Compiled from official firmware for HTC Snap. Only the English language. Keyboard layout as on the devices from Vodafone.
http://www.ziddu.com/downloadlink/9250620/my_rose652.rar
Thanks Caramba,
It's as good as your prvious release, My_rose_wm6.1.
Maybe even better
Caramba you are the best. i have tried the your Previous version on Palm 500v it is excellent, today i will try your new version and update it, thanks
April 08
I have Flashed the WM 6.5 on my Palm 500v it is working Excellent, so far no problem.. thanks for the ROM
praveenkreddy said:
Caramba you are the best. i have tried the your Previous version on Palm 500v it is excellent, today i will try your new version and update it, thanks
April 08
I have Flashed the WM 6.5 on my Palm 500v it is working Excellent, so far no problem.. thanks for the ROM
Click to expand...
Click to collapse
Just wait a bit longer, Caramba is busy cooking a wm6.5.3
If it is just as stable as the current 6.5 I'll go for it.
Thanks a lot for this one! I like this more over your 6.5.3, because it has more features like the weather panel and the better audio player.
Still I have one question. Im using Palringo as IM, which puts a notification Icon in the taskbar. Is there any way to enable this icon also in the taskbar of the homescreen? So you can see when you got new messages right from the homescreen. Would be of course even cooler if it would be possible to include it in the notification panel on the home screen, but i think thats not possible..
Thanks for this one
chillar
I've never used Palringo, and unfortunately I can not help.
thank you! My setup is wonderful to use. There are no what happened. a better version
Hello Caramba.
I appreciate your hard work on this one. I been looking for a solution for my phone for a long time!
I have a problem flashing this rom. When i turn on the device with the bootloader, it does not autoflash.
It shows the PALM logo and in text on top it says:
EBOOT7 Ver:V4.0.0 ExtROM:ESN
My phone is a palm treo 500v from vodafone spain, and its locked, as it comes with the carrier ROM.
I already formatted the 4Gb microSD card and copy the ABI file into it.
Is there any step or application that im missing?
Thanks again for your awesome work.
Ale.
ariasale said:
Hello Caramba.
I appreciate your hard work on this one. I been looking for a solution for my phone for a long time!
I have a problem flashing this rom. When i turn on the device with the bootloader, it does not autoflash.
It shows the PALM logo and in text on top it says:
EBOOT7 Ver:V4.0.0 ExtROM:ESN
My phone is a palm treo 500v from vodafone spain, and its locked, as it comes with the carrier ROM.
I already formatted the 4Gb microSD card and copy the ABI file into it.
Is there any step or application that im missing?
Thanks again for your awesome work.
Ale.
Click to expand...
Click to collapse
OK. Reading a bit further in another thread, i found another guy with the same problem. The result was that my microSD card was too big for the bootload to run the ABI file (?). Anyway, i bought a smaller 1Gb microSD card and worked fine!!! It started to load the new ROM right away. It was worth it (10€)
BTW thanx again to caramba for the ROM. Now i have a neat UI, and i assume the phone is unlocked! Havent tried with another carrier yet.
Thank you.
Hello all.
I tried the phone with a different (movistar) sim card. it wont work. the phone is still blocked. cant believe it!
The phone shows: the sim card has been blocked from the target network.
is this normal? i mean, i have changed the rom using the caramba .abi file and the phone is still blocked. I already tried the 6.5.2 and 6.5.3.
I was assuming that changing the rom, it should be unlocked.
what else can i do to unlock it?
Thanks in advance.
This ROM has some important issues: 1. Menus like *100# simply does't work. 2. Sim contacts are not displayed even thought are selected. It only appear in SIM manager. I'm also a HTC Snap owner and i know how things should work.
Spanish Keyboard
Hello,
I am Spanish and I do not mind using the software in English, my question is, can you put the Spanish keyboard language in regional settings.
sorry for my English
Well, good job, it seems that 6.5 is somewhat faster than 6.1, however, the reason for which I have updated is because of the USB charger issue (the phone charges only when powered off) and my ISP connection. These problems persist in this version too. USB charging worked flawlessly with its Vodafone ROM, same with the Internet. Is there a fix for this?
At least can you provide a link or point to some direction where I can find what I'm looking for?
LE: I can confirm also that SIM contacts do not show in this version.
Net connections seems to work now, that leaves the sim contacts and usb charging issues.
Word Completion
Hi,
I flashed my Treo 500 with this rom as the 6.1 really didn't work on it.
