OK Ive Done Everything I Can Think Of But Im New To THis Stuff..Can Someone Please Give Me A Step By Step On THis..Ive Been Trying To Install THe Energy Sense 23557 I THink It Is For My Hd2(Leo) and Ive Downloaded On My Phone And On My Computer But I Dont Know What TO Do After That..Ive Tried Using The jzip and zip manager but i really dont understand what im supposed to be doing..can someone please help me..i really want that rom..thanks
Welcome aboard!!
Go here and download the 7Z software that will run on your OS.
http://www.7-zip.org/download.html
Then extract the ROM using 7Z.
Follow flashing instructions posted in the sticky thread at the top of your respected devices forum and your done.
I have tried the energy ROM's and they are well done.
Install 7-zip, then right click on the .7z file and under 7-zip, select 'extract files' (don't select 'extract files here', it can be a mess if there's a lot of stuff in there). A pop-up may appear (can't remember); just click ok and it will take a minute or so.
Related
Hi ppl, sometimes i download a program and i get a bunch of files with an "XML setup" file included, how do install this? Thanks.
Indy
Indym,
Please could you be a bit more unspecific.
Thanks
HPJ
From what i think , you are opening cab files(with winRAR) which have to be directly copied to the WM device you are using rather than being extracted .
So if u have say prog.cab , dont open it with RAR
>just copy to device and run from there
Hope this helps
udayrulz said:
From what i think , you are opening cab files(with winRAR) which have to be directly copied to the WM device you are using rather than being extracted .
So if u have say prog.cab , dont open it with RAR
>just copy to device and run from there
Hope this helps
Click to expand...
Click to collapse
Thats it thanks! Yep i've been unzipping it on my pc. Appreciate your help.
Indy
No Problem
Enjoy!
Btw, this is where I got the ability to cook my splash screen on my ROMs. You know the first bootscreen.
Here.
I don't speak Vietnamese, but it's pretty easy to figure out. If you don't understand me, tell me and I'll write a walkthrough. The pictures tell it all, though.
EDIT:
Things you need:
-Thay Doi_SplashScreen.
-NBH_Tool_v1.1.
-HTC_ROM_Tool.
Create a BMP or JPG that's 240x320.
Run Chạy Tool Replace SplashScreen.exe
Click Load Bitmap and choose your file.
Click Update Splash.
It will create the needed files where the BMP/JPG is currently stored.
Take the ruu_signed.nbh and use NBH_Tool_v1.1 to extract the PrimarySplash.nb that you can use with your ROM.
you should probably type it up anyway. hah
Thanks for the link, Ivan
Can someone upload the files, I cant read the site so I cant make a log in lol.
Thx
Write up
Hi,
I will try to write this up today as time allows.
How-To
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
ttran001 said:
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
Click to expand...
Click to collapse
Thanks Ttran!! I knew someone would step in and help me in my time of laziness.
Dumb Question
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
zcink said:
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
Click to expand...
Click to collapse
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
ttran001 said:
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
Click to expand...
Click to collapse
Okay got it. Will try it. Thanks.
by the way, thanks so much for using Megaupload and Not Rapidshare. Megaupload is by far the best.
I'm nervous about doing this but here goes.
Just one question. I put the PrimarySplash.nb in splash box and not system box -- right?
Please advise.
thanks. (I just don't want to brick my phone.)
Got it -- worked. You are a Genius.
Okay I did what I thought and it worked great. Thanks again!!!!!
yay for viets! (sorry gotta represent)
found this...not sure if you can do anything with it
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Haven't tested that, but it's probably for one of the other two startups. The first startup cannot be changed without flashing.
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Be nice if you could tweak this. Says ROM by Tom Condron. Nice graffics though. Uninstalled.
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
chris30_2001 said:
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
Click to expand...
Click to collapse
did you make the picture that you want for the flash screen ? Did you download the easy how to as well ???
