Hi guys,
I have bought an Anextek SP-230 PC Phone, and I read that QTEK 2020/XDAII has this little program included in the ROM file.
Considerating that Anextek PDA has already the necessary Registry Keys and I need the Sim Toolkit as I perform serveral banking operations, I would like to know if someone can send it to me, because I tried to dump it from the XDA Rom and from Extended Rom but without luck.
Thanks in advance
Here is the version from my imate (ROM 1.72).
I don't believe that it will work.
I hope there are all relevant files in the zip....
Happy trying...
Stefan
Thank you very much for the attachments.
All the libraries are already present in the PDA; the program launches correctly, however unfortunately I think that the program handles in a wrong way my SIM card driver and is unable to find the services (because it says that "there are no applications installed on your SIM").
However I would like to thank you guys again.
Glad to help. Sorry it does not do what you wanted it to.
FWIW - it does the same thing with my SIM, T-Mobile does not put apps on the SIM.
I'm quite sure that in Vodafone IT 64k SIM cards are present some apps (they also offer the possibility to change the installed services over the internet ). I fear that QTEK/XDAII has a completely different way of handling SIM because also MMS Composer runs perfectly but is unable to detect the contacts (Anextek Sim Manager instead show them correctly)
Im also having an issue on the sim toolkit for my xda2.
My sim has mobile banking installed in it. When the xda2 is fresh from a soft reset, the application on the sim is accessible, but after a while, it tells me that there are no applications installed in my SIM.
Does anyone know how to solve this? I hate to have to reset my xda2 everytime, the sim toolkit tells me that there no applications installed.
Thanks
Hi,
Are you using SpbPocket plus 2.1? It may be this one that's causing your SIM toolkit not to work... just maybe... [/quote]
Hi,
Are you using SpbPocket plus 2.1? It may be this one that's causing your SIM toolkit not to work... just maybe... [/quote]
re:
Yes i am. It could probably be the reason. Is there a work around? But i also noticed that when i use my wife's sim card, it works fine even after a while
Well, I haven't figured out yet a workaround for that. I am not using Spb Pocket Plus now since I noticed it is also slowing down some of my apps...
i found the workaround. I disabled the CLOSE button in SPB pocket plus. Disabling the CLOSE button also solves the unwanted Hard Reset and duplicate sent SMS in my case.
That's great! I'll try to do that...
Related
HI. I´d love to have the s730 HTC home screen on my Vox. Does anybody know where could I get it?
Thx
Ditto that! I also have a 710 and would like the 730 homescreen/theme
Same here
We have tried to use the extracted files posted here earlier but it seems there is bunch of stuff missing...
Any new extraction or guidance would be helpful as well
The file posted here can be extracted : http://forum.xda-developers.com/showpost.php?p=1732690&postcount=4
I've been able to use HTC homescreen on my vox but I can't get some things to work like the favorite people application and the weather part... In fact only the clock works
Unfortunately I don't have time to look further into it, but it shouldn't be too difficult for the geniuses out there
wont spb mobile shell give a similar home screen?
Isn't it only for pocket pcs ?
It´s done.
HTC Home Screen for HTC Vox :
Found in this Forum under HTC Tornado. Works fine on my VOX. Be sure to install to the device!!! when you install it to SD Card Phone crashes at boot.
Thank you very much Gregory for this great theme.
Truplaya
Edit: Seems the phone sometimes crashes when you insert the sd card. without sd card it boots fine... Maybe someone knows why and can fix this error...
Before downloading you have to notice that this cab can cause a crash and you have to hard reset the phone.
Gah. A hard reset is now needed all because of that cab above this post.
Total crash, stuck in reboot cycle.
A warning to others.
(installed to device, not storage card of course)
Update: Seems that the cab did something to the phone's MicroSD support. Or something. I can boot the phone without having the storage card inserted. Any idea what may have been changed? I'm guessing something in the registry, but not sure really.
Same problem to me schlinkey. But i can boot without sd card and insert it when booted. I added a notice above about the problem. Sorry that you had to hardreset your phone.
Did the Plugin worked for you when you boot without sd card?
I can take some screens of my phone (Vox) with HTC Plugin tommorow if wanted.
Took some pictures this morning.
It's alright, a hardreset now and then keeps the phone running smoothly
When I managed to boot the phone (without having the SD inserted) I uninstalled the plugin. The error remained however, so ended up with a hardreset anyway
All working again now!
Got it installed on my Vox now, currently uninstalling look alike themes and stuff that I no longer use to free up space on my phone now. Thanks for getting the New HTC Theme to work on the Vox. Just ned to get weather plugin working now. I've also got an annoying problem where my Vox with my T-Mobile Sim in says that I am Roming and the carrier plugin says thatI am connected to T-Mobile UK. I'm in the UK and using a T-Mobile UK Sim.
Roland
No problem with the Home screen, but I have had the reboot problem with the SD card for ages.
I did manage to get it to boot with the SD card in by doing various things.
