Unable to flash new SPL +more - myTouch 3G, Magic Android Development

I made the major mistake of flashing the vodafone hero rom to my 32A SHIP S-ON H (nordic htc branded sapphire). After figuring out that I made a bad move, I tried flashing the superhero v2 that I had before, but it still got stuck at the HTC Magic logo right after boot.
Since then, I've tried a lot of things like re-rooting, flashing a different SPL and doing a restore from Nandroid files.
Flashing a different SPL doesn't change the SPL number at the HBOOT screen (tried both the out-of-the-box SPL, the .2005 engineering SPL and the modded .2004 SPL, but when I reboot it's back to HBOOT-1.33.0009.
restoring from nandroid fails with "FAILED (remote: signature verify fail)"
I'm running out of ideas, though I have a hunch that I'm not flashing the SPL correctly
Any help would be very much welcome

HBOOT-1.33.0009 will not let you fastboot flash nandroid images, Although you still should be able to use a modded recovery to reinstall the system.
Did you try installing superhero via the update.zip?

I only tried that once - here goes another try...
EDIT: Shouldn't I still be able to flash a new SPL?
EDIT2: using a modded recovery and flashing superhero gives no errors (though the progress bar stops at ~80% for a while then all of a sudden, it's complete). After rebooting it it gets stuck on the very first "HTC Magic" screen, so it's not getting very far since superhero loads with the "T-mobile G1" screen

losludvig said:
I made the major mistake of flashing the vodafone hero rom to my 32A SHIP S-ON H (nordic htc branded sapphire). After figuring out that I made a bad move, I tried flashing the superhero v2 that I had before, but it still got stuck at the HTC Magic logo right after boot.
Since then, I've tried a lot of things like re-rooting, flashing a different SPL and doing a restore from Nandroid files.
Flashing a different SPL doesn't change the SPL number at the HBOOT screen (tried both the out-of-the-box SPL, the .2005 engineering SPL and the modded .2004 SPL, but when I reboot it's back to HBOOT-1.33.0009.
restoring from nandroid fails with "FAILED (remote: signature verify fail)"
I'm running out of ideas, though I have a hunch that I'm not flashing the SPL correctly
Any help would be very much welcome
Click to expand...
Click to collapse
Try this :
1. Switch your device into fastboot mode.
2. Fastboot this recovery. (fastboot boot recovery-RAv1.0H.img).
3. Perform a data wipe.
4.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img

I get the error /sbin/sh flash_image: not found
I know of the command "which <command>", but when running "adb shell which flash_image" I get only a blank line.
If I do "adb shell which" I get an explanation of the command, so I don't get why it doesn't work...

If you get a blank line it means that busybox can not find the flash_image binary in the directories specified in your PATH variable.
Try the following :
1. Switch your device into fastboot mode.
2. $fastboot boot recovery-RAv1.0H.img
3. Perform a data wipe.
4. $adb shell mount -a
5.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img
If you still get the same flash_image not found error try this :
1. Get the flash_image binary somewhere (if you don't find it I'll upload it later today).
2. Switch your device into fastboot mode.
3. fastboot boot recovery-RAv1.0H.img
4. Perform a data wipe.
5. Push the flash_image binary to your sbin : adb push flash_image /sbin/flash_image
6. Check if it is actually found : adb shell which flash_image
4.
- $adb shell flash_image boot /sdcard/<yournandroidbackupdir>/boot.img
- $adb shell flash_image system /sdcard/<yournandroidbackupdir>/system.img
- $adb shell flash_image recovery /sdcard/<yournandroidbackupdir>/recovery.img
- $adb shell flash_image userdata /sdcard/<yournandroidbackupdir>/userdata.img

can you post the files? I have the same problem with no back up
thanks

I still can't find flash_image, so I would love it if you posted it
EDIT: found flash_image here: http://jf.odiness.com/v1.50/JFv1.50_ADP1.5.zip
pushing flash_image works fine, but "adb shell which flash_image" still returns a blank line.
Also "adb shell flash_image" returns "/sbin/sh: flash_image: Permission denied"

just tried running a "adb shell mount -a" before doing the flash_image command - that made the command work (finally!)
Flashing boot works fine, but flashing system gives some errors:
Code:
C:\Temp\tools>adb shell flash_image system /sdcard/system.img
mtd: erase failure at 0x013c0000 (I/O error)
mtd: erase failure at 0x013c0000 (I/O error)
mtd: skipping write block at 0x013c0000
mtd: erase failure at 0x02d60000 (I/O error)
mtd: erase failure at 0x02d60000 (I/O error)
mtd: skipping write block at 0x02d60000
... Any ideas?
EDIT: After flashing sytem (with errors) and boot, I went ahead and rebooted... After vibrating and displaying the HTC magic bootscreen for a moment it looks like it's changing image (the screen refreshes), though it's to the same HTC magic logo...
Question - are the errors I'm getting when flashing system because two processes are running (flash_image and shell)?

nordic is htc branded right? if so your going to need a rom from here http://forum.xda-developers.com/showthread.php?t=531837

sammypwns said:
nordic is htc branded right? if so your going to need a rom from here http://forum.xda-developers.com/showthread.php?t=531837
Click to expand...
Click to collapse
correct... However I am not able to boot any of the three roms posted there - it's stuck at the very first "HTC Magic" screen after turning on

flash_image does help me a bit - If I flash my back up'ed boot.img I have root access via adb when the phone enters a loop.
Not sure if this is any help but I get this code from doing "adb logcat"
Code:
D/AndroidRuntime( 329):
D/AndroidRuntime( 329): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
D/AndroidRuntime( 329): CheckJNI is OFF
I/dalvikvm( 329): DexOpt: Some deps went away
E/dalvikvm( 329): /system/framework/com.htc.android.easopen.jar odex has stale
dependencies
I/dalvikvm( 329): Zip is good, but no classes.dex inside, and no valid .odex fi
le in the same directory
D/libc-abort( 329): abort() called in pid 329
I/DEBUG ( 31): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *
**
I/DEBUG ( 31): Build fingerprint: 'tmobile/kila/dream/trout:1.5/CRB43/148830
:user/ota-rel-keys,release-keys'
I/DEBUG ( 31): pid: 329, tid: 329 >>> zygote <<<
I/DEBUG ( 31): signal 11 (SIGSEGV), fault addr deadbaad
I/DEBUG ( 31): r0 00000003 r1 deadbaad r2 00000027 r3 ffff6180
I/DEBUG ( 31): r4 ffff6158 r5 afe2ff28 r6 afe39dd0 r7 afe39dd0
I/DEBUG ( 31): r8 00000000 r9 00000000 10 00000000 fp 00000000
I/DEBUG ( 31): ip 0000001a sp be8a54e8 lr afe1ff33 pc afe1066a cpsr 200
00030
I/DEBUG ( 31): #00 pc 0001066a /system/lib/libc.so
I/DEBUG ( 31): #01 pc 0000afae /system/lib/libc.so
I/DEBUG ( 31): #02 pc 00042198 /system/lib/libdvm.so
I/DEBUG ( 31): #03 pc 0005c276 /system/lib/libdvm.so
I/DEBUG ( 31): #04 pc 0005c330 /system/lib/libdvm.so
I/DEBUG ( 31): #05 pc 0005c4b2 /system/lib/libdvm.so
I/DEBUG ( 31): #06 pc 0003c926 /system/lib/libdvm.so
I/DEBUG ( 31): #07 pc 00040f44 /system/lib/libdvm.so
I/DEBUG ( 31): #08 pc 0002b7a6 /system/lib/libandroid_runtime.so
I/DEBUG ( 31): #09 pc 00008bf2 /system/bin/app_process
I/DEBUG ( 31): #10 pc 0001fd22 /system/lib/libc.so
I/DEBUG ( 31): #11 pc 0000bcb2 /system/lib/libc.so
I/DEBUG ( 31): #12 pc b000157e /system/bin/linker
I/DEBUG ( 31): stack:
I/DEBUG ( 31): be8a54a8 0000a000 [heap]
I/DEBUG ( 31): be8a54ac 00069b95 [heap]
I/DEBUG ( 31): be8a54b0 00069b53 [heap]
I/DEBUG ( 31): be8a54b4 00000000
I/DEBUG ( 31): be8a54b8 00069b53 [heap]
I/DEBUG ( 31): be8a54bc fffe637c
I/DEBUG ( 31): be8a54c0 ad083e1c
I/DEBUG ( 31): be8a54c4 250c8c5b
I/DEBUG ( 31): be8a54c8 00000002
I/DEBUG ( 31): be8a54cc ffff6158
I/DEBUG ( 31): be8a54d0 afe2ff28 /system/lib/libc.so
I/DEBUG ( 31): be8a54d4 afe39dd0
I/DEBUG ( 31): be8a54d8 afe39dd0
I/DEBUG ( 31): be8a54dc afe10663 /system/lib/libc.so
I/DEBUG ( 31): be8a54e0 df002777
I/DEBUG ( 31): be8a54e4 e3a070ad
I/DEBUG ( 31): #00 be8a54e8 000699b0 [heap]
I/DEBUG ( 31): be8a54ec afe0e940 /system/lib/libc.so
I/DEBUG ( 31): be8a54f0 000699b0 [heap]
I/DEBUG ( 31): be8a54f4 afe3c980
I/DEBUG ( 31): be8a54f8 00002bb0
I/DEBUG ( 31): be8a54fc fffffbdf
I/DEBUG ( 31): be8a5500 afe39dd0
I/DEBUG ( 31): be8a5504 000699a8 [heap]
I/DEBUG ( 31): be8a5508 00002bb0
I/DEBUG ( 31): be8a550c afe0afb3 /system/lib/libc.so
I/DEBUG ( 31): #01 be8a5510 afe3c980
I/DEBUG ( 31): be8a5514 afe39dd0
I/DEBUG ( 31): be8a5518 afe3c980
I/DEBUG ( 31): be8a551c afe39dd0
I/DEBUG ( 31): be8a5520 0000a000 [heap]
I/DEBUG ( 31): be8a5524 be8a55a0 [stack]
I/DEBUG ( 31): be8a5528 ad083e1c
I/DEBUG ( 31): be8a552c ffffffff
I/DEBUG ( 31): be8a5530 ad083e1c
I/DEBUG ( 31): be8a5534 00000000
I/DEBUG ( 31): be8a5538 fffe637c
I/DEBUG ( 31): be8a553c ad04219b /system/lib/libdvm.so
"adb get-state" returns "device", so I guess it thinks that It's booted up fine.
I was wondering if adb push'ing the system folder of a rom could make my troubles go away, but when I do "adb push /Temp/system/ /system/"
I get "cannot stat '/Temp/system/': No such file or directory" even though the folder exists...
Please help as I'm starting to get desperate

I don't like those erase failures you're getting...

