Compiled from official firmware for HTC Snap. Only the English language. Keyboard layout as on the devices from Vodafone.
http://www.ziddu.com/downloadlink/9250620/my_rose652.rar
Thanks Caramba,
It's as good as your prvious release, My_rose_wm6.1.
Maybe even better
Caramba you are the best. i have tried the your Previous version on Palm 500v it is excellent, today i will try your new version and update it, thanks
April 08
I have Flashed the WM 6.5 on my Palm 500v it is working Excellent, so far no problem.. thanks for the ROM
praveenkreddy said:
Caramba you are the best. i have tried the your Previous version on Palm 500v it is excellent, today i will try your new version and update it, thanks
April 08
I have Flashed the WM 6.5 on my Palm 500v it is working Excellent, so far no problem.. thanks for the ROM
Click to expand...
Click to collapse
Just wait a bit longer, Caramba is busy cooking a wm6.5.3
If it is just as stable as the current 6.5 I'll go for it.
Thanks a lot for this one! I like this more over your 6.5.3, because it has more features like the weather panel and the better audio player.
Still I have one question. Im using Palringo as IM, which puts a notification Icon in the taskbar. Is there any way to enable this icon also in the taskbar of the homescreen? So you can see when you got new messages right from the homescreen. Would be of course even cooler if it would be possible to include it in the notification panel on the home screen, but i think thats not possible..
Thanks for this one
chillar
I've never used Palringo, and unfortunately I can not help.
thank you! My setup is wonderful to use. There are no what happened. a better version
Hello Caramba.
I appreciate your hard work on this one. I been looking for a solution for my phone for a long time!
I have a problem flashing this rom. When i turn on the device with the bootloader, it does not autoflash.
It shows the PALM logo and in text on top it says:
EBOOT7 Ver:V4.0.0 ExtROM:ESN
My phone is a palm treo 500v from vodafone spain, and its locked, as it comes with the carrier ROM.
I already formatted the 4Gb microSD card and copy the ABI file into it.
Is there any step or application that im missing?
Thanks again for your awesome work.
Ale.
ariasale said:
Hello Caramba.
I appreciate your hard work on this one. I been looking for a solution for my phone for a long time!
I have a problem flashing this rom. When i turn on the device with the bootloader, it does not autoflash.
It shows the PALM logo and in text on top it says:
EBOOT7 Ver:V4.0.0 ExtROM:ESN
My phone is a palm treo 500v from vodafone spain, and its locked, as it comes with the carrier ROM.
I already formatted the 4Gb microSD card and copy the ABI file into it.
Is there any step or application that im missing?
Thanks again for your awesome work.
Ale.
Click to expand...
Click to collapse
OK. Reading a bit further in another thread, i found another guy with the same problem. The result was that my microSD card was too big for the bootload to run the ABI file (?). Anyway, i bought a smaller 1Gb microSD card and worked fine!!! It started to load the new ROM right away. It was worth it (10€)
BTW thanx again to caramba for the ROM. Now i have a neat UI, and i assume the phone is unlocked! Havent tried with another carrier yet.
Thank you.
Hello all.
I tried the phone with a different (movistar) sim card. it wont work. the phone is still blocked. cant believe it!
The phone shows: the sim card has been blocked from the target network.
is this normal? i mean, i have changed the rom using the caramba .abi file and the phone is still blocked. I already tried the 6.5.2 and 6.5.3.
I was assuming that changing the rom, it should be unlocked.
what else can i do to unlock it?
Thanks in advance.
This ROM has some important issues: 1. Menus like *100# simply does't work. 2. Sim contacts are not displayed even thought are selected. It only appear in SIM manager. I'm also a HTC Snap owner and i know how things should work.
Spanish Keyboard
Hello,
I am Spanish and I do not mind using the software in English, my question is, can you put the Spanish keyboard language in regional settings.
sorry for my English
Well, good job, it seems that 6.5 is somewhat faster than 6.1, however, the reason for which I have updated is because of the USB charger issue (the phone charges only when powered off) and my ISP connection. These problems persist in this version too. USB charging worked flawlessly with its Vodafone ROM, same with the Internet. Is there a fix for this?
At least can you provide a link or point to some direction where I can find what I'm looking for?
LE: I can confirm also that SIM contacts do not show in this version.