Ok I am no noob .. Maybe im too tired or I missed something somewhere in all of this. So let me ask all the dumb questions and hopefully you can make this a sticky clearly explained. Lets start will all the directions 1 by 1 and hopefully 1 of you geniuses can clean it up then hopefully make a sticky .....
A.) Download all files needed. (assistance is more than welcomed here)
B.) get the picture you want to use for your splash screen.
(**Instructions written by ttran001**)
1. Copy the image you would like to use into the image folder.
2. Open up the Step 1 folder and run the Replace SplashScreen.exe file.
3. Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
4. Click on the Update Splash button.
The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up.
Leave it alone.
5. Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
6. Copy the RUU_singed.nbh and place it into the RUU_signed folder.
7. Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
8. Now go to the step 2 folder and double click on the nbhtool.exe.
9.This will open up Dutty's good NBH tool v1.1.
10. Click on the Decompile NBH file button.
11. Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
12. Choose the same location or the one of your choosing to save the extract files.
13. Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
OK we now have that part as easy as can be. Now the next parts for creating a nbh file.
Download and extract the HTC_ROM_Tool to your computer.
Double click on the htcrt.exe file to get started.
This new screen will popup.
Click on the Build! button.
On this screen click on the box under the Device: to select your device type.
Choose Herald
Type in your version of the rom, example: 4.10.531.3
Click on the box highlighted in red to choose your OS.nb file.
( Now where do we get this file from i would like that clarified and have it added to a download list for the sticky please.)
Click on the Build ROM botton.
This new screen will popup.
OK ... Now we have a nbh file... Now what would be the correct way of flashing this to a device. also the basic questions.
1.) Will this delete and or change my settings. ?
2.) What are the risks of flashing this way ?
3.) Does this work with HardSPL ?
4.) Does this work without HardSPL ?
5.) Must the picture be a bitmap ?
6.) Can I just use the ReplaceSplashScreen to just change the splash screen ?
7.) Does the program ReplaceSplashScreen work on wing before HardSPL or after or both ?
8.) Maybe im really tired how do I put pictures in this thread ... LOL ...
If I want to change the Windows Mobile splash also, do I change the name from "PrimarySplash" to "Secondary Splash"? or something? thanks.
someone tell me use the LeoCustomRUU to flash .7z file to hd2, but failure.
Try reading the stickies in the ROM section to figure out how to flash the phone. If you are still confused then come back with the questions.
oldenn said:
someone tell me use the LeoCustomRUU to flash .7z file to hd2, but failure.
Click to expand...
Click to collapse
active sync your phone to ur comp...dounle click....and go.
make sure you've read ALL INFORMATION REGARDING PROPER FLASHES,
close the antivir programm
You can always ask for help in Rom thread instead open a new one........anyway, the .7z its an archive uou must decompress the you will have a Ruu_Signed.nbh ,this is the rom file, put this one togheter with the LeoCustomRuu.exe and run it.
Okay here is my problem I followed the following tutorial step by step until I got to step 7
addictivetips.com/mobile/install-gingerbread-based-miui-custom-rom-on-samsung-captivate/
After getting to that step they tell you to download cm7-captivate-initial-kernel.tar
from
sourceforge.net/projects/teamhacksung/files/
I have searched everywhere for it and have come up with noting. I tried downloading the .zip file for it but odin doesn't take. zip files it only takes .tar .md5 etc..
If this is the right place to find this file please tell me how to go about getting the file. If someone can be so generous as to give me some in depth insite I would be very grateful. I am really lost right now and have my phone stuck in download mode as to not brick it.
Again thanks ahead of time for anyone who can help me find this file.
BTW I have a samsung captivate if that helps any. oh and sorry for the inconvenience of not posting a direct link. since im new here I am not allowed to post links.
Whats in the zip files
Does it contain he files you need
I am not quite sure what you mean when you say does it contain the files I need. But if you are talking about if I have all the files and completed alll the steps in the tutorial then yes I have.
