Related
Hi all,
I was wondering if anyone had a tutorial to do a full XIP Port for the kaiser. I found a few, but none of them changed my CE OS Build #, which supposedly a full port would do. Can someone point me in the right direction? I've read Garmin's, but I need to know all the XIP addresses for the kaiser...
Thanks in advance
mbarvian said:
Hi all,
I was wondering if anyone had a tutorial to do a full XIP Port for the kaiser. I found a few, but none of them changed my CE OS Build #, which supposedly a full port would do. Can someone point me in the right direction? I've read Garmin's, but I need to know all the XIP addresses for the kaiser...
Thanks in advance
Click to expand...
Click to collapse
The same by me...
I need this too
now i really need this, as it seems the ervius' tools are not compatible with the kaiser...
does anyone have a solution to this?
Im with you...the XIP Pictorial does not work correctly with our systems. FOr some reason the Chefs' that know how to do this won't help?
ryncppr said:
Im with you...the XIP Pictorial does not work correctly with our systems. FOr some reason the Chefs' that know how to do this won't help?
Click to expand...
Click to collapse
that's my thinking EXACTLY
although I don't blame the chefs
i've looked all around, but there do not seem to be any for the kaiser?
sorry for the bump guys
build No. is in 723fb954-d931-4348-b672-82a188e587b5.dsm, for full xip port u need replace all files and modules in MSXIPKernel and MSXIPKernelLTK.
txt files needn't
Here's the method...
Here's the method I'm using. It's works perfectly but sometimes, you can't doing a FULL xip port because some modules are very hard to port.
http://forum.xda-developers.com/showpost.php?p=2263798&postcount=13
Thanks to ervius for giving us the way...
MickyMax said:
Here's the method I'm using. It's works perfectly but sometimes, you can't doing a FULL xip port because some modules are very hard to port.
http://forum.xda-developers.com/showpost.php?p=2263798&postcount=13
Thanks to ervius for giving us the way...
Click to expand...
Click to collapse
thanks for that link man, i've never seen it before
i will probably rewrite the tutorial so it's much easier to understand and completely made for the kaiser (if it works, of course)
thanks again
EDIT:
actually, I can't really understand his writing (he's not a grammar expert, no offense )
can someone else re-write it in plain and simple steps?
sorry for the second bump ...
sorry again guys
I just tried the above method, and I STILL CAN'T GET THE CE OS NUMBERS TO CHANGE
has anyone been able to port an XIP and get the CE OS numbers to change using kaiserkitchen ?!?!
mbarvian said:
sorry again guys
I just tried the above method, and I STILL CAN'T GET THE CE OS NUMBERS TO CHANGE
has anyone been able to port an XIP and get the CE OS numbers to change using kaiserkitchen ?!?!
Click to expand...
Click to collapse
to changes os number, you just need change 723fb954-d931-4348-b672-82a188e587b5.dsm and .txt file
realocp with xipport then write it back to os.nb.payload
abusalza said:
to changes os number, you just need change 723fb954-d931-4348-b672-82a188e587b5.dsm and .txt file
realocp with xipport then write it back to os.nb.payload
Click to expand...
Click to collapse
hmmm
could you elaborate on this a little more ?
mbarvian said:
hmmm
could you elaborate on this a little more ?
Click to expand...
Click to collapse
yap. extract xip.bin from os.nb.payload. dumped your xip.bin with xipport, write maps. copied 723fb954-d931-4348-b672-82a188e587b5.dsm and 723fb954-d931-4348-b672-82a188e587b5.dsm.txt from other build as like you want and overwrite into out\files. realocp one time (if you get error blah blah... don't care about it. build xip_out.bin and write xip_out.bin with address 03200000 to os.nb.payload
hope this will help you out
abusalza said:
yap. extract xip.bin from os.nb.payload. dumped your xip.bin with xipport, write maps. copied 723fb954-d931-4348-b672-82a188e587b5.dsm and 723fb954-d931-4348-b672-82a188e587b5.dsm.txt from other build as like you want and overwrite into out\files. realocp one time (if you get error blah blah... don't care about it. build xip_out.bin and write xip_out.bin with address 03200000 to os.nb.payload
hope this will help you out
Click to expand...
Click to collapse
thanks a ton man, will definitely try!
thanks again
mbarvian said:
thanks a ton man, will definitely try!
thanks again
Click to expand...
Click to collapse
your welcome, man... please tell me if this work
I found a new XIP and SYS (build 20759) but they are chinese. I'm wondering can we porting them into English? Thanks
live4nothing said:
I found a new XIP and SYS (build 20759) but they are chinese. I'm wondering can we porting them into English? Thanks
Click to expand...
Click to collapse
You can port any XIP regardless of language, that I know off. It's the SYS that needs to be changed...
post the xip and sys, don't warry if it's in chinese!
live4nothing said:
I found a new XIP and SYS (build 20759) but they are chinese. I'm wondering can we porting them into English? Thanks
Click to expand...
