Hi there!
i have searched all over without an answer..
i have an HD2 that hangs when i install hebrew support, it worked when i had the stock rom but when i flash all kinds of roms (energy, miri, dutty) it does the soft reset and hangs on the HTC screen on startup..
the hebrew support works on energy rom on my touch HD.. i can't even find someone else with the same problem.. or someone who can help me.
thank you in advance,
what hebrew version are you trying to install? (free, eyron, something else?), if free - where did u get it from?
wow just understood it's another problem
it's not the hebrew.. when i soft reset the device it won't start again..
after rom installation or hard reset starts only once
Related
i have a prophet that i have flashed wm6 rom's without any problem, it happens today when i flashing a mistirious rom, and i don't know why he crashed in the middle... now, i hard or soft reset him, and he do move from the first screen with the version OS etc...
my question is,
is that other way to put the rom inside, or what can i do?? the active sync don't find him too...
is he dead?
help me please...
thanks,
Alex
my msn contact is
[email protected]
he's back!
thanks
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
How about flash ur stock ROM back, then revert the stock SPL. There may be semething wrong with ur device
GERMAN ROM
http://forum.xda-developers.com/showthread.php?t=426400
German ROM work fine
Guess what .... after flashing back to a german ROM (thks for the link to an htc oiginal ) the "customization" with Opera9_DE went well and finish up normally.
i am going to work/play a bit with the German version to make sure it does not come from the device
any other idea in how/why my German o2 xda does not love all the great simple ROM cooked here ??
is any o2 Germany user here havig successfully flashed their xda with an English (or French ) ROM ??
Thanks guys for the great work you do here !
Steph.
I am seeing this exact same issue.
I have had no end of grief flashing my Raph, I maintain an XP VM (I am on OS X) entirely for flashing. I have flashed many different devices with dozens of ROMs and never had a problem until I got the Raphael. I have seen BSOD's and numerous connection issues while flashing using both Raphael_CustomRUU_v1.2 and RaphaelWrapper.
Also, every ROM I have flashed (on a XP SP3 box I put together from old pieces just to flash this bastard) has hung whilst installing opera.
I am using the o2 uk variant (as yet unreleased XDA Serra).
It is a RAPH120, is this unique to o2 devices?
Would appriciate any help getting this sorted, it could become a more widespread problem with the o2 uk variant is released, as there may be an influx people wondering why their device wont flash properly.
nb. I have an unreleased o2 built ROM (RUU_Raphael_O2_UK_1.60.206.1_radio_sign_52.29.25.12_1.01.25.16_Test.exe) that flashes and installs fine even from inside my VM.
Thanks in advance for any help anyone could provide!
[UPDATE] I tried installing Opera build 1957 from a cab and it worked fine.
maybe a dumb suggestion... but try to get your device unlocked and see what happen
I checked with Oli about whether unlocking would help:
Olipro said:
I see, then that's a weird issue, however, not related or fixable by the unlocker.
your best bet is to do a soft reset as soon as the customization dialog appears and see what happens.
I was initially suspecting it could be region protection, but in those cases, the ROM doesn't boot at all, so your case is a strange one.
Click to expand...
Click to collapse
So no leads there, as an interim solution I will repack ROMeOS² v1.03 without Opera and see how that works out.
i have the same device and the same problem. I will try to repack it with the german version of opera..
Oh dear, so it would appear that current roms do not work on O2 variant devices...
Has anyone successfully flashed an O2 device (with a cooked rom)?
I have hit some problems repacking ROMeOS² as hung has included measures to stop people making their own roms based on his. I pm'd him last night asking if he could help us out, but as of yet I have not recieved a reply.
I will probably start making my own rom from scratch tonight, but its a fair bit of work just to take opera out of the customization sequence. Hopefully its just some odd bug in the opera install, rather than something more serious. I guess worst case scenario is that after opera is removed it just crashes at another point during the costomization process.
[UPDATE]
hang.tuah said:
@dabs
I'll try to make it [ROMeOS² without Opera] for v1.04 mate, thanks for ur support..
Click to expand...
Click to collapse
Excellent, so at least we have a workaround in the pipeline. Still, it would be best to find the cause of the problem, as not all cooks have the time and dedication to make special versions of their roms for a small sub-set of users.
Actually Opera is included but with no device specific & v1.04 is done
smaier said:
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
Click to expand...
Click to collapse
Hi Stephane and others having similar trouble,
I had the same situation but my original ROM was Japanese, after trying a lot of possible official WWE versions for flashing and cooked ROMs, only one version worked.. Check the official WWE version Singtel.. it worked up to customization without problem.. the only difference the default internet page is Singtel but it is not a problem cause I can still go to the other sites..
Hi everybody.
I have, installed on my Htc touch cruise, the Kostas wm6.5 Rom.
Everything seems to work wonderful, but I have a problem.
Sometimes wm6.5 blocks everything and I have to make a soft reset.
After that, wm6.5 doesn't restart for a few seconds.
Subsequently my Polaris makes a Hard Reset by itself, without any kind of request or intervention.
Someone can help me?