USB charging does work with a cable from my laptop, but yes charging direct from a socket will only charge when the phone is off.
The biggest thing for me though is that I've got word completion on all the time as I type and I hate using it. There aren't as many options in the settings as normal and I can't find a way to turn it off.
Can anyone help?
Thanks,
Craig
Related
Hi guys,
I have bought an Anextek SP-230 PC Phone, and I read that QTEK 2020/XDAII has this little program included in the ROM file.
Considerating that Anextek PDA has already the necessary Registry Keys and I need the Sim Toolkit as I perform serveral banking operations, I would like to know if someone can send it to me, because I tried to dump it from the XDA Rom and from Extended Rom but without luck.
Thanks in advance
Here is the version from my imate (ROM 1.72).
I don't believe that it will work.
I hope there are all relevant files in the zip....
Happy trying...
Stefan
Thank you very much for the attachments.
All the libraries are already present in the PDA; the program launches correctly, however unfortunately I think that the program handles in a wrong way my SIM card driver and is unable to find the services (because it says that "there are no applications installed on your SIM").
However I would like to thank you guys again.
Glad to help. Sorry it does not do what you wanted it to.
FWIW - it does the same thing with my SIM, T-Mobile does not put apps on the SIM.
I'm quite sure that in Vodafone IT 64k SIM cards are present some apps (they also offer the possibility to change the installed services over the internet ). I fear that QTEK/XDAII has a completely different way of handling SIM because also MMS Composer runs perfectly but is unable to detect the contacts (Anextek Sim Manager instead show them correctly)
Im also having an issue on the sim toolkit for my xda2.
My sim has mobile banking installed in it. When the xda2 is fresh from a soft reset, the application on the sim is accessible, but after a while, it tells me that there are no applications installed in my SIM.
Does anyone know how to solve this? I hate to have to reset my xda2 everytime, the sim toolkit tells me that there no applications installed.
Thanks
Hi,
Are you using SpbPocket plus 2.1? It may be this one that's causing your SIM toolkit not to work... just maybe... [/quote]
Hi,
Are you using SpbPocket plus 2.1? It may be this one that's causing your SIM toolkit not to work... just maybe... [/quote]
re:
Yes i am. It could probably be the reason. Is there a work around? But i also noticed that when i use my wife's sim card, it works fine even after a while
Well, I haven't figured out yet a workaround for that. I am not using Spb Pocket Plus now since I noticed it is also slowing down some of my apps...
i found the workaround. I disabled the CLOSE button in SPB pocket plus. Disabling the CLOSE button also solves the unwanted Hard Reset and duplicate sent SMS in my case.
That's great! I'll try to do that...
1st things first complete noob i apologize for any stupidity in the following post. Right i have faria wm6 ROM on my phone it is unlocked and i did all the steps to installing as to the instructions on this forum. Now heres wots happening my device will not load past the boot screen where it says windows mobile unless i take the battery out, now i thought it might be because of the new american dst so i ran the microsoft cab to patch it up. Well no luck there i sync my time it lags so much so i take the battery out it resets to feb 2006 and it's fine. Also active sync is a pain when you click sync the bar comes up at the bottom and thats it no roatating arrows the softkey does not change to stop. Also when i configure my exchange it says message format and i can change to plain txt or html well wen i first used it i could change it to html but now its stuck on plain txt but i dont know whether thats a setting my exchange provider has to change on there sever - i dunno. But it all seems to revolve around active sync and the devices time. Please help or point me in the right direction because i would hate to go back to t-mobiles rom which is boring!
Any help much appreciated
P.S sorry if this has been posted many a time maybe looked in wrong place but plz post link.
Cheers Guys
dnlohara said:
1st things first complete noob i apologize for any stupidity in the following post. Right i have faria wm6 ROM on my phone it is unlocked and i did all the steps to installing as to the instructions on this forum. Now heres wots happening my device will not load past the boot screen where it says windows mobile unless i take the battery out, now i thought it might be because of the new american dst so i ran the microsoft cab to patch it up. Well no luck there i sync my time it lags so much so i take the battery out it resets to feb 2006 and it's fine. Also active sync is a pain when you click sync the bar comes up at the bottom and thats it no roatating arrows the softkey does not change to stop. Also when i configure my exchange it says message format and i can change to plain txt or html well wen i first used it i could change it to html but now its stuck on plain txt but i dont know whether thats a setting my exchange provider has to change on there sever - i dunno. But it all seems to revolve around active sync and the devices time. Please help or point me in the right direction because i would hate to go back to t-mobiles rom which is boring!
