Related
Original 32B Thread: http://forum.xda-developers.com/showthread.php?t=547691
Original Dream Thread: http://forum.xda-developers.com/showthread.php?t=546984
Changed wlan.ko and AudioPara4.csv and kernel.
Many thanks to Drizzy, haykuro, Amon_RA, skittleguy, anyone else who has contributed!
Download:http://www.briancrook.ca/magic/signed-drizzy-v3_Full_Hero_32a-gbo_v2.zip
md5sum: eda15ebd75b650bfd7880a28a4c7efc9
New version with gobddina/Tiger Tael's new 32A kernel
Download:http://www.briancrook.ca/magic/signed-drizzy-v3_Full_Hero_32a.zip
md5sum: dd461864027aad3a3a3595c99427f3a0
Thank you thank you thank you!!!
What kind of performance are you getting from it? I love my JacHero rom that I'm running except that A2DP isn't working which makes it a no go. It's time to try out another one that has A2DP support. (I know Bluetooth headsets wont work on any hero).
bcrook,
Does your port require partitioning of the SD card as per Drizzy's instructions or can i just wipe & flash?
Thanks,
Rob
rgbc said:
bcrook,
Does your port require partitioning of the SD card as per Drizzy's instructions or can i just wipe & flash?
Thanks,
Rob
Click to expand...
Click to collapse
I only have one Fat32 partition and it seemed to work. The poor dream/32b suckers need all the swap they can get
thanks bcrook,
No problems flashing with single fat32 partition, rom seems nice & snappy so far, my Fatal1ty_Hero install from early July was clearly overdue for an overhaul as it was becoming quite slow
Cheers,
Rob
I did not partition my SD card and it is running smoothly. Thanks again to bcrook for porting it for us.
Will this work on Rogers Magic?
EDIT: Nevermind, I got it to work. Works Great! Thanks!
bluetooth bad....
how about the led? if we charge Magic does the led turn On red?
limkoksoon said:
bluetooth bad....
Click to expand...
Click to collapse
Always is with hero builds.
lesjaw said:
how about the led? if we charge Magic does the led turn On red?
Click to expand...
Click to collapse
I believe this is usually messed up with hero ROMs too. I am not running this ROM so if anyone can comment that would be great.
I've been using the v3 from the original 32B thread with no WiFi problems.
What has been changed in this version?
rosie not launching.... damm... have to recover...
MikLSP said:
I've been using the v3 from the original 32B thread with no WiFi problems.
What has been changed in this version?
Click to expand...
Click to collapse
This is for 32a. So the kernel, wlan.ko, AudioPara4.csv.
Damn this Rom so tempting..Jiaaahhahaha...
Downloading...speed is <10kbps...somebody should mirror this...
Edit..now it is 45-50 kbps...
bcrook said:
This is for 32a. So the kernel, wlan.ko, AudioPara4.csv.
Click to expand...
Click to collapse
Oh, of course..oops! Don't know how I didn't see that
lesjaw said:
Damn this Rom so tempting..Jiaaahhahaha...
Downloading...speed is <10kbps...somebody should mirror this...
Edit..now it is 45-50 kbps...
Click to expand...
Click to collapse
I just tested and was getting 600Kbps+
Use multithreaded downloads
bcrook said:
I just tested and was getting 600Kbps+
Use multithreaded downloads
Click to expand...
Click to collapse
Mostly 80 Kbps..Speedy enough for my connection..
Done Flashing..Seems Great..
One thing notice, the led didn't turn on red when charging..just like the most hero rom..
is anything having troubles getting 3G? I can't access the browser and I have no 3G icon in my notification bar.
EDIT: Sorry again, just took a while to load up. But ya bluetooth still no worky.
ah bcrook, you are my hero!
I wonder should i change from jacxrom 1.2 to this..
anyone test and see which one is better?
Working Tethering!!!!! w/ Froyo 2.2
http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0_5-pre7.apk
i take no credit for this .apk found it in the fresh evo 3.1.0.1 forum but i think it should work on other roms as well. Please post your results thanks
edit: this is with the stock kernel
VERIFIED WORKING!!!!
