Related
Hey guys
New to TouchFlo - got it installed yesterday.
Having an issue though.
When I open it, by clicking the taskbar button, or in Start, it opens up.
When i want to go back to Today screen, I swipe up on it to toss it away, or even if i hold the right taskbar button to close it, it goes away.
If i try to access it again, nothing happens. screen stays on Today, but is not functional unless i press the END key, as if an invisible FLO is over the screen
Whats up here?
here is what i flashed yesterday
T-Mobile 2.26 ROM : MDA_software_update_226102_22610105_022511.exe
T-Mobile-UK_2.19.11_Radinly
NBD.v7.9
running old AT&T blue network on 8125
installed apps:
A_C Slide2Unlock
Xplore Keyboard
Today Agenda
Pocket Alarm
Nyx Password
Device Lock
Contact Manager
MhoairSofa Calendar+ Today Plugin
BatteryStatus (using this to overclock to 260mhz.)
PocketSoft ToggleBT
I had the iphone phonepad and stuff installed, but i couldnt figure out how to switch back to the Today screen without clicking SETTINGS, and still having iphone running. it was slow and laggy. any way around this?
thanks
I had same issue, only solution for me, was to stop using TouchFlo
Touchflo will only pull itself up the first time period...
Afterwards when you push the button to access it, it will appear nothing will happen... however if you swipe your finger as if you were turning the cube, it will infact go to the next page..... try it out
that is stupid!
any hopes of a fix?
The various versions of touchflo on wizard require you to press a button before getting touch to work. Depending on the ROM, this could be button 4 or left softkey.
HTC Tocuh has a video of Touch phone on their website. I see that even here, a button is pressed every time the touch features are accessed. This may be a feature of touch itself, rather than a bug in the way touchflo works on wizard.
kernelguy
danrw84 said:
that is stupid!
any hopes of a fix?
Click to expand...
Click to collapse
you can buy a touch.
man, think...
the touchFLO is hack for work on wizard....so is very hard to have this work perfect.
if you realy need the cube working 100% buy a touch
I found a cab somewhere on this forum that said that you could increase the speed when typing with the keyboard, it's called taiseers disable xT9, i didn't find any difference in the speed so I uninstalled the program, after that my manilla sms meny dissapeard.
The meny that im talking about is when you press the sms icon in manilla, and then there are 2 buttons in the bottom of the screen: More and Meny, when I press meny nothing appears...
Is there any way to get it back?
I use RomeOS Swe Rom if it matters.
Hello everybody
Today i flashed the new official rom on my topaz.
But i`ve got one little problem. When turning of the display the lockscreen doesnt activate automatically. So i first have to press start and then press lock.
Isn`t there another way? So when you turn of the display it automatically launches the lockscreen.
Thnx
Here you go:
http://forum.xda-developers.com/showthread.php?t=386451
JR_de said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=386451
Click to expand...
Click to collapse
Thnx.
I tried it but it doesnt work...
there is a reg edit to lock the display when the screen dims.
Can't remember where it is but it's lockenable under control/backlight i think..
It will auto lock when you turn off the display as well...
Just use some reg editor and search for "lock", you'll probably spot the key you're looking for.
I use http://montecristoff.webs.com/diamondtweak.htm and there I activated automatic lock, and everytime I press the power button the phone locks and the lockscreen is on. Hope that helps.
DjangoBE said:
Hello everybody
Today i flashed the new official rom on my topaz.
But i`ve got one little problem. When turning of the display the lockscreen doesnt activate automatically. So i first have to press start and then press lock.
Isn`t there another way? So when you turn of the display it automatically launches the lockscreen.
Thnx
Click to expand...
Click to collapse
This is what you're looking for: http://forum.xda-developers.com/showthread.php?t=542482
Thnx everybody...
Gonna try the different methodes.
DjangoBE said:
Hello everybody
Today i flashed the new official rom on my topaz.
But i`ve got one little problem. When turning of the display the lockscreen doesnt activate automatically. So i first have to press start and then press lock.
Isn`t there another way? So when you turn of the display it automatically launches the lockscreen.
Thnx
Click to expand...
Click to collapse
no need for any of these 3rd party apps, this was a major niggle of mine with 6.1 and 6.5.
Use RegEdit (if you have it by default with winMo 6.5) or use TotalCommander, navigate to the following registry option:
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable
and change the value from 0 to 1, save and exit.
Now when you use the TD2 power button on top of the device to turn of the screen it will automatically lock the device too.