Net connections seems to work now, that leaves the sim contacts and usb charging issues.
Word Completion
Hi,
I flashed my Treo 500 with this rom as the 6.1 really didn't work on it.
USB charging does work with a cable from my laptop, but yes charging direct from a socket will only charge when the phone is off.
The biggest thing for me though is that I've got word completion on all the time as I type and I hate using it. There aren't as many options in the settings as normal and I can't find a way to turn it off.
Can anyone help?
Thanks,
Craig
I bought from Australia with ROM update to a Generic?? WM6.1 ROM and TOMTOM GPS. Was fine but died, would turn-off when answer call and you could not turn on the display again wait reset and then would seem OK. Tried reverting to the Telstra again - same issue. HTC repaired hardware under Warranty-but Telstra again and TOM wont work - new IMEI now??
This took a long time so picked up an AT&T HTC Pure but I would rather use the T8582 and Flash to WM6.5 So now the questions:
1. The "threads" don't seem to say T8582 or T8282 - just Touch HD. So is this because as far as the ROM is concerned it doesn't matter??? - Just a radio issue. Also in the Dutty threads it would seem that he has a version that is based on and HD2 ROM LEO, but for the HD. OR do I mis-understand?
2. Can USPL be installed from the sd card like the new ROM or along with the new ROM to avoid the loss on the Reset of the USPL at the end of the first step ?. The HD has the 1.54.0000 spl now - I have new laptop and it is WIN7 - doesn't use ActiveSync - got it to work with PURE but would like NOT to play with this until Touch HD is re-flashed and all OK - I want to stay with the USPL for now as I don't know that HTC has fully fixed the problem yet and it might have to go back again.
3. I thought about going to HD2 but don't want to give up stylus for some applications - like SuperCalender. Has some very small ICONs to click.
4. Pure touch screen operation is far smoother then the HD. Is this a hardware issue or a function of 6.1 versus 6.5 windows.
5. I like the PURE Voice commands so would prefer a new rom with the same MSVC??? installed or a .cab to upgrade.
6. Want a stable 6.5 ROM as I likely will only do this once. I hope.
As mentioned in one thread - I have done extensive reading here, but due to the warranty issue I want to be very carefull. I would like to do ALL from the Flash Card before work on usb connect to WIN7.
I am on the road for next three weeks with the two phones and laptop.
Your help would be greatly appreciated.
Hi XDA experts.
I have found myself in a bit of a quandry.
My HTC Ignito touchscreen failed while I was on holiday. ( no entry possible at all =-(
I just go back, and have been trying to backup the phone.
I have read all the threads I can find on the subject, and tried to install EveryWAN and Mymobilier software. The problem I have is that the device is stuck in HDD mode, as I set it to go to that mode automatically ( with hindsight a stupid move......)
Therefore EveryWan and MyMobiler will not connect to the phone.
I want to backup my contacts and download the holiday pictures.
I have seen some mention of adding a file to folder 2577 on the HDD to autorun, is it possible to use this trick to set the device to activesync ?
I am a programmer by trade, so dont be afraid to suggest something complicated and off the wall, I will try anything to get my contacts back !
I have ordered a new HTC Desire to replace it, maybe there is a way to swap data across directly ?
I have been on to HTC Support, and they are out of ideas, they say there is no way to change the activesync mode remotely =-(
Looks like i am screwed =-(
Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.
angeloski said:
Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.
Click to expand...
Click to collapse
There is stillt the posibility to put your phone into bootscreen. just try doing a hard reset and but don't reset it. you only need to get to the screen with the red, green, blue and white bar.
If you are there, it should say "serial" on the bottom of the screen. Next step, plug your phone into usb... it should now say "usb" on the bottom of the screen.
If it says usb, you should be able to Flash any rom, even without a connection to Windows Mobile Center.
Hope it words for you!
Cause that's the way it works for me, if I can't connect.
Just let me know if it worked!
Oh by the way^^ my phone is also a German one...^^
Hello there guys,
got a quite annoying prob...i love my omnia 2 phone but accidentally my lil cousin entered several wrong screen passwords and locked it.
The prob is that when i try to enter the a1b2c3 , i can't due to my keyboard different than english language.
i tried to connect in a pc and backup some data but the phone doesn't seem yo be able to connect at all.
I hope there is a solution otherwise i am gonna loose tons of data