Related
Hello my friends i have a little, hopefully simple question and i dont know how to answer it^^
Why i cant flash the mobile phone LG KP500, called 'Cookie' to Windows Mobile 6.x?
Is there no way to flash a different rom to this device?
i dont know much about the processor architecture of the "Cookie" but in my opinion it's a touchscreen-enabled phone like for excample the Samsung Omnia i900..
might anybody feels able to explain me whats the different between this two devices "Cookie" and for excample the "Omnia" and why it's not able to flash it.
thanks in advance
redplate
i guess because the roms are device specific. You cant just flash a rom for a diamond on a kaiser either. Maybe with some luck you can flash android in the future when lg throws some android phones on the market.
you should have invested a bit more money and get yourself the ks20 from lg. This has winmo 6.x installed (and wlan and gps)...
You can't actually flash it as LG in most of its new devices uses the "S-Class" (as its called), interface-software,limitating the customer to do anything with it.
Can u type using ur keypad, the following
1809*#500#
and tell me on ur SW and HW version menu, what's its actually SW and HW version?
You can flash a Windows Mobile device with a Windows Mobile ROM or Android.
You cannot flash a Windows Mobile ROM to just any LG or other phones which run on their own OS. Like iphone OS ROM cannot be flashed to WinMo devices.
hey thanks for all ur replys.. very interessting btw i've found something about iphone running windows mobile ^^
http://www.youtube.com/watch?v=On9nPh5aE-M
so maybe someday someone wants to port win mobile to cookie^^
B3ler3fonte said:
You can't actually flash it as LG in most of its new devices uses the "S-Class" (as its called), interface-software,limitating the customer to do anything with it.
Can u type using ur keypad, the following
1809*#500#
and tell me on ur SW and HW version menu, what's its actually SW and HW version?
Click to expand...
Click to collapse
and i cant use that because the phone is not arrived yet hehe
but i will try it if i can..
hi again,
at first thanks again for ur help.. maybe a other phone would be better hehe but the cookie is a nice phone
@B3ler3fonte
thanks for ur help. btw you have mixed up * and # just for info
the right command is 1809#*500#
after typing in the command i choosed the entry "version" from a submenu.
i've got the following info:
ikp500xx-00-v10e-xxx-xxx-jun-22-2009
so might its usefull for u mate... v10e is softwareversion?
cheers
red
redplate said:
@B3ler3fonte
thanks for ur help. btw you have mixed up * and # just for info
the right command is 1809#*500#
after typing in the command i choosed the entry "version" from a submenu.
i've got the following info:
ikp500xx-00-v10e-xxx-xxx-jun-22-2009
so might its usefull for u mate... v10e is softwareversion?
cheers
red
Click to expand...
Click to collapse
Sorry for my late reply mate. Yeah, i mixed it up a bit with * # signs But as far as i saw, u found ur way . Notice that this code is only for internal purposes testing and so on, so consider that u have full acess to ur phone now and u can even hard/soft reset ur device, through the appropriate menu.
Anyway, yeah 10e is the SW version, but still, i think there are another two SW updates available already online, so i sugeest u, to install LG Pc Suite that was included in the box and seach for those and flash ur device accordingly
hi again,
at first np mate.. it's ok .. i know that hehe. i have to say "sry for my late reply"^^
and full access sounds always good^^ btw thank you very much for the code!
to the phone: im using the newest version 10z now. could you tell me plz for what exactly do you need the SW and HW version?
maybe there's another possibility to get windows mobile flashed on a LG Cookie?
thanks and greetz
red
Any news about flashing WM onto the cookie? I would like to change the operating system of my wife's mobile phone if possible.
I have some question?
1. Can HTC Whitestone run Andorid?
2. If it can run Android, why xda don't development XDA-Andorid for HTC Whitestone?
3. If it can run Andorid and XDA-Andorid available for HTC, how to install XDA-Andorid on HTC Whitestone? Step by step to install for somebody have some stupid questions as me! We'd like Andorid for my phone!
Thanks for your work! Thanks for XDA!
NOTE: Some body don't install from Whitestone Android It Booted!!! http://forum.ppcgeeks.com/showthread.php?t=104666
I tryied this but my phone hangup when run error: 1. 648895] console handover: boot [htc_fb0]-> real [tty] on screen, please tell me what does this mean and how to fix this error!?
Hi! Admin! Please move this topic to HTC Whitestone Thread! Thankssss!
drnothing said:
I have some question?
