Database Info

[Q] HTC Trophy (Verizon) launch kit???? HELP!!!

I purchased an HTC trophy launch kit phone for Verizon from Ebay. I would like to know how I can get rid of the demo loop on the phone and get the phone to work like one without the loop. How can I get this phone to factory status without the loop? I have tried a few different things but none work. Right now the phone boots up and plays demo and that is it. I can't access anything it just says .....loading.... and doesn't open anything. If someone could help I would really appreciate it. Thanks.

volblood said:
I purchased an HTC trophy launch kit phone for Verizon from Ebay. I would like to know how I can get rid of the demo loop on the phone and get the phone to work like one without the loop. How can I get this phone to factory status without the loop? I have tried a few different things but none work. Right now the phone boots up and plays demo and that is it. I can't access anything it just says .....loading.... and doesn't open anything. If someone could help I would really appreciate it. Thanks.
Click to expand...
Click to collapse
Maybe flashing a rom from here will solve your problem...
http://forum.xda-developers.com/showthread.php?t=924333

I've tried about 4 of those different roms and one of them is what put the device in it's current state. When trying to install a rom now it doesn't even recognize the device. Does this device need to be unlocked before installing a rom? I would like to know step by step how to resolve this issue. Which rom would be best for me to use? Since this is a Verizon device I figured the Verizon rom would work correct? I cant check any info on the phone. Thanks.

The demo kits are set up for use as store demos, you may be stuck.

volblood said:
I purchased an HTC trophy launch kit phone for Verizon from Ebay. I would like to know how I can get rid of the demo loop on the phone and get the phone to work like one without the loop. How can I get this phone to factory status without the loop? I have tried a few different things but none work. Right now the phone boots up and plays demo and that is it. I can't access anything it just says .....loading.... and doesn't open anything. If someone could help I would really appreciate it. Thanks.
Click to expand...
Click to collapse
the only way would be to wait for someone to get a working official rom, im in the same positon but i only use it for every thing else but live its activated so im fine btu if your so worked up abotu it see if you can return it if not, resell it on ebay, same thing when i got demo thunderbolt sold that and made a quick 300 bucks

[Q] Nexus S brick power off

Godd afternoon to everyone, I have a problem with my nexus s. as the title, broke the power button .. so out of the blue. I solved the problem by installing apk that allowed me to work around this problem .. so I decided to change rom: then download and install everything, just that when you install the gapps I realized that they were corrote! so I'm not part of the setup wizard, I can not access the options, I can not do anything at all and now I have a phone that is as good as a doorstop, since the only thing I can do is connect it to your PC as a mass storage . I tried using the adb without success to be able to start in bootloader mode but without success with "error: device not found". I do not know if the debug mode is active but do not think so! I do not know what to do I hope someone can give me good advice on what to do. Hello to all.
p.s. sorry for translation (google docet)

19pici87 said:
Godd afternoon to everyone, I have a problem with my nexus s. as the title, broke the power button .. so out of the blue. I solved the problem by installing apk that allowed me to work around this problem .. so I decided to change rom: then download and install everything, just that when you install the gapps I realized that they were corrote! so I'm not part of the setup wizard, I can not access the options, I can not do anything at all and now I have a phone that is as good as a doorstop, since the only thing I can do is connect it to your PC as a mass storage . I tried using the adb without success to be able to start in bootloader mode but without success with "error: device not found". I do not know if the debug mode is active but do not think so! I do not know what to do I hope someone can give me good advice on what to do. Hello to all.
p.s. sorry for translation (google docet)
Click to expand...
Click to collapse
Hello,
Maybe you can use this good guide ?

which guide?

cyrillem28410 said:
Hello,
Maybe you can use this good guide ?
Click to expand...
Click to collapse
maybe ,but, where?

sell
thanks to everyone for the availability, but in the end, having no solutions, I decided to sell the nexus s! If someone is planning to buy it, because it is able to repair it or maybe in order to use the pieces as a spare, it's on ebay with this title: Nexus s Model GT-IT9020T (i can't post any link)

