Related
Hi, here is a new version of a camera program, which runs under WM5: http://zone1.de/smartphone/index.html#experimental (right down at the bottom). Version 0.04 allows the selection of a video format and streams the video from the buil-in camera to the PC. The smallest video size is recommended, because the video is not compressed. On PC side, the video format can be controlled via registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Virtual Gadgets\VgCam\VideoFormat, with the following values:
FourCC (BINARY 4 Bytes)
Width (DWORD)
Height (DWORD)
BitsPerPixel (DWORD)
PixelCorrection (DWORD)
SwapUV (DWORD)
If the registry key does not exist, this default is used: I420, 176, 144, 12, 1, 1 (works excellent with a connected HTC S310)
I am interested in the video formats that other devices support. The device must be connected over ActiveSync. Configure the firewall appropriate. When you have tested, please post the result, the name of the device, and the listed video formats. The experimental version is free. Later you will get a discount on the full version (when it is finish... ;-)
I just read the other thread about video formats - its a long-running issue! - If the device shows YV12 then use I420 or IYUV on PC side.
Thanks and greetings
This is sweet. I can't figure out how to get it to work with any of the messengers though.
Thank you for the request. For the messengers you need the DLL. Here is a step-by-step instruction:
Put the "VgCam 0.04.dll" into the same folder on your PC where VgCamSetup.exe is.
Run VgCamSetup.exe. It sets the video format and also registers the DLL.
In the webcam setup of your messenger select "VG Camera" as camera source (but it works not with all messengers, and not all video formats are possible, as pointed out on the website, see post #1)
If you got it working (even if only with VgCamView.exe) it would be great if you could inform me of the name of your device and the video formats, which are listed on it, because I have not enough test devices. Here are the possible video formats of two devices, on which the application was tested:
HTC S310 (USB with 10 MBit/s)
YV12 176 x 144 @ 20 fps
YV12 320 x 240 @ 6 fps
YV12 352 x 288 @ 5 fps
XDA Neo (HTC Prophet)
YV12 144 x 176
YV12 240 x 320
YV12 288 x 352
Thanks and regards
wow
Its also possible to run this as an WLAN device in your network and connect it wireless so you can move around while (f.e.) VLC is recording it... very (!) nice.
love it.
Test on eten x800
Hey there!
i justed tested the 0.5 version on my eten glofiish x800. didnt work at all.. when i started the app on the device, the screen came, telling me INITIALLYsing.... and the on my desktop:
active sync shut down with an error message
thats it.
i had to reconnect.... tried a few times....didnt change a thing.
but i would love to have an app like yours working. so : COME ON
flo
Hi there,
I was watching yesterday a divx movie (320 X 240) using Coreplayer on my new IPAQ 614c.
1) I was surprised to see kind of stripes (evidenced in the black background (top right panel), see attached file). I have to say that I do not have this pattern on other devices (tested on a Dell and Eten PPC) using the same software and movie.
2) Changing the color profile (to native) helped. So is it the reason for this difference observed an other devices.
3) This does not happen for all movies. As such, some other movies (also in 640X480) just run very nicely. Therefore, I believe this has nothing to do with the hardware.
Do U also experience this?
Any feedback appreciated
Nobody?
Thanks
never heard about or seen the issue but then i dont watch movies really on my device
but in TCPMP the free version of coreplayer one can choose different drivers for play back i if i were you would try and see if changing the driver in coreplayer had any effect
I watched wanted on my Athena (VGA) on a plane last week and it was fine, no jaggediness, or black lines, and that is a pretty dark film too.
Rory
I've watched a few TV episodes and some Bourne, really good quality though. Only thing I'm trying to work out is the A/V offset.
Thanks for the answers...
I will try to play with the drivers.
Anyway, I was looking at the same episode in 640X480 and had no black line at all...
So strange
Looks like it is better choosing IntelXScale as a driver...
Also the benckmarks are better with these drivers...
Will put later this afternoon the different benchmarks.
Thanks again
Discussion over
I do not know why but I did not have IntelXscale selected (I think I was playing a bit too much with the options).