I just cannot find the file mentioned in the tutorial that is called cm7-captivate-initial-kernel.tar........ I really need someone to point me in the right direction as far as this file goes?
Someone please help me it's been 8 hours that I have my phone in dowload mode as to not brick it. I just need this file... PLEASE HELP
Can someone please reply... I really need to use my phone again. I CANNOT MAKE PHONE CALLS... PLEAS E HELP ME
Try changing the zip extension to tar if that's what it's supposed to be. If you haven't already, unzip the file and see if what you need is inside.
EDIT: You may also want to check the Captivate forums here.
Why didn't you download everything before starting the process?
Sent from my Evo using Tapatalk
I was playing with System/app/...
after checking some useless apps and removing them, this happened to me .
I am wonder what did i choose by mistake, and what was that?
check attachments for screen shots please.
I am not sure about Fusion.apk
If yes that's the problem, may some one provide a copy for me.
Thanks.
Actually they are there, and i can use them, but not visible.
Desire S
ICS 4.0.4
Sense 3.6
fusion.apk is part of htc sense framework, just open rom zip and copy that file to /system/app and reboot
441Excelsior said:
fusion.apk is part of htc sense framework, just open rom zip and copy that file to /system/app and reboot
Click to expand...
Click to collapse
Hi
Dude i ca'not , thats official RUU rom (exe) cant be extract.
then ask someone who use stock rom if he can upload that file for you
441Excelsior said:
then ask someone who use stock rom if he can upload that file for you
Click to expand...
Click to collapse
LooL Thank BTW.
Haven't played with RUU for a very long time. but if I remember correctly, when you run exe it extracts rom zip file to a temp folder somewhere on your c drive, keep it open and do a search you should be able to find the zip.
A good example of why it's a good idea to make a nandroid backup before playing with the system...
ContactFront said:
Haven't played with RUU for a very long time. but if I remember correctly, when you run exe it extracts rom zip file to a temp folder somewhere on your c drive, keep it open and do a search you should be able to find the zip.
Click to expand...
Click to collapse
Yep, OP just needs to search and read. This is exactly the method we used to get the .zip originally when the ICS RUU was released by HTC.
SimonTS said:
Yep, OP just needs to search and read. This is exactly the method we used to get the .zip originally when the ICS RUU was released by HTC.
Click to expand...
Click to collapse
IDC i always relock - install RUU - unlock - root.
THATS ALWAYS BETTER TO HAVE A CLEAR INSTALLATION OF SOME THING RATHER THAN PACK INSTALLATION.
ContactFront said:
Haven't played with RUU for a very long time. but if I remember correctly, when you run exe it extracts rom zip file to a temp folder somewhere on your c drive, keep it open and do a search you should be able to find the zip.
Click to expand...
Click to collapse
That's really nice if it does some thing like that. i did search in %temp% and %user%/app/data
but no trace .
and i am not sure that you are able to use UniExtractor to extract this new type of protected EXE file.
by using CMD, n does command you would get a pack from that EXE file, included a CAB file which is included all data in,
Is there to open a protected CAB?
usualy windows Cabinet files may extract via Winrar, Cabex, Cabextractor, etc ...
SimonTS said:
Yep, OP just needs to search and read. This is exactly the method we used to get the .zip originally when the ICS RUU was released by HTC.
Click to expand...
Click to collapse
2- And there is no big deal with Root n non-rooted device.
3- whats your problem with me?
why you always search for some thing in my topics to say some thing against me?
4-I see that you have lots of thanks
i am wounder that you have ever gained a thanks to solve a problem?????(or just talking off topics, make some one mad, blah blah blah...)
azithro said:
2- And there is no big deal with Root n non-rooted device.
3- whats your problem with me?
why you always search for some thing in my topics to say some thing against me?
4-I see that you have lots of thanks
i am wounder that you have ever gained a thanks to solve a problem?????(or just talking off topics, make some one mad, blah blah blah...)
