Database Info

Desire compatible chargers

Blackberry micro use chargers are all over the place. do any of these work adequately with our phone? Do they supply enough amps/volts?
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk

without having testet this, i'd assume any USB Charger with an output of 5 Volts and 500 mA can do the job. I am using the original Charger, the one from my Sony Ericsson X1 and also a Sanyo Mobile Booster (Portable Battery Charger). They all work well

Charger from the hd2 works fine too! its all becoming very standardised now

Yeah, it's just I heard that certain chargers don't appear to work very well, with some people reporting that their phone has run out of charge when going on long journeys whilst using the phone as satnav - so using cables which employ the correct ampage/voltage could be important.

The micro USB Blackberry charger works fine on my Desire
Andy

I just got a 1 Amp one off ebay for about 3 quid. No complaints from me!

daverave999 said:
I just got a 1 Amp one off ebay for about 3 quid. No complaints from me!
Click to expand...
Click to collapse
Got the link Dave?

i'm using the HTC original charger car charger from my Touch HD, it's 2 amp and charges the phone in no time. Needed to get a mini usb to micro usb adapter from ebay though.
The Blackberry ones seem to be 0.5 amps and take ages to charge.

subharmonic said:
Got the link Dave?
Click to expand...
Click to collapse
Sorry, totally missed this. I just put 'usb charger 1a' into the search. The seller was 'arygroup'. It's not as quick as the one it comes with but it's fast enough!
The phone says it is charging from USB, whereas it doesn't with the proper charger. Not sure why yet...

I received my car holder with car charger a few days ago, it is labeled as a Moto.V8, and should output 1.5 mAh.
I don't know if it geniune Motorola charger or clone, always a surprise with eBay
Haven't tested it yet, all I hope is that it doesn't drain my phone while I'm using GPS navigation.
I've read some stories that certain chargers can charge, but when using GPS applications they will drain.

There are a couple of other posts about the same thing. Lets try and keep it to one thread. Better for updates etc

For those in the UK sainsburys are doing a 1amp car charger for 6 quid.
It includes two usb sockets, and is white.
When plugged into my desire, the phone reports that it is being charged by AC, and sat nav dosent drain the battery (in fact it still charges.)
Fon22

It's not as quick as the one it comes with but it's fast enough!
The phone says it is charging from USB, whereas it doesn't with the proper charger. Not sure why yet...
Click to expand...
Click to collapse
From another thread, it appears that the phone will only draw 500 mA unless the USB data pins are shorted together. A few minutes with a soldering iron and the charger works as well as the HTC one.

If you have any old HTC (Diamond etc) 1A chargers lying around just buy one of the Mini to Micro USB Charger Adapter Converters for 99p including p+p from ebay and use them!

I have run some tests on 500mA chargers and would be interested in hearing how someone else has got on with one (instead of a 1A).
At first I was using a 5 Volts & 500 mA Blackberry charger with a cheap micro USB cable and getting very slow charging. At first I thought this was the 500mA rating but then I got a brand new official Nokia micro USB cable and it seems to charge at a comparable rate to my official charger. I'm at a bit of a loss to explain it other than perhaps the quality of the cable has a lot more effect on charging than I thought (I don't think the data connectors have been shorted on the Nokia cable, I can transfer data fine using it)
-----
Smart Adopter - UK based tech hints, tips, news and reviews
http://smartadopter.wordpress.com

How about this:
http://cgi.ebay.co.uk/Tomtom-4A00-182-5A00-081-A05T2-05MU-USB-Wall-Charger-/310157216511
Seems to be the same output as the standard HTC mains charger..
Would this work ?

What about this one:
Input: AC 100-240V 50/60Hz 100mA
Output: 5V = 150mA
?
My HTC Desire came with UK plug and I cannot use it.

Tesco are doing a cigarette lighter splitter with a USB 5v 1A socket for £4-99.
It'll be getting a trial run down to Le Mans later.