Anyway, the problem is solved now using this driver.
Also, a benchmark with the well-known Matrix trailer (640X352, Bitrate: 127 kb/s) gives nice results:
DirectDraw: 94.93%
IntelXscale: 216.58%
GDI: 106.57%
i just got the new coreplayer and it only shows the tytn2 driver..
is this better or is there somewere i could get this interxscale driver?
just playd a video that comes allong with the xperia, as a video sample
benchmark results were
Average speed 62,50%
Original data rate = 922 kbit/s
Bench. data rate = 576 kbit/s
maybe the IntelXscale dont show up because you dont have an intel xscale cpu
but an qualcomm ?
I have constructed some video tests and the preliminary data I am getting back is that the Touch Pro is not great when it comes to video playback. Not at the moment anyway. Though my tests were done with the latest Coreplayer I would extrapolate that the results are indicative of the overall video performance irrespective of the player used.
File 1: Mpeg-4 ASP Xvid 320x160 287 kbps
File 2: Mpeg-4 ASP Xvid 640x320 479 kbps
File 3: Mpeg-4 AVC x264 320x160 200 kbps
File 4: Mpeg-4 AVC x264 640x320 400 kbps
All audio is AAC 24 KHz 64 kbps.
Device: HTC Raphael
CPU&Clock: Qualcomm MSM7201A 528MHz
GPU: N/A (integrated ARM926EJ-S [email protected])
ROM: WM6.1 FireROM v0.3
File 1: 205.40%
File 2: 126.52%
File 3: 159.63%
File 4: 68.29%
Device: HTC Hermes
CPU&Clock: Samsung SC32442A ARM 400MHz
GPU: ATI Imageon 2282
ROM: WM6.1 PDACornerPro v25 RBSN
File 1: 387%
File 2: 140%
File 3: 114%
File 4: 34%
I don't know how much the video performance can be improved with newer ROMS or optimised software but I think it will take a while before any drastic improvements are seen, if ever. I have the video files available for those would like to test this for themselves and can PM the links. They short clips might be considered copyrighted so I will not post them.
Hmm
I have some DVD rips which were encoded for use on the Sony PSP, with the following attributes:
Format: MPEG4
Video: AVC aka H.264
Video Size: 480 x 272
Frame Rate: 29.970
Audio: MPEG4 AAC Audio
Audio Format: 96000Hz 2 Ch
I figured it'd be useful to be able to play those rips on my TP, so I tried it using Coreplayer v1.2.5.
There was no sound - I cannot fix this and have raised a ticket with Coreplayer support.
Nevertheless, the benchmark gave an average speed of 101.90% so that's not too bad.
Has anyone else tried these types of files on their TP using Coreplayer? Have you managed to get any sound?
The thread title should be changed into:
"Don't expect great video from CorePlayer on your Raphael."
The problem is not the Raphael. The problem is the CorePlayer! At least when playing MP4 files. I've tested several MP4 files and the CorePlayer is playing them choppy while the WMP Mobile has no problems!
As I've posted in the topic with touch pro issues:
poor directdraw, framebuffer/video performance.
Just to make an idea: an old device from 2005 with omap 850 200mhz CPU performs better in this area than the touch pro @ qualcomm 528mhz. what a shame. The test were done in this topic (in romanian, sorry). CorePlayer was used for benchmark. I will summarize.
- HTC Tornado overclocked (262Mhz) max performance: 174.22%
- Touch Pro max performance: 172,67%
Both in Raw framebuffer mode. When used QTV it gains only 162,64%. How come?
It's pitty, 262Mhz from OMAP performs better than 528!!!Mhz from Qualcomm?!
The video used for tests is this one. (320x240 @ 25FPS)
Click to expand...
Click to collapse
Of course, this may be fixed with software optimization.. But it's kinda annoying that the existing 3rd-party doesn't work so well..