19pici87 said:
thanks to everyone for the availability, but in the end, having no solutions, I decided to sell the nexus s! If someone is planning to buy it, because it is able to repair it or maybe in order to use the pieces as a spare, it's on ebay with this title: Nexus s Model GT-IT9020T (i can't post any link)
Click to expand...
Click to collapse
Before you sell it.. I have a thought, couldn't hurt right?.. Nexus Root Tool Kit can take a "bricked" phone and re-flash to stock, oem lock and unroot.. There have been posts that said that flashing to stock has helped with the power button, assuming that it isn't actually broken and just needs reset.. So give it a try, you can PM me if you have questions..
Since you are selling it for parts, this could let you sell it as working, or you could keep it and close the sale..

[Q] Phone stuck on "this build is for development purposes"

Yep so I tried to install CM11
and the last thing was to:
fastboot flash boot boot.img
and that was it. Cannot restore my Nandroid backup - it doesn't boot back up.
Just gets stuck at the HTC page with "This build is for development purposes".
I think I need the stock boot.img but it is no where to be found.
Any help??

Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.

Who did you find to restore your phone?
808phone said:
Just paid someone to get the RUU and restore then phone. I have no idea how he found the RUU since no one else here has it. If they have it they are not sharing it.
Click to expand...
Click to collapse
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?

so basically you paid a guy to google the right RUU???
all you had to do is check your CID (its written on fastboot) and search for that, they really arent that hard to find!!
http://forum.xda-developers.com/showthread.php?t=2140967
also if you're going to keep flashing different roms its also a good idea to keep that RUU on your pc somewhere!!

There was no matching ruu. What no one told me was that you could use a newer ruu than the one you have. Another thing, before you judge, there were no replies to help me so I had no choice. Since then look how many times I have helped others.

chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.

In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app

zubeedubs said:
In not judging at all man, i just couldnt understand as to why you couldnt fine the info... They guy you paid is no different to you or me, che just searched harder... As for the ruu the name itself tells you its an update... No biggie im glad you got it worked out in the end
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.

808phone said:
Did you not read what I said? THERE WAS NO MATCHING RUU! Read OK????
No one told me you could use a NEWER RUU.
If someone - perhaps you had told me, yeah fine, I could have done it. No one helped ok?
BTW: I did a nandroid backup, I had installed custom recovery, rooted with superSU etc... I had adb, fastboot working too. Because I couldn't get an answer I paid someone.
If you have a JTAG machine and you were running a business then maybe you are just like him.
Click to expand...
Click to collapse
dude theres no need to get fassy about anything... unless your one s is knock off means that there is a RUU for your device and that you simply couldnt find one in the small amount of time that you searched for one...
and just to gnaw a little more at your flawed logic and sour attitude RUU means "ROM UPDATE UTILITY" so i guess your right in not being able to use a newer one... :good:
AND BTW.. i dont have a jtag but i do run a business and in my line of work we see folk like you everyday, ever so quick to get pi**ed at someone for THEIR OWN mistakes!!!
and maybe if youre that impatient and wound up for your own calamities it serves you right to have paid for a simple task..
---------- Post added at 08:21 PM ---------- Previous post was at 08:14 PM ----------
chrons6 said:
I have the same problem. Who did you find to restore your phone? Is it possible that I could contact them?
Click to expand...
Click to collapse
have a peek at the RUU thread in the dev section and follow the instructions... it really isnt that difficult!!!

? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.

808phone said:
? and in my line of work we see folk like you everyday
Right and that's why I have more thanks and posts than you for helping people.
Yes, I know that a RUU has a version number too. I know what it means. If you even took the time to realize that after having to pay, I helped out other people after that so they wouldn't have to pay.
I guess you don't read. I said you COULD use a newer version of the RUU but no one told me.
Where were you when I asked for help? Never mind, you go about yourself and I will continue helping.
In my line of work I know people like you too. You are the type of person people avoid so create your own thread and stop jumping in with unhelpful info.
Click to expand...
Click to collapse
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!

