Hello my friend,
I search a kitchen ready for wm6.5 for the Elf/elfin.
Anyone have a link, or could upload the kitchen ( even if there is no sys/oem/rom folder)
Thanks a lot
regards,
Nixeus
just look at this
http://forum.xda-developers.com/showthread.php?t=509822
rendyzou89 said:
just look at this
http://forum.xda-developers.com/showthread.php?t=509822
Click to expand...
Click to collapse
That is a ROM, not a KITCHEN.
Nixeus, I had already answered your question a couple of times in the past.
http://forum.xda-developers.com/showthread.php?t=467488
I have seen your answer Dsixda, and than for this !
I knwo the Platformerebuilder kitche, but i would like to find an "old" kitchen with only the two batch ( buildnb.bat) and createrom
You can look for Beep's platformrebuilder. I use with multilenguage and multisystem and works goooood!!
Hi,
I have make a kitchen with PlateformeRebuilder, and my ELF don't boot .
I have already make a lot of wm6.1 rom with no problem, but in wm6.5 my elf don't booot.
Will be it possible than a person could share a wm6.5 kitchen for elf with oem,rom,and sys folder ?
It's not for publish my rom, but just in order to understand why my rom don't boot.
It will very great and nice to you
Thanks a lot,
Regards,
Nixeus
Nixeus said:
Hi,
I have make a kitchen with PlateformeRebuilder, and my ELF don't boot .
I have already make a lot of wm6.1 rom with no problem, but in wm6.5 my elf don't booot.
Will be it possible than a person could share a wm6.5 kitchen for elf with oem,rom,and sys folder ?
It's not for publish my rom, but just in order to understand why my rom don't boot.
It will very great and nice to you
Thanks a lot,
Regards,
Nixeus
Click to expand...
Click to collapse
Ok, I can give you my kitchen with various sys in WM 6.5, but i need to upload and send you a link by mp, maybe on monday ok? Do you need the OEM instead? I work in 0C0A and just have a basic OEM in 0409
It's very nice to you !
I work in 040C ( french) but it's not a problem
Thanks a lot !!!
hello humrod,
Thanks a lot for your kitchen.
Unfortunately i have an runtime error, it appear there is an error in a folder
Have you try to run the .bat with the 0409 file ?
Thanks a lot
Yes, in fact i cooked a 0409 rom and flash it in my touch, and flash well.
ok
So i don't understand why i have this error, according to the serahc engin on xda, this error is here because of an error in SYS or oem, or PKG, or ROm
Let's resume:
I give you Sys/OEM/ROM/ext folders, right?
You download the kitchen from Bepe's (dark forces team), rigth?
You actualize the Platformrebuilder.exe, right?
as i said, the runtime error becomes a xip error (rom folder), or maybe a payload error. Discharge others, because before send you the files, i probe to build a rom (0409 of course) and flash it on my elfin.
Did you change anything? did you use your old kitchen?
If you did all this, i suggest you ask bepe's directly.
Now i remember, just in case, if you edit wrong the BuildRom.bat cuold have this error.
Hello
I have use the plateforme rebuilder downloaded from the darforceteam website.
I don't have mae changes in the kitchen. Just run the.bat !
That's why i think there is a problem in the rom folder.
best Regards,
Nixeus
Nixeus said:
Hello
I have use the plateforme rebuilder downloaded from the darforceteam website.
I don't have mae changes in the kitchen. Just run the.bat !
That's why i think there is a problem in the rom folder.
best Regards,
Nixeus
Click to expand...
Click to collapse
Ok nixeus, maybe the problem is there. I sent you an edited bat with the patches to the folders in the structure i use. this bat is prepared too to work with the platformrebuilder.exe update
Humm ok, but,why i want to do ?
Sorry nixeus, i don't understand your question. Can you explain a little more?
oups, sorry, my question was : what i want to do ? ( I repeat thaht i didn't jave modify the .bat )
Thanks a lot
Ok, i'll upload the hole kitchen and send you the link. Then you can compare the files.