I don't like those erase failures you're getting...
If I were you I would try to perform an erase in fastboot mode first.
Find an update.zip (HTC branded) which includes a full boot and system and copy the update.zip to your sdcard. Maybe try a lite version of one here
1. Switch your device into fastboot mode.
2. Perform an erase (hopefully you don't get any errors while doing this) :
$fastboot erase boot
$fastboot erase system
$fastboot erase recovery
$fastboot erase cache
$fastboot erase userdata
3. $fastboot boot recovery-RAv1.0H.img
wait for a while...
4. update
5. reboot

I have a similar problem. Can set the phone in fastboot usb mode, but my computers wont show anything in devices list. My computer finds and installs the phone as HTC Bootloader when in fastboot usb mode.
Any clue why my computer wont detect my phone propery?
DVT32B
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
My computer finds my G1 as normal if I connect it showing it as HTC Bootloader in Device Manager.
Any help and I'll be very grateful.

perhaps try on ubuntu?

Have tried with XP, Vista, Win7 and Mac.
Not tried Unbuntu yet. Was hoping not to install Unbuntu on any of my computers.

Amon_RA said:
I don't like those erase failures you're getting...
If I were you I would try to perform an erase in fastboot mode first.
Find an update.zip (HTC branded) which includes a full boot and system and copy the update.zip to your sdcard. Maybe try a lite version of one here
1. Switch your device into fastboot mode.
2. Perform an erase (hopefully you don't get any errors while doing this) :
$fastboot erase boot
$fastboot erase system
$fastboot erase recovery
$fastboot erase cache
$fastboot erase userdata
3. $fastboot boot recovery-RAv1.0H.img
wait for a while...
4. update
5. reboot
Click to expand...
Click to collapse
Sadly, that doesn't work either

what i did when i had mine stuck at the first splash (i thot i'd killed my phone too, all partitions were erased at this stage with stock SPL & recovery):
1. enter fastboot
2. $fastboot boot recovery-RAv1.0H.img
3. on phone screen apply update.zip, where update.zip is haykuro's 2005 engineer SPL (dont have the actual filename handy, sorry but u can find it in the SPL collection)
4. power off, enter fastboot again
5. $fastboot flash nandroid backed system, data, misc, boot in order.
6. finally i applied stock SPL update.zip back, not necessary tho.

assembledinnz said:
what i did when i had mine stuck at the first splash (i thot i'd killed my phone too, all partitions were erased at this stage with stock SPL & recovery):
1. enter fastboot
2. $fastboot boot recovery-RAv1.0H.img
3. on phone screen apply update.zip, where update.zip is haykuro's 2005 engineer SPL (dont have the actual filename handy, sorry but u can find it in the SPL collection)
4. power off, enter fastboot again
5. $fastboot flash nandroid backed system, data, misc, boot in order.
6. finally i applied stock SPL update.zip back, not necessary tho.
Click to expand...
Click to collapse
Sadly, I can't flash my SPL (as indicated by the title of the thread)
I guess that it's a hardware fault, and I'm returning my phone...
EDIT: just got home from the store, I got a new phone - no questions asked

Related

Newly launched Micromax w900,Windows Mobile 6.1 looking for Android OS Flash Help.