When I first had the problem switching to flight mode before a reboot fixed the problem. The after installing some software it would only reboot with the SD card in if I first ran SK tools to clear duplicates in the notification list and selected a home screen which did not access the SD card (including the MRU list) such as "Windows Simple".
When I installed the Office 6.1 update the problem appeard to go away.
Then I installed Facade and so far have not managed to get it to boot with the SD card inserted.
I guess I could uninstall Facade - but I want to use it.
A Hard Reset is too drastic and I don't want to try that - easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
I suspect its a problem with the SD card driver as I have read that later ROM versions fixed the problem.
wizgnome said:
easier to remove the SD card than to spend all day re-installing everything on my phone - no gurantee it will work anyway.
Click to expand...
Click to collapse
Sounds like you need Sprite Backup 6
Gunde said:
Sounds like you need Sprite Backup 6
Click to expand...
Click to collapse
I thought about that - not tried it - I assume it would back up all the registry settings along with the files.
But if I do a restore, I assume it would be back as it was before the hard reset, including the cause of any problem.
Although I suppose it might allow for some experimentation, with the ability to put things back to how they were before any changes were made.
Can someone who has used it give some comments on how useful sprite would be in these circumstances.
Hi all! Has anyone experienced the "My People" application stopping working after a while? After I installed it, it worked shortly, but now when I try to open it, the list flashes quickly, then disappears. This is from both the Home screen, and through the Start Menu. This has happened both times I've installed it. Any ideas?
Thanks!
ssorrell
Just now installed on my S620 Excalibur and seems to work ok.
John
And my home screen ;D
http://www.e650.zafriko.pl/kat/tuning__d
and how quick is you home screen with that smart toolkit and 3d menu ? bacause i got it before and it`s really slow !! I love this HTC 730 homeS .
those are all files wichout 3D menu and work good lake wihout "tuning"
but keylock need lock from pres key profiles/off display and select keylock if u use difrend keys to keylock or methods 3D menu god/off and need run again its bug affter instal smatoolkid ;/
enjoin ;D
*now i use smartoolkit RC.0.0.0.9 and settings:
in general first are all disable wihout run on startup and show's txt... and second row its disable then smartoolkit wen pres home button show and hide
Ps. sorry for my eng;/
i have the HTC 5800 and when i try to install this i get a message about not having sufficient privledges.
Any ideas?
Got my brand new HTC Touch Cruise the other week and it was working great. I then decided to try and Geotag my photos which apparently is as simple as changing a registery value. So off I go and download the trial of Resco Explorer 2007 and reg editor from their website and change HKLM\Software\HTC\Camera\P9 »Enable« to 1
Soft reset the phone and then the phone no longer connects to the network.
(The geotagging feature of the camera worked fine too.....)
I uninstalled the tools, did a hard reset and reloaded the original ROM to no avail - the phone still refuses to connect to the network (Telstra NextG - Australia) which it was working fine with before. I have also noticed that when there is no Sim in the phone the IMEI does not agree with the one on the back and when the Sim is in it says the IMEI is "Not Support"
Any help would be appreciated, I'm missing my new toy already!
Do a Hard reset and your problems should be gone. Easiest way is "Settings > System > Clear Storage > 1234". Remember to sync your contacts before you do it and good luck
I'd already tried a hard reset and loading the latest ROM (Which was the same as the one it shipped with) but that did not work.
Just tried doing it again the way you suggested and it's still broken.
Also on further inspection my IMEI when it doesn't have a SIM in to is almost the same as the one of the back but just has an extra 01 on the end. It still says "Not support" when I have the SIM in it though....
All sorted out.... It seems it was an issue with Telstra(They said they had a brief outage, and for some reason my SIM didn't reconnect to the network until they gave it a "Kick"), not the phone that just happened at the same time as I was editing the registery. Talk about bad luck......
TMBomber said:
All sorted out.... It seems it was an issue with Telstra(They said they had a brief outage, and for some reason my SIM didn't reconnect to the network until they gave it a "Kick"), not the phone that just happened at the same time as I was editing the registery. Talk about bad luck......
Click to expand...
Click to collapse
Yes so next time your Polaris not working so blame always your operator if the device dont connect, The imei cant NEVER chance with a registry chance what ever you do with the device the imei never changes, with that numbers you cant mess with
you said the imei changed when you have the sim card inside and evidently you couldn't connect to the network because of that... so deosn't that implys there's a 'possibility' that bypass the hardware imei by doing something to the sim? we might be on to something here guys..
First post, hi everyone!
In a bit of trouble with my XDA orbit. Im waiting to sell it, but i cant get rid of my contacts. I've taken the SIM out, but all my contacts still show on the phone and wont give me an option to delete. Ive tried downloading some programs on the net that get rid but to no effect.
All my contacts still show, with a little image of what looks like a sim card next to them - but my sim isnt in it!?
Really confused now. Please help!