Well friend, here is it. You have to put all the files (the ones i send you before) and this ones in a nwe folder in C:
With this you obtain a basic 21806 wm 6.5 rom in 0409
I sugest you to keep this original, and copy the same with other name, it will work Ok, like other kitchen, and meka your changes there.
http://www.mediafire.com/?oxmxn2jvadj
Hey,
Thanks a lot my friend.
The rom build with no problem
Flash in progress
I can now try to understand why my kitchen didn't boot.
Thanks a lot for your help humrod
Related
Recently, I needed ROMs but non of the kitchens I know work. Can you please give me to links of any kitchens you know.
Thank You in advance for your attention!
http://lumpistefan.dyndns.org/
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
If you are cooking a 2002 rom make sure you leave some space.
LumpiStefan said:
batvanio said:
thank you for your reply!
but this kitchen is not working properly. it gives the following log:
no files for configid 26220739Cannot fit files in given sectionsError splitting files
Any other kitchens?
Click to expand...
Click to collapse
What for a ROM you´re trying to cook? Which application included? How much free space in the ROM?
Which Autoconfiguration?
Stefan
Click to expand...
Click to collapse
Lumpi , First of all thanks for your Kitchen and ur hard work..
but the last time I was cooking a rom (last week) T mobile Rom 4.01.00 with the Windows Mobile Boot screen image and the 4.01.16 with the o2 Boot screen those images didn't show up I got instead T-mobile bootscreen.
At the end the Rom what's important to me but still there should be some fix for that, Thank you again for the Kitchen I hope to see soon the WM2003 SE in it hopefully.
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
batvanio said:
I was trying to cook the rom 3.17.03 ENG O2-Euro.
the gauge for the free space was about 300k left after configuring the software of the rom.
Click to expand...
Click to collapse
Ok. I made an hint, that with the XDA-Developers Autoconfig you have to let about 450kB free for cooking. I'm sorry, that i can't change this. Then it should work. The error of the missing config files will still be there. This is more work for me. But it should only concern the german autoconfiguration...
HTH
Stefan
LumpiStefan
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Re: LumpiStefan
batvanio said:
I had a lot of problems cooking ROMs because the languages are in other languages:
In Pocket PC kitchen I cooked 3.17.03 ENG O2-Euro, which as mentioned in its name should be in English, but it turned out to be in French!
In the Pocket PC 2003 kitchen I cooked 4.01.00 ENG beta which also should be in English but is in German.
Is there something I am not setting up correctly?
Click to expand...
Click to collapse
I'm sorry, but i can't believe this. Have you tried to look at the log after cooking the rom? There is an output of the BAse Rom you cooked.
Many Users are using the kitchen, but i never heard of this problem. Which browser are you using?
Stefan
My brawser is IE 6.0.2800
It is very strange because i tried not only once but several times cooking both roms and upgrading them to the phone, but with the same result.
Very very strange...
batvanio said:
Very very strange...
Click to expand...
Click to collapse
This is true. Tried it now for myself, but all was working fine.
Used same browser version, and all worked fine....
:shock:
I'm sorry, but it looks like I can't help you.
Stefan
What can i do now?
I cannot remove the French ROM. When I am trying to upgrade it with another ROM it says Unsupported language 'FRA'.
Can you suggest how i might fix this.
P.S. - the ROM i want to backup to is in the *.exe format
I think, you have to use adapt rom, or flash your device using an SD-Card. Therefor you have to extract the exe-File with winzip, and copy the NK.nbf file via xdatools to an SD-Card.
There are many threads about this..
Stefan
I managed to do it successfully. Thank you very much for your help!
I also would like to ask you if there is a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
was wondering if we could use the rom kitchen for xda2?
The Hobbit said:
was wondering if we could use the rom kitchen for xda2?
Click to expand...
