Database Info

Unable to flash new SPL +more

I made the major mistake of flashing the vodafone hero rom to my 32A SHIP S-ON H (nordic htc branded sapphire). After figuring out that I made a bad move, I tried flashing the superhero v2 that I had before, but it still got stuck at the HTC Magic logo right after boot.
Since then, I've tried a lot of things like re-rooting, flashing a different SPL and doing a restore from Nandroid files.
Flashing a different SPL doesn't change the SPL number at the HBOOT screen (tried both the out-of-the-box SPL, the .2005 engineering SPL and the modded .2004 SPL, but when I reboot it's back to HBOOT-1.33.0009.
restoring from nandroid fails with "FAILED (remote: signature verify fail)"
I'm running out of ideas, though I have a hunch that I'm not flashing the SPL correctly
Any help would be very much welcome

HBOOT-1.33.0009 will not let you fastboot flash nandroid images, Although you still should be able to use a modded recovery to reinstall the system.
Did you try installing superhero via the update.zip?

I only tried that once - here goes another try...
EDIT: Shouldn't I still be able to flash a new SPL?
EDIT2: using a modded recovery and flashing superhero gives no errors (though the progress bar stops at ~80% for a while then all of a sudden, it's complete). After rebooting it it gets stuck on the very first "HTC Magic" screen, so it's not getting very far since superhero loads with the "T-mobile G1" screen

losludvig said:
I made the major mistake of flashing the vodafone hero rom to my 32A SHIP S-ON H (nordic htc branded sapphire). After figuring out that I made a bad move, I tried flashing the superhero v2 that I had before, but it still got stuck at the HTC Magic logo right after boot.
Since then, I've tried a lot of things like re-rooting, flashing a different SPL and doing a restore from Nandroid files.
Flashing a different SPL doesn't change the SPL number at the HBOOT screen (tried both the out-of-the-box SPL, the .2005 engineering SPL and the modded .2004 SPL, but when I reboot it's back to HBOOT-1.33.0009.
restoring from nandroid fails with "FAILED (remote: signature verify fail)"
I'm running out of ideas, though I have a hunch that I'm not flashing the SPL correctly
Any help would be very much welcome
Click to expand...
Click to collapse
Try this :
1. Switch your device into fastboot mode.
2. Fastboot this recovery. (fastboot boot recovery-RAv1.0H.img).
3. Perform a data wipe.
4.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img

I get the error /sbin/sh flash_image: not found
I know of the command "which <command>", but when running "adb shell which flash_image" I get only a blank line.
If I do "adb shell which" I get an explanation of the command, so I don't get why it doesn't work...

If you get a blank line it means that busybox can not find the flash_image binary in the directories specified in your PATH variable.
Try the following :
1. Switch your device into fastboot mode.
2. $fastboot boot recovery-RAv1.0H.img
3. Perform a data wipe.
4. $adb shell mount -a
5.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img
If you still get the same flash_image not found error try this :
1. Get the flash_image binary somewhere (if you don't find it I'll upload it later today).
2. Switch your device into fastboot mode.
3. fastboot boot recovery-RAv1.0H.img
4. Perform a data wipe.
5. Push the flash_image binary to your sbin : adb push flash_image /sbin/flash_image
6. Check if it is actually found : adb shell which flash_image
4.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img

can you post the files? I have the same problem with no back up
thanks

I still can't find flash_image, so I would love it if you posted it
EDIT: found flash_image here: http://jf.odiness.com/v1.50/JFv1.50_ADP1.5.zip
pushing flash_image works fine, but "adb shell which flash_image" still returns a blank line.
Also "adb shell flash_image" returns "/sbin/sh: flash_image: Permission denied"

just tried running a "adb shell mount -a" before doing the flash_image command - that made the command work (finally!)
Flashing boot works fine, but flashing system gives some errors:
Code:
C:\Temp\tools>adb shell flash_image system /sdcard/system.img
mtd: erase failure at 0x013c0000 (I/O error)
mtd: erase failure at 0x013c0000 (I/O error)
mtd: skipping write block at 0x013c0000
mtd: erase failure at 0x02d60000 (I/O error)
mtd: erase failure at 0x02d60000 (I/O error)
mtd: skipping write block at 0x02d60000
... Any ideas?
EDIT: After flashing sytem (with errors) and boot, I went ahead and rebooted... After vibrating and displaying the HTC magic bootscreen for a moment it looks like it's changing image (the screen refreshes), though it's to the same HTC magic logo...
Question - are the errors I'm getting when flashing system because two processes are running (flash_image and shell)?

nordic is htc branded right? if so your going to need a rom from here http://forum.xda-developers.com/showthread.php?t=531837

sammypwns said:
nordic is htc branded right? if so your going to need a rom from here http://forum.xda-developers.com/showthread.php?t=531837
Click to expand...
Click to collapse
correct... However I am not able to boot any of the three roms posted there - it's stuck at the very first "HTC Magic" screen after turning on