Hi all, i m new here,
I have been reading this forum and couldnt find thread on how to flash/install Android OS on Windows Mobile 6.1 Professional for Micromax w900.
I have newly purchased a phone "MICROMAX W900" which comes with Windows Mobile 6.1 Professional OS and i m looking to install Android/Maemo OS on it.
So its my request to u all, please point me to it.
Features:
2.0 mega pixel CMOS camera
Windows Mobile 6.1
Pocket MSN
Windows Media Player
Bluetooth
ActiveSync
T-Flash card compatible (Micro SD upto 16 gb)
Touch screen with handwriting recognition
3.2-inch 65K color display
E-mail
Wi-Fi
GPS with integrated MAPS
FM Radio
Here is the Technical specification of phone.
Windows Mobile 6.1 Professional
CE OS 5.2.21041(BUILD 21041.1.6.0)
Processor: Hisilicon-K3
Memory: 81 MB
Expansion slot: In use
Device Info:
ROM VERSION : 01.001.18 IND
ROM DATE: 1/19/2010
RADIO VERSION: 1.07.9324
PROTOCOL VERSION: DV3.0
HARDWARE
CPU: Hisilicon-K3
speed: 460 Mhz
Ram size: 128 MB
Flash size: 256 MB
Data Bus: 32 bit
Storage size: 157.20 MB
Display Resolution: 240x400
Colors: 262144
Identify
Model No: NEXPERIA SY.SOL 5209
Platform: Pocket PC
Thanks for ur time,
Anyways i m happy to provide any more details of the phone, if needed.
Thanks .
just found
hi,
i just found out this.
press & hold
1) volume down + camera key + power key = Factory reset/clean boot
2) Volume up + volume down + power key = Some flashing utility
it gives me this
Checking valid image file
Step 3 error while updating
Card operate : Read retry timeout.
what to do next ?
c'mon guys please help me.
i m really tired of windows mobile os,
Latest update,
I guess i m very closer to find bootloader mode of the phone.
whenever i remove battery and plug USB, windows logo comes and goes and my XP says device not recognized and nothing happens at phone, no 3 stripes of bootloader.
Hello Dear
I am new here. I want to modify my current ROM on Micromax W900. I have surfed and got some info on Updating the ROM. But it says 'Download the ROM for your Device'. I just want to know that from where should I download the ROM for this device.
Thanks in advance...
Regards,
~alliwant
alliwant said:
Hello Dear
I am new here. I want to modify my current ROM on Micromax W900. I have surfed and got some info on Updating the ROM. But it says 'Download the ROM for your Device'. I just want to know that from where should I download the ROM for this device.
Thanks in advance...
Regards,
~alliwant
Click to expand...
Click to collapse
i m still trying to figure that out, but no luck.
i also contacted micromax for giving me technical datasheets of w900, but they said its matter of company protocol issue, IDK what does it means.
anyways, keep trying R n D
TCPMP crash report
i installed tcpmp and while starting it, it gave me crash.txt,
i think here is some useful info. of phone.
Access violation(c0000005) at 784549ec 784549ec)
Read from 784549ec
cpu dump:
R0 = 65bd6f9f
R1 = 00000000
R2 = 65bd6f9f
R3 = ffffcbac
R4 = 01a902d0
R5 = 00012000
R6 = 00012010
R7 = 00000003
R8 = 2595fed8
R9 = 2595fed8
R10 = 784026a8 (common:000016a8)
R11 = 2595fd04
R12 = 65bd6f9f
Sp = 2595fcd8
Lr = 78402798 (common:00001798)
Pc = 784549ec
Psr = 60000010
stack dump:
2595fcd8 783d3f20
2595fcdc 0001318c
2595fce0 2595fed8
2595fce4 86007150
2595fce8 c56d8fd2
2595fcec 783d3f48
2595fcf0 00000000
2595fcf4 66c2252e
2595fcf8 ffffc894
2595fcfc 2595fd04
2595fd00 00011108
2595fd04 00000000
2595fd08 00000000
2595fd0c 87f7b888
2595fd10 00000000
2595fd14 00011424
2595fd18 01ffcc94
2595fd1c 01ffc9e0
2595fd20 2595fed8
2595fd24 66c2252e
2595fd28 ffffc894
2595fd2c 81b05fb8
2595fd30 00000047
2595fd34 66c2252e
2595fd38 00000000
2595fd3c 2595fed8
2595fd40 00000005
2595fd44 87f7b888
2595fd48 00000000
2595fd4c 00011424
2595fd50 01ffcc94
2595fd54 01ffc9e0
2595fd58 2595fed8
2595fd5c 66c2252e
2595fd60 ffffc894
2595fd64 03f66a64
2595fd68 2595fe44
2595fd6c 03f67274
2595fd70 00011424
2595fd74 80000010
2595fd78 2595fdd4
2595fd7c 7c08f544
2595fd80 2595fdac
2595fd84 7c08f544
2595fd88 0000c31b
2595fd8c 03f6bbcc
2595fd90 ffffc894
2595fd94 00000000
2595fd98 0db6af68
2595fd9c 0da90000
2595fda0 0db40000
2595fda4 00000014
2595fda8 86e67de0
2595fdac 00000000
2595fdb0 00000000
2595fdb4 86042940
2595fdb8 81e06d10
2595fdbc 860b6680
2595fdc0 86e67de0
2595fdc4 00000000
2595fdc8 f000fe38
2595fdcc 2595fe10
2595fdd0 81b08744
2595fdd4 00000000
2595fdd8 00004000
2595fddc 00000010
2595fde0 ffffcb48
2595fde4 ffffc894
2595fde8 00000001
2595fdec 81b08c20
2595fdf0 00004000
2595fdf4 00000010
2595fdf8 ffffcb48
2595fdfc 65bd6f9e
2595fe00 66c2252e
2595fe04 00000001
2595fe08 81b05828
2595fe0c 03f66a64
2595fe10 00000000
2595fe14 00000010
2595fe18 66c2252e
2595fe1c 00000000
2595fe20 2595fed8
2595fe24 00000005
2595fe28 01ffc9e0
2595fe2c 00011450
2595fe30 87f7b888
2595fe34 00000000
2595fe38 00011424
2595fe3c 01ffcc94
2595fe40 03f67274
2595fe44 00010000
2595fe48 00000000
2595fe4c 00000000
2595fe50 00000000
2595fe54 00000000
2595fe58 00000001
2595fe5c 00000000
2595fe60 00000000
2595fe64 00000000
2595fe68 00000000
2595fe6c 00000000
2595fe70 00000000
2595fe74 00000000
2595fe78 00000000
2595fe7c 00000000
2595fe80 00000000
2595fe84 00000000
2595fe88 00000000
2595fe8c 00000000
2595fe90 f000fe3c
2595fe94 c203fe7c
2595fe98 81b2819c
2595fe9c 81b2820c
2595fea0 00000000
2595fea4 80000004
2595fea8 00000001
2595feac 00000004
2595feb0 87f7b888
2595feb4 00000000
2595feb8 00000000
2595febc 00010000
2595fec0 006c0070
2595fec4 00790061
2595fec8 00720065
2595fecc 0065002e
2595fed0 00650078
2595fed4 00000000
2595fed8 00000000
2595fedc 00000000
2595fee0 00000000
2595fee4 24000000
2595fee8 00000002
2595feec 00000000
2595fef0 00020000
2595fef4 00000000
2595fef8 2595d000
2595fefc 25940000
2595ff00 7c08f580
2595ff04 2595fe50
2595ff08 00000000
2595ff0c 00000000
2595ff10 00000000
2595ff14 01a919e0
2595ff18 00000000
2595ff1c 00000000
2595ff20 00000000
2595ff24 00000000
2595ff28 00000000
2595ff2c 00000000
2595ff30 00000000
2595ff34 00000000
2595ff38 00000000
2595ff3c 00000000
2595ff40 00000000
2595ff44 00000000
2595ff48 00000000
2595ff4c 00000000
2595ff50 00000000
2595ff54 00000000
2595ff58 00000000
2595ff5c 00000000
2595ff60 00000000
2595ff64 00000000
2595ff68 00000000
2595ff6c 00000000
2595ff70 00000000
2595ff74 00000000
2595ff78 00000000
2595ff7c 00000000
2595ff80 00000000
2595ff84 00000000
2595ff88 00000000
2595ff8c 00000000
2595ff90 00000000
2595ff94 00000000
2595ff98 00000000
2595ff9c 00000000
2595ffa0 00000000
2595ffa4 00000000
2595ffa8 00000000
2595ffac 00000000
2595ffb0 00000000
2595ffb4 00000000
2595ffb8 00000000
2595ffbc 00000000
2595ffc0 00000000
2595ffc4 00000000
2595ffc8 00000000
2595ffcc 00000000
2595ffd0 00000000
2595ffd4 00000000
2595ffd8 00000000
2595ffdc 00000000
2595ffe0 00000000
2595ffe4 00000000
2595ffe8 00000000
2595ffec 00000000
2595fff0 00000000
2595fff4 00000000
2595fff8 00000000
2595fffc 00000000
25960000 ????????
25960004 ????????
25960008 ????????
2596000c ????????
25960010 ????????
25960014 ????????
25960018 ????????
2596001c ????????
25960020 ????????
25960024 ????????
25960028 ????????
2596002c ????????
25960030 ????????
25960034 ????????
25960038 ????????
2596003c ????????
25960040 ????????
25960044 ????????
25960048 ????????
2596004c ????????
25960050 ????????
25960054 ????????
25960058 ????????
2596005c ????????
25960060 ????????
25960064 ????????
25960068 ????????
2596006c ????????
25960070 ????????
25960074 ????????
25960078 ????????
2596007c ????????
25960080 ????????
25960084 ????????
25960088 ????????
2596008c ????????
25960090 ????????
25960094 ????????
25960098 ????????
2596009c ????????
259600a0 ????????
259600a4 ????????
259600a8 ????????
259600ac ????????
259600b0 ????????
259600b4 ????????
259600b8 ????????
259600bc ????????
259600c0 ????????
259600c4 ????????
259600c8 ????????
259600cc ????????
259600d0 ????????
259600d4 ????????
common 78401000-7844c000 obj:0 class:30
General (0x01a917a0)
Language(16)=1600081477
Platform(23)=PocketPC
Ver(25)=502
OS Version(27)=5.02
OEM Info(24)=Hisilicon
TypeNo(26)=1
Model(18)=0
Caps(19)=0x00008001
Processor(17)=ARM 926E
Clock speed(34)=400
ICache(20)=16384
DCache(21)=16384
(37)=10
(38)=0
Advanced (0x01a91ac0)
No backlight keepalive for video(32)=No
Home Screen time out with music playback(45)=No
Old style toolbars(31)=No
No wireless MMX usage(40)=No
Slow video memory(37)=No
Less rotation tearing (slower)(41)=No
Prefer lookup tables over arithmetic(38)=Yes
D-Pad follow screen orientation(56)=Yes
Prefer less buffering over smooth video(54)=No
Use system volume(52)=No
Benchmark from current position(48)=No
Override AVI frame rate based on audio(53)=No
Widcomm BT Audio button support(58)=No
Disable AVC deblocking filter(65)=No
Manual A/V offset +/-(44)=0.00 ms
Soft-drop tolerance(42)=54.99 ms
Hard-drop tolerance(43)=699.95 ms
(59)=No
System Timer (0x01a91e10)
Time(96)=0
Speed(98)=100.00%
Play(99)=No
Wave Output (0x01a91fc0)