Click to collapse
Kitchen should also work for XDA2 ROMS. But in the moment, there are only XDA1 Roms in it. Also you normally don't have the nessesary of doing this since the XDA2 has enough space.....
Stefan
is there a way to install programs from your kitchen without burning a ROM, that is if I can somehow install them to my phone on its present ROM.
Thank YOU in advance for Your help!
well some programs you can download and install in your ram but rom can only be writen to when you flash the rom and you can only flash the whole rom at once
but can i download the programs from the kitchen, the one which you customize for the rom, and how can i install them to my current rom
Hi,
Its good to share with prophet users the following thread from wizard forum.
Dont think it will not work for prophet, iv done it on aku 3.3 (read thread)
Well i want we should come forward ( do it at ur own risk) to this and
share the experience here in this thread.
http://forum.xda-developers.com/showthread.php?t=297027
Here is latest Faria's Rom Kithen with WM6
that seems to be lil advanced and automated
read me in pdf View attachment 37884
All newbee dont do anything if ur not awrae of basics
hi,
can i use the os.nb and the Upgrade_rom.bat from Aserg's update ?
with my neo. i like to add some spezial tools.
cu
inteks
hiho,
i need some space and i dont use Windows Live, can i delete all WLM..... Files in the Dump Folder without consequences ??
are there other files that can be deleted ?
thx ia
inteks
inteks said:
hi,
can i use the os.nb and the Upgrade_rom.bat from Aserg's update ?
with my neo. i like to add some spezial tools.
cu
inteks
Click to expand...
Click to collapse
U can do it with, but first u have to repack OS.nb to nk.nbf
no need of Upgrade_rom.bat
first Try some basic steps like extracting/rebuilding without any change.
thanx
nandlal
hi,
i allready buid and flashed my own rom with success.
i copied the os.nb to the romdump folder and renamed it to 80040000-OS.nb
then i execute DUMP_ROM.
then i add and remove some files and build it with BUILD_ROM.
then i copyed the 80040000-OS.nb back to the ASERG folder as os.nb
and then i flashed it.
but i run quickly out of space. the question is witch files can safety deleted ?
/inteks
How can I solve the following error: ¨unable to open source image 80040000-OS.nb¨. Im trying to dump the smart1 wm6 rom for htc prophet.
I get the same error message! That's really anoying ...! -.-
animelover said:
I get the same error message! That's really anoying ...! -.-
Click to expand...
Click to collapse
Have u repacked 80040000-OS.nb into nk.nbf ?
I think no.
please follow correct procedure explained in readme.
iamthebug said:
How can I solve the following error: ¨unable to open source image 80040000-OS.nb¨. Im trying to dump the smart1 wm6 rom for htc prophet.
Click to expand...
Click to collapse
For ROM Prophet, when U run DUMP_ROM it extract file 80040000-OS_0.nb insteed of 80040000-OS.nb. You can edit this file name in DUMP_ROM.bat file
Goodluck.
nandlal_mk said:
Hi,
Its good to share with prophet users the following thread from wizard forum.
Dont think it will not work for prophet, iv done it on aku 3.3 (read thread)
Well i want we should come forward ( do it at ur own risk) to this and
share the experience here in this thread.
http://forum.xda-developers.com/showthread.php?t=297027
All newbee dont do anything if ur not awrae of basics
thanx
nandlal
Click to expand...
Click to collapse
Hello Nandlal,
I want to cook Traditional Chinese WM6 rom, do you know where can I find the rom source? Tks.
scott4 said:
Hello Nandlal,
I want to cook Traditional Chinese WM6 rom, do you know where can I find the rom source? Tks.
Click to expand...
Click to collapse
see ur PM, iv sent some thing to u
nandlal_mk said:
see ur PM, iv sent some thing to u
Click to expand...
Click to collapse
Hello Nandlal,
Thanks for you reply.
When I have a list of files of extension rom, how can I make it to a
9b000000-Extension.nb file?
Do I need to use Winimage tool? Or what tool should I use?