Worked on my TD2 using original 6.1 ROM and the 6.5 Leo cooked ROM's from Dutty I have used in the last month.
this is well documented tip in these forums:
http://forum.xda-developers.com/showthread.php?t=570757
There is nothing like autodevice lock in official htc 6.5 rom. There is HKCU/controlpanel/backlight/locklevel. I changed the value from 0 to 1, soft reset and nothing happened. I`ll try some of diamond tweaks...
...sorry, double post...
Hi there, does anyone konw why after a period of time the lockscreen will only show upper half instead of full screen? Any solution there ? thanks.
easy solution
found it out the other day myself, but seemed to had lost this post lol
if you hold down the 'end call' key, that will lock the screen for you, save you having to go into start then lock
6.5.1 Build 23504
\HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable
Toggle from 0 to 1
How can I change that in the register?
Do I need an app for that?
.joeri. said:
How can I change that in the register?
Do I need an app for that?
Click to expand...
Click to collapse
As I mentioned back in post #9 you can use RegEdit in WinMo 6.5 or download and install TotalCommander to edit the registry, there are many other registry editing tools out there as well just, search for them
arcticbill said:
6.5.1 Build 23504
\HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable
Toggle from 0 to 1
Click to expand...
Click to collapse
Works for me Dutty 6.5 Leo HG R1
I just tried a lot of key-combinations and I got one that works (for me...).
If you press the home key (don't release it) and then press the powerbutton. Now it will normally lock the device.
(It works for me, on WM6.5, original HTC rom.)
arcticbill said:
6.5.1 Build 23504
\HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable
Toggle from 0 to 1
Click to expand...
Click to collapse
I tried that. It is OK to lock the mobile when the backlight dims or when putting the mobile to sleep.
But I wouldn't autolock the screen when the backligt dims, only when putting the mobile to sleep (manually or automatically). A solution generally for WM6.5 or particularly for Topaz - Duttys ROM?
can u help my problem?? i have polaris 2nd hand
my polaris dont have "touch keypad" & "touch keyboard" at input panel. how to solve this problem. thx
hellloo...
Do first soft reset, if don't help do a hard reset. I have same problem after installing new Rom, after restart the keyboard was fixed.
I can't too. I installed Touch-keyboard-keypad, Registry Enable HTC Keypad, as well as Finger Keyboard 2.1. I am able to select it, but it will return to normal keyboad. Touch keyboard and keypad shows not effect no matter how many times I'd selected it. I'd tried restart and restart, install reinstall.. it never seems to work. I went to SIP change too... everything seems ok while setting.. but the Touch keyboard and keypad never comes out.
Sigh... whole morning of setting it after flashing a new 6.5 rom... it's... really tiring...
I flashed another 6.5 rom before with those mentioned above, and it works well... im not sure.. why isn't it functioning this time.
anyone can help in this?
Hello, I am using WM 6.5 with Manila 2.5.
I use Second Today, as well, in order to use iPhone Today as a program launcher (as the programs tab is missing in Manila 2.5).
I would like to set a softkey in Second Today that brings me to (manila) "home".
Can somebody help me?
Many thanks
steami said:
Hello, I am using WM 6.5 with Manila 2.5.
I use Second Today, as well, in order to use iPhone Today as a program launcher (as the programs tab is missing in Manila 2.5).
I would like to set a softkey in Second Today that brings me to (manila) "home".
Can somebody help me?
Many thanks
Click to expand...
Click to collapse
I think you need to assign it to SToday Quit. I think you can change it in the SToday Settings program.
mitsi said:
I think you need to assign it to SToday Quit. I think you can change it in the SToday Settings program.
Click to expand...
Click to collapse
Thanks, I already tried this solution but this way Second Today unloads from memory and then if you launch it again you must wait a bit to load it. It is not a big problem, but I would prefer to maintain it loaded and have a switch to (Manila) home. Unfortunately I do not know which parameters I should use.
Ok, I understand. I have the same program and the same issue. I usually go back to the home screen by pressing the bottom right hard button "home" or phone red key. Alternatively you can press the top right "OK" softkey.
Sometimes you may want to exit Second Today, so I have assigned the softkey to do this. If you really want to NOT exit Second Today and assign a softkey, then look here: http://forum.xda-developers.com/showthread.php?t=416688.
I hope this is the solution for you.
steami said:
Hello, I am using WM 6.5 with Manila 2.5.
I use Second Today, as well, in order to use iPhone Today as a program launcher (as the programs tab is missing in Manila 2.5).
I would like to set a softkey in Second Today that brings me to (manila) "home".
Can somebody help me?
