Related
I was atempting to upgrade ROM in to the "L26 WM6 PRO Business V7 Videocall 2" ver and everything went well, but there were problem with phone calls, quality of sound during conversation exaclly, so that i was trying to update radio to 1.17 ver, and something goes wrong right now my exec don't want to turn on and he hang on the 1 splashscreen with radio ver and ver of soft,
i tryied to fixe it by downgrade rdio to 0.00 and update rom again in to the 1.15 ver included in L26 rom, but nothing has happend still the same problem
who could possibly know what had happedn with my exec, one guy on polish side said that ther is some kind of " mamaich method" to fix or check damages which I had made
Could anyone help me, I'm looking for any solution for this matter ??
Are you still able to get into bootloader?
If so, flash back your full original ROM (M$ + Radio + Ext).
hi
yes i'm still able to do it, but would u mind to give me direct link to the rom which should be installed,( one seriouse mistake it's enough for me)
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
How about flash ur stock ROM back, then revert the stock SPL. There may be semething wrong with ur device
GERMAN ROM
http://forum.xda-developers.com/showthread.php?t=426400
German ROM work fine
Guess what .... after flashing back to a german ROM (thks for the link to an htc oiginal ) the "customization" with Opera9_DE went well and finish up normally.
i am going to work/play a bit with the German version to make sure it does not come from the device
any other idea in how/why my German o2 xda does not love all the great simple ROM cooked here ??
is any o2 Germany user here havig successfully flashed their xda with an English (or French ) ROM ??
Thanks guys for the great work you do here !
Steph.
I am seeing this exact same issue.
I have had no end of grief flashing my Raph, I maintain an XP VM (I am on OS X) entirely for flashing. I have flashed many different devices with dozens of ROMs and never had a problem until I got the Raphael. I have seen BSOD's and numerous connection issues while flashing using both Raphael_CustomRUU_v1.2 and RaphaelWrapper.
Also, every ROM I have flashed (on a XP SP3 box I put together from old pieces just to flash this bastard) has hung whilst installing opera.
I am using the o2 uk variant (as yet unreleased XDA Serra).
It is a RAPH120, is this unique to o2 devices?
Would appriciate any help getting this sorted, it could become a more widespread problem with the o2 uk variant is released, as there may be an influx people wondering why their device wont flash properly.
nb. I have an unreleased o2 built ROM (RUU_Raphael_O2_UK_1.60.206.1_radio_sign_52.29.25.12_1.01.25.16_Test.exe) that flashes and installs fine even from inside my VM.
Thanks in advance for any help anyone could provide!
[UPDATE] I tried installing Opera build 1957 from a cab and it worked fine.
maybe a dumb suggestion... but try to get your device unlocked and see what happen
I checked with Oli about whether unlocking would help:
Olipro said:
I see, then that's a weird issue, however, not related or fixable by the unlocker.
your best bet is to do a soft reset as soon as the customization dialog appears and see what happens.
I was initially suspecting it could be region protection, but in those cases, the ROM doesn't boot at all, so your case is a strange one.
Click to expand...
Click to collapse
So no leads there, as an interim solution I will repack ROMeOS² v1.03 without Opera and see how that works out.
i have the same device and the same problem. I will try to repack it with the german version of opera..
Oh dear, so it would appear that current roms do not work on O2 variant devices...
Has anyone successfully flashed an O2 device (with a cooked rom)?
I have hit some problems repacking ROMeOS² as hung has included measures to stop people making their own roms based on his. I pm'd him last night asking if he could help us out, but as of yet I have not recieved a reply.
I will probably start making my own rom from scratch tonight, but its a fair bit of work just to take opera out of the customization sequence. Hopefully its just some odd bug in the opera install, rather than something more serious. I guess worst case scenario is that after opera is removed it just crashes at another point during the costomization process.
[UPDATE]
hang.tuah said:
@dabs
I'll try to make it [ROMeOS² without Opera] for v1.04 mate, thanks for ur support..
Click to expand...
Click to collapse
Excellent, so at least we have a workaround in the pipeline. Still, it would be best to find the cause of the problem, as not all cooks have the time and dedication to make special versions of their roms for a small sub-set of users.
Actually Opera is included but with no device specific & v1.04 is done
smaier said:
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
Click to expand...
Click to collapse
Hi Stephane and others having similar trouble,
I had the same situation but my original ROM was Japanese, after trying a lot of possible official WWE versions for flashing and cooked ROMs, only one version worked.. Check the official WWE version Singtel.. it worked up to customization without problem.. the only difference the default internet page is Singtel but it is not a problem cause I can still go to the other sites..
