Related
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
1 Run QuickGPS
2 Ensure that in Tomtom GPS is configured as other NMEA, comm 4, and 4800.
I have the same problem. Did you wait long enough? It takes about 10s or more to initialize TomTom itself and then he starts looking for a GPS device. And indeed I ran QuickGPS too, good practice
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
If you read the HTC documentation, you'll see that you've to first (before installing the TomTom software) run the QuickGPS fix application. After that, install your TomTom SW, your card. Normally you won't have to change anything to the GPS configuration. The TomTom SW come configured with "Internal GPS Antenna" and should work like this.
Of course you have to be outside when you run the GPS
Be patient the first time. My Polaris take about 2 to 5 minutes before initializing the GPS. After that, 10 to 20 secs is generally needed to initialize the GPS (cold start).
you've to first (before installing the TomTom software) run the QuickGPS fix application
Click to expand...
Click to collapse
I didn't run quickgps before installing tomtom and it works perfectly.
I reinstall TomTom and choose other NMEA, com 4, 2400.
I will also try with 4800.
In my case, the gps is incredible. It fix gps in 10 to 20 seconds.
Ziggy
pdamd said:
I have an HTC Touch Cruise and have installed TomTom 6 that came with the device. When I start it up, however, I get the message "No GPS Device!" in the lower left corner. Any ideas about how to get the handheld to see my internal GPS? I really thought this should work as the TomTom software provided on the CD appears to be modified for the Polaris.
Click to expand...
Click to collapse
Hi,
Mine works just fine. However, when I start TomTom I also get the message "No GPS Device!" bottom left. After a while it changes to "Waiting for a valid GPS signal..." This is typical if you are not receieving any GPS info because the device can't 'see' the satellites. On the bottom right of the screen you will see 5 'strength' indicators. Tap on this to bring up the next screen. At the top right there will be a battery strength indicator. Under this there is again a signal strenth indicator (with text 0 satelites). Tap on this and you should get the GPS Status screen. Tapping the 'configure button' should show the 'built-in GPS receiver' - tap Select to return. Once you move your device to a position where it can 'see' some satelites this will be shown on the GPS status screen.
In summary, the message really means 'no GPS signal' rather than no GPS device present.
Cheers
Michael
GPS not working, please help!
Hi my friends!
I can't get GPS to work on my TC!!
I know I have to run quickgps first, but ONCE I did, and since that I always get the message that it couldn't connect, try later. I know that there is a file here that I can install on the device, and I did it successfully, but nothing changed.
I have installed the program on the device, it prompted me that it will replace the existing one, and I ran it after a soft reset. Still can't connect.
What is strange for me, is that I have downloaded a program called sirftech, that can tell on which port my built-in device is listening on, but it couldn't find my gps device. It founds somethings on com7 and com9 but to no avail.
on com4 at 4800 nothing happens.
I also install iGO 2006 which is quite familiar here in Europe, but it also cant nor detect neither use any gps. I have been waiting for 20 minutes with this program to get the satellite data, but nothing.
I am lost here!
Anybody having the same problem?
Or my device may be faulty???
moire76 said:
Hi my friends!
I can't get GPS to work on my TC!!
I know I have to run quickgps first, but ONCE I did, and since that I always get the message that it couldn't connect, try later. I know that there is a file here that I can install on the device, and I did it successfully, but nothing changed.
I have installed the program on the device, it prompted me that it will replace the existing one, and I ran it after a soft reset. Still can't connect.
What is strange for me, is that I have downloaded a program called sirftech, that can tell on which port my built-in device is listening on, but it couldn't find my gps device. It founds somethings on com7 and com9 but to no avail.
on com4 at 4800 nothing happens.
I also install iGO 2006 which is quite familiar here in Europe, but it also cant nor detect neither use any gps. I have been waiting for 20 minutes with this program to get the satellite data, but nothing.
I am lost here!
Anybody having the same problem?
Or my device may be faulty???
Click to expand...
Click to collapse
My GPS run well on my TC. First of all, I think it is normal that the program "SirfTech" don't find your GPS because the GPS Chipset into the Touch Cruise isn't a Sirf but it is integrated into the Qualcomm 7200 (processor).