flash_image does help me a bit - If I flash my back up'ed boot.img I have root access via adb when the phone enters a loop.
Not sure if this is any help but I get this code from doing "adb logcat"
Code:
D/AndroidRuntime( 329):
D/AndroidRuntime( 329): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 329): CheckJNI is OFF
I/dalvikvm( 329): DexOpt: Some deps went away
E/dalvikvm( 329): /system/framework/com.htc.android.easopen.jar odex has stale
dependencies
I/dalvikvm( 329): Zip is good, but no classes.dex inside, and no valid .odex fi
le in the same directory
D/libc-abort( 329): abort() called in pid 329
I/DEBUG ( 31): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *
**
I/DEBUG ( 31): Build fingerprint: 'tmobile/kila/dream/trout:1.5/CRB43/148830
:user/ota-rel-keys,release-keys'
I/DEBUG ( 31): pid: 329, tid: 329 >>> zygote <<<
I/DEBUG ( 31): signal 11 (SIGSEGV), fault addr deadbaad
I/DEBUG ( 31): r0 00000003 r1 deadbaad r2 00000027 r3 ffff6180
I/DEBUG ( 31): r4 ffff6158 r5 afe2ff28 r6 afe39dd0 r7 afe39dd0
I/DEBUG ( 31): r8 00000000 r9 00000000 10 00000000 fp 00000000
I/DEBUG ( 31): ip 0000001a sp be8a54e8 lr afe1ff33 pc afe1066a cpsr 200
00030
I/DEBUG ( 31): #00 pc 0001066a /system/lib/libc.so
I/DEBUG ( 31): #01 pc 0000afae /system/lib/libc.so
I/DEBUG ( 31): #02 pc 00042198 /system/lib/libdvm.so
I/DEBUG ( 31): #03 pc 0005c276 /system/lib/libdvm.so
I/DEBUG ( 31): #04 pc 0005c330 /system/lib/libdvm.so
I/DEBUG ( 31): #05 pc 0005c4b2 /system/lib/libdvm.so
I/DEBUG ( 31): #06 pc 0003c926 /system/lib/libdvm.so
I/DEBUG ( 31): #07 pc 00040f44 /system/lib/libdvm.so
I/DEBUG ( 31): #08 pc 0002b7a6 /system/lib/libandroid_runtime.so
I/DEBUG ( 31): #09 pc 00008bf2 /system/bin/app_process
I/DEBUG ( 31): #10 pc 0001fd22 /system/lib/libc.so
I/DEBUG ( 31): #11 pc 0000bcb2 /system/lib/libc.so
I/DEBUG ( 31): #12 pc b000157e /system/bin/linker
I/DEBUG ( 31): stack:
I/DEBUG ( 31): be8a54a8 0000a000 [heap]
I/DEBUG ( 31): be8a54ac 00069b95 [heap]
I/DEBUG ( 31): be8a54b0 00069b53 [heap]
I/DEBUG ( 31): be8a54b4 00000000
I/DEBUG ( 31): be8a54b8 00069b53 [heap]
I/DEBUG ( 31): be8a54bc fffe637c
I/DEBUG ( 31): be8a54c0 ad083e1c
I/DEBUG ( 31): be8a54c4 250c8c5b
I/DEBUG ( 31): be8a54c8 00000002
I/DEBUG ( 31): be8a54cc ffff6158
I/DEBUG ( 31): be8a54d0 afe2ff28 /system/lib/libc.so
I/DEBUG ( 31): be8a54d4 afe39dd0
I/DEBUG ( 31): be8a54d8 afe39dd0
I/DEBUG ( 31): be8a54dc afe10663 /system/lib/libc.so
I/DEBUG ( 31): be8a54e0 df002777
I/DEBUG ( 31): be8a54e4 e3a070ad
I/DEBUG ( 31): #00 be8a54e8 000699b0 [heap]
I/DEBUG ( 31): be8a54ec afe0e940 /system/lib/libc.so
I/DEBUG ( 31): be8a54f0 000699b0 [heap]
I/DEBUG ( 31): be8a54f4 afe3c980
I/DEBUG ( 31): be8a54f8 00002bb0
I/DEBUG ( 31): be8a54fc fffffbdf
I/DEBUG ( 31): be8a5500 afe39dd0
I/DEBUG ( 31): be8a5504 000699a8 [heap]
I/DEBUG ( 31): be8a5508 00002bb0
I/DEBUG ( 31): be8a550c afe0afb3 /system/lib/libc.so
I/DEBUG ( 31): #01 be8a5510 afe3c980
I/DEBUG ( 31): be8a5514 afe39dd0
I/DEBUG ( 31): be8a5518 afe3c980
I/DEBUG ( 31): be8a551c afe39dd0
I/DEBUG ( 31): be8a5520 0000a000 [heap]
I/DEBUG ( 31): be8a5524 be8a55a0 [stack]
I/DEBUG ( 31): be8a5528 ad083e1c
I/DEBUG ( 31): be8a552c ffffffff
I/DEBUG ( 31): be8a5530 ad083e1c
I/DEBUG ( 31): be8a5534 00000000
I/DEBUG ( 31): be8a5538 fffe637c
I/DEBUG ( 31): be8a553c ad04219b /system/lib/libdvm.so
"adb get-state" returns "device", so I guess it thinks that It's booted up fine.
I was wondering if adb push'ing the system folder of a rom could make my troubles go away, but when I do "adb push /Temp/system/ /system/"
I get "cannot stat '/Temp/system/': No such file or directory" even though the folder exists...
Please help as I'm starting to get desperate

I don't like those erase failures you're getting...

I don't like those erase failures you're getting...
If I were you I would try to perform an erase in fastboot mode first.
Find an update.zip (HTC branded) which includes a full boot and system and copy the update.zip to your sdcard. Maybe try a lite version of one here
1. Switch your device into fastboot mode.
2. Perform an erase (hopefully you don't get any errors while doing this) :
$fastboot erase boot
$fastboot erase system
$fastboot erase recovery
$fastboot erase cache
$fastboot erase userdata
3. $fastboot boot recovery-RAv1.0H.img
wait for a while...
4. update
5. reboot

I have a similar problem. Can set the phone in fastboot usb mode, but my computers wont show anything in devices list. My computer finds and installs the phone as HTC Bootloader when in fastboot usb mode.
Any clue why my computer wont detect my phone propery?
DVT32B
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
My computer finds my G1 as normal if I connect it showing it as HTC Bootloader in Device Manager.
Any help and I'll be very grateful.

perhaps try on ubuntu?

Have tried with XP, Vista, Win7 and Mac.
Not tried Unbuntu yet. Was hoping not to install Unbuntu on any of my computers.

Amon_RA said:
I don't like those erase failures you're getting...
If I were you I would try to perform an erase in fastboot mode first.
Find an update.zip (HTC branded) which includes a full boot and system and copy the update.zip to your sdcard. Maybe try a lite version of one here
1. Switch your device into fastboot mode.
2. Perform an erase (hopefully you don't get any errors while doing this) :
$fastboot erase boot
$fastboot erase system
$fastboot erase recovery
$fastboot erase cache
$fastboot erase userdata
3. $fastboot boot recovery-RAv1.0H.img
wait for a while...
4. update
5. reboot
Click to expand...
Click to collapse
Sadly, that doesn't work either

what i did when i had mine stuck at the first splash (i thot i'd killed my phone too, all partitions were erased at this stage with stock SPL & recovery):
1. enter fastboot
2. $fastboot boot recovery-RAv1.0H.img
3. on phone screen apply update.zip, where update.zip is haykuro's 2005 engineer SPL (dont have the actual filename handy, sorry but u can find it in the SPL collection)
4. power off, enter fastboot again
5. $fastboot flash nandroid backed system, data, misc, boot in order.
6. finally i applied stock SPL update.zip back, not necessary tho.

