Related
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
Hello,
First my question :
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Then the context:
I'm a newbie and 2 days ago I've tried to upgrade my I-Mate K-Jam to WM6.1.
After having carrefully read several thread and in particular the thread "Wizard Windows Mobile 6 for newbies" i first start to unlock my G4 mobile with HardSpl. This was a great success so I moved on to the next step loading a WM6 ROM. I choose the WizFlo 6.1.1.4 (http://forum.xda-developers.com/showthread.php?t=435228) but this was not a success since my K-Jam was just looping on the splash page/alignment wizard and reboot. I really thought that I had turned my mobile into a brick but was still continuing to investigate and yesterday evening I've learned how to just start the bootloader by pressing the camera button while starting-up. Yepee, 2 a clock this morning, I succeed loading the vanilla version of the TNT rom : http://forum.xda-developers.com/showthread.php?t=388229. Super everything was working fine so I went to bed.
This morning, very proud of what I've done alone I just decided to move from the TNT vanilla version to the professional version. This was a mistake since then I was never able to restart my K-Jam. It just freeze on the TNT splash screen. I've tried to reload several other rom but the TNT splash screen remains and my mobile just continue to freeze.
I'm now thinking about reinstalling official ROM but my question is : should I remove Hard spl and move back to initilial IPL/SPL before loading the WM5 rom.
Thanks in advance for your help
YES!
In order to revert back to official rom,you'll first have to remove HardSPL,otherwise it'll Brick the phone.
Secondly, have you tried a Hard Reset,it might help the phone to start working.Is your battery fully charged ?
After getting the phone HardSPL,there's no reason for any wm6 roms like TNT to stuck up,it might be that the battery is weak or flat.
Get the battery fully charged,try a Hard Reset,otherwise reflash TNT.
Thanks for your answer, I'm not sure about the batterie status. Am i able to refill the battery in bootload mode. or does the official K-jam charger work in my mobile is not yet started.
Almost a week I'm working on my mobile but no sucess yet.
One more question, Is there any special restart or reboot to be performed once the rom load process is complete ?
I've tried to install Loverom or merlin rom but even if the splash page change I never go furher. I'm now considering on moving back to an official ROM. But since I didn't backed up mu rom before all of these update process I'm gone use a download one.
K-JAM_WWE_216901_2169101_020710_ship.exe. This official package install a ROM file and the RUU utility, but how can I check that the rom does not contain IPL nor SPL file.
Is there a way to check rom content before a load. I'm using hardspl and I've read that if I instal a ROM with IPL/SPL i will turn my device into brick.
May be I should also remove hardspl but how can I do this ?
Solved !!
I just notice a format error when hard reset.
Google it and find his thread
http://forum.xda-developers.com/showthread.php?t=428312&highlight=format+error&page=3
Fixed yepeeee.
thanks to all for your help.
Good that you solved it finally, Happy Flashing
Welcome
Yesterday flashing Rom and on the 100% drop write error is thrown when the plugin is now just the first picture, and ignite it, not even vibration to start. maybe what can help reflash now rom?
We need more information!
What device do you have? A S710 or some branded version....
What ROM was on your device before you flashed?
Which ROM exactly did you try to flash?
HTC S710
ROM was original
i tray flash Shadow neo for 710+ Nsimsun-chs from here http://www.ioicn.com.cn/forum/thread-327764-1-1.html
Did you do USPL before flashing?
yes i flashed ROM several times
thanks for help i fixed my phone
Hi everybody.
I have, installed on my Htc touch cruise, the Kostas wm6.5 Rom.
Everything seems to work wonderful, but I have a problem.
Sometimes wm6.5 blocks everything and I have to make a soft reset.
After that, wm6.5 doesn't restart for a few seconds.
Subsequently my Polaris makes a Hard Reset by itself, without any kind of request or intervention.
Someone can help me?
Thank you very much!!
its a bug in some of the builds. please talk about this in your ROM thread
This is what happend to me! exactly with this kernel and after some time I even couldn't turn on this device, it'was like a dead no screen. After 5h without battery it again started but after that again freeze, so now I installed original http://www.htc.com/www/SupportDownload.aspx?p_id=59&cat=2&dl_id=113
But it restart themself during loading, so now I am solving what to do probably I will try install ROM from SD card. But this is 2 issue, I don't know if there is som corelation between them, but first is that phone seems like that and need rest for start, now it I am nearly sure that it's HW problem and 2nd is bad OS.