Input(32):IN=empty packet format
Input(32):IN=NULL
Output(33):OUT=empty packet format
Total(34)=0
Dropped(35)=0
Volume(81)=100
Mute(82)=No
(89)=0
Quality(83)=2
(90)=No
(91)= (0x01a91fd0)
NULA AOUT p:1 r:1 c: e: p: m:common
OVLA VOUT p:1 r:1 c: e: p: m:common
RAWA FMTB p:1 r:1 c: e: p: m:common
FMTB FMT_ p:1 r:1 c: e: p: m:common
CODC FLOW p:1 r:1 c: e: p: m:common
CCID FLOW p:1 r:1 c: e: p: m:common
NODE p:0 r:1 c: e: p: m:common
FILE STRM p:1 r:1 c:file e: p: m:common
WAVE AOUT p:1 r:1 c: e: p: m:common
RAWI FMTB p:1 r:1 c: e: p: m:common
FMTL FMTM p:1 r:1 c: e: p: m:common
STRM NODE p:1 r:1 c: e: p: m:common
FMTM NODE p:1 r:1 c: e: p: m:common
ADMO CODC p:1 r:1 c: e: p: m:common
STRP FMTM p:1 r:1 c: e: p: m:common
OUTP FLOW p:1 r:1 c: e: p: m:common
ADVP NODE p:1 r:1 c: e: p: m:common
TIMR NODE p:1 r:1 c: e: p: m:common
MEMS STRM p:1 r:1 c: e: p: m:common
PLAT NODE p:1 r:1 c: e: p: m:common
IDCT FLOW p:1 r:1 c: e: p: m:common
SYST TIMR p:1 r:1 c: e: p: m:common
AOUT OUTP p:1 r:1 c: e: p: m:common
VOUT OUTP p:1 r:1 c: e: p: m:common
NULV VOUT p:1 r:1 c: e: p: m:common
FLOW NODE p:1 r:1 c: e: p: m:common
RASX FMTL p:1 r:1 c:
e:asx;wmx;wmweb;wmwebasf;wmwebasx;wvx:V;wax:A
p:and(text,scan(64,stri('<ASX'),0,fwd)) m:common
PLS_ FMTL p:1 r:1 c:audio/x-scpls,audio/scpls els
p:and(text,scan(64,stri('[playlist]'),0,fwd)) m:common
FMT_ FMTM p:1 r:1 c: e: p: m:common
M3U_ FMTL p:1 r:1 c:audio/x-mpegurl,audio/mpegurl e:m3u
p:and(text,gt(512,length),or(eq(lines,1),eq(lines,0))) m:common
This is an Update:
I'm able to successfully extract all the 'dump' files including (Part00.raw, Part01.raw, Part02.raw) and also the '.bin' files from my Micromax using the proper utilities like 'itsutils'. I even successfully converted these files to appropriate 'OS.nb' file. But still i am suffering with some issues and can't able to integrate WM 6.5!
Moreover i think we have to copy the files necessary for Update (.nbk etc.) to the SD Card so that when we enter the Flashing Utility (i.e. Volume Down + Volume Up + Reset) it can automatically update the ROM.
If anyone need help in this beginning procedure please POST a Request here and if anyone would like to help me out for the further procedure please POST a Reply.
Thanks
alliwant said:
This is an Update:
I'm able to successfully extract all the 'dump' files including (Part00.raw, Part01.raw, Part02.raw) and also the '.bin' files from my Micromax using the proper utilities like 'itsutils'. I even successfully converted these files to appropriate 'OS.nb' file. But still i am suffering with some issues and can't able to integrate WM 6.5!
Moreover i think we have to copy the files necessary for Update (.nbk etc.) to the SD Card so that when we enter the Flashing Utility (i.e. Volume Down + Volume Up + Reset) it can automatically update the ROM.
If anyone need help in this beginning procedure please POST a Request here and if anyone would like to help me out for the further procedure please POST a Reply.
Thanks
Click to expand...
Click to collapse
i love u man, u did it.,
if u can copy firmware then, u can upgrade it too., i guess so.
i still couldnt find the key combinations to start bootloader,
I m dying to install any linux distro on it.(maemo/android/dsl)
yes, I would be grateful if u post the method how to do it.
and also i would like to help u by doing experiments on my phone, though i dont know much about it., coz i think i have ****ed my phone already,
it normally doesnt wakes up from sleep mode when battery is less than 40 %.
i also did some reg, changes.
so i m gonna send it to company for sw fix.
and about that, windows 6.5 install, i guess u r right, u have to put files on memory card and boot it in that menu. it will auto upgrade phone.
Thanks a lot. for ur help.
Hello Dear
Well thanks for your Reply. According to me Volume Up + Volume Down + Power is the Bootloader but it automatically skips to Setp:2 or Step:3 and asks for an Update rather than showing the Tri-Color Boot Screen. I think there might be a registry fix or so to fix this problem.
And for extracting the dump follow the Hermes Guide.
Link:
===
wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
If you still face any problem feel free to contact me!
Regards,
~alliwant
wooo hooooo...... am so excited!!!
this finally brings a ray of hope for all W900 users to be able to upgrade their ROMs. Awesome work guys......
yup, my fone does the same. skips straight to
Step 3 Error while updating:
File operate : File does not exist.
Restart the machine?
The only option to select is YES.
Can we ever get WM6.5 or Android or WM7 on this phone??
Well the only problem is to how to Flash the cooked ROM? We don't know the file name and format to be stored in the SD Card so that it automatically Updates when we enter into the Flashing Utility by pressing Volume Up + Volume Down + Reset!
can any of you give a short review of this device. I am thinking of buying this.
How is the performance with stock ROM and especially during navigation ?
Upgrade success to wm6.5
Phew ok guys have successfully upgraded to wm6.5 finally after a long research...
hmmmm so guys now the issue is am stuck with wm6.5 chinese looking to cook a an english rom for the micromax w900. any help to cook will be appreaciated. i tried to cook my own rom from the dumps of the phone but it kind of bricked my phone but was kind of lucky as only the flash area was overwritten.
oh guys one more try to upgrade only if you r really frustrated with the wm6.1. the rom which they had given is far more stable and looks good with spb software.
wm6.5 is fast on micromax.haven't checked much of the software's in wm6.5 as am researching on cooking with english. will give a detailed explanation on how to flash and dump later.on to chinese fix hehe
oh yeah just keep your heads up to get a new phone if it gets bricked
alliwant: alliwant i had done the update with a new rom not with my raw files.. could you give a heads up on how you did it... i got the the os.nb files after using the ruu_signed_rom.nbh and also placing the files part01 and 02 in the same directory..let me know if its a new procedure..
thanks,
Update on micrmx w900
alliwant said:
Well the only problem is to how to Flash the cooked ROM? We don't know the file name and format to be stored in the SD Card so that it automatically Updates when we enter into the Flashing Utility by pressing Volume Up + Volume Down + Reset!
Click to expand...
Click to collapse
alliwant i had done the update with a new rom not with my raw files.. could you give a heads up on how you did it... i got the the os.nb files after using the ruu_signed_rom.nbh and also placing the files part01 and 02 in the same directory..let me know if its a new procedure..
Update: ok never mind.. i did a new rom but with part of my raw files ..it was chinese changed it to english but the rom has minor bugs...anyway thinking to port a wm6.5 rom now ...
Hey i have a micromax w900 and tired with the old OS 6.1. Was desperately looking for an upgrade to 6.5. But im a n00b related to flashing and stuff. How safe is upgrading? Bricking the phone means it can never be recovered to working state? Even by Micromax service center??
If you do create a ROM please share it with us so that all W900 users can benefit from it.
Thanks.
[email protected] said:
Hey i have a micromax w900 and tired with the old OS 6.1. Was desperately looking for an upgrade to 6.5. But im a n00b related to flashing and stuff. How safe is upgrading? Bricking the phone means it can never be recovered to working state? Even by Micromax service center??
If you do create a ROM please share it with us so that all W900 users can benefit from it.
Thanks.
Click to expand...
Click to collapse
sharan.blore: have a look at my post at this thread..
http://forum.xda-developers.com/showthread.php?p=7350563&posted=1#post7350563
i have cooked only 6.1 successfully..i will post it once i get some time in the office
it can not be recovered by you..though service center could replace the logic board on the phone so no issues if you have the warranty intact..
Hi Guys, Great work... so far so Good... As a W900 user with 6.1 let me tell you that this phone serves no purpose.
Reason is .... will not sync with Systems running Windows 7.
I demanded an upgrade to win 6.5 at the service center, where they after making various calls advised me not to,,, compatibility issues with the screen... Goes blank they say.
Your inputs would be much appreciated & do keep up the great work.
P.s, has there been any hardware mods in the phone ?
try this
Micromax w900 phone To enter Factory reset menu
just follow the steps....
press & hold volume down + camera + power i get factory reset option on screen
then just press volume UP to confirm..
then all is done ur set is ok now
if u like my post just press thanks button