1. Can HTC Whitestone run Andorid?
2. If it can run Android, why xda don't development XDA-Andorid for HTC Whitestone?
3. If it can run Andorid and XDA-Andorid available for HTC, how to install XDA-Andorid on HTC Whitestone? Step by step to install for somebody have some stupid questions as me! We'd like Andorid for my phone!
Thanks for your work! Thanks for XDA!
Click to expand...
Click to collapse
All you gotta do is search and read!!! LOL
http://forum.ppcgeeks.com/showthread.php?t=104666
Mally2,
In the original post, there was already a reference to that PPCGeeks page. I have the same error and I'm looking for help as well. Any takers?
Thanks!
Is not a build for the Imagio
TechXII said:
Mally2,
In the original post, there was already a reference to that PPCGeeks page. I have the same error and I'm looking for help as well. Any takers?
Thanks!
Click to expand...
Click to collapse
Android is not a special "thing" you just put anywhere and run, it has a kernel and is composed out of drivers and configurations, i'm pretty shure everething is out there but needs to be packed out together...
I'm a software developer but i have no experience compiling Android, my research is driving me to the HTC Lexikon (Merge) recently launched, this PDA hardware is very similar to the Imagio and it stock's Android so the work will be almost done and we won't need to start from "0", if you can help about please contact me..
Try this one
TechXII said:
Mally2,
In the original post, there was already a reference to that PPCGeeks page. I have the same error and I'm looking for help as well. Any takers?
Thanks!
Click to expand...
Click to collapse
Try this one, this PDA holds almost the same hardware as the imagio, it deffinitely should work:
http://911sniper.blog.163.com/blog/static/14290088120108195384257/
Post your results !!!
Has AnyOne tried his solution?
the lexikon is almost alike to the imagio
and if it doesnt work you can flash back.
So its a win win
i dont use whitestone.
It booted (i guess) !!
ndnmaster096 said:
Has AnyOne tried his solution?
the lexikon is almost alike to the imagio
and if it doesnt work you can flash back.
So its a win win
Click to expand...
Click to collapse
Hi, i am currently developing Android for the Imagio, i just startted the process and some tests, yesterday i was able to boot using a Topaz old testing kernel, but the screen was blank. I plan to compile a custom kernel for the Imagio.
I posted the Lexikon image but it wont work for the imagio because of the processor are different (Imagio= MSM7600) but i guess i could use some drivers from the Lexikon...
Wish me luck, i'm reading a lot to understand the kernel and Android
You can download the image i used here:
http://www.4shared.com/file/h9LTDTdp/droid_booted_imagiotar.html
And maybe, if you find the correct cmd_line arguments for HaRET you can get the screen to work properly
Glad someone is working on this. I'm right there with you! Make a thread on the imagio forum or pm me if you need testing.
Hi all!
I am a new man to develop ROM. Now I had been assigned a job to create a Windows Mobile ROM. But I know nothing about it. I have many questions:
1. What work cycle I should follow for this job?
2. I had ever compiled Windows CE 6.0. And I had NK.bin after compilation. Can I use this as a kernel in Windows Mobile?
3. What tools I should use to build ROM?
4. Suppose I had already create a ROM, hwo to depoly it into Mobile Phone?
I hope some expert with experience about this can help me, and told me how to do. Thank you very much!
First, we need to know which device the ROM is for. Each Windows Mobile ROM is device specific.
Then you need to decide which version of WM you want to include.
Also, there are several tools (called "kitchens" for cooking the ROM) available on these forums. OSKitchen and Ervius Visual Kitchen are the two that most people use.
And you need to have some kind of understanding of the ROM structure of a Windows Mobile ROM and which files are responsible for which part of the OS.
Thanks for your reply!
I had downloaded these two applications. Now I can use erviusKitchen to dump a ROM downloaded from HTC offical web-site. But I don't know how to change the DEVICE, Language and so on. All those are read only.
I hope the_scotsman can help me more.
Thx again!
Why no answer?
Perhaps because you are not in the right section?
Try here
Hi all,
i have a camera problem after installing Android on my Polaris 100.When i turn on my camera it gives me just a green screen and after a while the OS gives me the message that the process camera.android.com crashed unexpectedly.
I follow the installation to nand steps, that are posted in this forum by l1q1d ,i use the latest kernel 2.6.32 and the latest froyo release "Incubus26Jc_'s_Super_FroYo_RLS16",i create the nbh file using the latest 1.04 atools,and install the android using install.sh script.I tried different radio rom versions,i tried my original radio rom 1.58.XX.XX ,also 1.59.46.12 and 1.65.38.14 and 1.64.XX.XX ,i tried also My Warm Donut Android release but the camera won't work.On my WM6 and on WM6.5 cooked rom the camera works perfectly ,so my conclusion is that this is not a hardware problem.What should i do,any ideas.