But anyway I am trying to ask if you have similar experience, because my case start exactly same as yours, but now ends in real hell
EDIT: I definitelly had Kostas too, but I think that WM6.1
EDIT2: Can you send your S/N number, it's weird beacause friend which sold me this phone told me that phone was working 1y absolutelly OK and now around same date as you happend something similar, that's weird, or you have new phone?
Thanks anyway!
I flashed the original ROM and than Kostas' ROM. Now everything is ok!
I'm sorry I can't help you.
Bye
what you mean under original? I am pretty confused from so many versions now, can you give me link?
Have you used the correct radio?
I've installed an Italian Rom wm6.5 and I've had to install Radio 1.59 before install the ROM, then it's better to install an original ROM like this:
RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85. 30.07_1.59.42.15_Ship
Daniele
From Kostas Rom Page:
Radio not included.You must use any 1.59.xx.xx version.(1.59.46.12 is the latest and recomended.)
general guidelines;
certain application is not working (particularly camera) -> change your radio
system unstable, random freezes -> hard reset
hard reset cannot solve the problem -> flash stock rom, then reflash custom rom, then hard reset.
good afternoon guys! i have a strange problem on my HD2. if the phone is in stanby and i receive a call without answer and i press the right button to restore the device from standby, the screen is black and i need to restart the device with softreset button...
do you know why?
thank you
David
Hi rotoloz,
Which ROM did you install on the device? Hadn't you done the 1.66 upgrade yet?
Apart from this, I was thinking that you posted your message in the wrong place........ Your matter is a ROM bug one, not an app/theme one, you should've posted it in the HD2 general room
thank you for reply.
yes my rom is 1.66.408.1 (76641) ita official rom
You're welcome.
this 1.66 ROM 's been supposed to be bugged since the day it was come out. HTC uploaded it without making sure it worked properly, I think. They should've tested it much longer instead.
I would recommend you to try another ROM, a cooked ROM obviously. Have a glance on the ROM room and then you can decide what to do. You're going to get all information in order to download and flash your device.
I personally recommend you to install the Duttythroy 1.8 ITA ROM, take a look on www.htcpedia.com, you'll find a link for downloading it there.
Cheers and enjoy hacking your device!!
this?
Duttys Leo HG Multi-Lang V1.8 ITA
February 09, 2010 07:40 PM
thank you very much
Yes, that's right.
Let me know if it fits into your needs
ok just done!!! thank u so much! but only one question about the reset button.. because i want change the icon but cannot delete or modify the file reseticon. how can i do this? i've just used the iconchanger program.
thank u
sorry but i need to update again.... same problem. from standby when i press again the button to restore from the standby, the phone doesn't wake-up and i need to reset again to restore... htc support said to take the phone to support for see what happened.
so now i restore the default rom (for take phone to htc support)...
there is problem with your ROM. you just need to update your ROM from HTC website.
the original update from htc i've just done! thats why i'm here to ask you... thank you
Is the Facebook app set to be updated automaticaly? (in contact tab, not the WM Facebook app)
If so, you could try to disable it, then do a soft-reset, and let me know if it's still freezing. It worked for me, my HD2 doesn't freeze anymore. It might work for you.
Hope this will help you
sarce39 said:
Is the Facebook app set to be updated automaticaly? (in contact tab, not the WM Facebook app)
If so, you could try to disable it, then do a soft-reset, and let me know if it's still freezing. It worked for me, my HD2 doesn't freeze anymore. It might work for you.
Hope this will help you
Click to expand...
Click to collapse
yes it was automatically update every2 hours....
now not. i'll be update this thred for information.
thank you very much!
I have this problem too
Problem found.
Hi guys,
I have this problem too with the 1.66 rom.
After some reboot, some uninstall of progz etc...
I have found "my" problem: HD2Tweak! Damn!....
I uninstall it (2 months earlier), after that no more freeze with my 1.66 rom.
So I couldn't use HD2Tweak now.... No mather, I do the tricks manually.
There's a thread on the forum to do the tricks manually ;-)
Hope that help you!
I don't have HD2 tweak installed... but for now no freez but another problem... sometimes windows mobile show a message that file "filesys.exe had a problem" and if i close that message the phone is ok. but WHY?
Good morning guys! an update to my problems...
after reset, hard reset etc.. i decided to turn off HD2 during charge during night.
I never saw my problems again. No freez, no filesys.exe error. Battery with normal usage (from 7.30 am to 8.30pm) for e-mail, calls during day web browsing is better than before!
Is only mine? thank you for support.
Bye