Click to expand...
Click to collapse
No, there is no problem whether you are rooted or not as you said you need the Fusion.apk - which you just need to pull from the extracted .zip file after the first stage of running the RUU on your PC.
I don't have a problem with you - other than the fact that you seem to want to argue with anyone who gives you advice. You asked for a .apk file - you were suggested to extract it yourself from the RUU and then you decide to argue and find reasons why you can't do it. If you want help then read the answers from knowledgeable people and try what they suggest - otherwise what is the point in asking?
As for my 'Thanks' - who cares? I know less than many of the people on here, and you don't get 'Thanks' in Off-Topic, and I am almost never in OT, and it's none of your damn business why people have thanked me in the past.
You seem to have a real attitude of assuming you have a right to be supported. XDA is not, and never has been, a helpdesk for noobs - you need to get that into your head and deal with it.
Edit on this as I wanted to be sure of what I was saying. If you run the RUU then it will extract various info, including ROM.zip, into a temp folder, but this .zip is only useful as an image to flash from recovery, not to extract individual files from. On that basis, look for one of the ROMs that were based on the official RUU - there was a de-odexed, pre-rooted one released fairly shortly after the RUU - and pull fusion.apk from there.
And don't take your rookie mistake and frustration at yourself out on other members of XDA.
azithro said:
That's really nice if it does some thing like that. i did search in %temp% and %user%/app/data
but no trace .
and i am not sure that you are able to use UniExtractor to extract this new type of protected EXE file.
by using CMD, n does command you would get a pack from that EXE file, included a CAB file which is included all data in,
Is there to open a protected CAB?
usualy windows Cabinet files may extract via Winrar, Cabex, Cabextractor, etc ...
Click to expand...
Click to collapse
It indeed does somthing like this
Look into your C:\Users\YOURUSERNAME\AppData\Local\Temp
SimonTS said:
No, there is no problem whether you are rooted or not as you said you need the Fusion.apk - which you just need to pull from the extracted .zip file after the first stage of running the RUU on your PC.
I don't have a problem with you - other than the fact that you seem to want to argue with anyone who gives you advice. You asked for a .apk file - you were suggested to extract it yourself from the RUU and then you decide to argue and find reasons why you can't do it. If you want help then read the answers from knowledgeable people and try what they suggest - otherwise what is the point in asking?
As for my 'Thanks' - who cares? I know less than many of the people on here, and you don't get 'Thanks' in Off-Topic, and I am almost never in OT, and it's none of your damn business why people have thanked me in the past.
You seem to have a real attitude of assuming you have a right to be supported. XDA is not, and never has been, a helpdesk for noobs - you need to get that into your head and deal with it.
Edit on this as I wanted to be sure of what I was saying. If you run the RUU then it will extract various info, including ROM.zip, into a temp folder, but this .zip is only useful as an image to flash from recovery, not to extract individual files from. On that basis, look for one of the ROMs that were based on the official RUU - there was a de-odexed, pre-rooted one released fairly shortly after the RUU - and pull fusion.apk from there.
And don't take your rookie mistake and frustration at yourself out on other members of XDA.
Click to expand...
Click to collapse
Thanks Bro, Cheers man :highfive:
ContactFront said:
It indeed does somthing like this
Look into your C:\Users\YOURUSERNAME\AppData\Local\Temp
Click to expand...
Click to collapse
Thank you 2 bro. GJ
ContactFront said:
Haven't played with RUU for a very long time. but if I remember correctly, when you run exe it extracts rom zip file to a temp folder somewhere on your c drive, keep it open and do a search you should be able to find the zip.
Click to expand...
Click to collapse
My Desire s is running MIUI v5 android 4.1.2 rom about 4 months and it runs Perfect , the best ROM I have ever used, BTW I bought Lumia 920, and I Love it, do not want to go back to android again.