I like very much the Droid OS and i want to use it but this problem is very annoying,i search the forum for users with similar problem and i found some threads but they were useless cause the posts does not contain any particular resolutions for this problem.
I will appreciate any help that i can get.
10x in advance everybody
godjak
Well,
i finished with my Android experiments now i'll post the results.First i have to say that i didn't succeed to have a working camera on my Android NAND installation .Like l1q1d advace me for all my installations i used kernel 2.6.25,i use 3 version of radio ROM 1.58 (21.23/25.14/26.20) i installed androidupdate from l1q1d sourceforge site,and i use nbh file from his "Kaiser thread".
Now the results by Android Releases:
1.Latest Froyo Release:
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
2.Latest Froyo Unodex-en (from sourceforge)
Installation succeeded.
1.58.21.23-Camera gives green screen
1.58.25.14-Camera flickering in all kind of colors and shuts down after a while.
1.58.26.20-Camera flickering in all kind of colors and shuts down after a while.
3.Latest Gingerbread (26.12 from sourceforge)
Installation failed!
System message:No space left on device cannot extract data.
4.Barebones deodex
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
5.Barebones odex
Installation failed!
System message during installation:Install module failed.Could not install for this kernel.
Well that's all folks,if someone has any ideas how to have a working camera on NAND let share his experience with us
The 2.6.32 kernel hasn't camera support for polaris now
l1q1d said:
The 2.6.32 kernel hasn't camera support for polaris now
Click to expand...
Click to collapse
Sorry to mention that but i tried also with kernel 2.6.25 with same result,which kernel exactly has a camera support?And could you be more accurate which radio version the Incubus RLS16 is working WITH camera support,is there any chance to have a working android installation with all my communications and features working,i didn't ask much,just want to use my phone for calls,wifi,BT ,GPS and camera thats all.
Regards
godjak
i suggest latest 2.6.25 kernel for camera, choose one release from kaiser thread and remember to install the modules from the modules/androidupdate.tgz in sourceforge.
you asked a fully working system (not too much....)
l1q1d said:
i suggest latest 2.6.25 kernel for camera, choose one release from kaiser thread and remember to install the modules from the modules/androidupdate.tgz in sourceforge.
you asked a fully working system (not too much....)
Click to expand...
Click to collapse
What did you mean by "Kaiser thread" can you post me a link to this thread?
Do you mean androidupdate.tgz on the atools sourceforge page???
The camera is a very basic feature of every modern phone i don't think i ask for too much,or what can i do with phone that i can't make phone calls.I'm ok with the bugs on your currently developing OS but this is something that i need to have,just to enjoy my PDA and the Droid OS,sorry
Camera isn't a very basic feature for a phone without native android so, there is work to do, if you want to help you are welcome
The update is the one from sourceforge (or look in kaiser thread for the link)
l1q1d said:
Camera isn't a very basic feature for a phone without native android so, there is work to do, if you want to help you are welcome
The update is the one from sourceforge (or look in kaiser thread for the link)
Click to expand...
Click to collapse
Obviously you won't tell me what is this "kaiser thread" ,do you mean that i have to use kaiser nbh file ,or i'm just guessing your posted hints,if you don't want to help just don't post any more replies i get your insinuating remark.I see that you are the smartest guy in this forum because from the threads i read i'm not the only one getting clever answers and no specific solutions from you for the problems,but this is your right of course.
10x again
godjak
godjak said:
Obviously you won't tell me what is this "kaiser thread" ,do you mean that i have to use kaiser nbh file ,or i'm just guessing your posted hints,if you don't want to help just don't post any more replies i get your insinuating remark.I see that you are the smartest guy in this forum because from the threads i read i'm not the only one getting clever answers and no specific solutions from you for the problems,but this is your right of course.
10x again
godjak
Click to expand...
Click to collapse
OK i got it,it takes time for the "stupid windows users",my last question is what radio rom version should i use ,or i have to try all of them to get it working
10x
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
l1q1d said:
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
Click to expand...
Click to collapse
10q i'll try it and i'll post the results from my experiments next week
See ya
godjak
Hi l1q1d,
My camera works very fine with your latest kernel. I use :
- kernel with Haret (zimage 11-29-10) and all with atools
- last build froyo of Thoughtlesskyle
Cheers
l1q1d said:
try with one of the 1.58.xx.xx from here
http://forum.xda-developers.com/showthread.php?t=379599
Click to expand...
