Database Info

[Review] DevDef HTC Desire HD Full Body Protection (with pics)

I got my Desire HD just yesterday and before I make the big switch from my trusty G1 and wanted to install this protection that I have had for a good few weeks now.
The full body protector set I got consisted of one for the screen, a main back part, sim card slot and battery slot. It came with a spare set too.
To be honest, I'll cut to the chase. The installation was like any other full body installation in that you've got to keep your hands wet with the sopy solution (I had a spray bottle left over from a Bodyguardz set I had for my HD2 I once had). You must ensure you peel the parts off carefully making sure you don't stretch them. Bearing this in mind and being experienced in fitting this type of protection, I found the 'cut' of it to be poor.
The protection isn't "full" in my opinion. It doesn't stretch round the edges and corners therefore the most vulnerable areas to scratches and knocks is not protected. But worst of all, the deal breaker for me, was the battery cover area. I first realised that the main back part wasn't going to fit correctly when trying to put it on. The design of the protection have wrongly measured the battery cover slot and they believe it to be smaller than it is. This means that I had to cut a little bit away from the main back part. Consequently, the little piece of protector that goes on to the battery cover was too short and again means it does not provide "full" protection. The screen protection, I would of hoped, could of covered the whole thing right up to the earpiece grill but it just covers the screen.
Whether or not the screen will be less responsive, it tints yellow after time or shows any other aspect of poor build quality, time shall tell and I will edit this review accordingly.
So it is in my opinion to wait for another brand to release, InvisbleShield is in my sights as soon as its available.
Any questions, Ill be more than happy to answer

Thanks for the review but it'd me much better If you could share the front screen as well.
BTW you can purchase bestskinsever (BSE) DIY size and cut out any shaped as you need. Especially for that battery cover, you can solve yhe problem with BSE

eozen81 said:
Thanks for the review but it'd me much better If you could share the front screen as well.
BTW you can purchase bestskinsever (BSE) DIY size and cut out any shaped as you need. Especially for that battery cover, you can solve yhe problem with BSE
Click to expand...
Click to collapse
Hi there, sorry yeah I'll upload a pic of the screen tonight. Kinda rushed the review earlier today just before work!
Thanks for the tip about Bestskinever though I think Im going to wait for Invisibleshield or hope that Bodyguardz produce one soon. I really like that for my old HD2

I bought mine, arrived today, it was awful, do not buy, it's stupid. I scrunched it up, do you want a picture of that? £10 down the drain.........oh well, it happens. =D

Zagg Invisible shield
I believe the Zagg invisible shield is already available. when you go to the Zagg web site, just search for HTC desire HD, and it should bring you to the site. I just ordered Maximum protection for AUS $18 (including shipping), but that's after 50% voucher. You can look for it here, and maybe post a request (im sure someone will be nice enough to share.) http://forum.xda-developers.com/showthread.php?t=664386
I do believe the Zagg quality is better (including the cut).

Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Thank you for contacting ZAGG, where we are zealous about great gadgets! My name is Dez G and I appreciate the opportunity to assist you.
We ship to most places all over the world, I see no reason why we would have a problem shipping to your area. You can find a list of local re-sellers in your area via the following link. My best suggestion is to contact these re-sellers for prices. Please note that we can not offer refunds on ZAGG purchases made outside of our website but if you need any of your items replaced under the lifetime, or 1 year replacement warranty we would be happy to assist you.
Click to expand...
Click to collapse

cd993 said:
I got my Desire HD just yesterday and before I make the big switch from my trusty G1 and wanted to install this protection that I have had for a good few weeks now.
The full body protector set I got consisted of one for the screen, a main back part, sim card slot and battery slot. It came with a spare set too.
To be honest, I'll cut to the chase. The installation was like any other full body installation in that you've got to keep your hands wet with the sopy solution (I had a spray bottle left over from a Bodyguardz set I had for my HD2 I once had). You must ensure you peel the parts off carefully making sure you don't stretch them. Bearing this in mind and being experienced in fitting this type of protection, I found the 'cut' of it to be poor.
The protection isn't "full" in my opinion. It doesn't stretch round the edges and corners therefore the most vulnerable areas to scratches and knocks is not protected. But worst of all, the deal breaker for me, was the battery cover area. I first realised that the main back part wasn't going to fit correctly when trying to put it on. The design of the protection have wrongly measured the battery cover slot and they believe it to be smaller than it is. This means that I had to cut a little bit away from the main back part. Consequently, the little piece of protector that goes on to the battery cover was too short and again means it does not provide "full" protection. The screen protection, I would of hoped, could of covered the whole thing right up to the earpiece grill but it just covers the screen.
Whether or not the screen will be less responsive, it tints yellow after time or shows any other aspect of poor build quality, time shall tell and I will edit this review accordingly.
So it is in my opinion to wait for another brand to release, InvisbleShield is in my sights as soon as its available.
Any questions, Ill be more than happy to answer
Click to expand...
Click to collapse
It really looks bad.

