Database Info

S100 - Problem

Hi guys. I have such a problem - when i press reset my S100 gos to bootloader mode. After I take the battery off and then put it in i see the windows setup screen, then when programs from the ExtROM are setup and the device reboots it go to Bootloader mode again. what i have to do?

just push soft reset without power button while before extended rom begin loading......... advice from Moscow

When pressing reset device goes to bootloader mode

It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
V

Maybe you have a halfway finished ROM upload on your Magician? Try running a full ROM install, that should fix it.

vijay555 said:
It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
Click to expand...
Click to collapse
But it does go to bootloader. In any way if i press reset button (that is in the hole) it goes to bootloader.
HBK said:
Try running a full ROM install, that should fix it.
Click to expand...
Click to collapse
What do you mean full ROM?
I tried to flash it just as usual, but when it goes to bootloader mode windows cant recognize the device so the flasher tells "connection error".

Stuck at Smart Mobility Screen!

I used the rom cooking kitchen to make some of my favorite roms even better. Basically I just deleated some of the programs I dont use and deleated some of the extra sounds. Everything went through without any problems and now after I flashed it the smart mobility screen comes up and shows the radio and other info but then freezes there. How can I fix this or go back to a different rom? HELP. Thanks again

hollywood said:
I used the rom cooking kitchen to make some of my favorite roms even better. Basically I just deleated some of the programs I dont use and deleated some of the extra sounds. Everything went through without any problems and now after I flashed it the smart mobility screen comes up and shows the radio and other info but then freezes there. How can I fix this or go back to a different rom? HELP. Thanks again
Click to expand...
Click to collapse
try and get the ship rom that came with ya phone i had the same prob with a o2 xda/mda wizard i got the rom whitch was 1.05 ok now
hope this helps

How can I install it, my usb wont connect to the device?

hollywood said:
How can I install it, my usb wont connect to the device?
Click to expand...
Click to collapse
read the hard spl manual
*MICROSD FLASHING*
***IMPORTANT***
Please make sure you have HardSPL on your device.
1. Get a 128MB MicroSD card (or whatever size you like) and format it (***please make sure you format it, but not just delete all contents on it)
2. find the ROM image you would like to use, normally namede RUU_Sign.nbh, and rename it to "KAISIMG.nbh"
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
4. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
5. After all these are done, press the reset button located at the bottom of the phone to reset the device.

Thank you very much, back to normal!

Kaiser big trouble

Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks

noor_ltd said:
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
Click to expand...
Click to collapse
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.

Quentin- said:
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Click to expand...
Click to collapse
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?

noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?

noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
power+camera+reset...and its really tricky. Keep holding camera+power after you have pushed reset till it comes up. It even takes me a number of tries before I get the tri-color screen.
I never tried loading HardSPLv1 from the boot screen but it should work. I highly suggest doing that *before* you try to re-flash a ROM. Link here: http://forum.xda-developers.com/showthread.php?t=334679
Then after loading HardSPLv1 go back to the tri-color screen and load the HTC or ATT default ROM and see if that fixes your problem.
EDIT: I agree with TheOccult FYI, I assume you have a reason to not have simply swapped the device at your retailer hence my advice. If you can easily swap the device just do that instead and it'll save you a lot of grief.

TheOccult said:
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
Click to expand...
Click to collapse
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"

noor_ltd said:
so I remove the battery when windows is working.....without power off.
Click to expand...
Click to collapse
I'm just curious but why would you remove the battery when the device is powered on?
Your best bet is to take it back to the vendor as they may need to reload your device since you haven't flashed your rom you should be okay.

noor_ltd said:
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
Click to expand...
Click to collapse
You broke it. Take it back where you bought it.
Also, this is not the appropriate forum for your problem.

HTC POLA200 hard rest

Hi,
Newbie here....A pola200 came to me for password...incoming and outgoing call working..how ever there is a password..wats the best way to remove the password...Or how do i go abt hard resetting it
Thanks in advance
cliffrock

Well as i see there is no one answering me the question....
I found my own solution:
Hard Reset:
On the 02 Orbit2, make sure the phone is powered on and then press AND HOLD the Windows and OK buttons down at the same time, THEN use your stylus to press AND RELEASE the reset button (while you CONTINUE to hold down the Windows and OK buttons). You should get a grey-ish/white screen explaining how to complete the hard reset or how to cancel the operation.
If you cannot see anything on your screen due to the OS being totally messed up (in other words, as long as it's not hardware failure), then you need to put your device into bootloader mode (4-color screen) so that you can flash the ROM (either what you already are using, or a newly cooked one - either way you need to have a ROM image file on your computer to complete the flashing process).
Bootloader Mode:
To enter bootloader mode, press AND HOLD the camera button and then press AND RELEASE the soft reset with your stylus. When the screen is showing the 4 color bands, plug in the USB cable between your computer and phone flash the ROM.
Click to expand...
Click to collapse
Br
cliffrock

Thanks man, working good.

Very thanks

[Q] HTC HD2 won`t go in to bootloader mode

Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.

take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.

I also tried to do that and nothing happens! It just show`s white screen with htc logo.

My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile

rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.

Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??

no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....

Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

Take bettery out, then try again
it will work

i tried EVERYTHING! but it dont help
and battery too!

Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship

Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.

I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!

HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.

Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here

DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!

kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"

x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40