assembledinnz said:
what i did when i had mine stuck at the first splash (i thot i'd killed my phone too, all partitions were erased at this stage with stock SPL & recovery):
1. enter fastboot
2. $fastboot boot recovery-RAv1.0H.img
3. on phone screen apply update.zip, where update.zip is haykuro's 2005 engineer SPL (dont have the actual filename handy, sorry but u can find it in the SPL collection)
4. power off, enter fastboot again
5. $fastboot flash nandroid backed system, data, misc, boot in order.
6. finally i applied stock SPL update.zip back, not necessary tho.
Click to expand...
Click to collapse
Sadly, I can't flash my SPL (as indicated by the title of the thread)
I guess that it's a hardware fault, and I'm returning my phone...
EDIT: just got home from the store, I got a new phone - no questions asked

[GUIDE + Microphone Fix][NOOB Friendly] Port CM9 / CM10 Based Roms

Intro​
Code:
/* Last Time i got multiple Requests how to FIX Ril in CM9/CM10 Based Roms
/* Now, i figured out how to get the Mic working and how to port the
/* CM10/CM9 Based Roms, with extended explaining how to and
/* logcats with the problem what needs to be fixed!
/* This Thread tell you all Informations and will show Picture based
/* Informations also ;)
Now lets start ^^
Step 1​
Its quietly easy:
-extract both Roms in two folders, like the base Rom (CM9/CM10 from your Device) in a Folder named Port and the (CM9/CM10 based) Rom from the Device from that u wanna port in a Folder like "Orig/Original"
Picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Now delete the following Folders in "Port" Folder (the specific folders are placed in /system): /app ; /framework ; /fonts ; /media
Picture:
- Open both Folders once more and move the /app ; /framework ; /fonts ; /media folder from "Original/system" Folder in the "Port/system" Folder
Picture:
-Now u have the basic thing in it
Click to expand...
Click to collapse
Step 2​
- now delete from the "Port/system/lib" Folder this File: android_runtime.so
- Now move the android_runtime.so from the "Original/system/lib" Folder in the "Port/system/lib" Folder ^^
Picture:
- Now u need to modify the build.prop (Notepad++)! Open both in Notepad+ and delete the "ro.build.description=
ro.build.fingerprint=" Line from the original build.prop!
- Open the build.prop from the "Original/system Folder" and copy the "ro.build.description=
ro.build.fingerprint=" Lines
- Now re-open the build.prop from the the "Port/system" Folder and paste the lines below "# Do not try to parse ro.build.description or .fingerprint" Line!
Picture:
Now save it
-Zip all Folders and Files in the "Port" Folder!
-Try to flash it and try to BOOT it ... (I think that it wont boot)
Click to expand...
Click to collapse
Step 3​
I think it wont boot (U will see a long time the Bootanimation and nothing will happen)
Its just a lib related error:
Code:
F/libc ( 449): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)
I/DEBUG ( 117): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 117): Build fingerprint: 'lge/thunderg/thunderg:2.3.3/GRI40/LG-P500-V20h.19D34B612E:user/release-keys'
I/DEBUG ( 117): pid: 449, tid: 449 >>> system_server <<<
I/DEBUG ( 117): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad
I/DEBUG ( 117): r0 deadbaad r1 0000000c r2 00000027 r3 40000000
I/DEBUG ( 117): r4 00000000 r5 00000080 r6 4b048987 r7 be9f9778
I/DEBUG ( 117): r8 40813200 r9 00000006 10 46218e1c fp fffffe50
I/DEBUG ( 117): ip ffffffff sp be9f9740 lr 4001f377 pc 4001b7c2 cpsr 00000030
I/DEBUG ( 117): d0 3fe99999a0000000 d1 3ff0000000000000
I/DEBUG ( 117): d2 bebbbc6c1a570a20 d3 3f1155e54e7e8408
I/DEBUG ( 117): d4 bfb1be5a93a83e1d d5 4000000000000000
I/DEBUG ( 117): d6 4a066ec000000000 d7 000000344d520d0c
I/DEBUG ( 117): d8 0000000000000000 d9 0000000000000000
I/DEBUG ( 117): d10 0000000000000000 d11 0000000000000000
I/DEBUG ( 117): d12 0000000000000000 d13 0000000000000000
I/DEBUG ( 117): d14 0000000000000000 d15 0000000000000000
I/DEBUG ( 117): scr 80000010
I/DEBUG ( 117):
I/DEBUG ( 117): #00 pc 000177c2 /system/lib/libc.so
I/DEBUG ( 117): #01 pc 0000c658 /system/lib/libnativehelper.so (jniRegisterNativeMethods)
I/DEBUG ( 117):
I/DEBUG ( 117): code around pc:
I/DEBUG ( 117): 4001b7a0 1c2bd00c 2d00682d e027d1fb 2a0068da ..+.-h.-..'..h.*
I/DEBUG ( 117): 4001b7b0 4b16d004 447b2001 47906018 22274814 ...K. {D.`.G.H'"
I/DEBUG ( 117): 4001b7c0 70022580 ef6ef7f4 f7f62106 aa01e80c .%.p..n..!......
I/DEBUG ( 117): 4001b7d0 05692400 60546091 20061c11 f7f59401 .$i..`T`... ....
I/DEBUG ( 117): 4001b7e0 a905ebc8 20022200 ebd0f7f5 ef5af7f4 .....". ......Z.
I/DEBUG ( 117):
I/DEBUG ( 117): code around lr:
I/DEBUG ( 117): 4001f354 4b0db5f0 447bb083 681c2600 68a59001 ...K..{D.&.h...h
I/DEBUG ( 117): 4001f364 e0086867 5ea8220c dd032800 99011c28 gh...".^.(..(...
I/DEBUG ( 117): 4001f374 43064788 3f013554 6824d5f4 d1ee2c00 .G.CT5.?..$h.,..
I/DEBUG ( 117): 4001f384 1c30b003 46c0bdf0 0002818e 1c0fb5f0 ..0....F........
I/DEBUG ( 117): 4001f394 b0891c3d a9064355 604d9103 90064914 =...UC....M`.I..
I/DEBUG ( 117):
I/DEBUG ( 117): memory map around addr deadbaad:
I/DEBUG ( 117): be9da000-be9fa000 [stack]
I/DEBUG ( 117): (no map for address)
I/DEBUG ( 117): (no map above)
I/DEBUG ( 117):
I/DEBUG ( 117): stack:
I/DEBUG ( 117): be9f9700 00000002
I/DEBUG ( 117): be9f9704 7b4c2d14
I/DEBUG ( 117): be9f9708 40047774 /system/lib/libc.so
I/DEBUG ( 117): be9f970c 4004c8bc
