plzzz how to solve this problem..
i've tried to hard spl flash with deffirent rom but no chance..
how can i release Hard-SPL and phone not totally power on.. so can't detect with activesync...!!??
thinx in adv..
allways stop on 0%.. !!!??? plzzzz help..
problem solved with hard reset... thinx
If this happens again, then yes a hard reset would fix it, but if you want to flash a different ROM (if the problem repeats and you want to test a different rom to fix it), you can enter bootloader by holding Power and VolDown when the phone is switched off. You will see a multicoloured screen, and from there you can flash new ROM's
Related
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Why did you....
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
Men! jajajaja ok lets see
when an upgrade finish it restart by itself you dont need to do nothing... when the phone begins and configures by itself if you want it... its recomemded... to hard reset i mean hold the record... hold the comm buttons and then push the rest hole still holdin the two buttons... a black screen appears telling you to press the send button unhold the butons so then pres the send button...
but for now try to put your phone in bootloaders i dont remember how but read the wikiwizard page it say how to enter in bootloaders forcing... then reflas with RUU make sure that your device is unlocked CID SIM etc etc etc.
tell me how is it going, maybe you will ned more steps.
Is not destroy cause it turns on dont be afraid it works but stucks on splash screen...
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
You said in your very first post that you had a "HTC Mogul", if so, you have a Titan? "Sprint Mogul" go here and see for sure what phone you have.
http://forum.xda-developers.com/forumdisplay.php?f=381
You better make sure before you try and do anything.
i had a mogul first, i sold it and took a wizard
That is good news... Did you fix your Wizard?
When I had mine and I flashed one of TNT's ROMs, it error ed and gave me introductions to follow but I just put it into boot loader mode and re flashed to a different ROM
Hello,
I am fairly new to loading roms, but I have done it already several times successfully both on keiser and wizard,
now Yesterday I wanted to try Dutty's V1 rom and I did, now when it completed it started to boot, with the htc splash screen customized with Dutty's name etc, then it asked me to calibrate the pen, you know the normal stuff.....then it stopped booting it will get stuck into a white screen,
and it stays there, it will not active sync, it starts fine, I read: R 1.65.16.24
g 25.83.40.02W D 3.5Dutty's . then it gets into this white screen and stays till the backlite goes off, if I tap the screen the backlite goes back on, and one time I was able to hold the off button and I got even a message saying " if you disconnect them you might lose some data, continue yes or no". Tapping no or yes made no difference.
Please Help, I need to enter bootloader in some way, please help !
can you enter bootloader mode?
keep the camera button pressed and soft reset with ur stylus....or turn off ur phone and keep the camera button pressed and press the power button of ur device...
if you can enter bootloader mode...just reflash dutty's rom or maybe flash some other rom and you should be fine
Once it started to calibrate the stylus is when you Hard reset.
Please Help, I need to enter bootloader in some way, please help !
Click to expand...
Click to collapse
You definately need more lecture.
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
My SP5m switch off itself and it not swithch on again. while pusing power button ren blinks that it. I tryied with fulllu charged battary but same result. can any on plse help me to solve this??
Hardware
Hi
Unfortunately, it sounds like a hardware problem. Does the LED flash green/yellow or red. If it flashes RED it probably means that your main board is not working properly.
One way you may be able to rescue the device is to attempt to start it in bootloader mode and flash a ROM, preferably an official operator's rom.
Cheers
andrew-in-woking
Hello
I had HTC Diamond before and now i bought HTC Touch Pro.
It has original O2 rom and I am trying to flash a new one. But I cannot enter bootloader. I did Hard-SPL but since i cannot enter bootloader I cannot check if it was succesful or not. I tried all the button combinations (like vol down + enter + reset etc...) but it was unsuccesfull. And i even tried to copy EnterBootloader.exe to the phone and run it. But the screen just goes black and thats all. And when I was trying to do HARD-SPL the screen also went only black. I never seen the three color screen. Please help me!
Thanks
Moved as not ROM Development.
Well, you're probably doing it wrong. Hold volume down, then soft reset. Keep holding vol down until the tricolor screen appears. Don't hold the reset button down; just push it and release it.
Im doing it right. Im sure
so u re trying to flash via card or not, if you're trying to flash via PC dont forget to connect with active sync before, if you are trying to connect with SD card dont forget to do a clean format of it before
I remembered that I actually had the issue once (no idea why, it only happened on one rom about a year ago). Try doing a hard reset, then go into bootloader (instead of pushing vol up and re-booting). If that doesn't work, then start the boot process, and when it hits the alignment screen, try to go into bootloader.