[GUIDE + Microphone Fix][NOOB Friendly] Port CM9 / CM10 Based Roms

Intro​
Code:
/* Last Time i got multiple Requests how to FIX Ril in CM9/CM10 Based Roms
/* Now, i figured out how to get the Mic working and how to port the
/* CM10/CM9 Based Roms, with extended explaining how to and
/* logcats with the problem what needs to be fixed!
/* This Thread tell you all Informations and will show Picture based
/* Informations also ;)
Now lets start ^^
Step 1​
Its quietly easy:
-extract both Roms in two folders, like the base Rom (CM9/CM10 from your Device) in a Folder named Port and the (CM9/CM10 based) Rom from the Device from that u wanna port in a Folder like "Orig/Original"
Picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Now delete the following Folders in "Port" Folder (the specific folders are placed in /system): /app ; /framework ; /fonts ; /media
Picture:
- Open both Folders once more and move the /app ; /framework ; /fonts ; /media folder from "Original/system" Folder in the "Port/system" Folder
Picture:
-Now u have the basic thing in it
Click to expand...
Click to collapse
Step 2​
- now delete from the "Port/system/lib" Folder this File: android_runtime.so
- Now move the android_runtime.so from the "Original/system/lib" Folder in the "Port/system/lib" Folder ^^
Picture:
- Now u need to modify the build.prop (Notepad++)! Open both in Notepad+ and delete the "ro.build.description=
ro.build.fingerprint=" Line from the original build.prop!
- Open the build.prop from the "Original/system Folder" and copy the "ro.build.description=
ro.build.fingerprint=" Lines
- Now re-open the build.prop from the the "Port/system" Folder and paste the lines below "# Do not try to parse ro.build.description or .fingerprint" Line!
Picture:
Now save it
-Zip all Folders and Files in the "Port" Folder!
-Try to flash it and try to BOOT it ... (I think that it wont boot)
Click to expand...
Click to collapse
Step 3​
I think it wont boot (U will see a long time the Bootanimation and nothing will happen)
Its just a lib related error:
Code:
F/libc ( 449): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)
I/DEBUG ( 117): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 117): Build fingerprint: 'lge/thunderg/thunderg:2.3.3/GRI40/LG-P500-V20h.19D34B612E:user/release-keys'
I/DEBUG ( 117): pid: 449, tid: 449 >>> system_server <<<
I/DEBUG ( 117): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadbaad
I/DEBUG ( 117): r0 deadbaad r1 0000000c r2 00000027 r3 40000000
I/DEBUG ( 117): r4 00000000 r5 00000080 r6 4b048987 r7 be9f9778
I/DEBUG ( 117): r8 40813200 r9 00000006 10 46218e1c fp fffffe50
I/DEBUG ( 117): ip ffffffff sp be9f9740 lr 4001f377 pc 4001b7c2 cpsr 00000030
I/DEBUG ( 117): d0 3fe99999a0000000 d1 3ff0000000000000
I/DEBUG ( 117): d2 bebbbc6c1a570a20 d3 3f1155e54e7e8408
I/DEBUG ( 117): d4 bfb1be5a93a83e1d d5 4000000000000000
I/DEBUG ( 117): d6 4a066ec000000000 d7 000000344d520d0c
I/DEBUG ( 117): d8 0000000000000000 d9 0000000000000000
I/DEBUG ( 117): d10 0000000000000000 d11 0000000000000000
I/DEBUG ( 117): d12 0000000000000000 d13 0000000000000000
I/DEBUG ( 117): d14 0000000000000000 d15 0000000000000000
I/DEBUG ( 117): scr 80000010
I/DEBUG ( 117):
I/DEBUG ( 117): #00 pc 000177c2 /system/lib/libc.so
I/DEBUG ( 117): #01 pc 0000c658 /system/lib/libnativehelper.so (jniRegisterNativeMethods)
I/DEBUG ( 117):
I/DEBUG ( 117): code around pc:
I/DEBUG ( 117): 4001b7a0 1c2bd00c 2d00682d e027d1fb 2a0068da ..+.-h.-..'..h.*
I/DEBUG ( 117): 4001b7b0 4b16d004 447b2001 47906018 22274814 ...K. {D.`.G.H'"
I/DEBUG ( 117): 4001b7c0 70022580 ef6ef7f4 f7f62106 aa01e80c .%.p..n..!......
I/DEBUG ( 117): 4001b7d0 05692400 60546091 20061c11 f7f59401 .$i..`T`... ....
I/DEBUG ( 117): 4001b7e0 a905ebc8 20022200 ebd0f7f5 ef5af7f4 .....". ......Z.
I/DEBUG ( 117):
I/DEBUG ( 117): code around lr:
I/DEBUG ( 117): 4001f354 4b0db5f0 447bb083 681c2600 68a59001 ...K..{D.&.h...h
I/DEBUG ( 117): 4001f364 e0086867 5ea8220c dd032800 99011c28 gh...".^.(..(...
I/DEBUG ( 117): 4001f374 43064788 3f013554 6824d5f4 d1ee2c00 .G.CT5.?..$h.,..
I/DEBUG ( 117): 4001f384 1c30b003 46c0bdf0 0002818e 1c0fb5f0 ..0....F........
I/DEBUG ( 117): 4001f394 b0891c3d a9064355 604d9103 90064914 =...UC....M`.I..
I/DEBUG ( 117):
I/DEBUG ( 117): memory map around addr deadbaad:
I/DEBUG ( 117): be9da000-be9fa000 [stack]
I/DEBUG ( 117): (no map for address)
I/DEBUG ( 117): (no map above)
I/DEBUG ( 117):
I/DEBUG ( 117): stack:
I/DEBUG ( 117): be9f9700 00000002
I/DEBUG ( 117): be9f9704 7b4c2d14
I/DEBUG ( 117): be9f9708 40047774 /system/lib/libc.so
I/DEBUG ( 117): be9f970c 4004c8bc
I/DEBUG ( 117): be9f9710 00000000
I/DEBUG ( 117): be9f9714 4001f377 /system/lib/libc.so
I/DEBUG ( 117): be9f9718 4b04753a /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f971c 4001e0dd /system/lib/libc.so
I/DEBUG ( 117): be9f9720 ffffffff
I/DEBUG ( 117): be9f9724 00000000
I/DEBUG ( 117): be9f9728 00000000
I/DEBUG ( 117): be9f972c 4b048987 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9730 be9f9778 [stack]
I/DEBUG ( 117): be9f9734 4001e4f5 /system/lib/libc.so
I/DEBUG ( 117): be9f9738 df0027ad
I/DEBUG ( 117): be9f973c 00000000
I/DEBUG ( 117): #00 be9f9740 00000002
I/DEBUG ( 117): be9f9744 00000100
I/DEBUG ( 117): be9f9748 4b045169 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f974c 7b4c2d14
I/DEBUG ( 117): be9f9750 0000002b
I/DEBUG ( 117): be9f9754 fffffbdf
I/DEBUG ( 117): be9f9758 0000f2c8 [heap]
I/DEBUG ( 117): be9f975c 40849fdd /system/lib/libdvm.so
I/DEBUG ( 117): be9f9760 0000f2c8 [heap]
I/DEBUG ( 117): be9f9764 401d665b /system/lib/libnativehelper.so
I/DEBUG ( 117): #01 be9f9768 40849fdd /system/lib/libdvm.so
I/DEBUG ( 117): be9f976c 401d665b /system/lib/libnativehelper.so
I/DEBUG ( 117): be9f9770 4b04aac4 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9774 00000004
I/DEBUG ( 117): be9f9778 0000f2c8 [heap]
I/DEBUG ( 117): be9f977c 74800019
I/DEBUG ( 117): be9f9780 00000028
I/DEBUG ( 117): be9f9784 4b048987 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9788 0000f2c8 [heap]
I/DEBUG ( 117): be9f978c 00012830 [heap]
I/DEBUG ( 117): be9f9790 00000000
I/DEBUG ( 117): be9f9794 4b04522d /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f9798 00012b88 [heap]
I/DEBUG ( 117): be9f979c 4b0473c1 /system/lib/libandroid_servers.so
I/DEBUG ( 117): be9f97a0 001fc710 [heap]
I/DEBUG ( 117): be9f97a4 00012830 [heap]
I/DEBUG ( 117): be9f97a8 00000000
I/DEBUG ( 117): be9f97ac 4b0473ef /system/lib/libandroid_servers.so
D/Zygote ( 408): Process 449 terminated by signal (11)
I/Zygote ( 408): Exit zygote because system server (449) has terminated
What is easy to fix: Replace the android_servers.so in "Port/system/lib" Folder with the one in Original/system/lib Folder
Picture:
Now re-zip all Files and Folders in the /Port Folder and it should boot now after u flashed it!
Click to expand...
Click to collapse
Step 4​
Maybe u get always a Phone FC Error or no one can hear u while u are calling someone! :silly:
Thats an Ril related error
Now u think, what should i do, right?
Hmm u need to decompile both framework.jar´s from "Port/system/framework/" and the one from ur base zip like CM9 or CM10 from your device!
u need apktool for that, its not related for framework.jar´s when u have a gingerbread apktool (1.4.3) or an ics one! its only related that u know how to decompile, recompile and repack the jar (winrar)
rename the framework.jar from your CM9 or CM10 (your Device, NOT FROM THE "PORT" Folder) to framework-orig.jar and put it in apktool folder!
Place the framework.jar from the "Port" folder also in the apktool folder
Now 2 simple commands in apktool cmd window:
Code:
apktool d framework-orig.jar
and
Code:
apktool d framework.jar
let it decompile and close the window only when there is a word: "Done"!
Now open framework.jar.out folder and framework-orig.jar.out folder, yet open in both folders: /smali/com/android/internal/telephony ^^
copy all files which start with RIL and end with .smali and placed in the framework-orig.jar.out/smali/com/android/internal/telephony Folder and put it in the framework.jar.out/smali/com/android/telephony Folder (replace them all)
Some Devices have in build.prop a specific Ril Class Path! Mine is: "ro.telephony.ril_class=JellaxyRIL" urs can variate after the "="! If this is the case, look once more in framewok-orig.jar.out/smali/com/android/internal/telephony and search for "JellaxyRIL" or how ur´s is called after "=" in the RIL Class
Now copy the "JellaxyRIL.smali" (Its the one from my base Rom) or whatever in the other Folder "framework.jar.out/smali/com/android/telephony" !
Now re-compile it:
Code:
apktool b framework.jar.out
let it compile, it takes a few minutes (depends on ur PC Speed)
Now open the framework.jar from "apktool" Folder with WinRAR
and move the classes.dex from "apktool/framework.jar.out/build/apk in the opened WinRAR Window and let it re-pack, now close the Windows (WinRAR) and move the new framework.jar from /apktool in "Port/system/framework"
Voila, Mic Working and no more Phone FC´s!
If u have a problem with it, pm me with the following files:
framework.jar (from the Rom u wanna port), framework.jar (from your base CM10 or CM9) and your build.prop (from ur base CM10 or CM9)
Click to expand...
Click to collapse
Step 6​
May barebone your Rom will improve the stability
Some apps u can remove:
*QuickSearchBox.apk
*STK.apk
*GoogleMail.apk (Mail.apk is still included, so why there should be 2 Mail Apps )
*Term.apk (Terminal Emulator)
*Voice Dialer (Its not the phone and takes also no effect to it)
*VideoEditor.apk (WTF who wants to cut Videos over android 0.o
oh i forgot about that step:
move from "Port/system/etc/permissions" Folder, all Files to "Original/system/etc/permissions" Folder (Replace them) and move them all back to "Port/system/etc/permissions" Folder! One more Thing: if Superuser isn´t working, take the "su File from "Original/system/xbin" and move it to "Port/system/xbin" Folder and replace it!
Click to expand...
Click to collapse
In case the Rom wont boot or u cant do any step bcoz u wont understand it:​
My support: Only over Facebook
Click to expand...
Click to collapse
For the reply "Rom wont boot! Pls help me ", i wont read it!
U need to add the related things i provide now:
Code:
Logcat:
Rom (u wanna port):
Rom Link:
Base Rom:
Base Rom Link:
Your Device:
Click to expand...
Click to collapse
nice guide. gonna try this sometimes
Syfer_Fever said:
nice guide. gonna try this sometimes
Click to expand...
Click to collapse
can u explain me if i want to port CM 10 from mini to my fit so what do i do.
which is the port rom and original rom.
totally confused.
don't understand base rom and etc stuffs. lil explanation need. plz help
creativeguy09 said:
can u explain me if i want to port CM 10 from mini to my fit so what do i do.
which is the port rom and original rom.
totally confused.
don't understand base rom and etc stuffs. lil explanation need. plz help
Click to expand...
Click to collapse
i think you just replace "usr" folder from cm10-beni to ROM you wanna port and replace the kernel with ours, if the ROM dosen't boot try Step 2
if you still confuse maybe you can ask the OP
Syfer_Fever said:
i think you just replace "usr" folder from cm10-beni to ROM you wanna port and replace the kernel with ours, if the ROM dosen't boot try Step 2
if you still confuse maybe you can ask the OP
Click to expand...
Click to collapse
IN FOLDER PORT Put in the Rom from your device! and in ORIGINAL the Rom u wanna port
To Syfer_Fever: Should i ad a video that u understand it? :silly:
It takes no effect if u replace the /usr folder with the same /usr folder!
DQiB said:
IN FOLDER PORT Put in the Rom from your device! and in ORIGINAL the Rom u wanna port
To Syfer_Fever: Should i ad a video that u understand it? :silly:
It takes no effect if u replace the /usr folder with the same /usr folder!
Click to expand...
Click to collapse
video? for me? for what?
to get soft key button works because mini don't have soft button
hi dqib can you make guide how to port stock based rom from other device like gio,y etc...waiting for guide
Syfer_Fever said:
video? for me? for what?
to get soft key button works because mini don't have soft button
Click to expand...
Click to collapse
last time i tell it u!
All files out of /app ,/framework ,/media ,/fonts
are completely the same (BCOZ YOU USE THE LATEST CM9 OR CM10 for GALAXY FIT and not the ROM FROM GALAXY MINI )
DQiB said:
last time i tell it u!
All files out of /app ,/framework ,/media ,/fonts
are completely the same (BCOZ YOU USE THE LATEST CM9 OR CM10 for GALAXY FIT and not the ROM FROM GALAXY MINI )
Click to expand...
Click to collapse
lol relax "mr.all know everything" you are using capslock seems your childish is out
don't be arrogant, you should tell people who don't know nicely
yes my friend yes sir if u will make a video i would be really thankful and grateful to u. i'm following your instructions but a video would be helpful. great work thanks.
by the way as a personal thought which is the best rom to use for fit. i'm using CM7 currently original one.
I make a kitchen for porting ...
It should be easier for u
Sent from my GT-S5660 using xda app-developers app
? Sorry what u saying kitchen? I don't understand
Sent from my GT-S5670 using xda app-developers app
it helps u t odo it! (porting)
U only need to edit the build.prop and zip the rest ^^
(RIL Fix also, thats manual) :laugh:
Please give the link of working kitchen for our Samsung galaxy fit and apktool also. I have a kitchen file but it's only for HTC roms
Sent from my GT-S5670 using Tapatalk 2
---------- Post added at 10:42 PM ---------- Previous post was at 10:39 PM ----------
DQiB said:
I make a kitchen for porting ...
It should be easier for u
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Please give the link of working kitchen for our Samsung galaxy fit and apktool also. I have a kitchen file but it's only for HTC roms
Sent from my GT-S5670 using Tapatalk 2