Any help much appreciated
P.S sorry if this has been posted many a time maybe looked in wrong place but plz post link.
Cheers Guys
Click to expand...
Click to collapse
This post makes no sense to me. First you say you can't boot past the 3rd splash screen (Windows MObile 6). Then you start talking about doing cab files and other stuff (which indicates you are past this screen and working on your device).
Please take a breath and give us more information and full details of exactly where you are at. You also have to tell us your current IPL, SPL, and OS versions that show when you boot the phone (we need exact numbers to be able to help). Is your phone a G3 or G4? What is the last / current ROM you have on your phone? Are you now able to get into your phone (ie: did you flash back)? Is your phone CID Unlocked?
Sorry for my confusing post. I am able to get past the boot screen if i take my battery out and put it back in but turning on normally It wont get past if you get what i mean. further explained below...
Heres my numbers: ipl is 2.21, spl 2.21 os 2.18 gsm 02.19.11 , it is CID unlocked, it was flashed to farias rom from t-mobiles latest rom. Ive flashed farias rom twice now going back to t-mobiles first in both instances.
The main problem i seem to get is with the devices time - i'll try to explain this as well as i can - if the devices time is set to now then it is really slow and active sync does not work and the today screen will only show the time and nothing else like messaging, live, tasks, calender etc. and if you reset the device it does not get past the boot screen. Taking the battery out therefore reseting the devices time it works great but changing the time back to now and it lags again. Hope you understand this
P.S. I have installed microsofts dst patch
dnlohara said:
Sorry for my confusing post. I am able to get past the boot screen if i take my battery out and put it back in but turning on normally It wont get past if you get what i mean. further explained below...
Heres my numbers: ipl is 2.21, spl 2.21 os 2.18 gsm 02.19.11 , it is CID unlocked, it was flashed to farias rom from t-mobiles latest rom. Ive flashed farias rom twice now going back to t-mobiles first in both instances.
Click to expand...
Click to collapse
I honestly don't know if this will help, but you might try flashing the latest TMobile US ROM to get you to 2.26 instead of 2.21
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Then flash Faria's over that. Note that the 2.26 ROM will put the 2.25 Radio on your phone. You may want to then get the 2.19 UK radio from the ftp site here and go back to that one (I find the 2.19 works better than the higher versions on WM6 for me).
Also (and maybe before doing what I just suggested) try either turning off BatteryStatus, or upgrading it to 1.04.201 Beta 3. There have been fixes and I had a lockup problem (I couldn't reboot my phone if the USB cord was plugged in and BatteryStatus 1.04.200 Beta 2 was running). I'll attach the cab to this post.
The main problem i seem to get is with the devices time - i'll try to explain this as well as i can - if the devices time is set to now then it is really slow and active sync does not work and the today screen will only show the time and nothing else like messaging, live, tasks, calender etc. and if you reset the device it does not get past the boot screen. Taking the battery out therefore reseting the devices time it works great but changing the time back to now and it lags again. Hope you understand this
Click to expand...
Click to collapse
Are you overclocking or anything? Have you installed other apps, or does it work this way right after installing Faria's WM6 rom?
Faria's WM6 ROM is very good and I've never seen stuff like this reported so it seems its something with your setup. You could try flashing the fixed mUn's ROM ( http://forum.xda-developers.com/showpost.php?p=1172977&postcount=361 ) and see if it behaves the same way. If it does then you have an issue with your phone it would seem. If it doesn't then its an interaction with software on the device.
P.S. I have installed microsofts dst patch
Click to expand...
Click to collapse
You don't have to install this on WM6.
Hello all,
A simple question.
How can one tell what kind of a unit he has, is it WWE or is it ASIA or maybe another, I have bought my unit 2nd hand and since then had problems with the softwares and radio roms.
I have used WWE rom, and I just can not get all my contacts in, I have used ASIA and for a few days all was working fine, till something happens I reset the unit and either data is lost or the radio has no signal etc.
Another question, is it possible to stop the Automatic Customization after a hard reset???
Your help would be much appreciated.
WWE or Asia depends on installed ROM. Type can be Polaris 100 or Polaris 200, AFAIK, and is visible during hard reset.
What ROM are you using now? Looks like trouble with ROM or bad device.
Customization can be stopped, if I remember correctly, but you should check this thread: http://forum.xda-developers.com/showthread.php?t=355277&highlight=Polaris+tips+tricks
Hi,
Many thanks.