AndyChecker said:
If you have any old HTC (Diamond etc) 1A chargers lying around just buy one of the Mini to Micro USB Charger Adapter Converters for 99p including p+p from ebay and use them!
Click to expand...
Click to collapse
I can confirm this =P. But you DON'T need to buy a new usb cord, just use the cord that comes with the desire and plug it into the Touch diamond Charger
I had the Touch diamond and Im using the touch diamond charger for this phone cuz it LOOKS way better (when i plug it in, HTC lights up ), and it charges almost twice as fast (Difference is very noticeable)

I was manically driving around to find a car charger, and EVENTUALLY found one at a Vodacom shop(in South Africa). It was made by Body Glove, and it's a 360 rotating device, with a USB port on it. The Micro USB cable that came with it is retractable, but I haven't used it. I used the cable that came with my phone. Will test it later. I drove about 200 plus miles with it, and my charge was good after the trip. My phone is still less than a week old, so the battery charge hasn't quite gotten to where it should be. Cost me about R99 (About $12)
By the way, the Micro USB connector will supposedly be the only connector on phones by 2012. It has apparently been standardized, so that people will just get a phone, but that all chargers will work on all phones. Too much waste from old chargers they say.

Car charger?

Does anyone know of a good car charger will not effect the battery of the phone or does rapid charging? Is there one with a voltage regulator so its like charging from a wall outlet?
Also I was thinking about getting a AC car adapter, and just plug in my wall charger that came with the G2.
What do you guys think?

Look on Amazon for a Motorola micro USB charger. It's like $1.50 with free shipping. They accidentally sent me two of them. Works just fine.
Sent from my T-Mobile G2 using XDA App

I actually use my original G1 charger with a Mini USB -> Micro USB adapter that I bought for $1 shipped from hong kong on eBay, I ordered 5 of them for $5 and they sent me 10 of them on accident... I'm not complaining, now I can use all of my old mini USB cables for the PC as well

I've been looking for car chargers that output 1A.
So far have seen the belkin charger usb port/no cable $10 ebay and radioshack 1.2A corded charger $28.

I can't for the life of me find it sold separately anywhere, but the car charger that came with the N1 car dock works great. Even HTC doesn't have it on their site (that I can find). All they have now is USB car chargers to use with the data cable.

I am new so I can't link to it... but if you go to slickdeals dot net then on the front page there is a deal for the Motorola P513 rapid rate charger on Amazon.
I just jumped on this. Lots of good reviews from incredible, evo, and n1 owners even when using navigation. And it's $5.

smthkat789 said:
I've been looking for car chargers that output 1A.
So far have seen the belkin charger usb port/no cable $10 ebay and radioshack 1.2A corded charger $28.
Click to expand...
Click to collapse
If you have a frys electronics near you pick up one of these http://www.frys.com/product/5865763 or order online. Works great is outputs 1A. I refused to pay T-mobile 29.99 for a charger.

has anyone got one on ebay the cheap ones (are they good or keep away from them).
if no good what ones are good

I'm also on the market for a good car charger that will not screw up my phone. Came close to buying the cheapos on Ebay but like the previous poster didn't pull the trigger since I was worried one of those might damage my phone. Any recommendations would be appreciated (or feel free to second the ones that are already listed). It's definitely a necessity since I'll be using this as my primary GPS from now on in my car.

Tell us more about these car chargers that ruin batteries.
Sent from my T-Mobile G2 using XDA App

HTC-Vision-G2-Newb said:
I'm also on the market for a good car charger that will not screw up my phone. Came close to buying the cheapos on Ebay but like the previous poster didn't pull the trigger since I was worried one of those might damage my phone. Any recommendations would be appreciated (or feel free to second the ones that are already listed). It's definitely a necessity since I'll be using this as my primary GPS from now on in my car.
Click to expand...
Click to collapse
just received this http://www.amazon.com/gp/offer-list...moFilter=1&sort=sip&me=&seller=&condition=all in retail package. dont buy unless from amazon. I heared some seller like OEM shop doesnt send you in retail packaging.
from slickdeals http://slickdeals.net/forums/showthread.php?sduid=593823&t=2300969

funkeee said:
Tell us more about these car chargers that ruin batteries.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Yes, as I am searching for one, would like to know wich ones not to buy!

