Database Info

MMS

Hi , I have the 750v unlocked and using it on my T-mobile account . I have everything working ;WAP,Internet, Email etc, but I cant send an MMS it gets to 90% then hangs.
I have copied as best I can the MMS settings from my prophet to the MMS setup in the new SMS/MMS program but it doesn't seem to work. Can someone , thread underneath the MMS operator settings within their TREo SMS/MMS application so that I can figure what I'm doing wrong.
Thanks in advance
PS not sure if you knew this but this stops the security questions when installing software its the same as I use on my prohet and is HTC signed .

Help MMS!

Hi All,
I recently upgraded to WM6 using midgets build. I have found now that when recieving MMS they all come through as 5kb and are tiny. I have tried sending small files like 50kb to myself and they come through at 5kb too. this also happens when it gets sent from another phone to my phone.
I have checked on the other devices that the compression is disabled but still no joy. Was wondering if anyone is having the same problem? If so is there a solution? Other than this the WM6 version is very good.
Would appreciate some help.
Thanks

Hi Wolfie,
Are you sure you're using the same MMS settings you used before..? because I used both Midget's and Ivan's ROM and they both seem to have MMS working fine. I tried sending 80kb (with audio, picture and text) MMS messages to myself and I can receive the entire thing.

Hi Thanks for replying.
I'm pretty sure i'm using the same settings? What settings are you using? I am on O2 if that helps. Is there anywhere i can find the optimal settings?

Courtsey of O2 support.
----
Please note the following:
When entering 'o2' please use the letter 'o'.
Replies to this email cannot be answered. If you have any further queries about this email please call Customer Service.
Please find the settings below for 'O2 XDA Exec MMS Pay Monthly Settings':
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Regards
O2 Customer Service
Please note that replies to this email cannot be answered. If you have any further queries about this email please call Customer Service.

hi uatec,
thanks for the settings, i tried this and still no joy!!! I can send to other phones ok but when recieving it comes very small?? I'm confused

Uhmmm... how about Photo Resolution under MMS Configuration-Preferences? Is it set to original? Have you tried playing around with the WAP version under Servers?

yep it is set to original resolution, i have tried both wap stack settings. I just reflashed the rom and still have the problems? i also tried using the settings.cab that was talked about in the other forums, still no joy. Maybe i will just ahve to stick with recieving 5kb MMS!!!

UPDATE!!
i reflashed with Ivans rom and MMS is back working again? So it must be an issue with Midgets rom? or compatability with my phone? Very interesting any thoughts as to why?

My problem is exactly the same - incoming (even selfesent MMS pictures) are coming to me with MAXIMUM size of 6KB. I use Jwrightcmp's WM5 AKU3.2 1.90.96. I put a note in relevant thread. Incoming pictures are always resized to 128x119, without any sence what resolution was the originally. Settings regarding foto in MMS composer seems to be only related to outgoing fotos but not for incoming.

Treo 750 MMS problem please help

I seem to be experiencing a problem with sending and receiving MMS. I checked all the MMS settings on the cingular site and they are correct. I compose an MMS and it goes to the outbox and never attempts to send it. After a while of checking it in the outbox an envelope appears with an arrow scrolling over it with a percent complete to the left of it but it stays at 0%. If anyone else is experiencing this problem or know any solutions your assistance would be greatly appreciated. Thanks in advance.

I don't know if your settings are right. But at the HTC website you can download a cab installer for each country and provider that adjust the right settings for you about mms and so on.

Problem solved figured out that it was not the actual MMS settings on the device but Expressmail was somehow preventing the MMS from being sent out. I had to uninstall xpressmail and now the MMS works like a charm. Now just have to find a way to connect to my corporate email.

luminus said:
I don't know if your settings are right. But at the HTC website you can download a cab installer for each country and provider that adjust the right settings for you about mms and so on.
Click to expand...
Click to collapse
Can you pls tell me which website is it ? Cant seem to find.

http://www.europe.htc.com/support/software/htcp3600.html
Found it on Europe HTC site.
I do have a palm treo but just choose any phone and the page will show up where you can download this software.
It seems that they only cover europe.

No signal on incoming SMS

Hi there!
I installed the German WM6 and I have seen a thred, where they write how to fix the problem, that there is no signal on incoming short messages.
But, sorry I can`t find it again
Anybody who can help?
Greetz
Gary

garybusch said:
Hi there!
I installed the German WM6 and I have seen a thred, where they write how to fix the problem, that there is no signal on incoming short messages.
But, sorry I can`t find it again
Anybody who can help?
Greetz
Gary
Click to expand...
Click to collapse
u reflash an official rom its fix the problem.

You have probably disabled the threaded sms option. I can't remember the key right now but you can search this forum to see how you can disable/enable threaded sms and edit the registry key with your prefered registry editor. HTH

Found this somewhere in the Forum:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\SMSInboxThreadingDisabled
DWORD
value set to 1.
You have to create the OEM folder yourself but apart from that it seems to work okay.
My signal now works

XL3N7 said:
You have probably disabled the threaded sms option. I can't remember the key right now but you can search this forum to see how you can disable/enable threaded sms and edit the registry key with your prefered registry editor. HTH
Click to expand...
Click to collapse
I have the same problem like garybusch. When the threaded sms option is enabled, the incoming message sound works. But in the threaded sms view you can't see how many signs you already wrote. In Germany you have to pay for another sms, after 160 signs.
So i would like to have the old view, where i can see the number of signs.
Seems like there is no way to enable the sound for an incoming sms in this view, right?

I don't have my wizard in hand right now.
Check this out http://forum.xda-developers.com/showthread.php?t=382548 hopefully it will work.

Thank you so much scubadiver and XL3N7! The sounds now working for me

HTC FUZE add to Contacts pop-up, how to disable?

Is there a way to disable the "add to contacts" pop-up the occurs when a call is ended with a party whos phone number not currently in contacts? I called my help desk and they said sure, just select the automatic add to contact selection in phone options and volia no more pop-up, I said thanks but I don't want to have every telemarketer and political call phone mill stored as contacts.
I hunted around in the registry and found "currentuser\controlpanel\phone\storecontact" This looks like it could be it, but I can not find any info that confirms after searching.
Can anyone help, will this key do the trick and what should I change the setting to?
Thanks!
my device att fuze
WM 6.1 Pro
CE OS 5.2.20771 (build 20771.1.4.6)