Ethania said:
It really looks bad.
Click to expand...
Click to collapse
It is
I only installed it to have some form of protection without covering the phone. Hoping Invisibleshields attempt will be better, probs will buy one soon!
Edit: Ive just emailed them asking how much protection their best product offers. Heres hoping thatit covers the phone entirely, edges included!

LeviathanPT said:
Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Click to expand...
Click to collapse
If they make it like their iPhone 4 full body protection - don't bother . The size is wrong by 1-2mm, the cuts for the speaker, button, etc, also don't match the actual size (see the attached picture). I installed just the front and back protectors on my wife's iPhone, because seeing how wrong they are on the plain flat surface, I don't want to know what they did with the curvy edges... I ordered some original HTC protectors for my DHD because IMO they are the perfect cut and with some luck I'll manage to install one of them without any bubles (it's not impossible - I did it on the Touch HD).

LeviathanPT said:
Ive contacted ZAGG about suppliers in Europe and this is what they answered me
Click to expand...
Click to collapse
Why cant you just ordered directly from their official sites? dont need to go through their resellers. Dont think it's much cheaper to get from their local resellers. Considering you can also get discount vouchers from nice people in this forum. Shipping is not expensive (only cost me $5).

Stupid me! I bought 2 pairs before you! I got my phone about two weeks now, so I decided to have some temporary protection until something better comes out.
And after installing the first one I really felt like I was fooled its so ugly and it doesnt fit well so I decided to sent the 2nd one back the morning after... but too late my mom had already throwed the 2nd one in the recycling bin...
Now Im searching for a cheap but good quality silicone case and a cheap look a like the default HTC leather case, cause I think Ive spent enough on screen protectors!
btw my phone has still the devdef protection on it and I have to admit, it has 2 pros
* No sign of condense
* Stretchy protector
but its 100% NOT scratch proof

anoniem said:
Stupid me! I bought 2 pairs before you! I got my phone about two weeks now, so I decided to have some temporary protection until something better comes out.
And after installing the first one I really felt like I was fooled its so ugly and it doesnt fit well so I decided to sent the 2nd one back the morning after... but too late my mom had already throwed the 2nd one in the recycling bin...
Now Im searching for a cheap but good quality silicone case and a cheap look a like the default HTC leather case, cause I think Ive spent enough on screen protectors!
btw my phone has still the devdef protection on it and I have to admit, it has 2 pros
* No sign of condense
* Stretchy protector
but its 100% NOT scratch proof
Click to expand...
Click to collapse
I hate silicone cover more than anything, but try this mate, only £2.95, but I promise that this is the best protection out for the Desire HD so far, await the case-mate barely there if you want a metal, as I am doing, I got conned by this stupid DevDef protection!

Accessories

This is a placeholder thread for 7 Pro / Sprint Arrive!

svetius said:
This is a placeholder thread for 7 Pro / Sprint Arrive!
Click to expand...
Click to collapse
Sprint has hard cases for Arrive in stores now, ready for the 20th. I got to take a look at it but didn't get a price.

They have the holsters and shell style cases think the shell is just the gel though. I like the holster its not bulky but seems it may fall out easy cuz it don't have a front fascia plate.
Sent from my Hero using XDA App

Are you talking about the case that has the wood grain finish on the back.....anyone try it yet?

awrnsmn said:
Are you talking about the case that has the wood grain finish on the back.....anyone try it yet?
Click to expand...
Click to collapse
My wife tried it in the store, it is not bad actually. Not too bulky, looks kind of fancy.
But I really just want a good screen protector, my sprint store had none.