Fresh Evo 3.1.0.1
Stock rooted 3.26.651.6
Yeahhhh, working in stock rooted!
Sent from my EVO!
Yea it works on stock rooted
Yup, works stock rooted. I was just complaing about it not working and bam, updated today.
Could anyone verify if this would work on non-root? Don't have my friends Evo here today.
Thanks
adamq3b85 said:
Could anyone verify if this would work on non-root? Don't have my friends Evo here today.
Thanks
Click to expand...
Click to collapse
phone has to be rooted in order to use this program
adamq3b85 said:
Could anyone verify if this would work on non-root? Don't have my friends Evo here today.
Thanks
Click to expand...
Click to collapse
It is a root only app.
yeah sorry just noticed this is wirelesstether..
I believed it was the stock froyo tether app.
Would be nice if someone tried extracting the Froyo tether app from the Nexus One.
adamq3b85 said:
Would be nice if someone tried extracting the Froyo tether app from the Nexus One.
Click to expand...
Click to collapse
if sprint blocked the one in the evo what makes you think the onefor the nexus one would work? Same program essentially, this program works just fine
the stock android tether doesn't need root.
adamq3b85 said:
the stock android tether doesn't need root.
Click to expand...
Click to collapse
you're right but sprint blocked it so if they ported over the one from the nexus one i doubt it would work
Hey everyone, the latest WiFi Tether app that was released today is working for all 2.2 Rooted Sense ROMs as far as I know. I'm still running the .3 pre-release and it's working for me. I did not flash any custom kernels, just the plain rooted Froyo/Sense ROM. Limited to TWO connections at this time but it IS WORKING.
http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_5-pre7.apk
Wonderful, gonna try it out now, tx..
When I checked 30 minuted ago this was not on the list. I downloaded pre-6 and finally got it working. Someone said theirs wouldn't work on pre-7.
Is anyone else experiencing unreliable tethering? I tried a clean install of Fresh Evo 3.1.0.1 with both the stock kernel and with netarchy's 3.7.6c. Using pre7 I can at least get connected with the stock kernel, but I can't stay connected. After a minute or two my connection always drops.
WiFi Tether has been working since pre-5 for me with the custom kernel on this site.
ForrelZ said:
WiFi Tether has been working since pre-5 for me with the custom kernel on this site.
Click to expand...
Click to collapse
Correct, but until today you had to flash the custom kernel for it to work. Now this works even on the stock kernel.
yea i just tried this with fresh 3.1.0.1 no custom kernel (waiting for 8mp) and it works perfect, infastructure mode too not stupid ad hoc!
your a little late OP i already created a thread about this:
http://forum.xda-developers.com/showthread.php?t=744987
Now that we have the daily BS out of the way...
This ROM is much like the latest Fission. It is just based on Android FRG83 2.2.1.
We will have same bugs as before. The compass calibrate and the random MP3 ringtone thing.
If you want to know what is different with 2.2.1 FRG83 then please use google to look it up.
What to expect from ROM:
It has been upgraded with Android 2.2.1 FRG83 system files. The app and framework folder remain the same as in Fission 1.2.1 for now. RC 1 will be used to see if any problems come up. Then we will move to RC2 that will have updated apps to match a 2.2.1 google build if any apps need to be updated.
If you are coming from 1.1 and above no need to wipe cache/data.
If you are coming from a different ROM then SBF before moving to Fission ROM.
If you are having problems that many others users are not having then SBF.
If you plan on sticking with Fission for awhile, then SBF also.
Download HERE
your download link is not working
joshschlenker said:
your download link is not working
Click to expand...
Click to collapse
thanks...should work now.
upgrade from 1.2.1
I try and follow directions to a tee..... directions above state no wipe when coming from 1.1, so what about coming from 1.2.1?
Thanks for all you do!
Also still looking for themer.rar that was posted back in 1.0 fission forum, would like to get a theme out for FISSION
thanks!!!!!!!!
derte said:
I try and follow directions to a tee..... directions above state no wipe when coming from 1.1, so what about coming from 1.2.1?