Click to collapse
It's not that hard to do, so post it and we will get it going.
Hey guys, here is the SYS and XIP for 20759. Some says they they are fake, but I tried the XIP, it is really fast. Credit go to people in xbeta and 5dpda forum, having trouble translate their name
SYS (in chinese 0804):
http://rapidshare.com/files/154229631/20759.7z.html
XIP (already ported to herald, working fine with 20755 build in my wing):
http://rapidshare.com/files/154236065/XIP.7z.html
I appriciate anyone could help me port the SYS to english. Thanks
live4nothing said:
Hey guys, here is the SYS and XIP for 20759. Some says they they are fake, but I tried the XIP, it is really fast. Credit go to people in xbeta.cn forum, having trouble translate their name
SYS (in chinese 0804):
http://rapidshare.com/files/154229631/20759.7z.html
XIP (already ported to herald, working fine with 20755 build in my wing):
http://rapidshare.com/files/154236065/XIP.7z.html
I appriciate anyone could help me port the SYS to english. Thanks
Click to expand...
Click to collapse
Hi,
Before I get started with translating, have you ran into any issues using it yet?
ttran001 said:
Hi,
Before I get started with translating, have you ran into any issues using it yet?
Click to expand...
Click to collapse
Thanks Tony. For the XIP, running perfect so far for 4 days. But for the SYS I could not build it using my english OEM, so I don't know about it yet. From what I read in the xbeta and 5dpda forum, they says it working fine. All we need to do is to replace a registry key which point touch.dll instead of hwtouch.dll in order to get it to work.
Is there anything I can do to help the translating process? I read one post from Ivan saying we have to replace all the 0804 mui with 0409 and ITJE sugguested renaming the 0409 from an English SYS to 0804 from and then replace the 0804 on the target SYS. I tried ITJE's method, seems less work to me, but did not work. Do you have some tricks that you can share? Thanks
Hello my friend,
I search a kitchen ready for wm6.5 for the Elf/elfin.
Anyone have a link, or could upload the kitchen ( even if there is no sys/oem/rom folder)
Thanks a lot
regards,
Nixeus
just look at this
http://forum.xda-developers.com/showthread.php?t=509822
rendyzou89 said:
just look at this
http://forum.xda-developers.com/showthread.php?t=509822
Click to expand...
Click to collapse
That is a ROM, not a KITCHEN.
Nixeus, I had already answered your question a couple of times in the past.
http://forum.xda-developers.com/showthread.php?t=467488
I have seen your answer Dsixda, and than for this !
I knwo the Platformerebuilder kitche, but i would like to find an "old" kitchen with only the two batch ( buildnb.bat) and createrom
You can look for Beep's platformrebuilder. I use with multilenguage and multisystem and works goooood!!
Hi,
I have make a kitchen with PlateformeRebuilder, and my ELF don't boot .
I have already make a lot of wm6.1 rom with no problem, but in wm6.5 my elf don't booot.
Will be it possible than a person could share a wm6.5 kitchen for elf with oem,rom,and sys folder ?
It's not for publish my rom, but just in order to understand why my rom don't boot.
It will very great and nice to you
Thanks a lot,
Regards,
Nixeus
Nixeus said:
Hi,
I have make a kitchen with PlateformeRebuilder, and my ELF don't boot .
I have already make a lot of wm6.1 rom with no problem, but in wm6.5 my elf don't booot.
Will be it possible than a person could share a wm6.5 kitchen for elf with oem,rom,and sys folder ?
It's not for publish my rom, but just in order to understand why my rom don't boot.
It will very great and nice to you
Thanks a lot,
Regards,
Nixeus
Click to expand...
Click to collapse
Ok, I can give you my kitchen with various sys in WM 6.5, but i need to upload and send you a link by mp, maybe on monday ok? Do you need the OEM instead? I work in 0C0A and just have a basic OEM in 0409
It's very nice to you !
I work in 040C ( french) but it's not a problem
Thanks a lot !!!
hello humrod,
Thanks a lot for your kitchen.
Unfortunately i have an runtime error, it appear there is an error in a folder
Have you try to run the .bat with the 0409 file ?
Thanks a lot
Yes, in fact i cooked a 0409 rom and flash it in my touch, and flash well.
ok
So i don't understand why i have this error, according to the serahc engin on xda, this error is here because of an error in SYS or oem, or PKG, or ROm
Let's resume:
I give you Sys/OEM/ROM/ext folders, right?
You download the kitchen from Bepe's (dark forces team), rigth?
You actualize the Platformrebuilder.exe, right?
as i said, the runtime error becomes a xip error (rom folder), or maybe a payload error. Discharge others, because before send you the files, i probe to build a rom (0409 of course) and flash it on my elfin.
Did you change anything? did you use your old kitchen?
If you did all this, i suggest you ask bepe's directly.
Now i remember, just in case, if you edit wrong the BuildRom.bat cuold have this error.
