Database Info

SD image WM5 CHS version, not work for all device yet

the last post tells you the detail

THANX
buzz

Thanks for reply.
Hope for good news

Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks

you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software

The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.

on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz

ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem

OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.

it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz

I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.

Do you mean that you can choose the Chinese region now?

Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached

buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...

only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.

expecting a perfect WM2K5_160C supproting Simple Chinese.

mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.

WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16

Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz

Faria's RK - customized keyboard (no msim.96.dll.0409.mui)

Hi folks!
Firstly huge thanks to all of you guys, great community!
After i have installed WM6 (Faria's RK, btw. a brilliant work) I have been trying to install an individual keyboard layout for a couple of hours. Well I read that the msim.96.dll.0409.mui has to be replaced but there is not such a file (yes, i can see even all hidden files etc.) - therfore simply copying the file in the directory wont change anything. The only files i've got are msim.96.dll and msim.dll - and of course they are in the ROM, means no overwriting or deleting possible. Probably I gotta add anything to the registry to refer the keyboard to the new file msim.96.dll.0409.mui???
Thx.
irm

4irm said:
Hi folks!
Firstly huge thanks to all of you guys, great community!
After i have installed WM6 (Faria's RK, btw. a brilliant work) I have been trying to install an individual keyboard layout for a couple of hours. Well I read that the msim.96.dll.0409.mui has to be replaced but there is not such a file (yes, i can see even all hidden files etc.) - therfore simply copying the file in the directory wont change anything. The only files i've got are msim.96.dll and msim.dll - and of course they are in the ROM, means no overwriting or deleting possible. Probably I gotta add anything to the registry to refer the keyboard to the new file msim.96.dll.0409.mui???
Thx.
irm
Click to expand...
Click to collapse
thats because ther is no such file in any wm6 by default!...just put the file in any package. or just copy the file to windows in the device.

just copying the file doesn't work (did even a reset), i guess wm6 isnt searching (no registry entry by default) for msim.96.dll.0409.mui.
any other suggestions?
Cheers!
irm

same problem... any help? what am I doing wrong?

4irm said:
just copying the file doesn't work (did even a reset), i guess wm6 isnt searching (no registry entry by default) for msim.96.dll.0409.mui.
any other suggestions?
Cheers!
irm
Click to expand...
Click to collapse
.0409 is for English (United States) regional settings. Is that what you are set to?

Yes... still not working.

That doesn't make any sense. I take the mUn keyboard (which is just that file) drop it in \Windows, soft reset, and it works. My package I use in my rom is doing exactly the same. There should be nothing else to it. Either your mui file is bad, or there is something else different with your build.
Is the rom you are running built as WWE?

As far as I know it is... under Settings > Device Info, it reads "ROM Version: 2.18.0.0 WWE"
It's Faria's RK Crossbow

the same here, i am not using faria's WWE instead i flashed a file created with the RK. i already tried quite a lot, even renaming the 0409 to 0407 as i am using the German regional settings.
there are probably differences between the RK and WWE (version)

Question about language package

I have extract language 0804 from China Mobile ROM and sort it into OEM and SYS, however, there is no "Language_Simplified Chinese" folder under OEM, hence, when I try to cook my own ROM, I can't find Chinese options.
Can any one let me know how to build the the folder "Language_Simplified Chinese" and make the options visible?
Thanks in advance!

There is no such folder in the original ROMs, you have to create one. Look at the other language packs (are you using the language kitchen for new guava or the vox kitchen 0.3??). There you should find a .dsm and a .rgu (rgu s are hidden) and a option.xml. Just copy them to your "Language_Simplified Chinese" folder and then rename the dsm and rgu to ce2bca2e-da07-4123-9e20-87dc3dcf032c.dsm and ce2bca2e-da07-4123-9e20-87dc3dcf032c.rgu Then go into the option xml, there you will find a line with the former name of the rgu change it to ce2bca2e-da07-4123-9e20-87dc3dcf032c . Also change the line for the name to Chinese.. Then you have to go into the rgu (with editor) there you have to change all the language codes to the code for Chinese, but only change the codes for the former language, because English has to stay in, English is either 0409 or 0809!

Many thanks.
Yes, I am using kitchen to cook the rom. However, when I try to build the rom, it reports an error that "temp\dump\mixpcold_smartphon_1.provxml" already exist.
Then what can I do?