I/DEBUG ( 117): be9f9710 00000000
I/DEBUG ( 117): be9f9714 4001f377 /system/lib/libc.so
I/DEBUG ( 117): be9f9718 4b04753a /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f971c 4001e0dd /system/lib/libc.so
I/DEBUG ( 117): be9f9720 ffffffff
I/DEBUG ( 117): be9f9724 00000000
I/DEBUG ( 117): be9f9728 00000000
I/DEBUG ( 117): be9f972c 4b048987 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9730 be9f9778 [stack]
I/DEBUG ( 117): be9f9734 4001e4f5 /system/lib/libc.so
I/DEBUG ( 117): be9f9738 df0027ad
I/DEBUG ( 117): be9f973c 00000000
I/DEBUG ( 117): #00 be9f9740 00000002
I/DEBUG ( 117): be9f9744 00000100
I/DEBUG ( 117): be9f9748 4b045169 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f974c 7b4c2d14
I/DEBUG ( 117): be9f9750 0000002b
I/DEBUG ( 117): be9f9754 fffffbdf
I/DEBUG ( 117): be9f9758 0000f2c8 [heap]
I/DEBUG ( 117): be9f975c 40849fdd /system/lib/libdvm.so
I/DEBUG ( 117): be9f9760 0000f2c8 [heap]
I/DEBUG ( 117): be9f9764 401d665b /system/lib/libnativehelper.so
I/DEBUG ( 117): #01 be9f9768 40849fdd /system/lib/libdvm.so
I/DEBUG ( 117): be9f976c 401d665b /system/lib/libnativehelper.so
I/DEBUG ( 117): be9f9770 4b04aac4 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9774 00000004
I/DEBUG ( 117): be9f9778 0000f2c8 [heap]
I/DEBUG ( 117): be9f977c 74800019
I/DEBUG ( 117): be9f9780 00000028
I/DEBUG ( 117): be9f9784 4b048987 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9788 0000f2c8 [heap]
I/DEBUG ( 117): be9f978c 00012830 [heap]
I/DEBUG ( 117): be9f9790 00000000
I/DEBUG ( 117): be9f9794 4b04522d /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9798 00012b88 [heap]
I/DEBUG ( 117): be9f979c 4b0473c1 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f97a0 001fc710 [heap]
I/DEBUG ( 117): be9f97a4 00012830 [heap]
I/DEBUG ( 117): be9f97a8 00000000
I/DEBUG ( 117): be9f97ac 4b0473ef /system/lib/libandroid_servers.so
D/Zygote ( 408): Process 449 terminated by signal (11)
I/Zygote ( 408): Exit zygote because system server (449) has terminated
What is easy to fix: Replace the android_servers.so in "Port/system/lib" Folder with the one in Original/system/lib Folder
Picture:
Now re-zip all Files and Folders in the /Port Folder and it should boot now after u flashed it!
Click to expand...
Click to collapse
Step 4​
Maybe u get always a Phone FC Error or no one can hear u while u are calling someone! :silly:
Thats an Ril related error
Now u think, what should i do, right?
Hmm u need to decompile both framework.jar´s from "Port/system/framework/" and the one from ur base zip like CM9 or CM10 from your device!
u need apktool for that, its not related for framework.jar´s when u have a gingerbread apktool (1.4.3) or an ics one! its only related that u know how to decompile, recompile and repack the jar (winrar)
rename the framework.jar from your CM9 or CM10 (your Device, NOT FROM THE "PORT" Folder) to framework-orig.jar and put it in apktool folder!
Place the framework.jar from the "Port" folder also in the apktool folder
Now 2 simple commands in apktool cmd window:
Code:
apktool d framework-orig.jar
and
Code:
apktool d framework.jar
let it decompile and close the window only when there is a word: "Done"!
Now open framework.jar.out folder and framework-orig.jar.out folder, yet open in both folders: /smali/com/android/internal/telephony ^^
copy all files which start with RIL and end with .smali and placed in the framework-orig.jar.out/smali/com/android/internal/telephony Folder and put it in the framework.jar.out/smali/com/android/telephony Folder (replace them all)
Some Devices have in build.prop a specific Ril Class Path! Mine is: "ro.telephony.ril_class=JellaxyRIL" urs can variate after the "="! If this is the case, look once more in framewok-orig.jar.out/smali/com/android/internal/telephony and search for "JellaxyRIL" or how ur´s is called after "=" in the RIL Class
Now copy the "JellaxyRIL.smali" (Its the one from my base Rom) or whatever in the other Folder "framework.jar.out/smali/com/android/telephony" !
Now re-compile it:
Code:
apktool b framework.jar.out
let it compile, it takes a few minutes (depends on ur PC Speed)
Now open the framework.jar from "apktool" Folder with WinRAR
and move the classes.dex from "apktool/framework.jar.out/build/apk in the opened WinRAR Window and let it re-pack, now close the Windows (WinRAR) and move the new framework.jar from /apktool in "Port/system/framework"
Voila, Mic Working and no more Phone FC´s!
If u have a problem with it, pm me with the following files:
framework.jar (from the Rom u wanna port), framework.jar (from your base CM10 or CM9) and your build.prop (from ur base CM10 or CM9)
Click to expand...
Click to collapse
Step 6​
May barebone your Rom will improve the stability
Some apps u can remove:
*QuickSearchBox.apk
*STK.apk
*GoogleMail.apk (Mail.apk is still included, so why there should be 2 Mail Apps )
*Term.apk (Terminal Emulator)
*Voice Dialer (Its not the phone and takes also no effect to it)
*VideoEditor.apk (WTF who wants to cut Videos over android 0.o
oh i forgot about that step:
move from "Port/system/etc/permissions" Folder, all Files to "Original/system/etc/permissions" Folder (Replace them) and move them all back to "Port/system/etc/permissions" Folder! One more Thing: if Superuser isn´t working, take the "su File from "Original/system/xbin" and move it to "Port/system/xbin" Folder and replace it!
Click to expand...
Click to collapse

