Hello thread, I has hoping you could help me with my particular problem. I purchased a freed Htc touch HD phone from Movistar, i applied a Hard Spl and flashed a new rom aka leo rom.
My problem is that i still receive the Movistar startup logo before anything else, and then it become pixely and continues the boot, but again pixely, the only way to correct the screens is to turn off and on the screen, then its perfect.
1) Why does the pixel problem happen? even after hard reset
2) Why does the Movistar logo still appear, and how can i remove it or change it to a factory htc startup?
Please help! My sincere thanks in advance.
I seem to have a similar problem! can anybody help?
Update
I searched for a while and found out how to flash a different startup screen by using blackstoneRRUwrapper, worked like a charm.
But i still have a problem a few seconds after start up the screen become weird, the colors go crazy and it will go on this way until i just tap the screen off button, and turn the screen back on and it works fine, this is very bothersome. I would like to have a clean boot.
Please if anybody can help me with this issue,
thank you
Related
Dear All,
I have installed buttonflo on my softbank X01HT and it hanged at the splash screen after i rebooted. Please can somebody help me!!
nelsonong said:
Dear All,
I have installed buttonflo on my softbank X01HT and it hanged at the splash screen after i rebooted. Please can somebody help me!!
Click to expand...
Click to collapse
If you're not able to get past the splash screen, the hard re-set is made by pushing the comm mgr. , volce record button at the same time. Stick stylus in re-set hole on side of phone, phone should change colors with message on screen to send back to mfg. settings. Push the green hardware phone button. Device should come back on shortly after you do this. All data that was stored in your internal memory will be lost. If somehow you do get to the today screen without a hard re-set, go to the start-up folder in windows and remove (delete) Buttonflo from there.
8125
2.25.11.1
I go to flash a rom on my phone, and after the restart, the phone will hang at the 'touch pro' splash, where the rom info, in red, comes up on the bottom. The rom instructions specifically stated that it would hang for a minute, but i have left it there for e a while, and to no avail. I have restarted again, and once again, to no avail. Help?
Have you tried taking your battery out and back in? That has fixed this for me in the past (on two HTC devices, in fact).
i did, and it dont work. please dont tell me i ***ed my phone.
I am also having the exact same problem tried soft and hard reset but no luck till now.
Hey guys.
i started hacking and tweaking my touch pro. and all went well until i soft-reset. the fone turns on but it gets stuck on the HTC animation screen and dosent do anything from there. it just halts. is there anything i can do? without hard-reset because i had loads if stuff on my device memory.
any ideas?
Thanks In Advance
wuchacarlsee.
give a detailed description of the "hacks and tweaks" that you did. That might help us help you.
btw, do not hold anything back. say exactly what you did. you changed "registry value from "a" to "b", you use program Z to tweak aspect G of the phone, etc etc. and also provide your phone information: Series (fuze, sprint touch pro, raphael, etc), ROM (WM6.1 stock, NRG ROM "photon", etc etc), and radio protocol.
Try doing a hard reset (Vol Down+Enter+Reset for more than a few seconds).
If nothing else works then hard reset is the only option
Hi,
I've flashed my phone (HTC Touch Pro) with Hardspl and then the latest Energy ROM.
Everything went perfectly and I was impressesd with how simple and easy it was and how much difference the ROM made to the phone.
Today, while using the camera, the screen went blank.
I tryed turning the phone off, pulling battery and a hard reset but its still the same.
Even after hard reset, the screen is blank but if i press the power button, on the second press, I get a flash of whats on the screen and then it goes blank again.
Should I try to reflash the phone again?
I've searched but not found the same issue
Thanks
The touch screen is still working and sometimes i can see the display, but its very dark and hard to read. Is the flex cable that needs changing?
Why would it stop working so suddenly?
Should i take it apart to reseat it?
Ok, I've found the same issue in a few other peoples phones but they seem to have beeen resolved by sendin the phone back under warantee.
I dont have that option unfortunatly so need to find a fix.
The only thing wrong with the phone is the screen backlight that suddenly failed
Can anyone help me or point me in the right direction please? I cant find a definite diagnosis anywhere
New Flex cable?
New Screen?
Pray?
Thanks
Back to stock SPL and stock ROM
Still no luck
Hello, I've been running MOAR 6.1 for few days and since yesturday when i tried to shut the screen to off mode the screen won't close and the power off reboot screen appears, it also turns on and off few times on it's own and it interrups with the popup of power off reboot screen continously, i thought maybe it was the rom so i changed to different rom but it wasn't the rom. i'm kinda puzzled and i just can't get this problem solved. anyone with similar issues or someone who knows what this issue is please help.. it's driving me crazy everytime i try to use the phone.