Search for the file, it should be in the ROM twice somewhere in the sys or oem folder, delete one, if it is in an oem package delete that not the one in sys.

Thanks again.
I have successfully build the rom and flash to the Vox, but the display just squares, neither Chinese nor English.
Can you please tell?

Hm, can you upload all your language files, just zip and attach them, I'll see what I can do!

Great appreciate your help.
I've uploaded file in /Smartphone/Vox/Vox Kitchen 0.3/languages/
Please check it.

Do you have a Chinese keyboard layout or is it a normal English qwerty? Maybe I have found your mistake! I'll upload once you have told me about the keyboard!

It is normal English Keyboard.

OK I am uploading, wait 5 minutes and it's done! Again I don't know if it'll work at all, because it is not from the same ROM version!

It's done!

frauhottelmann said:
OK I am uploading, wait 5 minutes and it's done! Again I don't know if it'll work at all, because it is not from the same ROM version!
Click to expand...
Click to collapse
Any way, more than thanks.
One more question.
I have dumped the original rom into three raw files. Can I flash this files back? If so, How?

I am sorry I don't know. Nobody here has tried it and reported back, but people keep asking it. It should (!) work when you just extract it to OEM and SYS folder, place that in the kitchen and run it, but as I said I don't know if it works!

I think a raw file (or was it a bin ?) can also be directly flashed with pdocwrite.exe but I have never tried that. Search for it on the forum or with google and be cautious with it.
Please report here if you are succesfull

Yeah, because if it works we could write a Wiki article. Did the new language pack work?

Unfortunately, it is not work.

Any more ways to help me out?
What I guess it because of wince.nls file. It it Chinese support file. I can find it after flash, but I can't find in folders before I cook them. Do you have any idea?

Changing Default Keyboard Skin - WM6.1

Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.

Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.

austinsnyc,
Thanks for the response.
If I cook the .mui file in a ROM it works fine. The problem is not being able to replace the file (even though the file is overwritten). I was able to do this in WM6.0 ROMs but it doesn't seem this is possible in WM6.1 ROMs and I just wanted to confirm it.
So if I dump, change file, re-cook, works fine. I guess I'll have to do that with any of the new WM6.1 ROMs I end up running.
Thanks again.

ecltech said:
Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.
Click to expand...
Click to collapse
austinsnyc said:
Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.
Click to expand...
Click to collapse
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.

Try this. First import the attached Keyboard Cert registry file (use dotfred's task manager which does registry editing, or resco registry editor). Once you do that, you should be able to use the various keyboard cabs. I've attached one that has like 20 keyboard styles you can choose from (uses mortscript to do this). Choose the one you want, soft reset, and presto...

sakajati said:
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.
Click to expand...
Click to collapse
sakajati,
Works fine now. Thanks for the links.

mfrazz,
Thanks for the info also! Appreciate it.

Enhanced Notification Manager ?

Hi all,
has anyone tried this one already ?
Link
It seems to add some functionality to the Notification Manager (like turning on/off WiFi, for example). But I'm afraid it will not install, because we have the new Notification Manager already.
What do you say ?
Regards,
Marcos

Tried without success. Installation failed without any explanations.

Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu

thanks. works great.

Excellent!
Thank you!

It's nice but I'm missing the different snooze options I had before (with this registry hack: http://forum.xda-developers.com/showpost.php?p=3726469&postcount=10)

very good! thx~~

stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
Installed. Works well like this one in Shaks Topaz ROM for Diamond. Thank you.

Could any post a pic over what it does ?

Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR

stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
This one works. Thanks for it. Will come in handy and i can quickly access battery stats and Comm Man now.
Sidenote - I did get the old WM bubble notifications after the first reset but after soft reseting manually it worked.

jtgbdr said:
Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR
Click to expand...
Click to collapse
Thank you m8

stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
Yeah worked fine, thanks.

PhFr said:
Thank you m8
Click to expand...
Click to collapse
Is there a solution for this?
I'd like to have it say "Battery" aswell...

I'd really like to see the battery word + icon on the notification manager to access its setting quickly (insted of settings tab - show all - system - battery...) any news or solution for the missing word? is it stable, and worth a try? please note that I have a touch pro 2.. thanks a lot for the info guys!