Now to come back to your problem I suggest you to redo the TomTom installation. But before, insure to uninstall the previous version (not apply as an update).
Uninstall TomTom
Restart your device
Run QuickGPS
Reinstall TomTom (from the HTC CD). Install it into the main memory of your device, not on the storage card !
Restart your device
Launch TomTom / configure it
Check the configuration of your GPS (into "Change preferences" => "Show GPS Status" => "Configure" (Select your GPS receiver)
Built-in GPS received should be selected by default. If it is not the case, choose this option
Go outside and wait 1 to 5 minutes (should be less). Normally TomTom will work.
Hope it help.
I had the same problem yesterday. The GPS had functionned well but suddenly it would not start anymore. Once I switched the unit off (press the on/off button for about 5 secs) and on again it worked without problems. Probably you can just do a soft reset by pushing the resetbutton.
Thank you for you answer!!!
I have never installed tom tom, because I already have another navigation software, igo. the problem is that i cannot run quickgps, it is saying "Connection failed. Please try again later."
I already downloaded and installed the quickgps found on this forum, but it is the same.
so does it make any sense installing any program until I can't run quickgps?
or should the gps work also without quickgps just slower at startup?
(offtopic: and why my device sometimes does start charging if I connect to usb cable, and sometimes it does not??)
moire76 said:
Thank you for you answer!!!
I have never installed tom tom, because I already have another navigation software, igo. the problem is that i cannot run quickgps, it is saying "Connection failed. Please try again later."
I already downloaded and installed the quickgps found on this forum, but it is the same.
so does it make any sense installing any program until I can't run quickgps?
or should the gps work also without quickgps just slower at startup?
(offtopic: and why my device sometimes does start charging if I connect to usb cable, and sometimes it does not??)
Click to expand...
Click to collapse
Which ROM are you using ?
Thank you for your post, but I have already tried both the restart and the reset button, but nor helped.
I am getting nervous.
But I have found a solution to my off-topic question: There was a check marked saying "Do not charge the device when turned on and connected to PC" In settings > Power. After I unchecked, it charges from usb even turned on.
I hope that my gps problem is so easy as well, but I just simply can't get it to work...
edsel said:
I had the same problem yesterday. The GPS had functionned well but suddenly it would not start anymore. Once I switched the unit off (press the on/off button for about 5 secs) and on again it worked without problems. Probably you can just do a soft reset by pushing the resetbutton.
Click to expand...
Click to collapse
Thank you, it is
1.25.405.1 wwe; dated 12/11/07
radio is 1.58.21.23
protocol: 25.65.30.04h
academic said:
Which ROM are you using ?
Click to expand...
Click to collapse
SOLVED!!!
Dear friends!
Thank you all for your kind help!
I have solved the GPS problem.
I am so stupid that I couldn't find this solution earlier...
So, Under Settings there is an option called External GPS.
It was not set up correctly. Now the GPS program port is set to COM1, the hardware port is (none), baud rate is 4800, and checkbox is checked, this is important. And igo is set manually to use com1.
Now iGO is able to seen 6 satellites from my desk near to the closed window!!
It is not yet found the position but it is working on it (i am patient as quickgps is still not working)
Thank you all and I hope I will help someone else later.
Moire
What device are you using? I have an HTC p3300 and have had this problem foreverr.
NO GPS Device!!! Please help
I bought my HTC TC yesterday. I previously used the Kaiser.
I've flashed to Bepe rom and then installed Tomtom from the CD.
I have not not been able to get any GPS signal yet.
I have read this thread but it still does not work. The yellow and blue icon on the GPS status screen doesnt move either. I have updated the quickGPS software but it didnt help.
I hve off course chosen internal GPS antenna in the configuration part.
Should I configurate the external GPS application or is it irrelevant anyway since I am not using it? and if yes how? What should be the settings (if this is relevant)?
Should I maybe change my Radio version? Can it help?
Please help
Thanks
Edit: After 2 days of trying it, no it works, I was ready to hard reset and installed sprite back-up. I have no idea why it did not work and why it is working now...