Click to collapse
whato do you mean as latest? 2.6.25 or 2.6.32?
manu33xtro said:
Hi l1q1d,
My camera works very fine with your latest kernel. I use :
- kernel with Haret (zimage 11-29-10) and all with atools
- last build froyo of Thoughtlesskyle
Cheers
Click to expand...
Click to collapse
You are using an SD installation of the Droid or what?I want to substitute my WiMo with Droid (nand installation) not using it simultaneously
camera
Greetings!
At me camera Polaris100, android 2.2 has earned!
The system is established on SDcard. Details later.
Excuse for my English
Wow that was some bad english lol. Sounds like your excited about android on your polaris though which is good!
camera works
google translator has done his dirty work! But I will continue to use it. (Better than the very bad way.)
I wanted to say that after extensive experiments android all still earned 2.2 on my touch cruise (polaris 100) including camera and wi-fi.
Everything works! but not yet stable.
I shall list what is not working:
-The camera takes pictures only when switching to video mode error.
-The front camera is not working.
-FM radio does not work.
else works 100%!
Thanks to everyone who has been developing an android 2.2 for polaris 100!
colombo_nik said:
google translator has done his dirty work! But I will continue to use it. (Better than the very bad way.)
I wanted to say that after extensive experiments android all still earned 2.2 on my touch cruise (polaris 100) including camera and wi-fi.
Everything works! but not yet stable.
I shall list what is not working:
-The camera takes pictures only when switching to video mode error.
-The front camera is not working.
-FM radio does not work.
else works 100%!
Thanks to everyone who has been developing an android 2.2 for polaris 100!
Click to expand...
Click to collapse
Those are the problems that are common to any polaris kernel and build in existance right now.
HI, i still can´t make my camera work, i have a polaris 100, please hepl a nooby
use 2.6.25 kernel in order to make camera working.
I use 2.6.32 and camera works fine. With radio 1.64.08.21 calls and camera didn't work, and i dwonload radio 1.59.46.12 and all works fine.
Guys, I have good news, got it working but in this time I must to fix something to get screen. Beocouse it is oficial rom, I am allways for the official rom instead of cm, and I think it will be good and think it will be our start for good Gingerbread!
Thanks that's realley a good new, great job guys. I can programm but i don't know were to start, it will be grate if someone can told me, i know c, java (medium), VB 6, thanks guys
it really a good news.but,I have some questiones about the fix you released today.how to use it?recover with the new fix?Or other methods?thanks.
fernando2610 said:
Thanks that's realley a good new, great job guys. I can programm but i don't know were to start, it will be grate if someone can told me, i know c, java (medium), VB 6, thanks guys
Click to expand...
Click to collapse
help is always welcome.
froyo source code is on photon page: http://code.google.com/p/photon-android/source/checkout
for gingerbeard source code, contact munjeni.
you need to checkout code on your computer.
you need to setup a compilation environment for linux kernel compilation (ubuntu 10 for ex)
use adb to get debug messages ("adb shell dmesg" for kernel log messages, "adb logcat -d" for android log messages)
tell us if you need help
Thanks a lot I'll do some test. If I need help let you know.
Enviado desde mi HTC Photon usando XDA Premium App
I not know how to get it working only I got is boot splash screen and crash after (looping on this!)!! I've deodexed susessfully all .jar but moybe I need to deodex .apks ?? Here is logcat maybe one from you find what is problem?
It seems that the android system server is not running properly
Have a look here
Yes I know that but could not get it working
Guys, I got something but is not clean boot, need help here, please see logcat!
All jars is loaded and all apps is initialised but error is with two (jars) odexes:
Code:
I/dalvikvm( 198): DexOpt: mismatch dep name: '/data/dalvik-cache/[email protected]@[email protected]' vs. '/system/framework/com.htc.commonctrl.odex'
What is problem?
google is always your friend
http://www.google.com/search?sclien...&aqi=&bav=on.2,or.r_gc.r_pw.&biw=1280&bih=709
I tried searching google but only see pastebin and not how to solve it! I asked for help becouse I working now with cm7, and if someone is interested to find way for my phoblem I will continue with sense rom from Wildfire S, I tried and I am close to get first screen but hmmm 2 jars (htc) could not give me way to succesfully run
P.S. I deodexed all odex from framework, but two odex-jar cause problem!
@ munheni, hi, just to mention, actually it to ask, i am no dev and dont know how it works but isnt it easier to port the android on the HTC ARIA to the HTC HD MINI? they have identical hardwares...
They have NOT identical hardware