Thanks.
scott4 said:
Hello Nandlal,
Thanks for you reply.
When I have a list of files of extension rom, how can I make it to a
9b000000-Extension.nb file?
Do I need to use Winimage tool? Or what tool should I use?
Thanks.
Click to expand...
Click to collapse
yes u have to use winimage
Wow, this kitchen is extremely easy to use. Cheers to the maker.
I experimented with Aserg Os.nb and Smart1 Os.nb, edited them and flashed the roms.
Is it possible to cook a Wm6 Rom using the RUU, and flashing from the bootloader instead of the standby mode used in Smart1 rom.
Hello Nandlal,
I would like to cook Spanish WM6 rom (or at least to try it).
Please, do you know where can I find the rom source? Tks.
zeusin said:
Wow, this kitchen is extremely easy to use. Cheers to the maker.
I experimented with Aserg Os.nb and Smart1 Os.nb, edited them and flashed the roms.
Is it possible to cook a Wm6 Rom using the RUU, and flashing from the bootloader instead of the standby mode used in Smart1 rom.
Click to expand...
Click to collapse
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
As 4 as i 'v experienced, i could not succeed with any cooked aku higher than 2.2 which results in successful boot of device even flashing always succeed with standard RUU.
and beside that same cooked Roms easily flashed with pdocwrite method
(standby mode) and device booted well in every case, even with faria's wizard Rom
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)
Dapso said:
Hello Nandlal,
I would like to cook Spanish WM6 rom (or at least to try it).
Please, do you know where can I find the rom source? Tks.
Click to expand...
Click to collapse
sorry i dont have any source for any spanish Rom
nandlal_mk said:
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)
Click to expand...
Click to collapse
Thanks Nandlal. Yea i realized that for cooked roms, pdocwrite is the way. RUU just made the flashing look easier
thx for your advice
I always take the WM6 ROMs and make an RUU install image of it and I have had no problems at all. The only issue is when the ExtROM is in the form of files and not an image. (The you must use the PDOC utils, which means you must be at AKU 2.2 first)
nandlal_mk said:
well i think its ur typing mistake but RUU is for flashing not 4 cooking.
As 4 as i 'v experienced, i could not succeed with any cooked aku higher than 2.2 which results in successful boot of device even flashing always succeed with standard RUU.
and beside that same cooked Roms easily flashed with pdocwrite method
(standby mode) and device booted well in every case, even with faria's wizard Rom
So i think RUU workes flawless with shiped Roms (or better u say 'OS')
and with any other component IPL/SPL/LOGO/Splash/Extrom.
For cooked Roms ( OS) u have to rely on pdocwrite
(please correct me seniors if im wrong)
Click to expand...
Click to collapse
flykthewiz said:
I always take the WM6 ROMs and make an RUU install image of it and I have had no problems at all. The only issue is when the ExtROM is in the form of files and not an image. (The you must use the PDOC utils, which means you must be at AKU 2.2 first)
Click to expand...
Click to collapse
might be , but me n my device r not lucky
Edit: BTW, what is device type G4 or G3 and which RUU r u using, G3/G4 compatible or NVID or Wizards?
I alwasy use G4 RUU.
After PMing jcespi2005 for his approval, I've taken the time to write up this beginner ROM cooking tutorial. Please reply with your comments or questions about it in this thread.
Enjoy.
Kaiser ROM Kitchen Tutorial
Here are some user testimonials:
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today. It was a great learning experience. I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more. I have both a Tilt and a Kaiser. Looking forward to more learning.
Click to expand...
Click to collapse
gregross said:
...Alex, thanks for the tutorial and components in a nice tidy package - actually got me to jump into cooking for the first time...
Click to expand...
Click to collapse
stozmon said:
_Alex_ and jcespi2005,
Thank you both SO VERY MUCH for all of your time and contributions.
I've been hesitant thus far to cook my own ROM but with the noob friendly screenshots added to the wiki, I finally had the courage to cook up my own ROM, flash it and what do you know...it WORKED!