I saw in a romanian review that touch pro is under diamond at Graphics index.
diamond: 1662.31
touch pro: 357.03
more: http://www.chip.ro/stiri/hardware/review:_htc_touch_pro/22135 (go to bottom)
peterbonge said:
The thread title should be changed into:
"Don't expect great video from CorePlayer on your Raphael."
The problem is not the Raphael. The problem is the CorePlayer! At least when playing MP4 files. I've tested several MP4 files and the CorePlayer is playing them choppy while the WMP Mobile has no problems!
Click to expand...
Click to collapse
All the .mp4 files I transcoded played fine in Coreplayer. The container (.mp4, .avi) is not the problem it's what is inside. Anything benchmarking over a 100% will play smoothly. I will PM you the links to my clips and you can tell me how they all play in both WMP and Coreplayer.
DSF said:
touch pro is under diamond at Graphics index.
diamond: 1662.31
touch pro: 357.03
more: http://www.chip.ro/stiri/hardware/review:_htc_touch_pro/22135 (go to bottom)
Click to expand...
Click to collapse
This is concerning. I want a device where I don't have to worry about converting video any more.
Wam7 said:
All the .mp4 files I transcoded played fine in Coreplayer. The container (.mp4, .avi) is not the problem it's what is inside. Anything benchmarking over a 100% will play smoothly. I will PM you the links to my clips and you can tell me how they all play in both WMP and Coreplayer.
Click to expand...
Click to collapse
With WMP the first two are running fine, the last two have just sound without a picture. The codec (H.264/MPEG-4 AVC) is not the problem because I have many vids with this codec running fine.
I don't have the time to test the files with the CorePlayer at the moment, but here are the specs of a file which runs choppy with the CorePlayer, but fine with the WMP:
Video: avc1 / H.264/MPEG-4 AVC / 480 x 360 / 509 kbps / 29.971 fps
Audio: mp4a: MPEG-4 AAC LC / 44100Hz 123 kbps, stereo
The problem of the current releases of coreplayer is that the QTV driver provided is not the one for the MSM7201A processor; it's the one of the TyTnII (MSM7200 If I'm not mistaken).
To fully exploit the "graphic accelerator" of our TPs I think we'll have to wait for an optimized version of coreplayer for our HTCs (coreplayer 1.3 as anounced in their website, as they say that a version optimized for Touchs will be released soon).
I've contacted HTC support about video performance.
Answer in short: "The Touch Pro is not made for playing Media. It was made as a business device."
TyTN was made as a business device and included ATI Imageon GPU.
Hmm...guess I learnt something new today. I always thought hardware wise the Touch Pro would be the same if not better than Diamond, i.e. whatever videos the Diamond can play, the Touh Pro can do just as well. But looking at the site provided in Mike's post, I'm guessing that's not the case.
phrozact said:
Hmm...guess I learnt something new today. I always thought hardware wise the Touch Pro would be the same if not better than Diamond, i.e. whatever videos the Diamond can play, the Touh Pro can do just as well. But looking at the site provided in Mike's post, I'm guessing that's not the case.
Click to expand...
Click to collapse
I really think there's some kind of error regarding graphics benchmark results there, since Touch Pro has the same CPU, the same 3D accelerator and more RAM !
seether said:
I really think there's some kind of error regarding graphics benchmark results there, since Touch Pro has the same CPU, the same 3D accelerator and more RAM !
Click to expand...
Click to collapse
Someone could give it a try with another video. I don't have a TP yet ot I'd try it.
Basically I want to be able to throw a 600mb, VGA resolution file from my computer straight onto an SD card and watch it on the go without having to bother about conversions. Is this not possible?
mike freegan said:
Someone could give it a try with another video. I don't have a TP yet ot I'd try it.
Basically I want to be able to throw a 600mb, VGA resolution file from my computer straight onto an SD card and watch it on the go without having to bother about conversions. Is this not possible?
Click to expand...
Click to collapse
I havent tried this yet, but I will once I get back home tomorrow.. Would be awesome if that worked!
EDIT: Loading in a episode of Dexter (original release, DVDScr.XVID) on, and installing TCMP.. Il post results!