Anyway
my first polaris had the problem to get the position after 10-20 min outside a building , and then the sat-Bars on tomtom sat-konfig jumps around with every satellit forever. sometimes my car goes 347km/h ))). so when i press with my fingers hard on the back near the camera, it fixes the Position on gps. This seems to be a contactproblem between the gps-Antenna and the Receiver. I send it back, got a new one, now it runs like it shut.
it shut also run without quickgps, it only starts slower. Quickgps is just downloading a little database with the sattellites what are now in sight.
otherwise the gps-rec has to wait, to get all sats what are now on the horizon .
i think you have a connectionproblem to the internetserver from witch qgps get the data, if you can surf the internet with the polari, qgps shut download.
hope it helps
Piki
What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Use the attached program to test the GPS.
It will search COM ports automatically
But I guess you can know the port from the settings tabs "External GPS" icon if it's like Kaiser
Anyway, I will be of further use in like 4 days
pjmiebach said:
What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Click to expand...
Click to collapse
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Great that it works
You need at least 4 though to get a fix
Kindly, post your radio info and your location and let me know how many satellites did you view (press up on dpad as the 1st screen shows only upto 8 and it can see more, hopefully)
pjmiebach said:
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Click to expand...
Click to collapse
posting the number of satelites you receive is a bit pointless.
This will depend on many factors such as
1) The number of sats viewable at any given time in your area (the sats are not geostationary and therefore move around)
2) The location of the sats during the test - some could be close to the horizon and therefore have a week signal
3) Weather conditions, cloud rain etc,
4) Terrain
etc
etc
Basically, you are right.
But if you are fast enough, you can test several radios in the same 10 mins.
And you can judge by testing in the same place which radio is better for GPS (Fix & View).
A mention of your location will be a referrence for others.
There's a thread with more radio fuss to hold such info to be useful in the future.
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
peter7 said:
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
Click to expand...
Click to collapse
errr It worked find with TOMTOM7 after taking like 15 min to find it's first fix. Never tried Google maps yet cause my data plan doesn't start until the 8th of Sept.
you can start google maps and check in the right menu for gps and tap that one so it uses the internal gps instead of internetconnection.
it is also a good idea to goto connectionsettings and wipe all existing connections as activesync wont require these and you can download them later from the provider website or by running the carriersetup
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
TT7 and google maps
My tt7 takes 2 - 3 minutes to get a fix.
Google maps takes about 10 secs.
If i start tt7 right after i used gm it takes about 20 secs to get a fix.
I'm gonna try gpsgate and changing the baudrate a bit, see if it helps.
I'll let you know.
** Edit **
GPSGate does the trick for me.
Buy it at your fav appstore and create a new virtual com port for all NMEA progs, go to tt7 gps settings select other nmea device, select the com you just created, at max speed.
com port problem
atreidae said:
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
Click to expand...
Click to collapse
My Raphael do the same but after hard reset will be work again.
mzperxfl said:
My Raphael do the same but after hard reset will be work again.
Click to expand...
Click to collapse
Me too! :-( No, I really do not enjoy hard resets...
Another nice GPS testing software is VisualGPSce. Be sure to get that.
I wonder if the problem was with QuickGPS. VisualGPSce was telling me that it "saw" 11 satellites, but wasn't able to lock onto any of them. I know that it had worked previously, but then I had a couple of days break and QuickGPS had updated it's data during that time. After the Hard Reset, I haven't used QuickGPS.
About the performance... seems to get fix quite fast, but looses them very easily too. I tracked today a half hour buss ride and I frequently lost the connection. (Sure it was not the most optimal situation...). Also the accuracy wasn't that good - well, either the GPS or Google Maps. actually VisualGPS showed that the GPS wasn't very accurate in following what was happening. The velocity would go to 0 only about 10 seconds after the buss had stopped at trafic lights or buss stop. Actually the buss frequently took of before the GPS showed us stopped. And then it was extremely slow on catching up. On Google Maps you could see the dot still advancing when the buss had stopped for that 10 seconds. Completely off the road - but that might as well be Googles error.
I do not have TomTom on this, but certainly the speed accuracy from VisualGPSce is not nearly as accurate as my TomTom 720.