Being a professional chef, I am now inspired to work towards virtual chefdom in the ROM realm.
Thanks again!
Click to expand...
Click to collapse
ecltech said:
Great job ... couldn't be easier!
Click to expand...
Click to collapse
Do all these tools function rightly in windows Vista ?
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
cooked rom
hello alex
sorry about my english
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
ok i know to do that without any error, i need allso take the part01.raw and part02.raw and puy them with ruu_signed (the cooked one "dutty's") in one folder
when i start cooking that rom i allways get the same result about 2 dsm file that the accses is denaid
what can i do to fix that problem, what did i go wrong
jast to tell you that is no problem whie shipped rom, buy with cooked i dont know what to do
thanks for your help
doron
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
I assume you have to manually create a sub-folder called packages under
\kaiserkitchen\ ??
But then what is the use of the OEM_HTCxxx folder?? What if anything goes in there??
So then, if I unzip all the OEM cab files into the \kaiserkitch\packages folder (OR any other OEM packages I can find , especially HTC packages) then when Ervius runs - I should see all the packages I copied to the \kaiserkitch\packages folder???
Many Thanks for your tutorials - it's really nice to see people sharing their knowledge!!
Cheers
John
dcdivenut said:
What is int he package Cingular Pre-Midlets 9020? Sounds like it could either be important or junk
Click to expand...
Click to collapse
Cingular Pre-Midlets is all the java games that came with the phone. It's mostly junk...
mordof said:
hello alex
i want ask you about recook cooked rom like dutty's rom
i know that in need to instell the rom in my device and after that i need to dump the rom/
Click to expand...
Click to collapse
Not really good at reconstructing ROMs, but the errors you're receiving about duplicate DSMs, you'll need to find the duplicate folder and/or file and delete it.
You might be able to get more help in the reconstructing ROMs thread stickied at the top of the forums.
Hope this helps.
panosha said:
Do all these tools function rightly in windows Vista ?
Click to expand...
Click to collapse
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
odyseus said:
So just to check I under stand this..
I went thorugh the the install instructions OK but the bit that confused me was...
Extract the OEM Package folder included within the ROM thread to \kaiserkitchen\packages
Click to expand...
Click to collapse
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
tkalli said:
I want to thank you for the tutorial and the other members of xda-developers that contributed to the Kitchen.
Following the Tutorial, I cooked several ROM's today.
It was a great learning experience.
I flash all the ROM's and they worked.
Know I have to put together everything I want in them and cook some more.
I have both a Tilt and a Kaiser.
Looking forward to more learning.
Click to expand...
Click to collapse
Glad to see that I'm helping others cook
_Alex_ said:
It seems like you haven't downloaded the OEM packages yet. It should be alot clearer with the files in front of you. Download them first and see if that helps...
Click to expand...
Click to collapse
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
odyseus said:
Hi Alex,
My mistake I though I had got these files..
Just one more question. I have deconstructed Dutty's latest ROM. There are a few 'OEM' packages in the SYS folder that I would like to add to your base ROM one being a folder called HTC Touchflo Cube.
I have set up another kitchen folder with your Alex base ROM, now where would I put the additional Dutty extracted folders eg HTC Touchflo Cube folder?
Do I simply add the additional Dutty extracted OEM packages to the SYS (Alex) folder? or do I add it under (Alex) packages??
Many Thanks for your patience
John
Click to expand...
Click to collapse
Extracting OEM packages from other people's cooked ROMs isn't that easy which is why it's not covered in this tutorial. I also don't like doing it because it's somewhat stealing...
You may have better luck following my steps in my OEM Package Tutorial, and convert the htc touch cube cabs to OEM packages.
Here are some links for HTC touch cube cabs:
http://forum.xda-developers.com/showthread.php?t=348437 and http://forum.xda-developers.com/showthread.php?t=343583
Hi Alex - I didn't think of that, I didn't realise that the ROM author had made their own OEM packages..