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?
Hi.
I have a Pola100 and I have tried both the VaniljEclair and the Incubus Froyo builds, with the latest DZO kernel.
The problem is that I cannot make calls, the phone registers the incoming or outgoing call, but there is no sound. Also I have not gotten the camera to work on either of the builds. I've searched around the forum but have not found a solution.
Is this fixable? I can live without the camera, but making calls is kind of usefull
Otherwise Android looks great on my phone, no problem with Wifi, market and it is rather fast.
Thanks in advance.
You don't explain if you are using haret or nand install, which is clearly your version of kernel and rom and if you have put any update. Please add some further information
Sorry, still quite new at this.
I'm using NAND install, did a "task 29" previous to my last flash. Right now I'm using the DZO from 01-07-10 and the Incubus FROYO RLS4.
Tried with the VaniljEclair RLS7b on the same DZO, but with the same result. I have not applied any updates to my current install.
Lacking ability to call and camera with both setups.
Hope this helps
Ok, which is your radio version?
If I have understood correctly the radio version is displayed in the bootloader menu.
I used a Harspl guide I found here on the forum and now it reads
SPL-2.20.OliNex
CPLD-2
Sorry for being a noob
I've got the same problem on a pola 100.
I'm running on nand (just removed WinMo yesterday evening, now I regret ...).
I use incubus26jc rls5 froyo.
I tried the two latest eclair.nbh (modified with the nebh editor to make it to panel 1).
Also, I tried radio version 1.58.21.23 , 1.58.26.20 , 1.64.08.21 .
Just like jolok I have spl-2.20.Olinex and CPLD-2.
My issue is that the sound work befor the 1rst call after rebooting my phone, and a few second after the 1rst call is made (in or out call), se sound stop (or even crash and loops), and then, no more sound on the phone after ending the call.
Also, the camera has a messed up screen, no idea why.
How do you other guys make it work correctly everytime ???
Try to update to the latest froyo version, many issue were fixed
Like I said, I already have incubus26jc rls5 froyo, the latest one ... or is there elsewere an other source for me ?
Just tested, same with incubus26jc eclair ... seams it comes from the radio or the nbh. What should I use ?
Ok, I tried the whole process over again, to see if that would help, but no.
First I did a "task_29", to clear the nand, then I flashed the 02-07-10 DZO .nbh (I edited it to panel 1 with the nbh tool).
Then I flashed the radio rom, I started with Polaris Radio 1.58.21.23 (and worked my way trough all of them)
Finally I installed the Incubus/DZO Froyo 2.2 RLS5.
I have tried alle the radio roms found in the Polaris radio thread;
Polaris Radio 1.58.21.23
Polaris Radio 1.58.25.14
Polaris Radio 1.58.26.20
Polaris Radio 1.64.06.04
Polaris Radio 1.64.08.21
I cannot get the camera to work, it only displays a purple/green/black striped screen and I cannot make calls. The phone registers calls going out and coming in, but there is no sound.
Can anyone help, or explain what I'm doing wrong?
I very new to this and I don't understand how the rest of you get your setups to work
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
It works well on incubus26jc froyo rls5 !
I can now again use calls, camera, install apps !
I don't know why only this radio is working on my phone ...
I remember it was the radio I had for a while, it was flashed when I hard-spled my polaris, and I flashed it for 1.64.08.21 when installing froyo, but seams it was a mistake.
Hope it will help you !
Does anybody now why I can only use this radio version ? Does it have a link with the spl version ? (2.20 olinex)
This is great! Tank you very much ReMix3D
The radio fle worked lke a cham for me as well, I can now make calls and even the camera is working.
Calls and camera working in VaniljEclair RL7c
The camera also works in Froyo RLS6, id not test calls, sticking with the Eclair build, seems to gor faster and smoother on my phone.
Thank you so much for the help
I had exacly the same problem. This radio version fixed it.
Thanks a lot!
That is the same Radio version (Polaris_Radio_ROM_1.59.46.12.rar) that pcarvalho recommends in his WinMo 6.5 rom page.
As I was using his rom and thus that radio prior to Android, I guess I just got lucky that this worked so well with Android.
ReMix3D said:
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
Click to expand...
Click to collapse
dude, let me kiss you! this radio fixed my pola100!
I thought my phone was cursed!)
great thanks!))
I'm happy that it helped you all !
Are there any other android on polaris users that have this issue with the radio ?