I got the HTC CC C300, definitely not cheap, but has 2 usb ports whit 1A in both of em, and looks sleek.
Includes one micro usb cable, only power, doesn't work as data cable.

carlosdionisio said:
Yes, as I am searching for one, would like to know wich ones not to buy!
Click to expand...
Click to collapse
Pay attention to how many amps the charger supplies. The OEM wall charger puts out 1A (1000 ma). It charges at a pretty good clip up to about 90%, to get the battery 'full' will take some extra time...
I bought this Motorola Charger, as mentioned earlier in this thread, and it was worked very well for me. It is rated to put out 950 ma, so just short of the wall charger.
http://www.amazon.com/gp/product/B000S5Q9CA

gbarayah said:
Pay attention to how many amps the charger supplies. The OEM wall charger puts out 1A (1000 ma). It charges at a pretty good clip up to about 90%, to get the battery 'full' will take some extra time...
I bought this Motorola Charger, as mentioned earlier in this thread, and it was worked very well for me. It is rated to put out 950 ma, so just short of the wall charger.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
Just so people know, the highest charging current I have ever seen my G2 take is about 771 mA. This data was taken with Battery Monitor Widget. So I don't think it makes any difference if the charger provides 800 mA or 1.0 A.

I got a full kit of an unopened Belkin chargers for iPod/iPhone for 6 bucks at a goodwill and used the car-usb charger and a micro-usb data cable to charge my phone. The charger is really reliable. I've been using it for my G1 for one year and G2 for half a year and there was never any drop in batter performance.
I always thought the cables didn't matter that much, but the charger is the key to ruining the battery.
As to the amps and voltage: On the back of my battery it's labelled 3.7V 1300mA, and on the phone it's 5V 1A. I doubt it's those 1 buck charger is really gonna have a good grip on those values.

I've been very happy with the Dexim dual-USB charger. It plugs into the 12V socket and can output 2 amps (or 1 amp on both ports simultaneously). I bought the iPhone version for the special cable. Other smartphones can use any regular mini or micro USB cable. Great for charging up two devices at once, and it can provide enough current for devices like the iPad.
http://www.dexim.net/us/products/car/DCA154.html
I see they have a version that will kick out 3.1A (!), although I don't think the DZ will take more than about 650-700 mA anyway. It would be nice if someone tweaked the phone's USB firmware or driver to accept a higher current...

alternative to the hp charging cable

I lost my wall charger that came with my HP touchpad. The round plug thingie is what I'm looking for. Searching on Amazon brings up a number of items, for example:
http://www.amazon.com/HP-North-American-Charger-TouchPad/dp/B0055QYJJM/ref=dp_cp_ob_e_title_3
However, is there an alternative that works? I was able to use the Evo cable rather than the original HP sync/charge cable that came with the wall charger, but is there an alternative wall plug that works as well? Paying almost $28 for a charging cable seems a bit ridiculous.
Any help and advice would be most appreciated.
[[FOUND MY ANSWER]]
I found that Walmart was having a sale on the North American charger with the barrel wall connector for $11.99 and Meritline was having a sale for 6' long USB to micro-usb cables (pair for $4.99 no tax/shipping).
The listing on the Meritline page says that the cables are compatible with the Evo.
Given that the cable that comes with the HP barrel charger is pretty much monkey spit and fails within a month, I found a solution that works for less than $20.
Links are below:
Walmart HP Touchpad charger
http://www.walmart.com/ip/HP-TouchPad-Accessory-Travel-AC-Wall-Adapter-Charger/16641536
Meritline Cables (use this code MLCK222YNL1 for discount (cannot guarantee how long this code is good for, drops the price for a twin pack of the 6' cables from $10.99 to $4.99)
http://www.meritline.com/showproduc...e=6-feet-high-speed-micro-hdmi-cable-ethernet

Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.

dmarchant said:
Pretty much any USB charger will work, but most give a notification on the Touchpad screen indicating that they may not be charging. This is because the official charger is at the high end of both voltage and current capability. I charge from laptop, desktop and a variety of Blackberry chargers with no issue, but the available current will determine how long it takes to charge and whether it charges much while the screen is on. Go for a USB charger that gives you 2 Amps and you should be fine.
Click to expand...
Click to collapse
Thank you for the advice. To be more specific, can you recommend any alternative charging cables/wall charger units specifically?