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
_Alex_ said:
Glad to see that I'm helping others cook
Click to expand...
Click to collapse
Next I am going to try and cook one with the dotnet 3.5.
Be traveling next ten days, so may not get to it right away...
sorry doppel-post
Hi Alex thx for this TUT... i´m testing...
First: Sorry for my bad english
This is the first time for me to cooking roms.
i use the HTC German recunstructed ROM as Base-Rom...
after klicking the GO Button, i have many line´s of:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
EDIT On:
All is great... my first GER cooked ROM run I´m so happy
and now i musst learn how i create/delete (GERman) OEM Pakages, to create a good German ROM...
@ ALex
very big thx!!!
Edit OFF:
Martie said:
package "XXXXXXX" does not contain .rgu file "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.rgu"
not all, but a few... is this normal??
Click to expand...
Click to collapse
Yes, not all packages contain rgu or registry entries. No worries there.
odyseus said:
Anyway, in that case, I will have a go at generating a OEM package for coreplayer, I assume that I will add this package in the kaiserkitchen\packages folder? (Not SYS etc..)
Cheers
John
Click to expand...
Click to collapse
Yup, it all goes in packages.
FWIW, The Core Player Media Player (TCPMP) exists as a OEM package for the freeware version and can be found as 'Pocket Media Player' within the OEM packages included within the Kaiser ROM Kitchen by jcespi2005.
_Alex_ said:
From other threads, I've heard that extract will not work in Vista. I can't say about cook or flash until I get a chance to test it.
Hope this helps...
Click to expand...
Click to collapse
Cooking works great in Vista. Thank you.
Hi,
at the begin, i want to give all credits to _Alex_ for his kitchen and i want to tell you all that "This kitchen is _Alex_ kitchen with integrating All packages to one by bepe"
if you are beginner, just visit this
if you tried kaiser kitchen before, just read the edit directly and download.
What i did:
- Fully supports all_packages_to_one.exe by bepe (which give the ability to combine all dsm files into one dsm file, so Windows directory contains just one dsm file).
- All packages arranged to be easily updaeted.
- Useful registries included.
- SYS and ROM based on 19202 by nothrills.
i hope you will find something in this small thing .
you can download it from: http://rapidshare.com/files/108164052/TNT.19202_Full_Kitchen.rar
The kitchen is missing Rom Folder, Download it from the link: http://rapidshare.com/files/114997569/19202_Kaiser_Rom_folder_for_TNT.kitchen.rar
Credits:
_Alex_ for his kitchen.
Bepe for his all_packages_to_one tool (and ofcourse for every thing he did in the forums).
Nothirills for the base rom.
Thanks for sharing !
Does it include XIP porting too ?
MickyMax said:
Thanks for sharing !
Does it include XIP porting too ?
Click to expand...
Click to collapse
Kaiser still needs manually xip porting, as bepe reported that his tools can't work in kaiser and polaris.
while kaiser always has the latest builds which come already ported, all you need is to extract XIP, ROM and SYS folders and then use the same OEM you want (ofcourse you need relocate modules tool which is in development forum)
in general, you need to have a look into OEM folders in this kitchen to rearrange any new release as the arrangment in this kitchen, so it is easier.
good luck.
Where is the ROM?
its right said:
. . . - SYS and ROM based on 19202 by nothrills. . .
Click to expand...
Click to collapse
I am not finding the ROM in the download - there is no os.nb that I can find
cushcalc said:
I am not finding the ROM in the download - there is no os.nb that I can find
Click to expand...
Click to collapse
i did that 3 weeks ago, i forgot what is included exactly, but someone I gave him the kitchen at that time, and he created his own.
ROM folder doesn't there !!!
Goooooooooood
Hi,
Many Full Thanks for this share.
Could you please make a little guide "How Add Modules" into SYS folder as you do for your Wizard Kitchen ?
Thanks anyway
Moo
Hello all
Its Right.