808phone said:
As I previously posted, you can use a newer ruu than the version you have installed. That's what the guy did.
Click to expand...
Click to collapse
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.

same problem
zubeedubs said:
about your deluded logic: paying a guy to fix your mistakes is the right info??? seriously?? and thats supposed to help the next guy more than directing him towards the right RUU??? boy you really are a contribution to the comunity...
about your thanks rating: i signed up last month and youve been here since january if youve ever contributed anything on here then you should have more thanks than me, its basic math, also i think i should point out that its a forum and not "thank marathon" nobody wins a prize for them...
as far as helping people: i suppose you have, i dont really care that much either..
lastly: i came on your thread infact to lend a hand, until i saw that youre actually lazy and ready to fire off your mouth at strangers for nothing apart from stating the obvious truth...
so as of now you can take your all your thanks and try and cash them in for the next phone you softbrick and "need" to pay someone else to fix...or maybe not!!!
as for me this discussion is closed as i can only feed a troll so much!!!
Click to expand...
Click to collapse
Just to say that I

chrons6 said:
I understand how the RUU works and how to use it. My problem, though I hope not, may be slightly more unique?
I had previously rooted by ONE S T-Mobile version and it had been working fine. I then decided to try out another rom. I likely flashed an incorrect boot img because it would only reboot into fastboot, but would still allow me to go into recovery. I went to recovery and restored my nandroid backup; however, now the phone will get stuck on the opening HTC screen the red language on the bottom, "this build is for development purposes only." It will hang on this screen for about 20 seconds and then turn off. No loop. When I attempt to power up again, I get a quick horizontal flash of light across my screen and then the orange LED comes on in the top left corner indicating the phone is charging. I then hold down power and again the phone gets stuck on the opening HTC screen with the red language.
My problem is that I cannot get the phone into fastboot
I've received advice on how to enter the bootloader: power off the phone manually by pressing power for 10+ seconds. Then I' should be able to enter the bootloader and fastboot. (Vol down + power)
Unfortunately, no matter how many times I try, using the above method and a variety of other methods, I still can't get past "HTC developmental purposes only" screen. I'm not new to android and have experience with a number of phones, but this is my first HTC. Pretty frustrating thus far. Rather than spend many more hours pulling out my hair and continually going in circles with no progress to show for my efforts, I'd rather pay someone to make the necessary fixes for me.
Any additional advice would be much appreciated.
Click to expand...
Click to collapse
Thankfully I finally figured out how to consistently get my phone to enter into Fastboot; however, no the trouble I'm having is finding the proper RUU. I've tried the 3 T-mobile varients available in the RUU depository found here
http://forum.xda-developers.com/showthread.php?t=2094414
But alas, while I am able to run the RUU program, which enters my phone into a mode where the screen is all black expect for the HTC logo in the middle, I keep on getting error codes. Are there more than 3 RUU varients identified in the depository?
Oh, I should note that I was also able to get into recovery, but my SD was unable to mount so I can't find my Nandroid

Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app

zubeedubs said:
Youre at least half Way there, what recovery are you using?? If you can get your PC to see the device try and format the memory to fat32 from PC...
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.

chrons6 said:
I believe I'm using TWRP 6.3.0...I'm at work right now and without the phone, but I'm fairly confident that's the recovery. I'll to get the phone into USB mode and see if I'm offered the opportunity to format the memory.
By the way, thanks for the help...it's much appreciated.
Click to expand...
Click to collapse
That won't help. You can fix the sdcrad bug by flashing stock recovery via fastbot and preform "factory reset + clear storage"

[Completed] [Q] Re-installing stock android

Hi guys, I'm pretty new to rooting so tell me if i need to give more info etc cause I know i can be a bit vague.
So I rooted my phone no problem via the all in one kit thing and installed cyanogen, but this was right before the big android update so I wanted to switch back and update to that, but somewhere along the line i got rid of all the Roms (I think)
The stage it's at now: I can boot normally but the startup wizard fails, I assume this is because the stock operating system isnt hooked up to run, regardless I can't find a copy or figure out how to run it. (before my TWRP seemed to stop running on startup)
Bootloader: I don't know how it ended up relocked after I'd unlocked it but am guessing that is why i cant access the custom recovery at the moment (twrp)
If anyone is able could you walk me through, or point me to a guide to show:
How to unlock a relocked phone,
How to get a Stock version of Android (anything after 4.0 I guess because it will auto update?) running on there
Tell me if I'm being dumb in any part of this (apart from pissing about with things I don't understand, haha)