Check also that the assisted GPS is not active.
If this option is actived, you lose the signal each x seconds.
To check this option I use Advanced config.
Note : I've a Diamond and one Raphael, same configuration, the Diamond find a fix into 40sec and the Raphael takes sometimes 5min!!!.
NLS said:
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
Click to expand...
Click to collapse
i find this to be true as well but the kaiser gps radio worked far better than this touch pro in every app I tried. I can put the TP in my car window and get a signal with random disconnects but if i put it in my lap i cant get anything. I could put the kaiser in my trun and be fine lol. Hopefully some upgrades to the radio software will be coming soon. Same result with me with .19 and .31
Hello,
I tested GPSTuner 5.4, VisualGPS, GoogleMaps and TomTom 7 and I have a strange problem... I installed thos programs after hard reset to be sure...
In the GPS information window the GPS position changes but the speed is always 0km/h and in TomTom or GoogleMaps my position on the map don't move...
Have you seens this problem ?
Any kind of solution ?
PLZ....
PS :
Where can I find rom &Radio version ?
What is your TomTom 7 version ?
Hello All..
this is my first post. I just received my TP today via Vodafone. I havwe sucessfully loaded on TomTom 6 and I have it working with the TT external GPS receiver.
can someone advise me whether the Touch Pro's internal GPS will work and if so, how do I go about setting it up.
PS, I only see 4 options in TT6, and none say internal.
Thanks in advance for any assistance
what to do about navigator 7 ( tomtom ) with gps 1.20 when i start tomtom the first time , it can take up to 1/2 hour to get gps signal whit the internal gps.
when i use my external globalsat gps i have signal in less then 30 secconds.
anyone has anny ideas????
Did you already use the program called "quick GPS" on »Programs?
Normally fisrt time you tried to get signal take a long time, after shoud be less time. My pro is slow, sometimes take up 2 minutes, not more.
Try to use "Quick Gps", this program can "say to GPS" your position trough GSM signal I think...
Robert
Yeah, my Pro normally takes about 2 mins, using Quick GPS. However, that's a lot slower than my Kaiser used to connect - even from cold it would often get a lock within 30s.
What I have noticed with the Pro is that although it takes a long time to get a lock, when it does it is always on 4 bars or more. Makes me wonder if there is a setting somewhere (in the registry maybe?) which tells it not to report it's connected until it has a lock on several satelites?
Is there perhaps a way to get it to connect faster, but with fewer sattelites so perhaps slightly less accurate?
Rowan
I did all what you say and still no gps fix :S
can somebody please help ???
I'm the same. I managed to get a fix using Google Maps when on the road 3 days ago, but I can no longer get a fix with the same program. I've installed TT6 and cannot get a fix - just says "No valid GPS signal". With my Nokia E90, I get a fix sitting indoors on the sofa!!
Any help anyone?
AMoosa said:
I'm the same. I managed to get a fix using Google Maps when on the road 3 days ago, but I can no longer get a fix with the same program. I've installed TT6 and cannot get a fix - just says "No valid GPS signal". With my Nokia E90, I get a fix sitting indoors on the sofa!!
Any help anyone?
Click to expand...
Click to collapse
same here and I have done everything in all of these and other posts. TO me it jeust seems the internal gps is just not as good as th kaiser was
work around
hi,
i was bothered by the same issue.
i found that googlemaps gets a fix within 10 secs.
tt7 takes 2 to 3 mins. if i start gm first and get a fix, close gm and then start tt7 i have a fix in 20 secs.
gpsgate has the same effect. i created a virtual com port with gpsgate, and selected that port in tt7.
i prefer the gm workaround because gpsgate is not free and has to be terminated every time after use, or it`ll drain the battery.
please post your results if you try this yourself.
start quickgps and download the new file.
start tt7 and choose built in gps.
exit tt7
turn device off (long press on powerbutton)
turn it on
wait for it to boot and start tt7 and wait till it has found the gps.
walk to an open area and keep walking. it will find a fix faster that way.
Delete the Logs
This has worked for me...
Was having loads of problems with TT7 and googlemaps (altho that performed better than TT7)
Spotted elsewhere on this site (sorry, dont remember where exactly, was for a different phone tho...)