Loaded "Dexter.S03E01.DVDScr.XviD-NOTYOU.avi" onto my memory card and played it in TCPMP and it worked more or less flawlessly!! No need to worry about playback performance! Although to get 100% perfect playback, it should be converted or something as the playback did suffer som slight stutters from time to time.
EDIT: The only thing this device suffers from in terms of video playback is 65k colors.
err that's weird look at the results posted at these sites:
http://img2.portavik.net/upload/file_23/37bd53de9a906fe4/table_bench.gif
and this one:
http://www.ferra.ru/online/communicators/80844/ (in the middle of a page SPB test
Guys sorry, but what are u trying to play in Raphael, that this device is not so powerful for you?
I watched almost 20 movies (DivX for PC) / series on Raphael and withou any problem. Video is smooth, great and thats it...
P.S. I am watching movies on CorePlayer
MaRaHoX said:
Guys sorry, but what are u trying to play in Raphael, that this device is not so powerful for you?
I watched almost 20 movies (DivX for PC) / series on Raphael and withou any problem. Video is smooth, great and thats it...
P.S. I am watching movies on CorePlayer
Click to expand...
Click to collapse
When I tried to load up Dexter.S03E01.DVDScr.XviD-NOTYOU with CorePlayer, I only got audio, no video... But TCPMP worked quite well..
yeah im searching for proper video settings to convert files to for my device using catalyst or pocketdivx encoder, still searching on that one.
but then i tried just throwing my original episode of entourage and yeah it looks awesome., will probably do that more often with the faster file transfer and once i get a bigger sd card.
The firmware drivers do need a bit of work and coreplayer 1.2.5 doesn't fully support the touch pro as the makers have made clear.
I would suggest waiting for coreplayer 1.3 and maybe a few newer ROMs before giving final judgement, though Qtv specs on the qualcom chips do say it maxes out at 640x480 15-30fps 384kbps if i remember right.
FYI: Qtv is a software codec specifically designed for maximum performance on the 7201a chipset used by the touch pro. This is what coreplayer does not fully support yet (unlike on the TyTN).
Also, regarding HTC's response, why don't you ask the same question again but about the Touch Diamond, as it's not a business device.
seether said:
I really think there's some kind of error regarding graphics benchmark results there, since Touch Pro has the same CPU, the same 3D accelerator and more RAM !
Click to expand...
Click to collapse
What 3D accelerator does the Pro/Diamond use? What chip?
NOTE: USE OF THIS THREAD AND INFO ASSUMES YOU HAVE LEGAL AUTHORITY TO USE / ENCODE ALL SOURCE MATERIALS. I AM A US CITIZEN AND A SOLDIER, AND HENCE FALL UNDER JURISDICTION OF MANY ORGANIZATIONS, TO INCLUDE THE FEDERAL CENSORSHIP CLUB (FCC) AND THE DOUCHEBAGS MOLESTING CONSUMERS ACT. NO QUESTIONS WILL BE FIELDED REGARDING RIPPING, DOWNLOADING, OR PIRATING OF SOURCE MEDIA, REGARDLESS OF THE INQUIRER'S NATIONALITY. - Fathead, P.I.
This thread will be about video encoding, with the end product being the Raphael. My current Device, Radio and ROM are in my sig and updated for reference.
The premise of this guide: Using freely available (NON-WAREZ) CODEC and software, the user will be able to create video with audio playable on a HTC Touch Pro. The video will be of a watchable quality and small in file size.
Some of you may be familiar with my work on SEGA Dreamcast with GypPlay, DC-Divx, DC-VCD standard, and XDP (X-Rips, Inc. Dreampassport, English translation of DP 2 and above)
- Fathead, P.I.
----- START OF THEOREY -----
If you're like me, the first thing you asked yourself after buying your Fuse was "HOLY ****! I can run 4x the storage on this thing that my old Wizard could!" Yes, 16 GB of Micro-SD goodness is freakin' sweet. But how to use it? You can only listen to so much music per week, even with Napster To Go. You can only play so many games. (I'm further reduced due to lack of a usable joy pad for Pocket Nester.) Why not throw some movies on this joker?