OK, So i'm unlocked and back onto TWRP, that was easy though, What I do need help with is working out how to install the factory Operating system again, last time I tried that is what caused the relocking etc so any help would be amazing.
Thanks, Simon

Redijedeye said:
OK, So i'm unlocked and back onto TWRP, that was easy though, What I do need help with is working out how to install the factory Operating system again, last time I tried that is what caused the relocking etc so any help would be amazing.
Thanks, Simon
Click to expand...
Click to collapse
Is this the same device as the one you are asking about in? [Q] How do I know what RUU to use, and more by Redijedeye

sd_shadow said:
Is this the same device as the one you are asking about in? [Q] How do I know what RUU to use, and more by Redijedeye
Click to expand...
Click to collapse
Sorry yes, meant to close this post now that this particular problem was kinda sorted but didnt get round to it last night. Unless you know a way to get the correct firmware for the wifi? Just seems strange it'd update wrong.

Redijedeye said:
Sorry yes, meant to close this post now that this particular problem was kinda sorted but didnt get round to it last night. Unless you know a way to get the correct firmware for the wifi? Just seems strange it'd update wrong.
Click to expand...
Click to collapse
No, I don't.
I consider this [Completed] and have thread closed.

LG Stylo 2(K540)- At this point I'm begging for help!

I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!

send to lg said stop working no luck with tihs hard brick

Source code to rom¿?
I ran into basically the same situation as you. I'm currently downloading Android open source project on to a fresh install Ubuntu 16.04. I am currently in the middle of running sync.
I'm curious if there is anybody out there who would be willing to give a few pointers, on compiling the ROM from LG open source code. They told me I had to use it in the readme.txt.

Im a noob with fair knowledge of modding and stylo not stylo 2. There's no way to say for sure if this will work but on lg mm on h631 u need to unlock dev option in settings 1st. Make sure to check off oem unlock and usb debugging. Connect to pc and you will get a popup or 2, one will ask to allow pc to connect to phone, the second is to allow usb debugging. After you allow both, open cmd in your adb fastboot folder. Type " adb reboot bootloader." should reboot the phone to bootloader/fastboot mode. Then you type " fastboot oem unlock." you will see sending.. Once sending is done type " fastboot reboot." when the phone restart you should see bootloader unlocked on splash screen. Then i rooted with kingroot. Then use rashr to flash twrp. Then used twrp to flash supersu to get rid of kingroot.. My h631 now in business and i just started working on a port for lg ux 5.0. This is the guild i use for a better idea http://forum.xda-developers.com/lg-g-stylo/how-to/guide-lg-g-stylo-how-to-root-t-mobile-6-t3333916. You might need lgflashtool and kdz to unbrick..

NO NEED to beg.
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis

Hello Sir, I ran into same problem trying to root. If you can, can you please send me a link so that i can use my phone again. Thank You it will be greatly appreciated

can some one help me. i cannot use adb to unbrick

Please send me the link
facorbin said:
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Click to expand...
Click to collapse
Hi, can you please send me the link? I need it bad thx

if you cant boot into dlmode then your hard bricked, so find a way to get back to dl mode/recovery

BIN File
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware

estebangtz said:
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
Click to expand...
Click to collapse
cna you possible sned me it I might be able too

no longer have the bin file
HERPDERP202 said:
cna you possible sned me it I might be able too
Click to expand...
Click to collapse
I am sad to say my computer stopped working and just got it back today, all my information was lost so I no longer have the bin file

bsimpson1858 said:
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
Click to expand...
Click to collapse
you can go into download mode by pressing volume up key and inserting usb cable .press the volume up until you see download mode a firmware readed by z3x box is available on clamgsm forum you can flash it with z3x box crack .