Ya, I don't like that their screen protectors only cover the viewing part of the screen, not the entire glass front.....I'm going to look into phantomSkins and see if they have them yet. Thanks for the info.

I remember that there were none screen protectors for 7 PRO in february (so i think that i will not buy it now) but i remember that i found some official HTC shop, saying that it will be aviable in march. Original screen protectors, go & buy them

AdamiX said:
I remember that there were none screen protectors for 7 PRO in february (so i think that i will not buy it now) but i remember that i found some official HTC shop, saying that it will be aviable in march. Original screen protectors, go & buy them
Click to expand...
Click to collapse
Doesn't the Arrive use Gorilla Glass or whatever the EVO uses? If so, then no need for a screen protector. My EVO has been in my jean pocket since I got it last June with zero scratches or marks.
Ceger

Just in case anyone is interested. The screen protector for the Shift matches the screen size for the 7 Pro perfectly. I bought a set in a Sprint store and that's what I am using.
As someone mentioned it's only for the viewable part of the screen; it doesn't make it down to the buttons which is what I wanted anyway.

I bought 2 screen protectors for the Arrive for my wife and I on Ebay from Clearfreak. They were cheaper on ebay than on their own website.
It is supposed to cover the entire glass.
I plan to install it on 1 phone and not the other to test out how thick it is, and if it degrades the sensitivity etc. I will post pictures/review once it comes in.

cyclical said:
I bought 2 screen protectors for the Arrive for my wife and I on Ebay from Clearfreak. They were cheaper on ebay than on their own website.
It is supposed to cover the entire glass.
I plan to install it on 1 phone and not the other to test out how thick it is, and if it degrades the sensitivity etc. I will post pictures/review once it comes in.
Click to expand...
Click to collapse
I did the same, except my last two experiences at applying a protector (and using the cardboard piece to clear off the air bubbles) was QUITE the failure
Luckily, my friends have told me any Sprint store will do it for free for you if you bring the cover and phone in. Sounds stupid, but somehow, I've never been able get those dreaded things to stay..
I will say, the protectors from clearfreak are primo. for 3.99, thumbs way the hell up

I'm using the screen protector for the evo shift, and its good.
Regarding Bluetooth; which ones are you guys using out there? Any recommendations for optimal performance regarding text to speech and announcing callers id names?

it's been a long time coming since the phone's release, but the boxwave cleartouch screen protector is really good. You can't tell its there after applying (it looks like glass). Had this on my old diamond back in the day and worked well for years.

Old thread, I know, but I'm still rockin' my 7 Pro. I wish US Cellular would get the Lumia phones.
Anyway I just want to add that the BodyGlove case for this phone (designated as an HTC Arrive case) is fantastic and is less than $5 with free shipping on Amazon.
I can't post links here until I get 10 posts, so just search for "Body Glove Glove Snap-On Case for HTC Arrive" in Amazon.
Mine has survived several drops on pavement with no damage to the phone.

Nice
myaser coder c++ java v basic.
Got 2 bcm21553 devices

[Q] I need to order a new screen protector for my HTC Desire

Mod edit: This post looks like spam, but I won't remove the thread as it has useful discussion in it.

It could die. But seriously... screen protectors? Why bother wasting your money? To be honest, you might need it if you have say keys in your pocket, but who's stupid enough? I don't know but screen protectors are a waste of time and money.

Meaple said:
screen protectors are a waste of time and money.
Click to expand...
Click to collapse
To be fair, I use screen protectors. Just to be on the safe side, and they are non-obtrusive. And a waste of money? I have to disagree with that. I got 6 screen protectors off eBay for 99p UK seller- UV protection, anti-grease, anti-dust, anti-scratch. They last for about 3 months.
I think if you want to be safe, get a screen protector. They might protect your screen from damage one day, and for pennies its a worthy investment.

I disagree with Screen Protectors being a waste of money. My phone was in mint condition until I bent over and my phone slipped out my pocket.
It landed face down, on stones. I now have a scratch going right across my screen.
You get really cheap ones. But don't waste your time with those. You won't be able to see very well through them.
Go with Martin Fields protectors. Way more expensive, but worth it. I have one now.