DELETE THE GPS LOGS!
Power down the phone, once its restarted, in file explorer, delete the GPS logfiles from the windows directory. (sorry, cant remember their exact names, but they're pretty obvious).
Now TT7 works reliably.
philg2000 said:
This has worked for me...
Was having loads of problems with TT7 and googlemaps (altho that performed better than TT7)
Spotted elsewhere on this site (sorry, dont remember where exactly, was for a different phone tho...)
DELETE THE GPS LOGS!
Power down the phone, once its restarted, in file explorer, delete the GPS logfiles from the windows directory. (sorry, cant remember their exact names, but they're pretty obvious).
Now TT7 works reliably.
Click to expand...
Click to collapse
GPSLogFile
GPSLogFileBack
deleted these and it seems to make tomtom find the gps faster and work better .. but still the reception is not that great..
Okay I had to repost this. Ages ago when I first got my HTC Touch (Vogue) and finally got the 6.1 upgrade from telus there was a ton of hurdles to get over to get the GPS working...
That said.. my Vogue gets a lock literally within seconds each and every time. It's a pain to go to the touch pro (ATT FUZE) which takes minutes.. if it even gets a lock at all in tomtom. I'm just wondering if a similar fix that was used for the Vogue could be applied to the fuze..
I'll list the process below and let me know what you guys think.
Aaron McCarthy said:
Alright.. Thanks to
Originally Posted by ghettofreeryder on howard forums.
Alright, I think I got to the bottom of this gps nonsense. I belive the problem is that the GPSone data in the radio is not set up properly. I opened up the settings with QPST, and the PDE informaiton is not setup.
the settings should be as follows
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE
This process is a bit.. not tedious or anything but just safty's sale for a good read look at the thread linked below for a guide to getting the QPST program working.. how to get it to connect to your phone etc. Side note.. You have to install the WModem drivers on your computer in order for it to connect properly and you'll need to install the GetSPC program on your phone in order to get the service programming code. That said.. you also need to download the QPST program (obviously). All of which (including the guide) here: http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
You'll need to run the GetSPC program on your phone. when you open QPST and you add the COM4 port and you open the service programming it should say your ESN HEX at the top put that code into GETSPC (again GETSPC runs on your phone) and then it will generate your SPC..in the service programming click read from phone and enter the SPC it generated for your and it should work. Thats the code you need to get access into the phone via QPST.
Now follow that in order to connect to the program and go pretty much to where you have to put in all that information ghettofreeryder gave us. Make sure you redial the ##3424 code to get out of the settings in your phone.
Then once that's done. Download a1Jatts smartgps cab which will activate the smartgps in the registry of the phone. Do a soft reset and you are good to go. Make sure you put in ALL the right information. I forgot to put in an 8 in the PDE Port Number at first so I had 889 not 8889. I didnt get any quicker locks so checked and put in the right number and worked like a charm. I got locks on 6-7 satellites in my basement with a few seconds.
Click to expand...
Click to collapse
Now obviously the IP address wont be the same as thats the IP for Telus.. but .. I mean come on.. my phone literally gets a lock in seconds even indoors! So this has to some how be able to help us out with the touch pro! If it cant maybe some variation of this method can.
okay so we're up to almost 300 views and not a single responce.... I take it that means no one really has any idea's if this would work or not. I'd give it a shot myself but I have my wedding in 5 days so I dont really have time to mess around with this.. maybe after though!
to my mind the 300 views are because of the title of your thread. most people searching for a solution for the gps problem do it because of the lag. fixing satellites is as fast as with my kaiser. the only problem is the lag.
i´m sure you would get a quick fix when you disable agps and use quickgps.
Aaron McCarthy said:
okay so we're up to almost 300 views and not a single responce.... I take it that means no one really has any idea's if this would work or not. I'd give it a shot myself but I have my wedding in 5 days so I dont really have time to mess around with this.. maybe after though!
Click to expand...
Click to collapse
Matthes42 said:
to my mind the 300 views are because of the title of your thread. most people searching for a solution for the gps problem do it because of the lag. fixing satellites is as fast as with my kaiser. the only problem is the lag.
i´m sure you would get a quick fix when you disable agps and use quickgps.