Any brand name USB charger that gives off 2 amps should be fine. I tend to stay away from really cheap generic chargers. Any microUSB cable should be fine even a generic one if it has decent reviews. I worry about generic chargers since a poorly regulated one could send a voltage too high, but generic cables should be fine.

The chargers I am currently using, as well as the one that came with the TP, are the one that came with a Blackberry Playbook and the one from my HTC Desire HD.
The Blackberry charger gives an error on the screen that it may not charge the TP, but as it gives 2 amps, charges in pretty much the same time as the official unit.
The HTC again gives the warning and takes about twice as long to charge.

what about the nook color charger i know it higher amps might work as well

cesar2010 said:
what about the nook color charger i know it higher amps might work as well
Click to expand...
Click to collapse
I just tested the TP with a charger for the NC, and unfortunately, it still gives the same "may not charge" warning...

There is NO after market charger that will charge at full rate like the HP barrel charger!
At best they will trickle charge at a much lower rate and take considerably longer to charge.
The TP relies on precise signaling which it will only get from the OEM item or specially modded after market units or cables.
Do a google for further info ie webosnation.com forums.

I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.

Izeltokatl said:
I think your looking for a 5.1v charger, aka rapid charger. This is used by the iPad, and some android phones like the Motorola droid 3, razr and htc rezound.
I could be wrong though,I haven't gotten my touchpad yet.but I do own all said device above (except the razr) and they all use the faster charging technology.
Sent from my rezound.
Click to expand...
Click to collapse
They will not work at full rate!

No one else uses 5.2 volts
Sent from my Samsung Galaxy S2

Don't believe all the hype about using ONLY the HP charger, there are many that do the job perfectly well. Too many people make these authoritarian statements and all they do is cause FUD.
At my office, I use the AC charger from my last Samsung phone (mythic) and it works IDENTICALLY to the OEM one. I have also used a Moto and and LG with NO PROBLEMS. I have no issues getting to fully charged in little time.
At home, my OEM cable is plugged into a high-power USB port (2.1A, I believe) and it has no problem charging from near zero to full as well. Front or top-mounted USB ports tend to be 500mA or less, but the rear ones (coming directly off the motherboard) tend to have a higher supply. I also use a non-HP USB cable occasionally and it works fine.
(I got my TP during the original fire-sale and have been charging it these ways ever since with ZERO ISSUES.)

R1ptide said:
No one else uses 5.2 volts
Sent from my Samsung Galaxy S2
Click to expand...
Click to collapse
The small voltage difference is marginal and isn't going to matter, the internal hardware should be able to tolerate a few tenths of a volt difference. In fact, I tested my Motorola charger rated at 5.1v and the Touchpad charger rated at 5.2v on a multimeter. The Motorola charger was outputting 5.20v and the Touchpad charger 5.16v. Granted this is at no load, but switching transformers are regulated so they should supply rated voltage at any current draw equal to or less than rated. Also depending on how well the voltage is regulated there may still be a slight AC ripple that the device has to deal with.

Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..

sirclesam said:
Does anyone know the time difference between using the TP charger and a standard droid/blackberry charger? Also curious if the charges last the same. I know theoretically they should since the battery is full either way, but electricals can be tricksiy..
Click to expand...
Click to collapse
Its all down to the charge rate that the TP is able to draw.
2A which is theoretically possible from TP AC barrel charger would charge the 6A+ battery of the TP from flat to full in approximately 6.5 hours.
If the BB charger were able to have 500mA drawn by the TP then it would fully charge in approximately 26 hours.
The charges would be no different.