I've used a Martin Fields one since day they were released and, combined with my HTC pull cord case, I've not got a mark on my handset. Small outlay for piece of mind IMO

I got some of these: http://www.amazon.co.uk/FoneM8-Desi...UKGK/ref=sr_1_1?ie=UTF8&qid=1305831209&sr=8-1
Crystal clear, cheap as chips and doesn't interfere with the phone in any way.

EddyOS said:
I've used a Martin Fields one since day they were released and, combined with my HTC pull cord case, I've not got a mark on my handset. Small outlay for piece of mind IMO
Click to expand...
Click to collapse
exactly the same as me since i bought my desire. perfect combination and my desire still looks like new.

I'm using Martin Fields atm. I like the fact that it comes with camera protector as well. On the other hand I find it more "scratchable" than Brando Crystal Clear I've been using before. After a year it's so scratched I gotta change it. I'll try either 3M Vikuti or Writeshield Crystal now - these are are said to be among the best.
I do recommend to buy a good screen protector and apply it properly - this is a really good guide:
http://forum.xda-developers.com/showthread.php?t=1015394
You'll never notice it's there, it'll serve you a long time, you won't have to bother with several ****ty cheapos that require frequent changes and worsen the overall user experience (worse screen clarity, bubbles, don't fit to screen properly, don't stick on the edges, unpleasant in touch etc.).
This is my take on screen protectors.

I've been using a Zagg protector for the last 6 months. Excellent protection but find the screen isnt 100% responsive or smooth.
Tempted to try another but worried that it wont go on and fit as well as the zagg...

Has anyone experience with the original HTC-Ones (HTC SP P360)?
Regards,
chrrh...

Spambot?
AdamA853 said:
I have purchased an HTC Desire from Electronics a week ago. Their services were great and shipment response time was awesome. I am a frequent user of any cell phone. This is the reason why I need a new screen protector. I have also purchased an Iphone 4g unlocked from Electronics, but their protector is the best. HTC guys are bad in giving bad quality protectors and we have to buy protectors once each month. I just want to ask you guys one thing that what will happen to the mobile phone if rain water goes inside?
Click to expand...
Click to collapse
Did everyone miss this? Maybe it's just me, but this looks just like SPAM. Either way, there are a ton of screen protector threads already, right? I went ahead and reported it.

JokerNJ said:
I've been using a Zagg protector for the last 6 months. Excellent protection but find the screen isnt 100% responsive or smooth.
Tempted to try another but worried that it wont go on and fit as well as the zagg...
Click to expand...
Click to collapse
I had a Zagg and hated it. It distorted my screen and was not smooth to touch and drag on. I have the Vikuiti (3M) one mentioned in the "perfect application of a screen protector" thread and I couldn't be happier. I've had it on for more than a month. If I didn't know better I wouldn't even know it was there. It's VERY smooth and crystal clear so it doesn't interfere with the screen at all.

I just ordered a Brando anti glare one from there site, after watching some video's of it on youtube it looks very good.

did you guys are so poor??
http://www.dealextreme.com/p/lcd-screen-protector-with-cleaning-cloth-for-htc-g7-desire-42063
use them half of year. Did you think its a wasting of money for you 250eur phone?

