS to compile a 2.3 kernel? Could be imagining things but I thought I read that somewhere. Luckily though, if thats true I just set up a 64 bit Linux box
di11igaf said:
Im may start working on this this weekend if I get everything else done I want to. See if I can get something to boot.
Will probably need quite a bit of kernel/init work.
And do I remember reading you need a 64 bit OS to compile a 2.3 kernel? Could be imagining things but I thought I read that somewhere. Luckily though, if thats true I just set up a 64 bit Linux box
Click to expand...
Click to collapse
This just got me interested in our dev section again!
di11igaf said:
Im may start working on this this weekend if I get everything else done I want to. See if I can get something to boot.
Will probably need quite a bit of kernel/init work.
And do I remember reading you need a 64 bit OS to compile a 2.3 kernel? Could be imagining things but I thought I read that somewhere. Luckily though, if thats true I just set up a 64 bit Linux box
Click to expand...
Click to collapse
Awesome , Looking forward to your work
I wonder if it is possible to Port the lock screen over to other roms
Sent from my Desire HD using XDA Premium App
dudeluv said:
Post your results please. Would this run on the inspire?
Click to expand...
Click to collapse
I tried it out, it ran just as it would on a DHD... the resolution on the Pyramid is higher than the DHD/Inspire, and it wasn't scaled down, so you can't really see the dock, and the first unlock was a bit weird since there were no icons on the lockscreen to drag down to the ring, and the ring was off the screen.
It worked on AT&T's network fine though. I'm sure once some more work gets done and it fits the screen better, this will be a nice ROM, but right now it's not quite there. But, it IS only the first build and in a very early stage. Keeping an eye on this!
Here's a video someone else made of it on the DHD so you can see what I mean by things not being scaled properly for our resolution - http://www.youtube.com/watch?v=U7P5b-e5POY
I just got my inspire and rooted it last week. I think i might flash this, Do I need eng-off or just put it on my SD card and flash it?
thanks for the update
dudeluv said:
I just got my inspire and rooted it last week. I think i might flash this, Do I need eng-off or just put it on my SD card and flash it?
thanks for the update
Click to expand...
Click to collapse
It's not exactly ready for a daily driver, as evidenced by the previous post.
tehgeekguy said:
I tried it out, it ran just as it would on a DHD... the resolution on the Pyramid is higher than the DHD/Inspire, and it wasn't scaled down, so you can't really see the dock, and the first unlock was a bit weird since there were no icons on the lockscreen to drag down to the ring, and the ring was off the screen.
It worked on AT&T's network fine though. I'm sure once some more work gets done and it fits the screen better, this will be a nice ROM, but right now it's not quite there. But, it IS only the first build and in a very early stage. Keeping an eye on this!
Here's a video someone else made of it on the DHD so you can see what I mean by things not being scaled properly for our resolution - http://www.youtube.com/watch?v=U7P5b-e5POY
Click to expand...
Click to collapse
Hmmm. I wonder if this line in the build.prop is what is causing your display density issues???
line: ro.product.display_resolution = 4.3 inch QHD resolution
The density is set to the standard 240 DPI. That is most likely the culprit.
Just watched the video looks freaking amazing can't wait for the devs to get this thing working
Sent from my Inspire 4g using XDA Premium App
very nice. I will have to attempt to tackle this over the weekend.
Sent from my Inspire 4G using XDA App