Click to expand...
Click to collapse
I have agps disabled and update quickgps religiously, but I'm not sure how much quickgps really helps. When I've been using the gps regularly, I get locks (in TomTom) in under a minute. If I haven't used the gps in a few days, even with a fresh quickgps update, the satellite screen shows the position of 6-9 satellites, but the gps still takes 10 minutes or more to start reporting data and secure a fix.
Just my .02
GPS Issues
I have similar problems on my AT&T Fuze. On the first run of google maps or Pocket CoPilot it works great with a lock on of usually 1 min.
But if I need to shutdown the app for any reason and restart it, then the software will say, GPS not found, then GPS found looking for signal, then go back to GPS not found and keep cycling like this.
What usually fixes this is a soft reboot. I certainly hope a patch can fix this.
It is a pain, especially when my Tilt did not do this.
James
TURBO GPS fix on Touch Pro
(contrary to many of the GPS fixes offered on the net)
I read a lot of fixes on how to make the Touch Pro lock on to GPS faster. Being an ex-owner of toshiba G810, which is the fastest GPS PPC i tried ever before, and noting that it uses the same GPS chip as in the Touch Pro. I tried to emulate the settings in the registry, and i got an excellent result, so would like to share that with you.
1) Many of the fixes on the net talk about turning off the A-GPS , i think this is "wrong" thing, cos when A-GPS is turned off, it would not be able to use the valuable satellite data downloaded from QuickGPS. Therefore, i use Advanced Configuration Tool to turn it back on (ENABLED).
2) I changed the HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\Drivers\GpsOneDevice\PollInterval -> 500 (default is 1000),
which is the same figure as in my Toshiba G810 before.
3) keep the log files untouched, i.e., DO NOT delete:
\windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
(if you have deleted those 2 files before, just create 2 blank .txt files with those filenames and put them back in \windows. When new GPS data comes in, it will append to the blank files, older data get deleted once reached the 32K limit set below.)
4) keep maximum size of logfile to the default which is 32K
Voila, now my Touch Pro always get 4 to 5 BLUE bars on my mapking (which mean dead lock on!!!) And it it wont fluctutate lock on and off intermittently.
Really urge you to try it, and let me know if you get the same results~~
Cheers everyone!
(For those who dont like tweaking with registries manually, krish_nank has been kind enough to make it into a .cab which i attach here.)
nice experience, i'll try it
hoangtuvn said:
nice experience, i'll try it
Click to expand...
Click to collapse
Please write back to see if it works welll for you. And make sure you use QuickGPS once afterwards to get the satellite data before you start GPS.
I don't have any kind of data connection with my network so AGPS is useless for me, however I did try changing the polling from 1000 to 500 and I managed to get a lock with GPS test within a few minutes inside my own house! Can't remember getting the same results before.
I can only agree that
1 - touching log files is BAD.
2 - reducing poll interval will improve the GPS lag slightly
3 - keeping A-GPS up - in my country there is no A-GPS data available since thats the data provided by the provider over the local network cells. I dont think it has anything to do with the data from Quick GPS. But i might be wrong. Anyway, Quick GPS is your friend.
4 - if you have fix problems its usually either not having Quick gps data or trying to get a fix in a bad area or under a shielded windscreen.
overtweaked?
I changed the pollig interval to 100... is it milliseconds?
I haven't tried it yet but would it be a battery drainer like this (100)?
Actually I was hoping to reduce the delay of map in garmin or oziexplorer (which are my favourites) in higher driving speeds. I tried garmin while driving over 200 km/h and there was a damn nasty delay on the map. Of course it was a stupid risk to watch the screen during these speeds
I tried 1000 (default), 250, 125, and 64 Pollinginterval and none of them were as fast as 500.
well it would be slower because you are polling to often then. best thing to do for your gps speed is update your radio to 1.12.25.19. it doesnt take long to do. then make sure agps is enabled and update your quickgps data. increasing polling from 1000 to 500 might help but i havent tried yet.
ok i changed the polling and with my radio and quickgps i got a lock in under 2 seconds. i havent seen any gps device that could do that.