It's only 2USD here in the Philippines. [

Unicorn Beetle Case

Hi
My unicorn beetle case just arrive and I want to share my toughts with you.
First I order it from Amazon as I live in Chile the final cost was around 50 bucks.
I drop my first moto x 2014 (the one in the pics) and it screen shattered so a case for my new moto X was a must.
The case came in a really simple cardboard box, inside you find the 3 parts of the case:
- Front panel
- Back panel
- Belt clip holster
The plastic bag that contain them have a QR code with a link to a video of how asamble it but is really very easy.
The front panel have a integrated screen protector and only leave the mic, front camera and speaker unprotected (this is why this case is not waterproof).
The backpanel leaves the Motorola, the camera and the back mics unprotected also, but it have protectors for usb port and the audio jack.
The only fail that I notice is the holster, only once I was able to attach the phone to it, I haven't been able to do it again, it should be a lot more easier, but anyway I dind't plan to use it.
The phone dosn't gain a lot of weight and I still feel it comfortable.
Some photos
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10405301_10152553649268087_4469391920130927022_n.jpg?oh=8d7511c2cbfc010f120973702630fb9f&oe=550D4C81
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10806349_10152553649388087_3407626409072602358_n.jpg?oh=2a8abb90dd5144da3481391dbc1befdb&oe=551C27EA (bubbles are from the phone screen protector not the case)
https:// scontent-a-gru.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10805777_10152553649488087_2531340061064646856_n.jpg?oh=91403792398331180f6afe21ecc3baf2&oe=55074813
https:// fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10389011_10152553649728087_8947927708711168419_n.jpg?oh=73d17d5df7fff4b68b84570d2aa7289c&oe=5518C45F&__gda__=1428036896_20efd91e8fa2e0d5d4718e9fde82870a
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1972507_10152553649968087_18121166613486209_n.jpg?oh=741823360366a47bb0c241a1021c1439&oe=5506B170
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10393956_10152553649863087_2683143752115958080_n.jpg?oh=6bf6b9fa2264386a272e4bf24af1d7ec&oe=54D99F75 (the stains are my fault)

Where did you buy it from? I am looking on amazon and I dont see it for sale any more.

blkbltwrestler said:
Where did you buy it from? I am looking on amazon and I dont see it for sale any more.
Click to expand...
Click to collapse
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.

Update:
The holster works great but the screen goes looking inside, the camera face out that is the reason why it dont fit when i tried

CTuna said:
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.
Click to expand...
Click to collapse
Thanks! thats all I was able to find too.

blkbltwrestler said:
Thanks! thats all I was able to find too.
Click to expand...
Click to collapse
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.

CTuna said:
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.
Click to expand...
Click to collapse
yikes that is crazy. Thats probably what happened they just sold out. Hopefully they get more in stock soon.

Can you give me the name of the Amazon Seller that you bought this from?

l_stevens said:
Can you give me the name of the Amazon Seller that you bought this from?
Click to expand...
Click to collapse
I think that was supcase as they made them, but I can't give you a specific answers as I bought it from Busca Libre a website that buy the things for you and handle all the shipping, taxes and other and charges you in local currency

Its back in stock!

CTuna said:
Its back in stock!
Click to expand...
Click to collapse
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.

blkbltwrestler said:
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.
Click to expand...
Click to collapse
I don't know if that will be a great idea, I use mine all the time but for a test that I really need to use wolfram alpha I remove it, I haven't been able since then to use it with out bubbles in the screen protector.

Actually bought one,
Very happy with it, just the hard plastic back is easily scratchable, i already got a deep scracth in it... Tried it on a coloured back moto X too and the frosted back is wonderful !
15€ on Amazon.fr

any updates? i tried the link you posted but had no luck. i got my phone on jan 2,15 and havent yet been able to find a case i like for it.

I've had this case for about a week, and I have mixed feelings. It's a very rugged case, and I feel comfortable about the phone not being damaged. However, there are a few things I would change about this case if I could. First, since the case isn't waterproof, it could do without the integrated screen protector and headphone/power port covers. It takes a little bit of dexterity to hold the cover open just to plug in the charger. Secondly, the power and volume buttons could be more pronounced. I have accidentally turned off the screen many times while trying to adjust the volume.
I don't regret the purchase, though, and I'd definitely recommend it as an alternative to Otterbox.

I've had this case in white for just over a month, here are my impressions.
- sturdy case
- excellent quality
- great price
First thing I did was yank off the screen protector. It is a far better plan to apply something like a BSE skin than to keep using the screen protector that's included.
This means you can take off/on the case with little fuss as much as you want. Its easy to remove and seems up to the task of repeated removal.
The fact that the front of the phone sits in the trim piece is awesome. Makes for a sandwiched and protected feel.
I like the port covers. Yes, they can be a pain to pop open for time to time but again they also seem to be built well enough to take the abuse.
Since we don't have a waterproof phone but only the nanocoating inside I like the added ingress protection that they offer.
I have the white/grey case and it is gaining some darkness on the corners but I'll blame my grubby mitts on that one.
The holster is good not great. Phone sits well in it and feels well made. Too bad its missing the kickstand in the clip.
All in all I give it a 9/10.
For the price it sells for and the protection it offers its a no brainer.
Sent from my BambooX

white unicorn?!
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*

buraian98 said:
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*
Click to expand...
Click to collapse
I have it in white. Here are a few photos I took. The photo of the front is a bit blurry.. Sorry!