In case the Rom wont boot or u cant do any step bcoz u wont understand it:​
My support: Only over Facebook
Click to expand...
Click to collapse
For the reply "Rom wont boot! Pls help me ", i wont read it!
U need to add the related things i provide now:
Code:
Logcat:
Rom (u wanna port):
Rom Link:
Base Rom:
Base Rom Link:
Your Device:
Click to expand...
Click to collapse

nice guide. gonna try this sometimes

Syfer_Fever said:
nice guide. gonna try this sometimes
Click to expand...
Click to collapse
can u explain me if i want to port CM 10 from mini to my fit so what do i do.
which is the port rom and original rom.
totally confused.
don't understand base rom and etc stuffs. lil explanation need. plz help

creativeguy09 said:
can u explain me if i want to port CM 10 from mini to my fit so what do i do.
which is the port rom and original rom.
totally confused.
don't understand base rom and etc stuffs. lil explanation need. plz help
Click to expand...
Click to collapse
i think you just replace "usr" folder from cm10-beni to ROM you wanna port and replace the kernel with ours, if the ROM dosen't boot try Step 2
if you still confuse maybe you can ask the OP

Syfer_Fever said:
i think you just replace "usr" folder from cm10-beni to ROM you wanna port and replace the kernel with ours, if the ROM dosen't boot try Step 2
if you still confuse maybe you can ask the OP
Click to expand...
Click to collapse
IN FOLDER PORT Put in the Rom from your device! and in ORIGINAL the Rom u wanna port
To Syfer_Fever: Should i ad a video that u understand it? :silly:
It takes no effect if u replace the /usr folder with the same /usr folder!

DQiB said:
IN FOLDER PORT Put in the Rom from your device! and in ORIGINAL the Rom u wanna port
To Syfer_Fever: Should i ad a video that u understand it? :silly:
It takes no effect if u replace the /usr folder with the same /usr folder!
Click to expand...
Click to collapse
video? for me? for what?
to get soft key button works because mini don't have soft button

hi dqib can you make guide how to port stock based rom from other device like gio,y etc...waiting for guide

Syfer_Fever said:
video? for me? for what?
to get soft key button works because mini don't have soft button
Click to expand...
Click to collapse
last time i tell it u!
All files out of /app ,/framework ,/media ,/fonts
are completely the same (BCOZ YOU USE THE LATEST CM9 OR CM10 for GALAXY FIT and not the ROM FROM GALAXY MINI )

DQiB said:
last time i tell it u!
All files out of /app ,/framework ,/media ,/fonts
are completely the same (BCOZ YOU USE THE LATEST CM9 OR CM10 for GALAXY FIT and not the ROM FROM GALAXY MINI )
Click to expand...
Click to collapse
lol relax "mr.all know everything" you are using capslock seems your childish is out
don't be arrogant, you should tell people who don't know nicely

yes my friend yes sir if u will make a video i would be really thankful and grateful to u. i'm following your instructions but a video would be helpful. great work thanks.
by the way as a personal thought which is the best rom to use for fit. i'm using CM7 currently original one.

I make a kitchen for porting ...
It should be easier for u
Sent from my GT-S5660 using xda app-developers app

? Sorry what u saying kitchen? I don't understand
Sent from my GT-S5670 using xda app-developers app

it helps u t odo it! (porting)
U only need to edit the build.prop and zip the rest ^^
(RIL Fix also, thats manual) :laugh:

Please give the link of working kitchen for our Samsung galaxy fit and apktool also. I have a kitchen file but it's only for HTC roms
Sent from my GT-S5670 using Tapatalk 2
---------- Post added at 10:42 PM ---------- Previous post was at 10:39 PM ----------
DQiB said:
I make a kitchen for porting ...
It should be easier for u
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Please give the link of working kitchen for our Samsung galaxy fit and apktool also. I have a kitchen file but it's only for HTC roms
Sent from my GT-S5670 using Tapatalk 2

[Q] Attempt to open device /dev/radio0 yields EBUSY

I have a rooted Xperia E C1504 on which I would like to access the FM receiver chipset for a custom FM radio app I'm working on. Trouble is that my fcntl open() call to /dev/radio0 keeps returning EBUSY (errno 16: device or resource busy). Here is the code I'm using to try to open the device (executed in a root shell):
Code:
#define DEFAULT_RADIO_DEVICE "/dev/radio0"
...
radio_fd = open(DEFAULT_RADIO_DEVICE, O_RDWR);
I verified that the radio device is functional with the stock FM Radio app, which was able to tune to a frequency and receive PCM successfully. I turned this app off via its power button icon (this should release /dev/radio0, correct?) and explicitly force-stopped the stock FM Radio app from the Settings->Apps menu, and even deleting Radio.apk (the stock FM Radio app package) from /system/apps with Root Browser and then rebooting the phone, but my program continues to return EBUSY when it executes the above instruction.
What is the best way to investigate what process might be holding a lock on /dev/radio0 and kill it? I tried [adb shell "su -c 'lsof /dev/radio0'"] but the returned list didn't have any entries exactly matching /dev/radio0. There were quite a few cases of '/dev/log/radio' and almost 300 cases of just the word 'radio', but I was expecting to see something listed as using exactly /dev/radio0. I also tried [adb shell ps | grep radio] which returned
Code:
root 79 2 0 0 ffffffff 00000000 S kfmradio
radio 155 140 20416 3232 ffffffff 00000000 S /system/bin/rild
radio 178 140 7820 2472 ffffffff 00000000 S /system/bin/cnd
radio 215 140 6152 500 ffffffff 00000000 S /system/bin/qmuxd
radio 231 140 7288 752 ffffffff 00000000 S /system/bin/netmgrd
radio 610 157 311448 35704 ffffffff 00000000 S com.android.phone
the kfmradio process looked suspicious so I tried killing it, which didn't return any errors, but re-running the filtered ps list above showed that kfmradio was still in the process list (I suppose the OS restarted it?) Any advice regarding troubleshooting EBUSY returns from fcntl open() calls would be very helpful.
Device Model: Sony Xperia E C1504
Linux kernel: 3.4.0
Android OS: 4.1.1
Firmware version: Stock Kernel Xperia E C1505_11.3.A.0.47 (supposed to work for the C1504 as well)
Rooted with: SRSRoot and the 'Gandalf' exploit.