Maybe it's only for us, users of a POLA100.
I don't pretend to understand everything about it, but should not a newer radio make the calls/camera/data/gps/wifi more efficient ?
Are the chips so different between POLA100 and others ?
try this radio: 1.65.38.14
qleelulu said:
try this radio: 1.65.38.14
Click to expand...
Click to collapse
I sugget:
1. install radio 1.59.46.12
2. hard reset
3. install radio 1.65.38.14
4. hard reset
Everything works fine. Last update greatly improves battery life.
I'm using 1.65.38.14 + Incubus26Jc's Super FroYo RLS10 + haret now.
BUT phone call still dosent work sometimes. Sometimes cant make outgoing call, and cant hung up, and no response when incoming call comes. Have to reset.
Camera works fine.
Before 1.65.38.14 I used to use 1.59.46.12, works fine on wm65, but still the same problem on Android.
Maybe I'm just unlucky.
hi there,
i am curious to learn from you..
i installed the android with haret and NAND. both types of installation. i tried with all released of android Eclair, Froyo etc..
in both types of installation, the android works very slow and freezing sometimes.
the installation was OK (after reading everything about installation on nand and haret) but still freezing sometimes and working very slow.
could someone tell me if i do something wrong? or we can not use android in our pola 100 as default OS? i really want to use android on my phone..but if work like this..NO THANK YOU.
somebody can give me an answer? or on your phones android work perfectly?
please excuse my english
waiting your answers.
Which radio did you have on the phone?
Are you sure that you have install on nand partition?
Which release did you exactly test?
radio is 1.6 i think and i installed VaniljEclair_RLS11 and i'm sure that i installed in NAND..i tried in bouth ways. yours nevers freezing..or working perfectly?
installed with Atools NBH editor and changed the TGZ in atools
Try one of the latest froyo.
Radio has 3 set of numbers... and all are very important!!
thank you for your answer l1q1d .. i instaled again on SD (haret method) and i installed a new radio version 1.65 and look like working faster..i keeped the eclair because with froyo is slower.
another question, why when i put a ringtone (choosed by me) and somebody calls me appears on the display only after 4 calls on person (i mean he need to stay with phone on his ear and hear 4 ringings to can see myself on the display) if i deactivate the vibration and let a ringtone from android is same thing.... and why on wind mob i have 50% batery and on android i have 100%?
these are my questions.
the radio version is 1.65.38.14
battery need some tuning, charge and recharge...
what do you mean with charge and recharge?..i can not understand..
i really want to use the android OS ..
could you please tell me about calling and answering problems? need some tunning too?
install radio 1.58.21.23. Kernel battery need some charge-discharge cycle to get correct results (without powering off)
l1q1d what can you tell me about answering problem..do you think i can solve the problem with radio 1.58.21.23 ?
i didn't suggest you to try it!!!!
And also use a Froyo distrib
hi l1q1d, i use froyo RLS 16, but i can not use wifi with this version and is same us eclair at calling.
when somebody calls me..i need 4 calls to can see on my screen who calls me.
please tell me if you have this problem..and how to can solve this problem.
please give me an answer.
Did you update the radio and still you have the problem?
Which kernel did you use?
Where you download rls16?
i updated the radio like you told me,
i use karet 2.6.36
and froyo RLS16 from here http://forum.xda-developers.com/showthread.php?t=712310
please tell me what to do to loos that problem with calls...
when i call..everyhing seems to be OK, but when sombeody calls me..i can not see nothing until he rings 4-5 times.
where is the problem
and where can i found a froyo rls16 with working wifi?
i modified the wifi.ko in the archive with one from rls 13 but still nothing.
please help me to solve the problems.
waiting for your answers...
the Haret is 2.6.32 ..sorry for the mistake..not karet 2.6.36
Flash latest kernel and use another distro from kaiser thread
hmmm...l1q1d..please make me understand...
you want to use latest haret that is 2.6.32 and whant to take froyo release from kaiser?
please make me understand...
will solve my problems with answering?
Follow the guide on atools 1.0.4 (download it from my sig) go to help and follow all steps.
The "system" releases are device indipendent so you can take it from Vogue/Polaris/Kaiser thread.
Only nbh or default.txt need to be modified (with atools)
You can use 2.6.25 or 2.6.32.
only 2.6.25 has working camera.
Also flash 1.58.xx.xx radio (look in cruise rom develop)
an with this you tell me that i will solve all problems and can use ANDROID on my poalris?
will be great
i will test it and inform you.
thanks