For the moment I am using a cooked rom Khanx 1.6 Pro.
I was really fed up with the Original Rom as I said it was fine for a few days, working smoothly, even backups by SPB were fine, and suddenly one day the unit froze and I had to reset after the rest nothing worked, all data lost.
Even after Hardreseting I was having problems with 'VDDemon' each time, only after re-installing the rom for a few times I was able to go back to working with it.
I mainly use the unit for telephone (ofcourse), mail, notes and sms.
By the way when I enter bootloader, I can see POLA100 MFG, and the SPL-2.20.Olinex, CPLD-2.
And what I meant about the Automatic ..., when you hard reset the unit you get a windows saying that in 3 seconds and automatic instal is beginning, how can one stop this instal????????
So really I am not even having fun with it at all.
OK, Pola 100 is here too, but SPL is original HTC.
Could you try device for few days with "bare" ROM, meaning no other software installed? Maybe it's software incompatibility.
For stoping customization check thread I mentioned, think it's described there. But I might be wrong, it could be some another thread. In any case, I remember reading about it here and a way how it can be stopped.
My Polaris is stable as stable Windows device can be...
Bodisson said:
OK, Pola 100 is here too, but SPL is original HTC.
Could you try device for few days with "bare" ROM, meaning no other software installed? Maybe it's software incompatibility.
For stoping customization check thread I mentioned, think it's described there. But I might be wrong, it could be some another thread. In any case, I remember reading about it here and a way how it can be stopped.
My Polaris is stable as stable Windows device can be...
Click to expand...
Click to collapse
What do you mean SPL is original HTC?
It is Oli's SPL...
Hey Guys, im a newb here and I had a question about my unlocked AT&T Fuze.
I did a hard reset today because my system started acting up, after i did the hard reset, it almost seems like it deleted AT&T's rom and went back to the original raphael rom. Now my physical keyboard is mixed up (i.e. if i press the windows key in the top left corner, it types one) almost as if I had a standard unlocked touch pro that is non-branded. does anyone know how to fix this so the keyboard will go back to typing what is actually written on the keyboard or does anyone know where to get the AT&T rom.
Thanks
A.K.
Hi,
I suspect your unlocked AT&T Fuze is running an HTC TouchPRO ROM. Possibly put on there by whomever unlocked your device.
The following link contains a .CAB that will configure you keyboard layout for AT&T.
[CAB] Touch Pro Keyboard in Fuze ROM, and vice-versa
http://forum.xda-developers.com/showthread.php?t=474192
HTH,
Thank you,
ill try it out right now and see if it works, i really appreciate it.
also, while i was looking for an answer, i found a thread with a link to the original HTC Fuze rom, would it be wise to install the original rom or do you guys think i should keep the current rom?
thank you
Thanks, I ran the cab file and it worked.
I also figured out how to edit the registry so it would work as well.
Thanks again
A.K.
Pls i need help installing android on my sprint cdma phone(i dont use a sim card). i have searched threads for a solution but couldnt find any to help me. when i install the android GBXOA(gingerbread) on my phone. i loose my network n keeps saying insert sim card plus my wifi dont work. Pls i'll really appreciate it if someone can help me out. thanks
prexzone said:
Pls i need help installing android on my sprint cdma phone(i dont use a sim card). i have searched threads for a solution but couldnt find any to help me. when i install the android GBXOA(gingerbread) on my phone. i loose my network n keeps saying insert sim card plus my wifi dont work. Pls i'll really appreciate it if someone can help me out. thanks
Click to expand...
Click to collapse
for starters in order for android to work you need to remove the sim cd is only useful when yor traveling out of the country you dont need a simcard here in the states and all the developers I talkwith will tell you the same thing next thing do you ve a rom that is rodium cdma compatible I know 95 civic has a pretty stable I had a collectionsog roms like calkulins that worked great when you dual boot PM ME and will send them you to that way keep in mind I am not a developer nor am I taking credit for any ones work im just point you in the right direction, although might suggest my favorite rom from BigNadad
I fin the to be more stanle and hs always updating and after a fresh install do a hard reset and everything will work.
i installed this rom on mine a week ago, and everything works great. Only thing that does not work for now is the camera functions. Other than that, network, gps, google navigation, everything works great. am not going back to win 6.5. android is much better.
http://forum.xda-developers.com/showthread.php?t=627997
That is the one i used and everything works out of the box except camera function only.
ayamudu said:
i installed this rom on mine a week ago, and everything works great. Only thing that does not work for now is the camera functions. Other than that, network, gps, google navigation, everything works great. am not going back to win 6.5. android is much better.
http://forum.xda-developers.com/showthread.php?t=627997
That is the one i used and everything works out of the box except camera function only.