Hello
I have use the plateforme rebuilder downloaded from the darforceteam website.
I don't have mae changes in the kitchen. Just run the.bat !
That's why i think there is a problem in the rom folder.
best Regards,
Nixeus
Nixeus said:
Hello
I have use the plateforme rebuilder downloaded from the darforceteam website.
I don't have mae changes in the kitchen. Just run the.bat !
That's why i think there is a problem in the rom folder.
best Regards,
Nixeus
Click to expand...
Click to collapse
Ok nixeus, maybe the problem is there. I sent you an edited bat with the patches to the folders in the structure i use. this bat is prepared too to work with the platformrebuilder.exe update
Humm ok, but,why i want to do ?
Sorry nixeus, i don't understand your question. Can you explain a little more?
oups, sorry, my question was : what i want to do ? ( I repeat thaht i didn't jave modify the .bat )
Thanks a lot
Ok, i'll upload the hole kitchen and send you the link. Then you can compare the files.
Well friend, here is it. You have to put all the files (the ones i send you before) and this ones in a nwe folder in C:
With this you obtain a basic 21806 wm 6.5 rom in 0409
I sugest you to keep this original, and copy the same with other name, it will work Ok, like other kitchen, and meka your changes there.
http://www.mediafire.com/?oxmxn2jvadj
Hey,
Thanks a lot my friend.
The rom build with no problem
Flash in progress
I can now try to understand why my kitchen didn't boot.
Thanks a lot for your help humrod
Im trying to build a custom rom for HTC apache, my question is the next
Who knows how to carry a xip and sys to .nbf roms? i find a tutorial to carry them to .nbh roms but isnt the same thing. I hope someone can help me thanks
Maybe you can do it with Hypercore
thanks but hypercore dosent works with htc apache, or im wrong.
Hi everybody i have a benq e72 and i flashed it many times. And now i want to cook a rom for special to me. Can someone who has got kitchen send me and tell me how can i cook a rom?
Sorry for my bad English. I'm Turkish.
I don't know how to Cook so don't ask me how, but I can provide you with the kitchen.
http://trinest.com/BenqE72Kitchen.rar
If you do figure out how to use it, release a rom based off the current build of Win Mobile, English etc. The community for the BenQ hasn't been updated for a long long time with a new release for various reasons.
Thank you so much I wish someone know how to use this.
Lotus-one said:
Thank you so much I wish someone know how to use this.
Click to expand...
Click to collapse
I know how to cook for this device, but i'm having problems porting the XIP i need help from someone who know how to use the xip for this device
I'm Almin from e72.eu I tried any ways but i can't port XIP Does someone know how to port XIP to benq e72?
Lotus-one said:
I'm Almin from e72.eu I tried any ways but i can't port XIP Does someone know how to port XIP to benq e72?
Click to expand...
Click to collapse
Upload e72 xip.bin and new xip.bin!
I will port it for you.
Spiaatie said:
Upload e72 xip.bin and new xip.bin!
I will port it for you.
Click to expand...
Click to collapse
You know what to do with the file os.nb (3mb) on ROM subfolder inside the kitchen??
Spiaatie said:
Upload e72 xip.bin and new xip.bin!
I will port it for you.
Click to expand...
Click to collapse
Oh thank you so much
Link http://www.4shared.com/file/209685311/d2262a25/XIPs.html
The new XIP is from your 23017 XIP
And could you tell me how do you port it?
Spiaatie? Could you tell me how could you port xip?
Try this one.
Copy files to ROM folder and insert in os.nb by running ''INSERT_XIP.bat''
To port XIPs you can use software from [here]
Thank you! It works but in Settings>About build is still 21812.
Lotus-one said:
Thank you! It works but in Settings>About build is still 21812.
Click to expand...
Click to collapse
Did you replaced SYS folder with 23017?
No i didn't do it.
Edit:
I'm replacing it now. I will write here the result.
I replaced SYS folder and it don't boot anymore. I will replace the original SYS.
Lotus, i'm having problems with the function "image processing" y select a picture, menu->image processing but nothing happens....do you have the same problem?
Yes it's same on me . By the way i copied sys folder except .ROM and .VM folder and it works now.
Lotus-one said:
Yes it's same on me . By the way i copied sys folder except .ROM and .VM folder and it works now.
Click to expand...
Click to collapse
:s please let me know if you found a solution for the image processing function!
I don't know how to make it works but you can download xip first page and copy sys folder except .ROM and .VM folder for porting 23017
Lotus-one said:
I don't know how to make it works but you can download xip first page and copy sys folder except .ROM and .VM folder for porting 23017
Click to expand...
Click to collapse
Thanks, i will do it!
How you put the xip.bin into the os.nb?
Download http://forum.xda-developers.com/attachment.php?attachmentid=274198&d=1264768202 this and extract everything to ROM folder then run INSERT_XIP.bat
It's done you can cook with 23017