To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.

stuart_f said:
To convert any regular USB charger into a TouchPad charger you need to add 2 resistors as per the diagram attached.
The presence of the resistors will trigger the TouchPad to draw the full 2A from the charger rather than the trickle charge it does when they are not there.
Please do not modify a cheap charger that is only rated for 500mA as you will most likely overheat it and it could present a fire risk.
Click to expand...
Click to collapse
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.

pa49 said:
Just pointing out that you need to start with a charger that is rated at least 2Ah to start with.
You can't turn a low rated one into a high rated one.
Click to expand...
Click to collapse
oh, for the love of gods. REALLY? I was just asking for a replacement cable. I don't want to reinvent the charging paradigm. I just need a simple recommendation for a cable. If a thread could be highjacked any further I don't know how it could be.
I appreciate all your "advice" but seriously, this is NOT what I was asking.

Anyone know if I can get a similar cable in the UK? Kind of lost my TP cable, and I miss the flexibility the long cable gave me, it was so much easier to use on charge!

well i know that my tbolt cable works. i have to use the tp adapter though. my tbolt adapter makes the touchpad say that the charger is incompatible.

Nexus 4 car charger??

Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.

aldenh said:
Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.
Click to expand...
Click to collapse
You dont have to have a modded cable if your car charger already has the data pins shorted. Im using the motorola rapid charger too and it works fine, it will charge your phone as AC and give enough power to recharge the battery with navigation on. if you want something a bit better you can try this one , they ship to canada. My rapid charger broke so i bought it a few days ago. Reviews says the trident will give around 8-900mA, the moto charger outputs around 6-700mA.

I would only buy a premium brand here. If you see how no name mains adaptors are made... the risk of blowing up something expensive is just too big.
I wnent with the Sony AN-400 / 401, because it is rated at 1.2 amps exactly, is small, and was reported to work fine.
For some regulator disasters:
http://hackaday.com/2012/08/15/buying-cheaper-electronics-and-not-saving-money/ <- a USB car charger without components, putting 12 volts straight on USB.
http://www.youtube.com/watch?v=wi-b9k-0KfE <- teardown of imitation apple mains adapter, showing no output protection and very little gap between mains voltage and output circuit. Good info, but style of presentation is not my cup of tea.
So that is why I went with a premium brand.

that's one charger from one factory that some guy that didnt know what he was doing and ordered thousands, without testing them. He probably went for the 25 cent super deluxe model...
Well reviewed chargers from xda members here and not to mention the hundreds of people on amazon are a safe bet. Here's a 8+page thread on the charger i linked. Your premium brand name sony charger is made in china too.

aldenh said:
Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.
Click to expand...
Click to collapse
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!

neotekz said:
that's one charger from one factory that some guy that didnt know what he was doing and ordered thousands, without testing them. He probably went for the 25 cent super deluxe model...
Well reviewed chargers from xda members here and not to mention the hundreds of people on amazon are a safe bet. Here's a 8+page thread on the charger i linked. Your premium brand name sony charger is made in china too.
Click to expand...
Click to collapse
Thanks so much for the link.So is this Trident limited charger same as the Powergen dual usb??I mean is the quality ok???this charger has the data pins shorted and comes with a regular micro usb cable?

M3Rocket said:
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!
Click to expand...
Click to collapse
That looks ok,but I cant find a good quality usb charge only cable that ships to canada :

I have a el cheapo usb charger from ebay and I used my usb cable that came with the phone...and when i pluged it in it switches from AC charge to USB ever couple of seconds back and forth...so I want to try something different.