Click to expand...
Click to collapse
Maybe for you, but the 'not working' portion in the thread itself says Bluetooth isn't working (a major showstopper for those of us in 'hands free' states)
Yep need the bluetooth
Anyone getting a fully working version of android going on the CDMA touch pro 2any time time soon? If you have any info on this I would love to hear it before I go and upgrade at the store. Thanks
ayamudu said:
i installed this rom on mine a week ago, and everything works great. Only thing that does not work for now is the camera functions. Other than that, network, gps, google navigation, everything works great. am not going back to win 6.5. android is much better.
http://forum.xda-developers.com/showthread.php?t=627997
That is the one i used and everything works out of the box except camera function only.
Click to expand...
Click to collapse
can i still change back to my win 6.5? cos i most definitely will need my camera sometime
Camera WORKS on android, follow the guide in my signature and you should be up and running in no time.
You will have both windows and android on the same device. Android will reside on your SD Card and you can run it from within windows whenever you want to. (there is a .exe you can run)
Bluetooth is the only thing on android not working (froyo).
On gingerbread GPS and Bluetooth don't work I think...
ryannathans said:
Camera WORKS on android, follow the guide in my signature and you should be up and running in no time.
You will have both windows and android on the same device. Android will reside on your SD Card and you can run it from within windows whenever you want to. (there is a .exe you can run)
Bluetooth is the only thing on android not working (froyo).
On gingerbread GPS and Bluetooth don't work I think...
Click to expand...
Click to collapse
Thanks a lot man. it works fine but i got some problems. im sorry for bugging u. i hope u dont mind. i know i shud expect that bluetooth and wifi dont work n i saw that. but my problem is i cant use my sd card n that wont let me use the camera cos when i try to use the camera it says insert sd card. another thing is i dont have a home button. how can i dedicate a key for my home button? thanks once again
i fixed the sd card problem by formatting my card n my camera works fine. i installed the wistilt2 kernel to correct the red led light but now i discovered if i download an app. i cant fine it on my menu. pls wats wrong?
my pic message isnt working n 3.5mm jack not working too. can anyone help? or pls link me to a thread that can help me
sapperpipo said:
for starters in order for android to work you need to remove the sim cd is only useful when yor traveling out of the country you dont need a simcard here in the states and all the developers I talkwith will tell you the same thing next thing do you ve a rom that is rodium cdma compatible I know 95 civic has a pretty stable I had a collectionsog roms like calkulins that worked great when you dual boot PM ME and will send them you to that way keep in mind I am not a developer nor am I taking credit for any ones work im just point you in the right direction, although might suggest my favorite rom from BigNadad
I fin the to be more stanle and hs always updating and after a fresh install do a hard reset and everything will work.
Click to expand...
Click to collapse
im new to this and i have a similar problem what i did was reinstalled the gingerbread on my sd card just like you said and got everything to work but it tells me i dont have a SD card mounted and i cant figure out why i have tired just about everything on here to fix it maybe i missed something so can anyone help??
lundgren92 said:
im new to this and i have a similar problem what i did was reinstalled the gingerbread on my sd card just like you said and got everything to work but it tells me i dont have a SD card mounted and i cant figure out why i have tired just about everything on here to fix it maybe i missed something so can anyone help??
Click to expand...
Click to collapse
u need to format ur card with hp tool or sd formatter(i used this one). once u do a full format u'll be fine
If I have to go through this in which I was thinking about trying xdAndroid on my tp2, I might as well wait a little longer until the next build is fully functionable.
lascott7 said:
If I have to go through this in which I was thinking about trying xdAndroid on my tp2, I might as well wait a little longer until the next build is fully functionable.
Click to expand...
Click to collapse
Actually if you go into the android development forum and go to arrrghhh's FRX06's thread and read the FAQ along with the entire first post and also read ryannathans's thread titled introduction to android-sd card, you'll be fine on it. If you are completely new to it, don't start making tweaks other than updating the kernel (read about this in ryannathans thread), read and follow instructions and you'll be fine. Now you won't have working bluetooth at that point, but hopefully that's in the near future and good things come to those who wait. If you'd rather wait for the new build FRX07 whenever that might be, that's fine too, but IMO give FRX06 a shot, play around with it and you'll be better informed when FRX07 is released.