Many thanks
Click to expand...
Click to collapse
Second Today has a soft key setting doesn't it?
I use it and toggle my left softkey between Second Today and manila
Manila Soft Key settings are under HKLM\Software\HTC\Manila
Bruce Inman said:
Second Today has a soft key setting doesn't it?
I use it and toggle my left softkey between Second Today and manila
Manila Soft Key settings are under HKLM\Software\HTC\Manila
Click to expand...
Click to collapse
Thanks, I know how to set the softkey in Manila to switch to Secon Today, my problem is what to put in the left softkey in Second Today to switch to Manila home...
steami said:
Thanks, I know how to set the softkey in Manila to switch to Secon Today, my problem is what to put in the left softkey in Second Today to switch to Manila home...
Click to expand...
Click to collapse
In SecondToday softkey settings select left key and manila and apply to registry.
If your Manila soft key is set to Second oday, this should toggle between the 2.
mitsi said:
Ok, I understand. I have the same program and the same issue. I usually go back to the home screen by pressing the bottom right hard button "home" or phone red key. Alternatively you can press the top right "OK" softkey.
Sometimes you may want to exit Second Today, so I have assigned the softkey to do this. If you really want to NOT exit Second Today and assign a softkey, then look here: http://forum.xda-developers.com/showthread.php?t=416688.
I hope this is the solution for you.
Click to expand...
Click to collapse
Thanks, I have tried the solutions proposed there but none works.
Maybe I am doing something wrong...
Instead of selecting manila in softkey settings, try selecting 2nd today. Should work.
Bruce Inman said:
In SecondToday softkey settings select left key and manila and apply to registry.
If your Manila soft key is set to Second oday, this should toggle between the 2.
Click to expand...
Click to collapse
I do not understand.
Which version of Second Today are you using? Mine is 0.4.3.
This version gives the possibility to show and modify the softkeys both of Second Today and of Manila.
I have radio buttons to the left, one for Left Key and one for Right Key.
On the right I can chose among Second Today, Manila 3D and Manila 2D Keys.
Based on the combination of selections you can change either the softkeys in Manila or in Second Today. But there is no option to bring you to Manila.
There is no way to do what you say, or at least I do not understand...
steami said:
I do not understand.
Which version of Second Today are you using? Mine is 0.4.3.
This version gives the possibility to show and modify the softkeys both of Second Today and of Manila.
I have radio buttons to the left, one for Left Key and one for Right Key.
On the right I can chose among Second Today, Manila 3D and Manila 2D Keys.
Based on the combination of selections you can change either the softkeys in Manila or in Second Today. But there is no option to bring you to Manila.
There is no way to do what you say, or at least I do not understand...
Click to expand...
Click to collapse
I am running Ver. 0.4.0.
Remove all keys and start from scratch.
Select "Left Key" and "Second Today"
Title it whatever you want, I just use "Today".
Apply to registry and it should toggle.
Bruce Inman said:
I am running Ver. 0.4.0.
Remove all keys and start from scratch.
Select "Left Key" and "Second Today"
Title it whatever you want, I just use "Today".
Apply to registry and it should toggle.
Click to expand...
Click to collapse
Thank you for your patience, but what should I put in "Path to program:" ?
If I do not put anything there it does not work, I simply get the name of the softkey but pressing it gives me an error message and nothing happens...
Unless there is some difference between 0.4.0 and 0.4.3 at this regard
steami said:
Thank you for your patience, but what should I put in "Path to program:" ?
If I do not put anything there it does not work, I simply get the name of the softkey but pressing it gives me an error message and nothing happens...
Unless there is some difference between 0.4.0 and 0.4.3 at this regard
Click to expand...
Click to collapse
My path points to Second Today
"\Program Files\SecondToday\SecondToday.exe"
Same way in my reg for HKLM\Software\HTC\Manila.
Bruce Inman said:
My path points to Second Today
"\Program Files\SecondToday\SecondToday.exe"
Same way in my reg for HKLM\Software\HTC\Manila.
Click to expand...
Click to collapse
Great! It works!
Many, many thanks
I did not understand before...
No prob.
Intuitively you would think that SecondToday softkey would be set to manila and visa-versa, but both actually have to be set to Second Today to toggle...
Glad you finally got it working.
Bruce Inman said:
No prob.
Intuitively you would think that SecondToday softkey would be set to manila and visa-versa, but both actually have to be set to Second Today to toggle...
Glad you finally got it working.
Click to expand...
Click to collapse
Thanks Bruce, I didn't know that but as you say, it is not obvious!