I've had one of these cases for a while. I only use it when at work and do a manual job with dust, grit, grime and angry bovines. Well they're not angry all the time! The case is the dark gray/black and is in not bad condition considering. The Moto X on the other hand is pristine despites drops out of open tractor doors, drops onto concrete and countless excursions onto cab floors.
The built in screen protector is useful as I don't have anything on my moto x 2014 screen. I tried a couple of the glass screen protectors but removed both after a short time with the edges lifting and dust getting under the lifted edges. I also like the port covers though agree both are a little tricky to open. That said I rarely open either when the case is fitted. On previous phones I've has dust and chaff get jammed in the usb port and once somehow managed to get an animal feed pellet stuck in the headphones jack.
When I ordered the Unicorn case, unbeknown to me the mrs had ordered me an Otterbox Defender case so have that as well. It seems to bulk the phone more than the Unicorn case and the rubber texture makes it less easy to remove from pockets. It is also harder to fit compared to the Unicorn but on the other hand you about need a tyre lever to remove the Unicorn. It's a good case but prefer the Unicorn. I say again I only use a case on my Moto X for work. For pleasure it goes bare

I ordered the Beetle case, and it is in my opinion, the best case I have tried for the phone.
Thanks for the suggestion

G6/G6+ cases & screen protectors

Well, let's see how this develops...
As for a case, I got these two for starters:
https://www.amazon.de/Spigen%C2%AE-Elastisch-Stylisch-Handyh%C3%BClle-Schutzh%C3%BClle-RA-Schwarz/dp/B07B9SKC5K/ref=sr_1_1?ie=UTF8&qid=1527018512&sr=8-1&keywords=motorola+g6+plus+h%C3%BClle+spigen&dpID=510FXckhR3L&preST=_SY300_QL70_&dpSrc=srch
https://www.amazon.de/iBetter-Shock...pID=51XML3FlA7L&preST=_SY300_QL70_&dpSrc=srch
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.

Hi @Howlbeck,
I don't recommend the first one... I have a similar one for my Moto G5+ and it makes the phone very big. It's pure plastic!
For the second case, it may be thinner. So if you purchase it, please comment about it.
Any idea for a good screen protector?
Regards.

i bought mine like the first one and its really thin but it can absorb some falls and protects camera .

RokCruz said:
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
Click to expand...
Click to collapse
Please, can you share real photos of it?
Thank you!

manos78 said:
Please, can you share real photos of it?
Thank you!
Click to expand...
Click to collapse
Sure! here you are:
I cant take a photo of my phone wearing it because i havent other device.

Same here - only difference: my one has "spigen" plus the logo imprinted. The other 2 pics are the IBetter.
https://imgur.com/a/MsSBz1U

To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
When I'm at home or at stationary work, the case(s) comes off.
The one Motorola includes with the device is ok, but... Big but.
I do like soft, transparent cases - but they tend to fade to yellowish pretty quick, doesn't matter if you are smoking yourself or not.
As there is no soft transparent case available as of yet - the Spigen it is.

Howlbeck said:
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
Click to expand...
Click to collapse
Me too!
I'll continue searching for a very lighty case.
Thank you!

Can anyone suggest me a case that adds grip to the phone since the glass back makes it very slippery? Too bad dbrand's grip case is not available for the Moto g6 plus .

As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
As for cases making the phone bigger - well
The G6+ already is big, so I don't really care about a few more mms as long as it protects the device properly. Spigen did a very good job in the past, so I tend to coming back.