----- VIDEO FORMAT -----
The first thing most people want to know is "What resolution and format should I use?" I am a longtime fan of Divx. I have used it to successfully create video content for low end devices, specifically the SEGA Dreamcast. Creating or downsampling content for a mobile phone gives us a considerable edge over bigger-screen counterparts. Before we jump into the configuration of settings and knob-dicking with software, let's figure out just what kind of video we want to produce.
FRAME RATE
Most content you find will come in one of 3 frame rates:
30 FPS (VHS / NTSC Broadcast / DVD / Blu-Ray(?) )
25 FPS (PAL)
23.976 FPS (Actual frame rate used to record cinema and produce much media)
The first thing you need to realize is that many things initially encoded in 30 FPS can be converted back to 23.976 FPS with no loss of fluidity or data. If your source is a webcam, skip the scaling to 23.976 and drop down to frame decimation. If your source is film, you're in luck. The other frames are just dummy frames that waste a little data. Deleting those frames frees up more video data to better express the picture information in the other 23.976 frames. This trick allows you to:
A. Use a lower bitrate (and hence smaller file) for the same picture OR
B. Get a better picture at the current bitrate
To figure out the frame rate, load up your file in V-Dub and go to File - File Information. The Data Rate box in the Video Stream area will tell you current bit rate, while frame size will give you resolution and frame rate. If you have a 23.976 FPS source, continue. If you have a 30 FPS source that you think should be 23.976 FPS (Film, etc) :
1. Load up the file in V-Dub.
2. Go to the Video drop down menu. Select Frame Rate (CTL+R is shortcut)
3. Change the Frame Rate on the source to 23.976 FPS.
If you continue to have audio sync issues with this method, leave the file at 30 FPS and continue.
Now we are going to look at frame decimation. Frame decimation drops every X frame while keeping the audio sync'd. The end result is a file X the frame rate of the source. While this is noticeable on large screens, on the Touch Pro / Diamond Screens (and probably even the HD), it shouldn't be an issue at all. You can play with this option. It is more noticeable on film, but I cannot see a difference at all on animated sources.
I use the decimate by 2 option in VDub. Video -> Frame Rate (CTL+R shortcut) and select Decimate video frame rate by 2. Our output video is now half the frame rate of our source. The end result is we can:
A. Get a better picture with the current video bit rate OR
B. Lower the video bit rate to get the same picture in a smaller size.
I use option B. Another big advantage here is that the device is trying to decode half the frames. A general rule about audio and video playback: The lower the bit rate you ask the device to handle, the less work it has to do to decode and display the video, and less battery power will be used.
RESOLUTION
Most content you will find is around 640 x 480. DVD sources usually come around 720x480. Blu-Ray would be above that, but possibly scaled down. We are going to watch this movie on a 3 inch screen. Guess what that means? If we never found a video about 320x240, or comparable widescreen resolution, It wouldn't matter. At all. Stepping up to 640x480 is just going to quadruple the amount of pixels we are trying to express on a limited budget.
A handy tool I use in V-Dub is the 2:1 reduction filter (high quality). To kick kit on, go to Video -> Filters (CTL+F). Click add, and it should be the first filter you can choose. This cuts your resolution by half. As a rule of thumb, If I've got a source that's around 640x480 (or 16:9 equiv) or higher, I hit it with the 2:1. You'll find oddball sources like 480 x 360, you can give it a shot, but it might not be worth it. Again, lower resolution means less pixels to express both in bit rate and in reproduction (playback).
Pausing here again, tired as hell.
THE SOFTWARE I USE
Video Editing / Audio and Video Compression and Mux - Virtual Dub. Totally free. I usually refer to this as VDub.
Home
Download
Audio Compression CODEC - LAME MP3 - Free and versatile.
Home
Compiled Binaries
Use the ACM Binary here for Windows and Virtual Dub
Video Compression CODEC / PC and SP/PPC Player - Divx - Decoder, player, mobile player, and MOST of the Encoder are FREE. DO NOT POST ABOUT CRACKING THIS.
