Hi !
I have a big problem with my device and bluetooth manager in windows mobile, the problem is pretty simple, when the phone goes in stand-by mode the bluetooth connection goes dows so is there any program out there that eneble bluetooth and disable stand-by mode while is running ?
Thanks to everyone that helm me to figure out this.
Related
Hi,
Please can you help, I have had problems with my XDA2i using Tomtom 3. In order for it to work properly I need to turn the phone off whilst maintaining the use of Bluetooth to connect to my Bluetooth GPS.
The question I have is how to turn off the phone whilst maintaining the bluetooth turned On. I know how to turn the phone off using Turn On Flight Mode the problem is this turns off everything, Bluetooth and all!
I have read a post that to turn off the phone I just press the Hang up button for 3 secs, This idea doesn't seem to do anything.
If I turn on the Flight mode then try to turn on the Bluetooth, it says I must turn off flight mode which in turn turns on the phone!
Can you help
Cheers
Blue
Can't answer your question other than 1) don't understand why your Tom Tom won't work with the phone on 2) holding the red "end" button for 3 seconds will only disconnect you from GPRS connection.
Your Tom Tom should work with a BT headset, BT GPS and the phone radio on all at once.
Check your set-up and you'll find it works.
Tom Tom 3
I have the same issue if my phone rings whilst using Tom Tom it will stop the navigation system and I have to reset the XDA...I have found that seting flight mode on and then switching it off actually doesn't renable the phone just wifi and bluetooth the phone switches itself on when you make a call..
I thought that was the case, My XDA2i software must be bugged at it re-enables the phone if I do that.
My old XDA2 worked a treat, I just turned on Flight Mode, then Turned it off and the Bluetooth worked and the phone stayed off. To turn the phone on I went into the phone and chose settings it then prompted me for a "do you want to turn the phone on" question.
My New XDA2i doesn't do that, I turn on flight mode, then turn it off and all 3 (wirelss, Bluetooth and Phone) come back on.
If I play around with the XDA2i I can manage to get the phone to stay off but it is problematic.
Any Help?
Cheers
Lee
Ok here is how to do it, ive just done it without having a problem.
1) Start Tomtom with it communicating to the Bluetooth GPS and Phone is on.
2) Whilst tomtom is running turn on flightmode (turning off all Wireless and Phone)
3) Go back into Tomtom and it should have lost its connection to BT you will see it hasn't disabled the GPS though!
4) Turn on BT in the Bluetooth Settings in the settings menu of the XDA2i
5) XDA2i will then pop up a message saying turn off flight mode first, try to close that popup and it will take several seconds whilst it closes the popup.
6) Hey presto the delay was caused by the XDA2i trying to turn on Wirelss with out the Phone.
7) You now have just wirelss on and not the phone.
Let me know if this works for you, it has for me each time.
Cheers
Lee
Hi ! I own a brand new Palm Treo 750V, unfortunately there seems to be something wrong with BT. Always when I try to activate BT it is not going to activate. Once out of 50 tries activates the BT, but will lose connection soon. Does anyone has a hint ? Would highly appreciate your comments. thanks dirk
I have the same problem when trying to connect to my Audi's build-in bluetooth phone. All my previous phones work, but the treo 750 seems to give some issues. Everytime it connects to the car for about 1-2 minutes and then it disconnects. The problem is that it wil connect and disconnect over and over and over... therefore setting off a really anoying beep. Hopefully this issue will be fixed with WM6.0
Had this too in the past. When you connect to your car just keep your screen active without keyguard activated.
Thats the way i connect to my car without any trouble.
When i connect the first time to my car and leave the car after a while and try to reconnect it again then often it doesn't connect anymore, but when the screen is active it connects all the time.
Also from time to time my bluetooth doesn't turn on ( on treo), seems like a bug and have to reset the device.
Hi,
When I actavate the wifi on my SPV E650 (vox), and the phone goes in low power mode (screen goes black), after 10 secondes the WIFI disconnect itself (that's OK), but there is a BIP when it does it.
After even when the keyboard is locked, if I press a key the Wifi seems to wake up for a while, then disconnect again and BIP again.
Is there a way to
1) get rid of the BIP
2) avoid the WIFI to try to reconnect when the keyboard is locked ?
If I deactivate the WIFI completly, it stop beeping but then my wifi don't work anymore...
In the power mode of the wifi settings there is an option to have the phone not deactivating WIFI when the screen goes off. But then you have to manually put on / off your wifi.
Unfortunately WIFI drains a lot your battery...
Ka
Thanks that could do it.
Actually now I'm manually deactivating the WIFI unless I really want to use it.
But I'm upset that I can't get rid of the beep when the WIFI is deactivated.
hi
i have realized that all wm6 s that i have installed crash when you turn wifi on and your wm goes to standby and someone calls you when the ppc is in standby mode and wifi turned on.
Hey Guys,
i have a problem with my Samsung Omnia 7.
When my phone ist running and i want to activate bluetooth, the screen displays "searching" (in german "Suchen"). My phone wont find a device which is in the near and where i know, that i can connect normally.
I know that, because, when i turn bluetooth on and restart my phone, then after restart, i will find all the bluetooth devices in the near and i can connect for example with my laptop and play music from my phone on the laptop or hear the voice when im calling with someone.
But when i turn bluetooth off and after this on again, there is only the screen which diplasy "searching".
My bluetooth works only if after i turn bluetooth on before i restart my phone.
Sorry for my bad english , i hope you understand my problem.
Is there anybody with a same problem or anybody who can help me?
The HD2 has similiar problems with bluetooth and wifi together. However I'm not an Omnia 7 user.
Anyway, you can ask it in the Omnia 7 forum (which would be the correct one) or even better: Use the search tool and browse all existing bluetooth problems thread to see if someone has found a solution (There are plenty of it...). Thanks
thanks for your advice. after u told about the problem with bluetooth and wifi togehter, i just tested what happens if i activate wifi and bluetooth togehter and i was suprised to see that my bluetooth works. i can avtivate and deactivate and it just works in connection when wifi is "on". if i turn wifi off, bluetooth wont work anymore...
but thanks, so i have a workaround and can use it, i will search in thread with same problems, thanks!