Does the OEM Packages provided contain the Packages you use to cook your ROMs?
I love the work you and your team do.
God bless you all.
MooCan said:
Hi,
Many Full Thanks for this share.
Could you please make a little guide "How Add Modules" into SYS folder as you do for your Wizard Kitchen ?
Thanks anyway
Moo
Click to expand...
Click to collapse
sorry, but all the tools used for porting are not compatible with Kaiser and Polaris.
Blueangel69 said:
Its Right.
Does the OEM Packages provided contain the Packages you use to cook your ROMs?
I love the work you and your team do.
God bless you all.
Click to expand...
Click to collapse
Yes, all the packages without exceptions . it is TNT.19202 professional kitchen) .
noob
its right said:
sorry, but all the tools used for porting are not compatible with Kaiser and Polaris.
Click to expand...
Click to collapse
Hi,
I'm starting cooking and learning.
I have read and search but this step is really not clear in my head
So excuse me in advance for this question.
So I would like to add some modules (made with resersmode) in an Original OEM Kaiser Rom (eg the NoThrills WM 6.1 WWE) that has been extracted into OEM and SYS folder and XIP using the Kitchen and then rebuild and flash.
- does I need to port something or modify the XIP as this is an original Kaiser XIP ?
- does I need to only copy my new modules to the SYS folder and reallocate all modules using G'Reloc ?
- does is it needed to make something particular with the original XIP (reallocating, ...) when adding modules ?
Thanks in advance.
Moo
MooCan said:
Hi,
I'm starting cooking and learning.
I have read and search but this step is really not clear in my head
So excuse me in advance for this question.
So I would like to add some modules (made with resersmode) in an Original OEM Kaiser Rom (eg the NoThrills WM 6.1 WWE) that has been extracted into OEM and SYS folder and XIP using the Kitchen and then rebuild and flash.
- does I need to port something or modify the XIP as this is an original Kaiser XIP ?
- does I need to only copy my new modules to the SYS folder and reallocate all modules using G'Reloc ?
- does is it needed to make something particular with the original XIP (reallocating, ...) when adding modules ?
Thanks in advance.
Moo
Click to expand...
Click to collapse
for kaiser, you have to learn how to port XIP manually.
but if there is a ready kitchen (as linked here) you don't need to do anything, just add and remove the packages in OEM folder.
in case of adding other modules in OEMDrivers, you need to use GReloc which is in development forum and read the comments mentioned there.
I hope that i gave you some of useful informations.
good luck
its right said:
for kaiser, you have to learn how to port XIP manually.
Click to expand...
Click to collapse
Can you make a good tutorial for this please ?
MickyMax said:
Can you make a good tutorial for this please ?
Click to expand...
Click to collapse
there are many of great threads in the forum, check this http://forum.xda-developers.com/showthread.php?t=379598
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
P1Tater said:
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
Click to expand...
Click to collapse
good luck, I'm sure we will see your touches soon .
please give us the ROM folder. Thanks
The ROM folder is uploaded
The 1st try with this kitchen worked perfectly. I cooked a rom that supports Chinese R/W, adding a lot more OEM packages. The ROM is fast and almost flawless, thanks.
Got the rom folder and did g'relocate and cooked the rom and flashed it, got to the second splash screen and the touch screen froze on "tap to set up your device". However, activesync connected to the phone and i was able to flash a known rom to recover. Any idea what i did wrong? I made no changes to OEM or anything else. Could it have something to do with the touch.dll or such, or maybe i got the slot addresses wrong?
P1Tater said:
Thanks man. I have been really thinking about jumping in to the kitchen myself. This is just a push for me. Now to find the time.
Click to expand...
Click to collapse
Same sentiment here...just to find the time now....