Unfortunately, Camera has stopped CM12s

CameraNext crashes on most ROMs I install. I am currently on a stock rom and still crashing. Normally I would just use another camera app but if it's fixable - awesome. Google Camera works fine.
I have attached 2 crash reports. I cannot generate the second one again, which it a bit odd.
Is there a fix? TIA
Kind regards
Benjamin
Android:
12.0 YNG1TAS17L
5.0.2
Camera
CameraNext
2.0.004
Crash 1
java.lang.RuntimeException: Media server died.
at com.android.camera.Y.onError(SourceFile:33)
at android.hardware.Camera$EventHandler.handleMessage(Camera.java:1195)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:135)
at android.os.HandlerThread.run(HandlerThread.java:61)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Crash 2
Build fingerprint: 'oneplus/bacon/A0001:5.0.2/LRX22G/YNG1TAS17L:user/release-keys'
Revision: '0'
ABI: 'arm'
pid: 10164, tid: 10181, name: Binder_2 >>> com.cyngn.cameranext <<<
signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x0
r0 00000000 r1 ad32209c r2 00000025 r3 00000000
r4 a3018040 r5 b6ba5de1 r6 ad320080 r7 00002000
r8 adde7b54 r9 00000000 sl 00002000 fp adde7bf0
ip b6bb5ec0 sp adde7b38 lr b6ba5ea5 pc b6e261f8 cpsr a0000030
backtrace:
#00 pc 000981f8 /system/lib/libandroid_runtime.so (JNICameraContext::copyAndPost(_JNIEnv*, android::sp<android::IMemory> const&, int)+35)
#01 pc 00098353 /system/lib/libandroid_runtime.so (JNICameraContext:ostData(int, android::sp<android::IMemory> const&, camera_frame_metadata*)+102)
#02 pc 0001e995 /system/lib/libcamera_client.so (android::Camera::dataCallback(int, android::sp<android::IMemory> const&, camera_frame_metadata*)+54)
#03 pc 00022321 /system/lib/libcamera_client.so (android::BnCameraClient:nTransact(unsigned int, android:arcel const&, android:arcel*, unsigned int)+220)
#04 pc 00017fc5 /system/lib/libbinder.so (android::BBinder::transact(unsigned int, android:arcel const&, android:arcel*, unsigned int)+60)
#05 pc 0001cf7b /system/lib/libbinder.so (android::IPCThreadState::executeCommand(int)+582)
#06 pc 0001d09f /system/lib/libbinder.so (android::IPCThreadState::getAndExecuteCommand()+38)
#07 pc 0001d0e1 /system/lib/libbinder.so (android::IPCThreadState::joinThreadPool(bool)+48)
#08 pc 0002124b /system/lib/libbinder.so
#09 pc 0000ef11 /system/lib/libutils.so (android::Thread::_threadLoop(void*)+112)
#10 pc 0005a62d /system/lib/libandroid_runtime.so (android::AndroidRuntime::javaThreadShell(void*)+72)
#11 pc 0000ea81 /system/lib/libutils.so
#12 pc 00013a1b /system/lib/libc.so (__pthread_start(void*)+30)
#13 pc 00011a0f /system/lib/libc.so (__start_thread+6)

* Cleared Data and Cache, no bacon.

I hit this bug constantly. For me, the camera is effectively unusable. I've also tried clearing cache &c.

My cameras have stopped too & I don't know how to remove or try better camera software pkg. If someone could help me to do this it would be great. Thankyou Currently running 1+1,
Resurrection Remix, 5.5.6 with slim0 gapps,+ latest cm12.1 nightly Don't have ear speaker on phone calls working either but I need my cameras back first.

wel for best results flash the K1 Color Os package in recovery.
amazing.
also you could install the A Better Camera app, its equally good if you know how to play with the light.
lastly, the Moto V3 camera port is superb..
u need to try all three to know which works best for u.
regards
---------- Post added at 01:38 PM ---------- Previous post was at 12:43 PM ----------
here are the links for the cams I use which are tested working on OP1 and LG G2 and Nexus 5.
superb apps..
COS Cam Port - http://d-h.st/gskk
here is the original thread of the port - http://forum.xda-developers.com/oneplus-one/themes-apps/coloros-camera-port-t3034148
Moto Cam port - http://d-h.st/SF8S
(remove - http://d-h.st/Prw9)
here is the original thread of the port - http://forum.xda-developers.com/android/apps-games/flashable-port-moto-camera-fullfilled-t3172783
all credits to the original devs, i am just sharing....
regards

Lineage 14.1 Stable - Micromax Canvas 5 E481

Join this groups for roms and support...
Telegram:
https://t.me/teammaxmtk
Facebook:
https://m.facebook.com/groups/673560846179945?ref=bookmarks

Congrats to every canvas 5 user.
Don't forget to join the official whatsapp group of canvas 5.
https://chat.whatsapp.com/2YtWDoFzukZKthAUenMv74

Plz share the SS of the rom.
Big hit and Thanks to Arshjot singh and Harishwarrior bro... U two are the best dev... Give new soul to MMX CANVAS 5

..