Home / CODEC and PC Player
MOBILE (PPC and SP) Player
One more for good measure...
Okay, replies and requests, go!
Am I correct in thinking that videos should be encoded in 640 x 480 ?
*RESERVED*
cucusoft
i use Cucusoft Ultimate DVD + Video Converter Suite
mpeg-4
video bitrate 600kbit/s
framerate, depends from 23.976 to 25 (not important)
videosize 480x368
format 4:3
audio aac
128kb/s
samplerate 48000k
2 chanels stereo
it works fine, no framedrops
played with coreplayer 1.25 build 4506
I just use the standard 700mb divx movie in .avi
I use the free divx player V0.91
Smaller would be sweeter.
Taking a break for a bit, added some new material. Internets in the hotel are barely functional.
I'll be focusing on getting files down to smaller levels. The theorey should give you enough information to start dramatically cutting your file sizes. I've been moving my Boondocks DVD over to Divx 6.8 movies. Averaging 40 megs per episode.
I have been using spb mobile dvd for a few years now. It is very easy to use can convert straight from a dvd or a video file and supports vga res.
Will have to check that one out, have been thinking about backing up my DVD's to mobile, will be traveling about 26 - 30 weeks out of the year and need some boredom killers.
Gonna score some sleep and SEGA time, later all.
Added some new info, taking a pre breakfast nap.
i use slysoft clonedvdmobile. output at vga res and filesize around 700mb seems to run fine for me...although its not free, its well worth the money
Brendo said:
i use slysoft clonedvdmobile. output at vga res and filesize around 700mb seems to run fine for me...although its not free, its well worth the money
Click to expand...
Click to collapse
This is a great bit of software. It also utilises all 4 cores on my Q6600. Another fantastic program is DvDFab which can transcode DVD to Divx/Xvid/MP4 etc on the fly, or dump the Video TS to your HD.
Going to have to check all this out. Have many a DVD that needs ripped. Wonder if any of those have a frame decimation feature. I like my 30 - 40 meg per episode cartoons.
Based on some comments in other threads, I've tried a couple of freeware programs to try to encode in the format that works so well with WMP (MP4, H.264, 640x368, 1000 Kbps, AAC @ 96Kbps): DVD Decrypter + SUPER for one and AutoMKV for the other. However, I haven't been fully successful with either, so I'm hoping that someone who uses these tools can clue me in on the appropriate settings and procedures for encoding.
The combination of DVD Decrypter and SUPER creates very nice movies for playback on the Fuze. Unfortunately, DVD Decrypter keeps the VOB structure from the DVD and SUPER follows suit, which means that a movie will be broken into several pieces at arbitrary points: unsatisfactory, to say the least. The SUPER support forum mentions a way to join inputs into a single output, but following what I understood those instructions to say did not, in fact, result in a combined file.
AutoMKV is very convenient, as it is a single program (or at least UI) to both rip and encode. Unfortunately, I haven't found the settings that generate output that is comparable to the SUPER output -- WMP won't play any of the files I've managed to create so far.
Anybody use these successfully and can share how they do it? TIA.
amerisoft, works very well for me so far, except an occasional blank screen
Just wanted to add...
I don't bother encoding video anymore. Sure, a full-blown 50 minute xvid show might be 400meg. However, the touch pro does not have any issue playing such files back.
Makes life much easier!
I'd agree. I've loaded up a couple of 700MB XVIDs and had no problem playing them.
For some reason, my Sprint Touch Pro has issues playing back even reasonable quality video. For instance, 640x480 video at 1200k (MP4) is a little choppy in WMP, and almost -everything- is extremely choppy in TCPMP, no matter how it's encoded, including 350MB 45-minute XVid TV shows.
AndyCR said:
For some reason, my Sprint Touch Pro has issues playing back even reasonable quality video. For instance, 640x480 video at 1200k (MP4) is a little choppy in WMP, and almost -everything- is extremely choppy in TCPMP, no matter how it's encoded, including 350MB 45-minute XVid TV shows.