Works not on the MDA Vario V (T-Mobile branding)

cyberpunk627 said:
I'd really like to see the battery word + icon on the notification manager to access its setting quickly (insted of settings tab - show all - system - battery...) any news or solution for the missing word? is it stable, and worth a try? please note that I have a touch pro 2.. thanks a lot for the info guys!
Click to expand...
Click to collapse
eats a lot of ram

Does Enhanced Notification Manager works with MS Shell 3.0?
Cos I disable the TF3D and runing MS shell 3.0. When i installed this Enchanced Notification, nothing happens
Thanks

jtgbdr said:
Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR
Click to expand...
Click to collapse
Yes, there is a way to add the "Battery" string in front, but it requires you to edit a MUI file.
Let me explain:
When you install the distributed cab file it installs on your device various graphic files, plus 2 MUI files. These MUI files are for WWE devices. If your device is set to use other language as default (like mine which is set to work with Greek) then these two MUI files will be installed on your system, but they will be ignored, and the ENM will take it's strings from the original MUI that won't be overwritten by the installation.
There are two ways to get the "Battery" string showing.
The first way is to replace the original MUI files of NM with the new ones that the cab installs. This method arises another problem though: If you do so, the entire NM will be shown in WWE and NOT on your language. This means that you'll get the "Battery" string but all the other strings will be in English and not your language (e.g. Greek)
The second way is a little more tricky, but it has guaranteed results:
You just edit the original MUI file of your device to add the "Battery" string!
Since editing MUI files is tricky I'll post a quick guide on how to do it, but you may need to Google for it to get more details.
Everything will be done on your PC. You will need the following:
1. A MUI unsigner - Signer
2. A Resource Editor
3. The MUI file
I wish I had kept the links, but I only have the apps, so I can't tell you from where to get these apps. The MUI unsigner-signer I get it from these very forums (XDA). Use search to find it. For a resource editor I used XN Resource Editor
The MUI file you will get it from your device. Just browse your phone's Windows directory and copy NotificationManager.dll.XXXX.MUI file on your PC
The .XXXX.MUI part is actually the number of your language. For instance in my case I needed the NotificationManager.dll.0408.MUI which is the GREEK MUI file.
1.
Copy the MUI file on a short path on your PC, something like C:\Temp\MUI\
2.
Extract the MUI unSigner-Signer on the same path
3.
Run the MUI unsigner to unsign your MUI file
4.
Use the resource editor to edit the MUI file. Depending on the case you may need to add the string, or just edit it. We need to fill the string numbered 176.
If the string exists and it's empty just edit it to fill in the string of your desire. If it doesn't exists then create a new string and pay attention on the LANGUAGE selection upon the new string creation menu. It should be the same language as the rest strings on your file. Keep in mind that ALL resource editors will add 16 string in a row. That's normal, and it doesn't matter. Just use the create string command until you have a "176" value that you can edit. Once you edit the "176" String to say whatever you want it to say, save the file and exit Resource editor.
5.
Use MUI signer to sign your file
6.
Copy the modified MUI file somewhere on your device. Don't try to copy it directly on windows directory. The file is marked as "system" and windows won't let you overwrite it.
7.
Once you have copied the modified file on your device, use an application like Total Commander to do 2 tasks:
a. Backup the original file (by copying it somewhere) and
b. Replace the original file with the modified one.
8. Soft Reset your device and everything should be ok now!
PS:
By no way this is a complete guide on how to do it. It's just what I recall from the process I followed some time ago in order to do it myself.
Directions on how to use MUI unsigner-Signer you'll find on the thread that you'll get it.
PS2:
Be safe: KEEP A BACKUP OF YOUR ORIGINAL FILE FIRST!!!
PS3:
Have fun. If someone needs the Greek Translated MUI file PM me. I have also posted it on the ENM thread back at the time I created it...
EDIT: Here's the link of the Greek MUI file: http://forum.xda-developers.com/showpost.php?p=4039484&postcount=125
MUI Unsigner: http://forum.xda-developers.com/showthread.php?t=329160
MUI Signer: http://forum.xda-developers.com/showthread.php?t=306982

runing MS shell 3.0
Goondu said:
Does Enhanced Notification Manager works with MS Shell 3.0?
Cos I disable the TF3D and runing MS shell 3.0. When i installed this Enchanced Notification, nothing happens
Thanks
Click to expand...
Click to collapse
AM CURIOUS ABOUT IT TOO? - does it work with elf-htc touch -?
thxs