sun75 said:
Hi,
after some debugging, I solved the compass problem (at least on the Wiko Fever 4G). If the Canvas has the same sensor, you have to put a /etc/init.d/30compass script as follow:
---CUT HERE
#!/system/bin/sh
# Adding Ecompass Daemon - By Sun75 @ XDA ####
su 0 setenforce 0
/system/bin/logwrapper /system/bin/akmd09911 &
##############################################
---CUT HERE
Make sure you have /xbin/su in your Rom, but in your's... there is!
Repack the Rom zip, and reflash it (you will lack Selinux permissions by adding with a Root explorer) with TWRP.
At next boot, your Msensord will fail starting the gsensor child daemon, but you will have the gsensor/compass daemon started as a separated daemon fixing the problem!
09-16 21:53:28.249 330 330 D MsensorDaemon: Msensor deamon statr!!!!!!!!!!!!
09-16 21:53:28.249 330 330 D MsensorDaemon: msensor demon start process detect demon name = akmd09911
09-16 21:53:28.249 330 330 D MsensorDaemon:
09-16 21:53:28.249 330 330 D MsensorDaemon: msensor demon start process detect demon prop = init.svc.akmd09911
09-16 21:53:28.249 330 330 D MsensorDaemon:
09-16 21:53:28.249 330 330 D MsensorDaemon: start_msensor_demon
09-16 21:53:28.500 330 330 D MsensorDaemon: do not USE_LIBC_SYSTEM_PROPERTIES
09-16 21:53:28.500 330 330 E MsensorDaemon: [99] ''
09-16 21:53:28.600 330 330 D MsensorDaemon: do not USE_LIBC_SYSTEM_PROPERTIES
09-16 21:53:28.601 330 330 E MsensorDaemon: [98] ''
09-16 21:53:28.701 330 330 D MsensorDaemon: do not USE_LIBC_SYSTEM_PROPERTIES
09-16 21:53:28.701 330 330 E MsensorDaemon: [97] ''
.....
09-16 21:53:38.324 330 330 E MsensorDaemon: [01] ''
09-16 21:53:38.424 330 330 D MsensorDaemon: do not USE_LIBC_SYSTEM_PROPERTIES
09-16 21:53:38.424 330 330 E MsensorDaemon: [00] ''
09-16 21:53:38.524 330 330 E MsensorDaemon: start daemon timeout!!
09-16 21:53:38.524 330 330 D MsensorDaemon: msensor demon start akmd09911 fail
09-16 21:53:38.524 330 330 D MsensorDaemon: Msensor deamon2 statr!!!!!!!!!!!!
09-16 21:53:38.525 330 330 D MsensorDaemon: open demon attr err = No such file or directory
-> and after:
09-16 21:53:29.396 448 448 I AKMD2 : AKMD 6D with Pseudo Gyro v20130531(Library for AK9911: v6.1.1.531) started.
09-16 21:53:29.396 448 448 I AKMD2 : Debug: ON
09-16 21:53:29.399 448 448 E AKMD2 : LoadPDC:106 fopen Error (No such file or directory).
Ignore the errors...
If your sensor is not the akm09911, you can find it yourself:
V:\Android\logs>adb shell cat /sys/bus/platform/drivers/msensor/chipinfo
akm09911 Chip
Ok, now open cpu-z or Mtk Engineering (Msensor data) and you will find your compass ready to use (and to calibrate!).
I have ported your all your RR Roms to Wiko Fever 4G fixing many problems, but not all:
- RR-N-v5.8.3-20170527-e481-Official -> VERY stable, compass and gps working, kernel 3.10.65 Stock, FM Radio and front flash NOT working
- RR-N-v5.8.4-20170903-E481-Release.zip -> instable, compass, FM Radio and gps working, kernel 3.10.65 Stock, front flash NOT working
- Resseruction Remix N 5.8.3 By Asfand.zip -> the MOST stable, compass and fm radio working, kernel 3.18.x (MM_V34 Stock), front flash AND gps NOT working. It's a pity that the kernel can not link /dev/stpgps and read /dev/ttyC2 (while it can on 3.10.x kernels!)... I reassembled the boot.img and edited the init.scripts many and many times trying everything... but, it's a no go, at least with the MM Kernel...
Ok, I think I have to open a new thread for the Wiko Fever releases, if you agree!
Click to expand...
Click to collapse
thank you so much , and please help us to fix front flash
Thanks in advance

Bro do you know how to make a volte patch?

--------- beginning of crash
09-17 11:46:21.913 302 302 F libc : CANNOT LINK EXECUTABLE "/system/bin/mtk_agpsd": cannot locate symbol "UCNV_TO_U_CALLBACK_STOP_53" referenced by "/system/bin/mtk_agpsd"...
09-17 11:46:21.913 302 302 F libc : Fatal signal 6 (SIGABRT), code -6 in tid 302 (mtk_agpsd)
09-17 11:46:21.975 336 336 F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
09-17 11:46:21.975 336 336 F DEBUG : LineageOS Version: '14.1-20170527-OFFICIAL-E481'
09-17 11:46:21.975 336 336 F DEBUG : Build fingerprint: 'Micromax/lineage_E481/E481:7.1.2/N2G47O/29cf694e04:userdebug/test-keys'
09-17 11:46:21.975 336 336 F DEBUG : Revision: '0'
09-17 11:46:21.975 336 336 F DEBUG : ABI: 'arm'
09-17 11:46:21.975 336 336 F DEBUG : pid: 302, tid: 302, name: mtk_agpsd >>> /system/bin/mtk_agpsd <<<
09-17 11:46:21.975 336 336 F DEBUG : signal 6 (SIGABRT), code -6 (SI_TKILL), fault addr --------
09-17 11:46:21.975 336 336 F DEBUG : r0 00000000 r1 0000012e r2 00000006 r3 00000008
09-17 11:46:21.975 336 336 F DEBUG : r4 f72e158c r5 00000006 r6 f72e1534 r7 0000010c
09-17 11:46:21.975 336 336 F DEBUG : r8 ff8502c8 r9 00000003 sl ff850300 fp f726f010
09-17 11:46:21.975 336 336 F DEBUG : ip 00000000 sp ff850260 lr f72c16a7 pc f72c209c cpsr 200f0010
09-17 11:46:22.197 336 336 F DEBUG :
09-17 11:46:22.197 336 336 F DEBUG : backtrace:
09-17 11:46:22.198 336 336 F DEBUG : #00 pc 0004609c /system/bin/linker (__dl_tgkill+12)
09-17 11:46:22.198 336 336 F DEBUG : #01 pc 000456a3 /system/bin/linker (__dl_pthread_kill+34)
09-17 11:46:22.198 336 336 F DEBUG : #02 pc 0003ded9 /system/bin/linker (__dl_raise+10)
09-17 11:46:22.198 336 336 F DEBUG : #03 pc 0003cb11 /system/bin/linker (__dl___libc_android_abort+34)
09-17 11:46:22.198 336 336 F DEBUG : #04 pc 0003bb14 /system/bin/linker (__dl_abort+4)
09-17 11:46:22.198 336 336 F DEBUG : #05 pc 0003da47 /system/bin/linker (__dl___libc_fatal+22)
09-17 11:46:22.198 336 336 F DEBUG : #06 pc 00009c43 /system/bin/linker (__dl__ZL29__linker_init_post_relocationR19KernelArgumentBlockj+3146)
09-17 11:46:22.198 336 336 F DEBUG : #07 pc 00008f63 /system/bin/linker (__dl___linker_init+358)
09-17 11:46:22.198 336 336 F DEBUG : #08 pc 000027c0 /system/bin/linker (_start+4)

Bro i got this
please help me

@sun75
Bravo! Have you opened the new thread for the Wiko Fever yet?
In other news, I have started work on a custom kernel based on the Wiko Fever MM source. I don't have much time to work on it though, so if anyone would like to help you can submit pull requests to the source here.