[ROM][2.3.8][OFFICIAL][BUILD #1] CyanMobileX Compiled From Source [15/01/2013]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the Cyanmobile eXperience
Hey there peeps, I compiled a new ROM for the HTC Sapphire -- CyanMobile!
It's made by the CyanMobile team, led by Squadzone.
Here's a short description (according to https://raw.github.com/CyanMobile/android_cyanmobile/gingerbread/Definitions.txt) with grammar edited by me:
What is CyanMobile?
CyanMobile is an aftermarket ROM like CyanogenMod, MIUI, JoyOS, LewaOS and others that are built from source. It is based on CyanogenMod 7 (Gingerbread v2.3.7) and uses modifications from AOSP and AOKP
Thanks To CyanogenMod Team, AOKP Team, and AOSP Team for Their Work
**********************************************************************************************************************
** CyanMobile is Short of " *Cyan* (CyanogenMod) *Mob* (Mobiling) *I* (Improving) and *L* (Let's) *E* (Experiment)" **
**********************************************************************************************************************
All features are based on what uses do and what users need with a lots of improvement here and there.
This ROM optimizes Gingerbread, but uses updates from other branchs (ICS stuff, AOSP and AOKP) with reverse engineering or backporting skill.
It can be used without needing to have any Google application installed....
Let us show you what is in CyanMobile:
====================================================================================================
1. Statusbar :
* Date
- Show/Hide Date
- Date Colour
* Notications
- Ticker Color
- No Title Color
- Latest Title Color
- Ongoing Title Color
- Clear Label Button Color
- Title Color
- Item Color
- Time Color
- Tile View [ Android 4.2 ]
* Icons
- Show/Hide Notification Icons
- Show/Hide Statusbar Icons
- Show/Hide Headset/Alarm/Bluetooth/Gps/Sync/Wifi/3G/4G Icon
* Clock
- 4 Clock styles (Right, Left, Center and Hide)
- Clock Color
- Clock Font Size
* Carrier label
- Show/Hide Carrier Label
- Bottom Carrier Label
- 3 Carrier Label On Statusbar Styles (Right, Left and Center)
- Carrier Label Color
- 4 Carrier Logo Styles (Right, Left, Center and Custom Logo)
* Signal
- 5 Different Styles (Bars, Text, Text w/dBm, text w/Auto Color and Hide)
- Wifi Signal Text
* Battery
- 7 Different Styles (Icon, Percentage, Top Statusbar, Side Bar, Behind Statusbar, Navigation Bar and Hide)
- 3 Different Battery Percentage Format (Default, Percentage and Full Color)
- Statusbar Battery Color
* Power Widget
- 4 Different Layouts (Default, Bottom, Grid and Tab)
- Music Widget
- Grid Layout Customizing
* Misc
- Refactor New Statusbar Layout
- Power Clock
- Power Date
- Weather PopUp
- Shortcut Button
- Show/Hide Statusbar
- Reverse Statusbar Icons And Layout
- Statusbar Brightness Control
- Statusbar Fonts Size
- Statusbar Icons Size
- Statusbar Height Size
- Statusbar Background
- Statusbar Background Color
- Notification Background
- Notification Background Color
====================================================================================================
2. Framework :
* Lockscreen
- 7 Different Lockscreen Styles (Sliding Tab, Rotary, Lense, Ring, Honeycomb (beta), Circular (alpha) , Sense (Beta) , Jellybean Glow (Beta) and Jellybean Pad (BETA) )
- Lockscreen Widget Color
- Sms/Call Notifications
- Fuzzy Clock
- Kanji Clock
- Custom Text Lockscreen
- Widget Layouts
- Pattern Styles
* Power Saver
- Screen Off Data Action
- Data Action Delay
- Sync Action
- Sync Time Interval
- Screen Off Wifi Action
- Sync Data Usage
- Mobile Data Preference
* Application
- Native A2SD Framework Core
- Installation Place
* Display
- Bravia Engine
- Rotation Animation
- Window Animations
- Transition Animations
- LCD Density
* Input
- Quick Key Behavior
- Enable/Disable Vibrate on Shutdown
- Explorer Key
* Power Menu
- Show/Hide Power menu/Silent/Airplane/Profile/Screenshot/Power saver/Hibernate/Suspend Toggles
* Fonts
- Change Fonts System
- Change Fonts Type
* OverScroll
- Effect
- Color
- Weight
* Core Replacer
- Change System Apk
- Change Framework Apk/Jar
* Boot/Shutdown animation and Sound
- Preview
- Change Bootanimation
- Change Shutdownanimation
- Change Bootsound
- Reset
* Misc
- New Notifications Design
- Intruder Alert is Life
- New Dialog Design
- Backported Some Apis From Jellybean
- Clear Market Data
- Global Text Color Change
- Global App Background Change
- Soft Button Statusbar
- Navigation Button Bar
- Choose Navi Button
- Navigation Button Bar Size
- Navigation Bar Background
- Extend Power Menu
- Remap Volume Keys
- Lock Volume Keys
- Volume Key Beeps
- Swap Volume Keys
- Task Switcher
====================================================================================================
3. Sound :
* Features
- Loop Ringtone
- Flip Down To Mute Ringer/Snooze Alarm
- Increasing Ringtone Volume
- Less Frequent Notification Sound
- Battery Full/Low Alert
- Charging Plug/Unplug Sound
====================================================================================================
4. Tethering :
* Features
- Bluetooth Tether
- Auto Usb Tether
====================================================================================================
5. Phone :
* Features
- Smart Phone Call
- Back Button To End Call
- Menu Button To Answer Call
- Reject Call with Message
- Allow Incall UI Touch
- Call Me Louder While Inside Bags
- Speed Dials
- Video As Ringtone
- Ring Delay
- Export/Import SIM Contacts
====================================================================================================
6. Messaging :
* Features
- Bubble/Black/Transparent Theme
- Smart Phone Call
- Hide Avatar
- Strip Unicode
- Emoji Support
- Convo List/Subject Font Size
- Sms Vibrate Morse
- Brutal Sender
- Sms PopUp
====================================================================================================
7. Music :
* Features
- Shake To Next/Prev/Play/Pause/Shuttle Track
- Favorite Folder
- Flip To Play/Pause
- Smooth Play Track
====================================================================================================
8. Locations :
* Features
- Enable/Disable Assisted GPS
- GPS Tracker Performance
- Security Device Finder
====================================================================================================
9. Performance :
* Features
- New I/O Scheduler Option
- New Dithering Support
- Enable Bootsound
- Bootsound Volume
- Enable Shutdownanimation
- Gmaps Hack
- KSM Settings
- Battery Polling
- Low Mem Killer Option
- Scrolling Option
- SD Read Ahead Size option
- Screen Off Max CPU Freq
====================================================================================================
10. Misc :
* Features
- ADWLauncher Improved
- Browser Improved
- Calculator Improved
- FM Radio Improved
- File Manager Updated
- SIM ToolKit Improved
- Screenshots Improved
- Task Manager
- Voice Dialer Improved
====================================================================================================
11. All Binary and Library is up to Date
====================================================================================================
That's it, other features not mentioned here came from CyanogenMod 7
Don't Use Any Scripts Like Link2SD, Bravia Hack, Xloud etc They Are Inbuilt !!
Click to expand...
Click to collapse
To Find OUT the features, YOU NEED TO PLAY AROUND WITH THE ROM xD
CyanMobile tries to improve all hardware functions and is always adding new features so it may have some bugs and requires user feedback to fix the bugs.
DONATION:
Donate to Keyur Maru
Donate to Squadzone
Check Next Post For What's Working ! and What's Not !
=======================
Cyan MoBiLe eXperiance
=======================
What's Working in it ? [ Hope so ]
-Network
-HW
-Audio
-Video
-Cam
-DAMM SMOOTH
-Sensors
What's Not Working ? [ Hope so ]
-You Need to Tell me xD
For Change Log Check Next Post
Change Log for Build #1 [16/01/13]
Initial Release for Sapphire
*****Please Read the Flashing Instructions !*****
Screenshots From Wildfire Buzz , LGE P500 And Galaxy Fit
This are From Other Devices Please Provide me From Sapphire Thank you !
DownLoadS
Current Version
Click to expand...
Click to collapse
update-CyanMobile-eXperience-DS-20130116-Release.zip
Click to expand...
Click to collapse
Click that image to start download of latest rom
Google Apps
Click me to Advance the Exploit [ Google APPS ]
***Important***​
How To Flash The Rom xD * IMPORTANT *
-Click Thanks , Rate The Thread And Press Newsworthy Thread ( OPTIONAL BUT * HIGHLY RECOMMENDED * )
-Download The Rom
-Wipe ALL
-Flash The Rom
-Reboot From Recovery
-Now Wait for 3-4 Minutes
-Rom Will Not Boot
-Now Remove Battery
-Reinsert Battery
-Now Start The Phone
-It will Boot up Now
-Enjoy The Rom
Hello,
CMX Users Now I had setted up CMX BuildBot !! Now you could always check status of the builds !!
Keep your eyes here : http://builder.pecancm.insomnia247.nl/job/CyanMobile-Builds/
It is Not Building Only for Sapphire It is Building LG P350 , LG P500 , HTC Buzz and More Devices to be added in future !!
DONATION:
Donate to Keyur Maru For Buying this Phone So I can Provide Further Updates
Donate to Sqadzone
I will be ur tester. sound like a good ROM.
could you include some pics or screen capture? thanks for your effort on our magic.
I want to test this rom. But I can't see link of the rom.
It is released
I have a HTC magic 32A device but I could not find rom for it.
hanntbk said:
I have a HTC magic 32A device but I could not find rom for it.
Click to expand...
Click to collapse
there is important information missing...
is this for 32A or 32B?
if it is for 32A, is it for old radio or new radio?
Thanks!
blizard80 said:
there is important information missing...
is this for 32A or 32B?
if it is for 32A, is it for old radio or new radio?
Thanks!
Click to expand...
Click to collapse
Is official cm7 for 32A or 32B !! it is same as cm7!
Cm7 is not officially available to sapphire.
So I can flash that file in either a 32A old radio or new radio? Has auto kernel?
I will test later.
Thank you!
Sent from my BlackBerry 9900 using Tapatalk
blizard80 said:
Cm7 is not officially available to sapphire.
So I can flash that file in either a 32A old radio or new radio? Has auto kernel?
I will test later.
Thank you!
Sent from my BlackBerry 9900 using Tapatalk
Click to expand...
Click to collapse
What the hell!!!! I compiled with mods to this device config it says it is for dream_sapphire https://github.com/CyanogenMod/android_device_htc_dream_sapphire
so this is not for this device ?
first, thanks for releasing this for the sapphire.
what i was saying is that CM7 is not supported by cyanogen as you see here:
http://get.cm/?device=dream_sapphire
there are differences in kernel for 32A and 32B... thats why i'm asking.
i can't test it right now but i will do it later and i will report.
thanks for this release.
blizard80 said:
first, thanks for releasing this for the sapphire.
what i was saying is that CM7 is not supported by cyanogen as you see here:
http://get.cm/?device=dream_sapphire
there are differences in kernel for 32A and 32B... thats why i'm asking.
i can't test it right now but i will do it later and i will report.
thanks for this release.
Click to expand...
Click to collapse
But i can see gingerbread tree here https://github.com/CyanogenMod/android_device_htc_dream_sapphire/tree/gingerbread
I don't know why cm is not releasing gb builds ? please someone test it and tell me results !!
I can not install ...
(status 7)
Instalation aborted
HTC Magic 32A Eng S-OFF
katurras said:
I can not install ...
(status 7)
Instalation aborted
HTC Magic 32A Eng S-OFF
Click to expand...
Click to collapse
If you can flash CM7 you should be able to flash this!
katurras said:
I can not install ...
(status 7)
Instalation aborted
HTC Magic 32A Eng S-OFF
Click to expand...
Click to collapse
What hboot and/or radio?
I get that error, but updated the hboot and radio et voila!
It works
BTW I installed the hboot and radio from here
PD: I flashed the ROM but it does not boot.
I get many errors.....
D/AndroidRuntime( 145): >>>>>> AndroidRuntime START com.android.internal.os.Zyg
oteInit <<<<<<
I/AndroidRuntime( 145): Heap size: -Xmx16m
D/AndroidRuntime( 145): CheckJNI is OFF
W/dalvikvm( 145): Exception Ljava/util/regex/PatternSyntaxException; thrown whi
le initializing Landroid/graphics/Rect;
I/dalvikvm( 145): Rejecting re-init on previously-failed class Landroid/graphic
s/Rect; v=0x0
E/dalvikvm( 145): Class lookup Ljava/lang/NoClassDefFoundError; attempted while
exception Ljava/lang/ExceptionInInitializerError; pending
I/dalvikvm( 145): DALVIK THREADS:
I/dalvikvm( 145): (mutexes: tll=0 tsl=0 tscl=0 ghl=0 hwl=0 hwll=0)
I/dalvikvm( 145): "main" prio=5 tid=1 RUNNABLE
I/dalvikvm( 145): | group="main" sCount=0 dsCount=0 obj=0x40196198 self=0xce4
0
I/dalvikvm( 145): | sysTid=145 nice=0 sched=0/0 cgrp=default handle=-13450024
00
I/dalvikvm( 145): at dalvik.system.NativeStart.main(Native Method)
I/dalvikvm( 145): at dalvik.system.NativeStart.main(Native Method)
I/dalvikvm( 145):
E/dalvikvm( 145): VM aborting
I/DEBUG ( 79): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *
**
I/DEBUG ( 79): Build fingerprint: 'tmobile/opal/sapphire/sapphire:2.2.1/FRG8
3/60505:user/release-keys'
I/DEBUG ( 79): pid: 145, tid: 145 >>> zygote <<<
I/DEBUG ( 79): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr deadd00
d
I/DEBUG ( 79): r0 fffffec4 r1 deadd00d r2 00000026 r3 00000000
I/DEBUG ( 79): r4 aca9e5c0 r5 0000ce40 r6 aca9e5c0 r7 00000000
I/DEBUG ( 79): r8 00000000 r9 00000000 10 00000000 fp 00000000
I/DEBUG ( 79): ip aca9e720 sp bef529d0 lr afd19919 pc aca3fb66 cpsr 200
00030
I/DEBUG ( 79): #00 pc 0003fb66 /system/lib/libdvm.so (dvmAbort)
I/DEBUG ( 79): #01 pc 00064a52 /system/lib/libdvm.so
I/DEBUG ( 79): #02 pc 00064cee /system/lib/libdvm.so (dvmFindSyst
emClassNoInit)
I/DEBUG ( 79): #03 pc 00064d06 /system/lib/libdvm.so (dvmFindSyst
emClass)
I/DEBUG ( 79): #04 pc 0003f2ba /system/lib/libdvm.so (dvmThrowCha
inedException)
I/DEBUG ( 79): #05 pc 0003f31c /system/lib/libdvm.so (dvmThrowCha
inedExceptionWithClassMessage)
I/DEBUG ( 79): #06 pc 000628d4 /system/lib/libdvm.so
I/DEBUG ( 79): #07 pc 0006476a /system/lib/libdvm.so (dvmInitClas
s)
I/DEBUG ( 79): #08 pc 00046e2c /system/lib/libdvm.so
I/DEBUG ( 79): #09 pc 000585e8 /system/lib/libandroid_runtime.so
I/DEBUG ( 79): #10 pc 0005863a /system/lib/libandroid_runtime.so
(_Z34register_android_graphics_GraphicsP7_JNIEnv)
I/DEBUG ( 79): #11 pc 000357f6 /system/lib/libandroid_runtime.so
I/DEBUG ( 79): #12 pc 0003582c /system/lib/libandroid_runtime.so
(_ZN7android14AndroidRuntime8startRegEP7_JNIEnv)
I/DEBUG ( 79): #13 pc 000358f6 /system/lib/libandroid_runtime.so
(_ZN7android14AndroidRuntime5startEPKcb)
I/DEBUG ( 79): #14 pc 00008ca2 /system/bin/app_process
I/DEBUG ( 79): #15 pc 000153e0 /system/lib/libc.so (__libc_init)
I/DEBUG ( 79):
I/DEBUG ( 79): code around pc:
I/DEBUG ( 79): aca3fb44 2006447a ecc8f7d1 20004c09 edf0f7d1
I/DEBUG ( 79): aca3fb54 447c4808 6bdb5823 d0002b00 49064798
I/DEBUG ( 79): aca3fb64 700a2226 ee5cf7d1 000435c5 00045183
I/DEBUG ( 79): aca3fb74 0005ea66 fffffec4 deadd00d b510b40e
I/DEBUG ( 79): aca3fb84 4c0a4b09 b083447b aa05591b ca026b5b
I/DEBUG ( 79):
I/DEBUG ( 79): code around lr:
I/DEBUG ( 79): afd198f8 447b4a0d 589cb083 90012600 686768a5
I/DEBUG ( 79): afd19908 220ce008 2b005eab 1c28d003 47889901
I/DEBUG ( 79): afd19918 35544306 d5f43f01 2c006824 b003d1ee
I/DEBUG ( 79): afd19928 bdf01c30 00028c26 ffffff88 1c0fb5f0
I/DEBUG ( 79): afd19938 b0871c3d a9044355 1c16ac01 604d9004
I/DEBUG ( 79):
I/DEBUG ( 79): stack:
I/DEBUG ( 79): bef52990 00000000
I/DEBUG ( 79): bef52994 00000000
I/DEBUG ( 79): bef52998 afd4372c
I/DEBUG ( 79): bef5299c afd436d8
I/DEBUG ( 79): bef529a0 00000000
I/DEBUG ( 79): bef529a4 afd19919 /system/lib/libc.so
I/DEBUG ( 79): bef529a8 00000000
I/DEBUG ( 79): bef529ac afd18985 /system/lib/libc.so
I/DEBUG ( 79): bef529b0 00000000
I/DEBUG ( 79): bef529b4 0005ea66
I/DEBUG ( 79): bef529b8 0000ce40
I/DEBUG ( 79): bef529bc aca9e5c0
I/DEBUG ( 79): bef529c0 00000000
I/DEBUG ( 79): bef529c4 afd189e3 /system/lib/libc.so
I/DEBUG ( 79): bef529c8 df002777
I/DEBUG ( 79): bef529cc e3a070ad
I/DEBUG ( 79): #00 bef529d0 aca85ffb /system/lib/libdvm.so
I/DEBUG ( 79): bef529d4 aca64a57 /system/lib/libdvm.so
I/DEBUG ( 79): #01 bef529d8 41d1dd8d
I/DEBUG ( 79): bef529dc 41d5b7db
I/DEBUG ( 79): bef529e0 00080f40
I/DEBUG ( 79): bef529e4 aca85ffb /system/lib/libdvm.so
I/DEBUG ( 79): bef529e8 000001b4
I/DEBUG ( 79): bef529ec 00000000
I/DEBUG ( 79): bef529f0 00000000
I/DEBUG ( 79): bef529f4 00000000
I/DEBUG ( 79): bef529f8 00000000
I/DEBUG ( 79): bef529fc aca85ffb /system/lib/libdvm.so
I/DEBUG ( 79): bef52a00 00080f40
I/DEBUG ( 79): bef52a04 00000000
I/DEBUG ( 79): bef52a08 0000ce40
I/DEBUG ( 79): bef52a0c aca64cf3 /system/lib/libdvm.so
I/ServiceManager( 76): service 'media.camera' died
I/ServiceManager( 76): service 'media.audio_policy' died
I/ServiceManager( 76): service 'media.audio_flinger' died
I/ServiceManager( 76): service 'media.player' died
I/Netd ( 147): Netd 1.0 starting
I/ ( 146): ServiceManager: 0xad50
I/HTC Acoustic( 146): libhtc_acoustic.so version 1.0.1.1.
E/HTC Acoustic( 146): Fail to open /system/etc/AudioPara_VODA-Spain.csv -1.
E/HTC Acoustic( 146): Fail to open /system/etc/AudioPara4.csv -1.
E/HTC Acoustic( 146): read audio para from file failed -1
E/AudioHardwareMSM72XX( 146): Could not set acoustic parameters to share memory
: -1
D/AudioHardwareMSM72XX( 146): mNumSndEndpoints = 13
D/AudioHardwareMSM72XX( 146): BT MATCH HANDSET
D/AudioHardwareMSM72XX( 146): BT MATCH SPEAKER
D/AudioHardwareMSM72XX( 146): BT MATCH HEADSET
D/AudioHardwareMSM72XX( 146): BT MATCH BT
D/AudioHardwareMSM72XX( 146): BT MATCH CARKIT
D/AudioHardwareMSM72XX( 146): BT MATCH TTY_FULL
D/AudioHardwareMSM72XX( 146): BT MATCH TTY_VCO
D/AudioHardwareMSM72XX( 146): BT MATCH TTY_HCO
D/AudioHardwareMSM72XX( 146): BT MATCH NO_MIC_HEADSET
D/AudioHardwareMSM72XX( 146): BT MATCH FM_HEADSET
D/AudioHardwareMSM72XX( 146): BT MATCH HEADSET_AND_SPEAKER
D/AudioHardwareMSM72XX( 146): BT MATCH FM_SPEAKER
D/AudioHardwareMSM72XX( 146): BT MATCH CURRENT
D/AudioHardwareInterface( 146): setMode(NORMAL)