Compared to our Nexus 6P (Huawei) - this is "smaller" overall, barely bigger (taller, mostly) than the old Nexus 5X (LG) but - between Mrs. and myself, one of us will be using it. For an entry/budget Project Fi phone priced at $199 + tax, free shipping, I am very pleased with how it feel, look & setting it up, waiting for the case to arrive (delayed in transit ... by a day)
This is what I ordered, found it on Amazon - not a major "brand" name but appeared to provide the extra protections that we usually look for, and should not be too bulky. Otherwise, it does feel slippery especially with one-handed mode and we are know, sooner or later, it will be dropped accidentally - a little extra help on the corners & edges won't hurt. If a better & nicer case come up, I don't have a problem spending more or having an extra one around.
https://www.amazon.com/gp/product/B07DCKVM5B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Once I get that, will put up pictures & have a side-by-side with the N6P (and, most likely, before I ship out the N5X ... battery is starting to not hold its charge, taking advantage of the "generous" trade-in allowance valued at $95, not bad - net cost to get the G6 is something I can live with, i.e. minus NFC, no G.Pay)
Been using Supershieldz's Glass screen protector and pleased with it, got 2 of them, so always have a spare around, just in case - put it on easily this afternoon, almost got it perfectly but at 98.5% - missed 2 spots with tiny dust trapped, but, who's going to notice it when device is powered on - only notice it when screen is dark/blank or powered off. Here's what they look like now.

Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
The other option is the "classic" glass:
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.

manos78 said:
Hi, Regarding the screen protector, someone has used this "full screen" version? ... The other option is the "classic" glass ... I like to know the difference.
Click to expand...
Click to collapse
The first one has the cutoff around the earpiece, speaker & front camera openings, covered the front of the smartphone all around (and it's priced higher) ... should be precision cut - careful alignment & placement when installing is a must.
The second one is easier for them to produce with the simple cut out, and "could" leave some of the digitizer/screen area "less" protected ... installation is basically the same but a very slight misaligned placement should still be fine during the installation process. It's similar to the one that I just installed yesterday - with a protective bumper case over it, the odds of scratching or damaging the Gorilla glass is still fairly low. Plus, I make it a habit to always order an extra spare & set it aside, just in case - the old one that I used on the Nexus 5X has a lifetime & free replacement warranty, no questions asked - just proof of it being worn/damaged & they quickly mail a new one at no charge (worth paying a little more for those brands upfront).
On a side note, this Moto G6 ... is "cute" and slim, feel "small" in the hand but with the 5.7" widescreen ratio, is very nice for the price level - too slippery to use without a case when holding it (especially with the glass back.)

manos78 said:
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
Click to expand...
Click to collapse
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP

My Amazon G6 case arrived, and it came also with a clip-on face plate for belt carry ... something that is "nice" but I dislike, the hardware/spring doesn't look solid & could break - won't be nice to drop this at a height of several feet, unlike using one of those bulky Otterbox. Not going to use it - I either carry mine in a pocket or otherwise, use a BDU-style canvas pouch (in black).
Here are pictures of the G6, it's in the middle, for comparison with the Nexus 6P (Huawei) and the (LG) Nexus 5X (without the same style protective case) "naked" on the right for comparison.
The HD glass protector do leave a little area around the front surface of the G6 without "coverage" - dusts & lints, dirts could collect around the rim of the case/frame, so a periodic cleaning will be necessary, see the 2 close-up pictures.
We also have the old Motorola Nexus 6 and that's "big" compared to these - the G6 is about the same size as my dual-sim Huawei Honor 5X which I use for travel - the Moto G6 is very comfortable & feel solid being held in one hand with the case, providing a non-slippery hold ... and, it slide right into my old canvas belt pouch for "rough" day-to-day carry outside.

ryancell said:
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
Click to expand...
Click to collapse
Thank you! I feel I'll purchase the full screen protector. :good:

manos78 said:
Thank you! I feel I'll purchase the full screen protector. :good:
Click to expand...
Click to collapse
Keep in mind the full ones only have the adhesive around the outer edges and can pop off easily if you don't have on a case that protects the edges. But at the cost, they last a long while in my experience and look great!

Howlbeck said:
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
Click to expand...
Click to collapse
Thank you for the info. In that case I'll wait until some intermedium solution will appear.
Regards.

I got the Poetic Karbon Shield, nice slim case, fits really good and adds a bit of grip on the sides. https://www.amazon.com/Poetic-Karbo...529368131&sr=8-4&keywords=moto+g6+poetic+case

I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Click to expand...
Click to collapse
For every phone I buy a Spigen case. I also bought for Moto G6 and I was not disappointed.