..

sun75 said:
I fixed LTE in build.prop, but I don't know how to to do a VoLTE patch: I'm not a developer, but a system engineer!
---------- Post added at 11:10 ---------- Previous post was at 10:56 ----------
I have already seen it:
just unpack the boot.img and edit the init.mt6735.rc. Diff format:
--- Line 21:
on init
+ export LD_SHIM_LIBS "/system/lib/libui.so|libshim_ui.so:/system/lib64/libui.so|libshim_ui.so:/system/lib/libgui.so|libshim_gui.so:/system/lib64/libgui.so|libshim_gui.so"
export USBOTG_STORAGE /storage/usbotg
mount tmpfs tmpfs /mnt/media_rw/ mode=0755,uid=1000,gid=1000
mkdir /mnt/media_rw/usbotg 0700 media_rw media_rw
mkdir /storage/usbotg 0700 root root
mount tmpfs tmpfs /storage/usbotg mode=0755,uid=1000,gid=1000
chmod 0666 /dev/kmsg
export USBOTG_STORAGE /storage/usbotg
-----
The export LD_ is ONE LINE!!
And:
---- Line 1286:
# GPS
service agpsd /system/bin/mtk_agpsd
class main
socket agpsd stream 660 gps system
socket agpsd2 stream 660 gps inet
socket agpsd3 stream 660 gps inet
user gps
group gps radio inet sdcard_r sdcard_rw misc
+ setenv LD_SHIM_LIBS "/system/bin/mtk_agpsd|libshim_agps.so"
service wifi2agps /system/bin/wifi2agps
--------
Repack the boot.img and reflash it with sp flash tool!
You have to make sure to have /system/[lib|lib64]/libshim_[agps|gui|ui].so
If you open with an hex editor libshim_agps.so you will find the symbol it'll search for!
---------- Post added at 11:37 ---------- Previous post was at 11:10 ----------
I'll open a Wiko Fever thread today, starting with this release: RR-N-v5.8.3-20170527-e481-Official -> RR-N-v5.8.3-20170527-l5460-Official.
Now I'm working on Stock Kernels only (they work on Stock images, they have to work on custom images... and, by the way, the 3.10.x custom based RR is working with the V39 Stock Kernel...): I miss the point on working with custom Kernels, the hardware is the same, what changes is only the OS layer. Please let me know your point of view, maybe in the Wiko thread, once opened. Thank you!
Click to expand...
Click to collapse
The main reasons for working on a custom kernel are:
To have a more up-to-date kernel (so with extra security and bug fixes)
To remove some unnecessary pre-installed bits making it smaller and therefore faster
Adding more tweaking options, such as custom governors, I/O schedulers, TCP congestion algorithms etc.
Add extra features, such as DT2W and Volte (looking at other android kernel sources helps with this)
Other tweaks and fixed if they come up and are needed
Besides, I'm a developer, and not a systems engineer

..

Thread Updated added TWRP 3.0.0 ported by Rick02
CrDROID and hexagon rom is on development
Hit the thank button

Gratitude
Really thankful to you man! Hats off:victory:
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
Hope my heat issue resolves

Hello,
the Rom works fine and smoothly on my Wiko Fever 4g. The compass, front flash, UKW-Radio and Sim-Contacts are not working but I have restore the Contacts from Google.
When the display is on, it pulls up to 1.7 amps from the battery. I hope that there will be updates with bug fixes and security patches soon.
Otherwise good work.

NobodyDbg said:
Hello,
the Rom works fine and smoothly on my Wiko Fever 4g. The compass, front flash, UKW-Radio and Sim-Contacts are not working but I have restore the Contacts from Google.
When the display is on, it pulls up to 1.7 amps from the battery. I hope that there will be updates with bug fixes and security patches soon.
Otherwise good work.
Click to expand...
Click to collapse
i dont have wiko fever i only support mmx
sun75 will help you

Thanking
I would like to thanks XDA team . I have been waiting for months just for a single update for. MMX canvas 5 . Now this morning I found noighat for my phone . Thank you very much XDA team. Keep it on .

Rahul1436 said:
I would like to thanks XDA team . I have been waiting for months just for a single update for. MMX canvas 5 . Now this morning I found noighat for my phone . Thank you very much XDA team. Keep it on .
Click to expand...
Click to collapse
Thanks goes to Arshjot Singh
Hit the thanks button

Bug in Video playback
Harishwarrior said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage 14.1​
Arshjot singh made an another rom for Micromax Canvas 5.He puts his time ,Skills ,Effort and Brain on the line to make this awesome Rom.
Without wasting any further time. Lets get started.:fingers-crossed:
Requirements:
You must be in stock lollipop rom , whether it's Rooted or Non rooted
How to install :
1. Download and copy the Rom to your SD card.
2. Backup your Rom using TWRP recovery.
3. Format data and Wipe Factory reset your Phone.
4. Flash the Rom.
5. Change the language.
6. Go to developer option, and set the Animation to 0.5
7. Google apps are not included due to some reason. Go the Google apps link,and select ARM 64 as platform , 7.1 as android,pico as variant.download and flash the zip.
8. Dont install Google system webview otherwise your app will crash
Links:
Lineage 14.1 : https://drive.google.com/uc?id=0B9ToB3iQjd_-eWhuTU1tcnFod00&export=download
TWRP 2.8.7.0: https://forum.xda-developers.com/an...overy-twrp-2-8-7-0-micromax-canvas-5-t3641576
TWRP 3.0.0: https://forum.xda-developers.com/android/development/twrp-3-0-0-micromax-canvas-5-e481-t3677085
Google Apps : http://opengapps.org/
Bugs:
1. Front flash (Not necessary)the default camera app has Selfie flash option try that.
2.Compass (Useless) google maps works without Compass.
Heat Fix:
ONLY TRY THIS , IF YOU FACING HEATING ISSUE .Download and Open kernel Aduitor (Grant root permission)and Go to cpu , select apply on boot , Change the maximum frequency to 1040 Mhz .This will reduces the heat.
CREDITS::angel:
Thanks to
Arshjot singh for Lineage
Infinite4evr for TWRP 2.8.7.0
Rick02::fingers-crossed: for TWRP 3.0.0
Harishwarrior(Me) Moderator.
If you have any ideas or bug fix , Post it down.
This post will be updated Daily or Weekly.Stay tuned
Hit the thanks button......
Click to expand...
Click to collapse
Hello,
I assume that you have already observed bug in video playback issue with this rom.
Solution provided here is for high quality videos but the same can not work for low quality videos.
Is there any known fix for low quality video & formats like .3gpp ??

QUIZILLA said:
Hello,
I assume that you have already observed bug in video playback issue with this rom.
Solution provided here is for high quality videos but the same can not work for low quality videos.
Is there any known fix for low quality video & formats like .3gpp ??
Click to expand...
Click to collapse
Try SW Decoder or use stock video player(Gallery)