Cheers
Fil
Well, if I remember correctly the sim contacts are shown even without sim. A good thing before selling the phone would be to hard reset it, which will return the phone to the state it was innitially (and delete all the programs and user settings).
I am trying to get wmwifirouter 1.3 to work on my verizon xv6700 (wm 5). It connects to my data network fine but when i check my wifi it doesnt give me a ip address and wont surf. Is there a setting i am missing. I didnt see anything on their site that would help me
just asking... did you check for compatibility?
yes its compatible
All i can suggest is that you ask Chainfire what to do.
http://forum.xda-developers.com/showpost.php?p=1949360&postcount=644
see? chainfire can solve everything
i will try it when i get home. can i ask whats the reason it will work on the device and not the card.....i mean whats the big difference
The ICS cab installs a service/driver. At the time in the boot process this loads (which is really early) it is possible the SD card driver is not loaded yet (and hence, fail). Also when your system is running it could pose problems if you remove the SD card. It wont crash your system probably but weird things may occur until you reset your device with the SD card inserted. This is normal behavior for services/drivers.
ok... i put the file on my card but i was trying to install it on my device but it didnt give me a option to do that. So question is where did it save and where can i go look for it to see where it installed. I also did a reset and ran the wmwifirouter software and it still didnt connect. Should i also install wmwifirouter on my phone also because right now its installed on my card
so i tried uninstalling wmwifirouter and installing it on my phone alone with the cab file and it still isnt working. is there some settings that needs to be set that its not telling us about
help !!! bump !!!
i notice it says it has to be " Windows Mobile 5 AKU 3.3 " .... what does this have in it that a regular wm5 dont???
hello
im a new member here(old watcher xD), and this is my first post, i would hate to make it about asking for help instead of saying hi but im having this problem/s for a while now and its really getting on my nerves, (please excuse my mistakes since english is not my first language)
here is the story:
i bought at&t locked atrix 2 (GSM), bought unlock code and did long research for the last couple of days about the whole android OS roms (IOS user )
and im using the phone now (unlocked) with our carrier Etisalat and it works great but my problems are as follows:
1- it always connect to 4g which i think is consuming more battery and sometimes the coverage is weak so i wish to turn it to 2g or at least 3g if 2g not possible (tried to change it from settings but the option is grayed and also downloaded apps and widgets and still the same)
2-whenever i reboot the phone or close it and then open it, i get a notification that says: "sim card full, delete messages to free space"(every single time), and i have no messages at all (in the sim and outside the sim) and i only have 52 contacts in the sim, which leads us to my third problem
3- i have contacts in the sim but i cant import them because accoring to the phone "there is no contacts on your sim card", and the funny part is i can access them from the same phone thru an app called SIM Toolkit (not sure but i think it comes embedded inside the sim) but the app does not import them or make me copy them, just watch them and if i want i can write them on paper xD, and also it show that the sim can contain 2000 name
200 email
200 number
all of them are empty except the names field which has 52 name.
by the way those three problems have traveled with me thru the roms xD
stock, supercharged, supercharged v2, stock deoxed, and finally victory(the best ) so i dont think its a problem with the roms.
also i tried to leave the AT&T bloatware but nothing changed.
i hope i can find the solution/s with you guys & sorry for the long paragraph.
Bump
up, perhaps someone would know something useful.
I had the same problem with the phone not reading the contacts on the sim card. What I did was install a free app call Sim Contacts from google play. I selected all the contacts and from the app setting, selected batch operation to "batch copy to phone contacts" However if you reset the data on your phone, it needs to be done again. I hope this help.
Thanks ))
thanks for the help, and i did try to use several programs (yours included)but non worked.
anyway i tried to take the sim and use it on my old nokia phone and after couple tries it finally showed up that there is messages in the sim and i deleted the hell out of them xD and when i returned the sim, the phone never showed up that message again and not only that but it also made the contacts visible to the phone and i could import them and everything worked out )))
however there is still the first problem not solved yet and any help would be truly appreciated ?
why is the choice of changing the network type (4g,3g,2g) greyed out ?
finally solved all the problems
it really saddens me that no one tried to help me except one (has my sincere gratitude) and i finally found a solution to my problem with changing the network type, the sad thing is that no one helped me out (yep im b!#@%ing about it), the good or even funny thing is that i found the solution here in the forums by other XDA members (after 4 hours or searching), and im posting this now because someone else might be needing help regarding this subject:
http://forum.xda-developers.com/showthread.php?t=1103967
thanks XDA
Ne-oL said:
it really saddens me that no one tried to help me except one (has my sincere gratitude) and i finally found a solution to my problem with changing the network type, the sad thing is that no one helped me out (yep im b!#@%ing about it), the good or even funny thing is that i found the solution here in the forums by other XDA members (after 4 hours or searching), and im posting this now because someone else might be needing help regarding this subject:
http://forum.xda-developers.com/showthread.php?t=1103967
thanks XDA
Click to expand...
Click to collapse
You worked it out on your own and found he solution by searching. Good job!!!