Thank you very much!!
its a bug in some of the builds. please talk about this in your ROM thread
This is what happend to me! exactly with this kernel and after some time I even couldn't turn on this device, it'was like a dead no screen. After 5h without battery it again started but after that again freeze, so now I installed original http://www.htc.com/www/SupportDownload.aspx?p_id=59&cat=2&dl_id=113
But it restart themself during loading, so now I am solving what to do probably I will try install ROM from SD card. But this is 2 issue, I don't know if there is som corelation between them, but first is that phone seems like that and need rest for start, now it I am nearly sure that it's HW problem and 2nd is bad OS.
But anyway I am trying to ask if you have similar experience, because my case start exactly same as yours, but now ends in real hell
EDIT: I definitelly had Kostas too, but I think that WM6.1
EDIT2: Can you send your S/N number, it's weird beacause friend which sold me this phone told me that phone was working 1y absolutelly OK and now around same date as you happend something similar, that's weird, or you have new phone?
Thanks anyway!
I flashed the original ROM and than Kostas' ROM. Now everything is ok!
I'm sorry I can't help you.
Bye
what you mean under original? I am pretty confused from so many versions now, can you give me link?
Have you used the correct radio?
I've installed an Italian Rom wm6.5 and I've had to install Radio 1.59 before install the ROM, then it's better to install an original ROM like this:
RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85. 30.07_1.59.42.15_Ship
Daniele
From Kostas Rom Page:
Radio not included.You must use any 1.59.xx.xx version.(1.59.46.12 is the latest and recomended.)
general guidelines;
certain application is not working (particularly camera) -> change your radio
system unstable, random freezes -> hard reset
hard reset cannot solve the problem -> flash stock rom, then reflash custom rom, then hard reset.
good afternoon guys! i have a strange problem on my HD2. if the phone is in stanby and i receive a call without answer and i press the right button to restore the device from standby, the screen is black and i need to restart the device with softreset button...
do you know why?
thank you
David
Hi rotoloz,
Which ROM did you install on the device? Hadn't you done the 1.66 upgrade yet?
Apart from this, I was thinking that you posted your message in the wrong place........ Your matter is a ROM bug one, not an app/theme one, you should've posted it in the HD2 general room
thank you for reply.
yes my rom is 1.66.408.1 (76641) ita official rom
You're welcome.
this 1.66 ROM 's been supposed to be bugged since the day it was come out. HTC uploaded it without making sure it worked properly, I think. They should've tested it much longer instead.
I would recommend you to try another ROM, a cooked ROM obviously. Have a glance on the ROM room and then you can decide what to do. You're going to get all information in order to download and flash your device.
I personally recommend you to install the Duttythroy 1.8 ITA ROM, take a look on www.htcpedia.com, you'll find a link for downloading it there.
Cheers and enjoy hacking your device!!
this?
Duttys Leo HG Multi-Lang V1.8 ITA
February 09, 2010 07:40 PM
thank you very much
Yes, that's right.
Let me know if it fits into your needs
ok just done!!! thank u so much! but only one question about the reset button.. because i want change the icon but cannot delete or modify the file reseticon. how can i do this? i've just used the iconchanger program.
thank u
sorry but i need to update again.... same problem. from standby when i press again the button to restore from the standby, the phone doesn't wake-up and i need to reset again to restore... htc support said to take the phone to support for see what happened.
so now i restore the default rom (for take phone to htc support)...
there is problem with your ROM. you just need to update your ROM from HTC website.
the original update from htc i've just done! thats why i'm here to ask you... thank you
Is the Facebook app set to be updated automaticaly? (in contact tab, not the WM Facebook app)
If so, you could try to disable it, then do a soft-reset, and let me know if it's still freezing. It worked for me, my HD2 doesn't freeze anymore. It might work for you.
Hope this will help you
sarce39 said:
Is the Facebook app set to be updated automaticaly? (in contact tab, not the WM Facebook app)
If so, you could try to disable it, then do a soft-reset, and let me know if it's still freezing. It worked for me, my HD2 doesn't freeze anymore. It might work for you.
Hope this will help you
Click to expand...
Click to collapse
yes it was automatically update every2 hours....
now not. i'll be update this thred for information.
thank you very much!
I have this problem too
Problem found.
Hi guys,
I have this problem too with the 1.66 rom.
After some reboot, some uninstall of progz etc...
I have found "my" problem: HD2Tweak! Damn!....
I uninstall it (2 months earlier), after that no more freeze with my 1.66 rom.
So I couldn't use HD2Tweak now.... No mather, I do the tricks manually.
There's a thread on the forum to do the tricks manually ;-)
Hope that help you!
I don't have HD2 tweak installed... but for now no freez but another problem... sometimes windows mobile show a message that file "filesys.exe had a problem" and if i close that message the phone is ok. but WHY?
Good morning guys! an update to my problems...
after reset, hard reset etc.. i decided to turn off HD2 during charge during night.
I never saw my problems again. No freez, no filesys.exe error. Battery with normal usage (from 7.30 am to 8.30pm) for e-mail, calls during day web browsing is better than before!
Is only mine? thank you for support.
Bye
Hi.
I have a problem, my HTC touchscreen don't work is Android OS, but its full working in recovery (4ext). I flashed lots of rom, i wipe everything then install official RUU but it's still not working. I use TP calibration pack without success. Sorry for my bad english.
Please help
read this thread
http://forum.xda-developers.com/showthread.php?t=1239238
it might help you
best wishes to you