Hi guys,
If you want to make your own Rom for your i617, just follow these steps:
1. Get these runtimes and install on your PC (Windows XP): vcredist_x86.exe and NetCF 2.0
2. Get the the kitchen: [SamSung i617] kitchen, then extract to any where you want.
3. Get the original AT&T WM6.1 for i617 (only OS part), then put into BaseBin folder in the kitchen: The original Rom AT&T WM6.1 for i617 only OS file (pda.bin)
4. Now let you start to make the kitchen work:
- Run Dump [pda.bin].cmd then wait to complete.
- Get the file: initflashfiles.dat, then put into OEM\OEM_Lang_0409
Done. Now you can cook anything you like, after cooking, just run Build [pda.bin].cmd to rebuild the new Rom (in RomUpdate folder).
There is a guide to update Rom in the Attatchment.
But note that:
- Maybe some of PCs have some problems (cause virus or any reason), it can't show full hidden files. Just install fresh Windows XP again to fix it.
- To port the newer version of build, let you have to learn Here
And the last, I did sell my SamSung i617 to change a new toy
Sorry for my bad English.
Good luck.
Thanks for the kitchen, downloading now
Update clean Rom. See attachment at post #1.
i600
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D
^^rac said:
I wonder if this will genuinly work on i600!
It looks nice.......i wish i could have WM6.1 on my device :-D
Click to expand...
Click to collapse
Just download my kitchen. Get your "pda.bin" (the pda.bin of i600 ship Rom), then place into BaseBin folder, Dump it, build/cook...
error unpacking
@nhathoa
i get an error unpacking your kitchen...
part 4 has an error in file g´reloc.exe or something like that...
is there any problem?
and btw: how can i get my pda.bin? do i need to dump my rom?
thanks for your help!
regards
chuckbert
Please try to download part 4 agian.
what is your device?
device
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert
chuckbert said:
i reloaded part4 already 2 times... error stays...
but i found a file called greloc.exe inside... is this the one needed?
i have a german i600... it´s german though it has a qwerty instead of a qwertz keyboard.
regards
chuckbert
Click to expand...
Click to collapse
Let me try with i600 on my kitchen. But I haven't got i600 device.
More:
I did try with i600.
My kitchen work fine with samsung i600 .
Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!
daxy said:
Nhathoa,
Can you upload your i600 WM6.1 image somewhere? I tried to cook it but didn't work (yet). It would really mean a lot if you can upload a working rom.
Thanks!
Click to expand...
Click to collapse
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.
nhathoa said:
Sorry, I have no i600 device, so I can't make/test WM6.1 for i600.
Click to expand...
Click to collapse
There was someone willing to use his device to test WM 6.1 ROM. I dunno how cooking etc works, but it would be awesome, if someone can try to bring this to i600
Good work nhathoa!
Hopefulle someone can try to cook a succesfull i600 WM 6.1 ROM!
i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction
ejoya said:
i dont recommend using greloc in i607.. as for i600 it might be the same.. the problem is when you use greloc, the camera software will malfunction
Click to expand...
Click to collapse
Exactlly. The g'reloc.exe can't relocate resover module, but if you skip g'reloc and edit some module, device not boot. Thanks for your report.
More: Did you port build 20282 from ROSE? I did port full XIP and SYS, Free Ram on boot is 83Mb, but low speed, not smooth.
resover is not needed..
porting htc sys should be ok.. but its too much trouble if you want a perfect stable rom
Does anyone upgrade my clean Rom? Is there something wrong?
Hi!i dont understand how i can install the rom on a i600..how can i cook a rom for my i600??"BaseBin\pda.bin" where i can find it?
I CANT BRING THE GPS WORK WITH UR CLEAN ROM,ROLL BACK 2 ORIGIN NOW..
THX FOR UR TOOLS, HOPE FOR UR NEW ROM NOW.
I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version
laronz said:
I have tried the kitchen, and dump is ok.But it makes some errors when building . I tried to only run buildos, but failed!
It seems that an older version could run correctly, which I used in a X51v kitchen. So does it need some other files? like .net 3.0 or 3.5. I just installed a 2.0 version
Click to expand...
Click to collapse
What error did you get?