Click to expand...
Click to collapse
As I understand it, it's a driver issue. (This is what I've gathered across numerous postings here; someone please correct me if I've gotten something wrong.) The Qualcomm chipset in the TP/Fuze has an efficient driver called Qtv, but Qualcomm charges for a license. WMP appears to incorporate the driver, so it's able to handle moderately challenging videos. 1200 Kbps might be a little more than it's capable of displaying smoothly, but people have reported that 1000 Kbps plays well. On my one trial with DVD Decrypter + SUPER, that was the case for me, too -- full resolution and smooth motion for a video ripped from a DVD with the specs I reported in my earlier message in this thread.
TCPMP, on the other hand, does not include the Qtv driver, so in order to get smooth playback you have to reduce the size, resolution, or frame rate.
Coreplayer has a reverse-engineered partial driver for Qtv. As a result, it falls between TCPMP and WP in capabilities. It is claimed that version 3.0 of Coreplayer will have full Qtv support.
can anybody tell me which program can I use to convert .avi files to .mp4 files in best resolution supported by hd2 ? As far as I know Mp4ForHd converts only files to touch hd resolution so as I asked before, which program can be used to convert to mp4 and in which resolution? And my second question - in upper right corner there should be a litle icon which allows me to disable running aplications - I don't have it, how can I turn it on ?
Well, the Touch HD and HD2 have the same screen resolutions (they are both WVGA) despite the size differences. I have used MP4forHD and find that the audio/vidio sync is out on the HD2. I tend to use Any Video Converter which is freeware and allows for much greater customisation to suit your needs, and have yet to find any sync issues. Be sure to keep the video bitrate <= 2000 as values above this start to effect the framerate/ playback smoothness. Also, it is best to keep the resolution at WVGA otherwise you will increase the chance of exceeding the 2GB file size limit. Anything file size above this the HTC Album program wont play (i'm assuming this is what you want to use?).
i use Super i think its the best freeware
http://www.erightsoft.com/SUPER.html
Hi.
Try this one http://forum.xda-developers.com/showthread.php?t=478050&highlight=converter
Its very easy and fast
MfG Uro
Version 2.9b:
- A new codec added "XVID avi". With this, you can now convert to avi files (not only mp4 files)
- Now video quality 'very high' is two times Normal Quality (before 1.5 times). It makes max quality is now 1600 kbps (before 999 kbps)
- Support for MOD video files (JVC cams)
- Added a new video size 768x576 (JVC cams)
- Added two new profiles: HD2 (for HTC HD2) and JVC (for JVC cams)
Ive installed version 2.9c and I cant see HD2 profile...
m4rioo said:
Version 2.9b:
- A new codec added "XVID avi". With this, you can now convert to avi files (not only mp4 files)
- Now video quality 'very high' is two times Normal Quality (before 1.5 times). It makes max quality is now 1600 kbps (before 999 kbps)
- Support for MOD video files (JVC cams)
- Added a new video size 768x576 (JVC cams)
- Added two new profiles: HD2 (for HTC HD2) and JVC (for JVC cams)
Ive installed version 2.9c and I cant see HD2 profile...
Click to expand...
Click to collapse
you need to download the 2.9c update and unzip to the instalation folder
ok, anyone knows answer to my second question?
m4rioo said:
ok, anyone knows answer to my second question?
Click to expand...
Click to collapse
I have Profile HD2 under Profile
MfG Uro
The video and sound.. they're not in sync when i used the mp4forhd.. any solution for that?
'And my second question - in upper right corner of my hd2 there should be a litle icon which allows me to disable running aplications - I don't have it, how can I turn it on ?'
sorry for second post but I cant input any file while editing existing post, so - i ment this:
m4rioo said:
sorry for second post but I cant input any file while editing existing post, so - i ment this:
View attachment 286110
Click to expand...
Click to collapse
Try this cab , Its called Task manager , this is one is made by Dutty for HD2
http://forum.xda-developers.com/attachment.php?attachmentid=284213&stc=1&d=1266797843