If you're into rooting and custom kernels, most of them have a fastcharge option where you don't need to have a special usb cable, or, attempt to short the D- and D+ lines.
Monoprice has a 2.1A bullet charger for a bit cheaper:
http://www.monoprice.com/products/p...=10826&cs_id=1082603&p_id=8858&seq=1&format=2

aldenh said:
Thanks so much for the link.So is this Trident limited charger same as the Powergen dual usb??I mean is the quality ok???this charger has the data pins shorted and comes with a regular micro usb cable?
Click to expand...
Click to collapse
i cant say for sure until i get it sometime next week but i think so. im in canada too and couldnt find the powergen anywhere that would ship here.
There are some other brands that are good too but i like this one cause it's dual usb like my old moto rapid charger. If you dont need that you can get some smaller ones that will work just make sure they are well review and can output around 1A. The one that bfspider spider recommends is a good bet too since monoprice is pretty reputable store and will ship to canada.
aldenh said:
I have a el cheapo usb charger from ebay and I used my usb cable that came with the phone...and when i pluged it in it switches from AC charge to USB ever couple of seconds back and forth...so I want to try something different.
Click to expand...
Click to collapse
You can try to mod this one in the mean time, just take it apart and attach the two data pins(they are the two middle ones). Solder is best but if you cant you can just use pilers and bend the pins until they touch. i did this with a few of my chargers too and it works to make them AC but it wont increase the output if its low to begin with.

neotekz said:
i cant say for sure until i get it sometime next week but i think so. im in canada too and couldnt find the powergen anywhere that would ship here.
There are some other brands that are good too but i like this one cause it's dual usb like my old moto rapid charger. If you dont need that you can get some smaller ones that will work just make sure they are well review and can output around 1A. The one that bfspider spider recommends is a good bet too since monoprice is pretty reputable store and will ship to canada.
Click to expand...
Click to collapse
Once again thank you so much.I found the Trident charger here with free shiping to USA and Canada and good reviews

I just bought a "Samsung Car Adapter" with this output: 5V 1A
Is this a good CAR adapter for Nexus 4?
The Nexus 4 "LG travel charger", has this Output: 5V 1.2A
I wan't to use this Samsung Car Adapter while using GPS on the Car or playing games on the Car without lowering the battery.

thesebastian said:
I just bought a "Samsung Car Adapter" with this output: 5V 1A
Is this a good CAR adapter for Nexus 4?
The Nexus 4 "LG travel charger", has this Output: 5V 1.2A
I wan't to use this Samsung Car Adapter while using GPS on the Car or playing games on the Car without lowering the battery.
Click to expand...
Click to collapse
I have the same. Works perfect
Sent from my sexy Nexus 4

M3Rocket said:
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!
Click to expand...
Click to collapse
FYI, this adapter should allow most existing "iPad" chargers (1.2A or higher) + any USB cable to work well with the Nexus 4.
The problem is that Apple products deviate from USB charging standards. As a result, most chargers try to be compatible with iDevices and also deviate from the standards. So when standard-compliant devices try to follow the standards, the chargers refuse to follow the standards, and the devices get upset with each other. Fortunately, they fall back and settle on a lower-power charging rate.
If you want to buy chargers that are very clear on what they support, check out MediaBridge (also available on Amazon).

Why does a bog standard USB cable work in the car for me? Using a proper off-line sat nav my phone was fully charged

neotekz said:
You dont have to have a modded cable if your car charger already has the data pins shorted. Im using the motorola rapid charger too and it works fine, it will charge your phone as AC and give enough power to recharge the battery with navigation on. if you want something a bit better you can try this one , they ship to canada. My rapid charger broke so i bought it a few days ago. Reviews says the trident will give around 8-900mA, the moto charger outputs around 6-700mA.
Click to expand...
Click to collapse
So i got that Trident charger that you recommended....the quality looks good...but when I tried it in the 1A and 2A port with the usb cable that comes with it,it shows USB charging but when I use the HTC usb cable that came with my HTC one S it shows AC charging....its so confusing and I just dont get it....that HTC cable is a sync and charge cable.

The generic T-Mobile car charger available at T-Mobile stores charges just fine. I believe it is at least 1 amp. Its black, has a purple white small led indicator when charging. The USB end looks like a little block and the cord is an accordion type and it also has a a female USB slot in it to plug something else in at the same time but I believe whatever USB cord you plug in there only charges at .5 amp. With this charger I can run navigation and Bluetooth and Pandora and message at the same time and it will charge.
Sent from my often RMA'd Nexus 4, So that I can use the one I'm using now when I get the 6th and hopefully final one.