[TF101] Boot Loop/stuck - no fastboot - no shell?

Hello XDA-Developers,
well for 4 Days i am trying to find a solution and now i am at the point where i cant do any more.
I just want to tell you my problem and hope that you have a clue/fix/idea for me.
What have i done?
Well 5 Days ago i startet to flash my working TF101 with cyanogenmod. After some lil problems i managed it to install cyanogenmod (cm-10-20130929-NIGHTLY-tf101) and TWRP 2.2.2 (?). One day later I noticed that there is a newer Rom -> KatKiss 5.1. and i was trying to install this image what was not working. I noticed in the installation guid that "Older versions of TWRP like 2.3.x won't work." so i decided to download the signed_twrp-2.8.1.1_tf101.zip.
I think now the funny part beginns:
In my TWRP (2.2.?) i was cleaning up the system. Full whipe + Factory reset + wiping cache/dalvik AND i was thinking "Well. Why shouldnt i be able to install the new TWRP with the old one?" So i went to install, checked the signed_twrp-2.8.1.1_tf101.zip and ran the installation. No Error everything was looking good. I did a restart
Now the Problems are starting
I realised quite quick that the Epad was doing nothing more than showing me the bootsplash.
It is this one on the left side (sorry was not finding any suitable picture ):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No text, no error message, NOTHING.
[.. and they are getting worse]
So i was trying to get in the bootloader by pressing Power + Volume down. This seams to work and the Pad is asking me "Checking for RCK.. press key <VOL_UP> in 5 Sec to enter RCK" Pressing VOL-UP next message is showing up "Booting recovery kernel image" Well.. and thats it ... nothing more happens.
Next step i was doing the same but was not pressing VOL-UP showing me two other options. Wipe Data and Android.
Chosing Wipe Date will bring me back to the first point and nothing is happening. Choosing Android is doing nothing more but it is telling me Cold-booting Linux.
Trying another combination for APX-> Power + Volume up = Works.
Looking for Help! Finding Help but no solution
Trying several things with ADB like this -> Command "ADB shell" ist not working telling me: "exec '/system/bin/sh' failed no such file or directory (2)"
, that -> Command "fastboot -i 0x0b05 flash staging twrp.img" is working telling me: "Waiting for device" Device is doing nothing.
and some other things always with the same error. By reading this Topic i found some difference. Using "adb ls /system" Was showing me:
000041ed 00001000 55925a11 .
000041c0 00004000 55925a11 lost+found
000041ed 00000000 5592f0ac ..
Than i found this Topic but had no clue how to fix the "enough permissions" problem. So i was starting using Tools:
EasyFlasher -> not knowing what my Serial is (Starting with BBOKA) I was trying both methods -> Rebooting but no text on Tablet
One Click Recovery - Error: "exec '/system/bin/sh' failed no such file or directory (2)"
NVFlasher -> Tool is no longer downloadable
In the end I was following this Topic to this Guide
Your turne
So.. i dont know how to fix my problem and i am quite sure i can make some people smile (especially about the Part "Well. Why shouldnt i be able to install the new TWRP with the old one?) but maybe you have an idea what i can do? I must admit after several hours .. i am tilt.
Thank you for reading. Hope you can help.
Regards Bava
EDIT: Sorry missed something: I am no longer able to switch it off. It will reboot and stuck at bootsplash.
Well... was mailing with the ASUS-Customer-Service. They will not tell any price, but charge a fee of 95€ for looking at it and telling what they can do. Than they will give you a price. Installing Android is 89€ new Mainboard ist about 150€...
Sooooo... while it seams that nobody can help me, i will try to get a new tablet or a cheep used one. Maybe i will try to get one with a broken display and try to install my pannel.
We will see.
Aufwiedersehn (spelling?)
I would suggest flashing back to stock and starting all over as too many things could be problem. Use easyflasher by whitekidney which I have always found to work.
Guten tag
barkeater said:
Aufwiedersehn (spelling?)
I would suggest flashing back to stock and starting all over as too many things could be problem. Use easyflasher by whitekidney which I have always found to work.
Guten tag
Click to expand...
Click to collapse
Auf Wiedersehen = Good Bye Hallo = Hello
I allready used EasyFlasher. But both methods are not working. Maybe its about my Serial starting wit BBOKA... Dont know.
Think my big problem is about the missing rights to "write".
well.. made some new experience:
I can "push" stuff on my device but not to all folders. But i dont have rights to write on /system.
E:\asdk\platform-tools>adb ls /
000041ed 00000000 5598f095 .
000041ed 00000000 5598f095 ..
00004140 00000000 5598f095 config
000041f9 00001000 559262c4 cache
000041ed 00000000 5598f095 acct
0000a1ff 0000000e 5598f095 vendor
0000a1ff 00000011 5598f095 d
0000a1ff 0000000b 5598f095 etc
0000a1ff 00000010 5598f095 sdcard
00004028 00000000 5598f095 storage
000041fd 00000000 5598f095 mnt
000081a4 0000057f 00000000 ueventd.ventana.rc
000081a4 000013d3 00000000 ueventd.rc
000081a4 00000110 00000000 ueventd.goldfish.rc
000041ed 00001000 55925a11 system
000041ed 00000000 5598f095 sys
000041e8 00000000 00000000 sbin
0000416d 00000000 0000000b proc
000081e8 00000ba6 00000000 init.ventana.usb.rc
000081e8 00001fab 00000000 init.ventana.rc
000081e8 0000003a 00000000 init.ventana.keyboard.rc
000081e8 00000f4b 00000000 init.usb.rc
000081e8 00000665 00000000 init.trace.rc
000081e8 00004612 00000000 init.rc
000081e8 00000928 00000000 init.goldfish.rc
000081e8 000004c7 00000000 init.cm.rc
000081e8 00019b40 00000000 init
000081a0 0000033d 00000000 fstab.ventana
000081a4 00000074 00000000 default.prop
000041f9 00001000 559262c4 data
000041c0 00000000 5247ded3 root
000041ed 0000071c 5598f095 dev
Click to expand...
Click to collapse
I was following this Topic till the "ADB Shell" Command.
What i need is a way to "write" on /system... than i would be (hopefully) able to install busybox and run the shell-command.
So.. how do i make a read only android system writable (withouth shell)?
Edit:
Maybe i can do it with NvFlash? the nvflash.exe is included in the easyflasher so... mabe i can use this to fix my transformer?
I managed it to get TWRP installed.
Easy-Flasher did the trick but i had to DEACTIVAT Antivirus and Firewall!
guten tag! bravo
so now you should be able to flash

Unfortunately, Camera has stopped CM12s

CameraNext crashes on most ROMs I install. I am currently on a stock rom and still crashing. Normally I would just use another camera app but if it's fixable - awesome. Google Camera works fine.
I have attached 2 crash reports. I cannot generate the second one again, which it a bit odd.
Is there a fix? TIA
Kind regards
Benjamin
Android:
12.0 YNG1TAS17L
5.0.2
Camera
CameraNext
2.0.004
Crash 1
java.lang.RuntimeException: Media server died.
at com.android.camera.Y.onError(SourceFile:33)
at android.hardware.Camera$EventHandler.handleMessage(Camera.java:1195)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:135)
at android.os.HandlerThread.run(HandlerThread.java:61)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Crash 2
Build fingerprint: 'oneplus/bacon/A0001:5.0.2/LRX22G/YNG1TAS17L:user/release-keys'
Revision: '0'
ABI: 'arm'
pid: 10164, tid: 10181, name: Binder_2 >>> com.cyngn.cameranext <<<
signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x0
r0 00000000 r1 ad32209c r2 00000025 r3 00000000
r4 a3018040 r5 b6ba5de1 r6 ad320080 r7 00002000
r8 adde7b54 r9 00000000 sl 00002000 fp adde7bf0
ip b6bb5ec0 sp adde7b38 lr b6ba5ea5 pc b6e261f8 cpsr a0000030
backtrace:
#00 pc 000981f8 /system/lib/libandroid_runtime.so (JNICameraContext::copyAndPost(_JNIEnv*, android::sp<android::IMemory> const&, int)+35)
#01 pc 00098353 /system/lib/libandroid_runtime.so (JNICameraContext:ostData(int, android::sp<android::IMemory> const&, camera_frame_metadata*)+102)
#02 pc 0001e995 /system/lib/libcamera_client.so (android::Camera::dataCallback(int, android::sp<android::IMemory> const&, camera_frame_metadata*)+54)
#03 pc 00022321 /system/lib/libcamera_client.so (android::BnCameraClient:nTransact(unsigned int, android:arcel const&, android:arcel*, unsigned int)+220)
#04 pc 00017fc5 /system/lib/libbinder.so (android::BBinder::transact(unsigned int, android:arcel const&, android:arcel*, unsigned int)+60)
#05 pc 0001cf7b /system/lib/libbinder.so (android::IPCThreadState::executeCommand(int)+582)
#06 pc 0001d09f /system/lib/libbinder.so (android::IPCThreadState::getAndExecuteCommand()+38)
#07 pc 0001d0e1 /system/lib/libbinder.so (android::IPCThreadState::joinThreadPool(bool)+48)
#08 pc 0002124b /system/lib/libbinder.so
#09 pc 0000ef11 /system/lib/libutils.so (android::Thread::_threadLoop(void*)+112)
#10 pc 0005a62d /system/lib/libandroid_runtime.so (android::AndroidRuntime::javaThreadShell(void*)+72)
#11 pc 0000ea81 /system/lib/libutils.so
#12 pc 00013a1b /system/lib/libc.so (__pthread_start(void*)+30)
#13 pc 00011a0f /system/lib/libc.so (__start_thread+6)
* Cleared Data and Cache, no bacon.
I hit this bug constantly. For me, the camera is effectively unusable. I've also tried clearing cache &c.
My cameras have stopped too & I don't know how to remove or try better camera software pkg. If someone could help me to do this it would be great. Thankyou Currently running 1+1,
Resurrection Remix, 5.5.6 with slim0 gapps,+ latest cm12.1 nightly Don't have ear speaker on phone calls working either but I need my cameras back first.
wel for best results flash the K1 Color Os package in recovery.
amazing.
also you could install the A Better Camera app, its equally good if you know how to play with the light.
lastly, the Moto V3 camera port is superb..
u need to try all three to know which works best for u.
regards
---------- Post added at 01:38 PM ---------- Previous post was at 12:43 PM ----------
here are the links for the cams I use which are tested working on OP1 and LG G2 and Nexus 5.
superb apps..
COS Cam Port - http://d-h.st/gskk
here is the original thread of the port - http://forum.xda-developers.com/oneplus-one/themes-apps/coloros-camera-port-t3034148
Moto Cam port - http://d-h.st/SF8S
(remove - http://d-h.st/Prw9)
here is the original thread of the port - http://forum.xda-developers.com/android/apps-games/flashable-port-moto-camera-fullfilled-t3172783
all credits to the original devs, i am just sharing....
regards

Categories

Resources