The Jack of Clubs said:
ok i changed the polling and with my radio and quickgps i got a lock in under 2 seconds. i havent seen any gps device that could do that.
Click to expand...
Click to collapse
Thanks for your testing.
It seems that Toshiba G810 polling setting (i.e. 500) really works for a lot of us.
I was originally so amazed at how G810 could do it, and was so sad to see how bad my Touch Pro (which costs twice compared to the G810) is performing.
I'm glad at least now i can make my Touch Pro just as fast.
hkwildboy said:
TURBO GPS fix on Touch Pro
(contrary to many of the GPS fixes offered on the net)
I read a lot of fixes on how to make the Touch Pro lock on to GPS faster. Being an ex-owner of toshiba G810, which is the fastest GPS PPC i tried ever before, and noting that it uses the same GPS chip as in the Touch Pro. I tried to emulate the settings in the registry, and i got an excellent result, so would like to share that with you.
1) Many of the fixes on the net talk about turning off the A-GPS , i think this is "wrong" thing, cos when A-GPS is turned off, it would not be able to use the valuable satellite data downloaded from QuickGPS. Therefore, i use Advanced Configuration Tool to turn it back on (ENABLED).
2) I changed the HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\Drivers\GpsOneDevice\PollInterval -> 500 (default is 1000),
which is the same figure as in my Toshiba G810 before.
3) keep the log files untouched, i.e., DO NOT delete:
\windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
4) keep maximum size of logfile to the default which is 32K
Voila, now my Touch Pro always get 4 to 5 BLUE bars on my mapking (which mean dead lock on!!!) And it it wont fluctutate lock on and off intermittently.
Really urge you to try it, and let me know if you get the same results~~
Cheers everyone!
Click to expand...
Click to collapse
I have not had issues with mine with warm or hot starts (most was 30 seconds). What I need to know is from a cold start, how long it takes to perform a fix (you can verify using the HTC GPS tool).
To do a cold start, reset the unit with the button near the USB connector or if you have StartXP, use that.
I think wildboy did do a soft reset, it's kind of standard on XDA.
ok i changed the polling and with my radio and quickgps i got a lock in under 2 seconds. i havent seen any gps device that could do that.
Click to expand...
Click to collapse
Without AGPS? Or is quickGPS similar... can't remember I forget now
agps needs to be enabled for quickgps. agps hindered gps on older radios. the newest radio works really well with agps and quickgps.
Agent Blair said:
I think wildboy did do a soft reset, it's kind of standard on XDA.
Click to expand...
Click to collapse
I kinda figured as much, but I just want to be sure. Mainly because with my current settings I am getting the same performance, except when I have a cold start. I am trying to figure out a way to get better cold start performance.
Thanks a million .. your tweak is working great. now i can get my GPS locked in 7 seconds
Once again thank you.
omg, this worked for me indoors
I never played with the Log file....
I do not have a GPS*.txt file in my windows folder, using EnergyROM 2.0 4.12.09...
Will those/can those files be generated by a program other then quick gps or visualgpsce?
BBM-Lee said:
I never played with the Log file....
I do not have a GPS*.txt file in my windows folder, using EnergyROM 2.0 4.12.09...
Will those/can those files be generated by a program other then quick gps or visualgpsce?
Click to expand...
Click to collapse
Just install AdvancedConfig, this will allow you to edit the buffer size of the log files and verify their are log files in that ROM. Then you just need a Registry Editor to adjust the polling time.
Pretty strange but I haven't modified mine at all and it locks on in about 10-15 seconds which I think is pretty good, or isn't it?
TriAxisFL said:
Just install AdvancedConfig, this will allow you to edit the buffer size of the log files and verify their are log files in that ROM. Then you just need a Registry Editor to adjust the polling time.
Click to expand...
Click to collapse
Sorry, slight miscommunication..
I'm using EnergyROM 2, and i'm familiar with Adv. Config & Registry editing..
Default setting was no logging, and I can't point adv. config to the log file that doesn't exist.
If i just make ablank log/text file, and point it, will that work? Or do the log files need to have certain information in them in order to not screw up?