I just dont get it why does it with one cable show USB charging and with the other HTC cable AC charging?:S
Sent from my Nexus 4 using xda app-developers app

You're awesome.

Vitamin_D said:
You're awesome.
Click to expand...
Click to collapse
????

Seeking Recommendation for Power Delivery Car Charger

Seeking recommendations for a USB Power Delivery car charger (for rapid charging). Ideally I would like something that's low profile so my console door can close over it when not in use

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/173036242115
I have this. Nice to have a QC3.0 & PD3.0 USB options on the same charger. Meagoes car charger model CC003
No wires included tho

feeway730 said:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/173036242115
I have this. Nice to have a QC3.0 & PD3.0 USB options on the same charger. Meagoes car charger model CC003
No wires included tho
Click to expand...
Click to collapse
No wires included is just what I was looking for! I have so dang many - Thank you!!!

I'm curious if anyone has used any of these chargers for the Essential phone. I'm probably gonna grab the second one I link below and will test with my usb-c power meter and report back when I have time but if anyone else has direct experience I'd love to hear it.
This one looks a lot like what we need but it oddly states "not compatible with Essential" though there are reviews stating it does and does not work
https://smile.amazon.com/Nekteck-Ce...coding=UTF8&psc=1&refRID=RH73X9QDHJD8QPDN6DHG
This one has a little more power than the previous and does state that it works with essential though it claims that the PH1 negotiates via the 12V rail instead of the 9V meaning it is pulling less than 3Amps and therefore flags on the lockscreen as "charging slowly" even though it does charge fast.
https://smile.amazon.com/Nekteck-Ce...coding=UTF8&psc=1&refRID=RH73X9QDHJD8QPDN6DHG
This one is a nice looking wall charger but also oddly states not compatible even though it has the right specifications.
https://smile.amazon.com/Nekteck-Ce...coding=UTF8&psc=1&refRID=RH73X9QDHJD8QPDN6DHG
This one is wildly overkill for the PH1 and also states it has the same 12V rail thing as charger 2
https://smile.amazon.com/gp/product/B0721KG2Q7/ref=?ie=UTF8&m=A3GMRWNJ2V9TRM
This one has a built in cable but also states the same 12V rail bug
https://smile.amazon.com/gp/product/B0719KV9PH/ref=?ie=UTF8&m=A3GMRWNJ2V9TRM

So update...
I bought these two chargers off amazon, buy the car charger and the other charger is 50% off.
Both show charging rapidly when connected to the Essential phone so whatever mistake there used to be with it selecting the wrong rail or it not being reported correctly seems to not be an issue on oreo 8.1. I tested both with my usb-c meter and they seemed to provide something between 5 and 9 volts and anywhere from around 1 to 2.6 amps depending on charge level of the phone at the time.
Over all these seem like solid chargers and they are USB-IF certified so in theory the manufacturer isn't playing fast and loose with the charging specs like some do.
https://smile.amazon.com/Nekteck-Ce...coding=UTF8&psc=1&refRID=RH73X9QDHJD8QPDN6DHG
https://smile.amazon.com/Nekteck-Ce...coding=UTF8&psc=1&refRID=RH73X9QDHJD8QPDN6DHG

looks like monoprice is in the game now:
https://www.ebay.com/itm/27W-Car-Charger-with-USB-C-and-1A-USB-A-Ports/391954642515
weak usb-a, but usb-c supports [email protected]=27w

I bought this one
https://smile.amazon.com/gp/product/B079MWXSS8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
27W on Power Delivery and ~10W on USB-A
Has 45 day money back and 2 year warranty.
It costs more than the others, but I've never had an Aukey charger go south.

I got a https://www.amazon.com/Trianium-Charge-Charger-Samsung-Nintendo/dp/B01LXY0ECN . It has QC3.0 and PD. Works very well for me. Not the cheapest and it's one of the few which works very reliably after trying out more than 5 such chargers. Some don't supply enough power, some says they are PD but yet charges slowly. Only this one really worked for me. It's almost $20 but worth it for me