Thanks for all you do!
Also still looking for themer.rar that was posted back in 1.0 fission forum, would like to get a theme out for FISSION
Click to expand...
Click to collapse
1.1 and above no wipe.
Sent from my DROID2 using XDA App
upgrade from 1.2.1
zibrah3ed said:
1.1 and above no wipe.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Thanks man - just wanted to make sure before I pulled the trigger
Just a heads up, the banner that runs on install still says FRF 91 Fission.
Thanks and Paypal is getting a hit in 5 minutes!
EDIT: Install went fine, no problems, but, still stuck on 1x. Thinking of restoring 1.2, see what happens. Also, I just dropped a $10er into your coffee fund. (not a bribe, I promise)
EDIT2: *22899 fixed the 1x issue. Thanks all.
I swear I'm not being lazy or anything but I have tried googling the difference between the two android builds and I really can't find. Anything special? Should someone who just installed the 1.2.1 bother upgrading or are they very much comparable?
Sorry for the inconvinience.
blustosa said:
Should someone who just installed the 1.2.1 bother upgrading or are they very much comparable?
Sorry for the inconvinience.
Click to expand...
Click to collapse
If you just flashed 1.2.1 just stay there there are a few bugs that are being worked on (nothing major don't worry) I bet there will be a new version out in a few days or so (just speculation)
The biggest difference is that it's running on Android 2.2.1 instead of 2.2.0 that we got stock. Note this is different than VZW 2.2.0 upgrade to 2.3.2 or whatever the newest OTA update is. (Fission users won't get or need the update.)
Sent from my DROID2 using XDA App
No camera after 1.2.1 to 2.0 RC1
Hi,
Thanks for all your hard work on this! Have a possible bug report here. My camera won't work after I flashed from 1.2.1 to 2.0 RC1. Any suggestions? Would it be safe for me to flash back to 1.2.1 (and if so would I need to wipe data and cache?)
hwolfe said:
Hi,
Thanks for all your hard work on this! Have a possible bug report here. My camera won't work after I flashed from 1.2.1 to 2.0 RC1. Any suggestions? Would it be safe for me to flash back to 1.2.1 (and if so would I need to wipe data and cache?)
Click to expand...
Click to collapse
Look at post #6 on this thread at DroidForums http://www.droidforums.net/forum/te...on-vanilla-2-0-rc1-android-frg83-2-2-1-a.html, Angdroid/MotoBoy camera is an issue that has to be fixed
Also, if you made a backup at 1.2.1, You should be able to just boot into clockwork and restore yourself back to 1.2.1 with no trouble
This update contains a bug fix for our update notification system, as well as an important security fix. It is recommended that all users running a version of CyanogenMod prior to 7.0.3 update to this release.
Announcement:
http://www.cyanogenmod.com/blog/cyanogenmod-7-0-3-released
gu1dry's post on forum.cyanogenmod.com:
http://forum.cyanogenmod.com/topic/20122-cyanogenmod-7-for-the-htc-desire-hd-v703-5-may-2011/
CyanogenMod:
Latest version: update-cm-7.0.3-DesireHD
Download: link
Mirror: link
MD5sum: 0bf02583cd1bf31021de17210ec56f37
Google Apps addon:
Version: gapps-gb-20110307
Mirror: link
Mirror: link
after applying the update for the phone showed I have an empty battery and plugged in to charge again after a minute showed again full strange
I read somewhere there is a newer gapp?
So, updated from 7.0.2 to 7.0.3, btw. with 7.0.2 i had the best battery life of all time with my DHD. From yesterday 7am until now (27 hrs) i stay with 48% left. Various Exchange Push, a bit calling & playing with Widgets.
Leechoonhwee said:
I read somewhere there is a newer gapp?
Click to expand...
Click to collapse
For 2.3.4 (7.1.0 RC) and still Beta.
Friendly reminder that if you are using your own choice of radio / RIL that you will need to reflash the RIL zip.
Sent using witchcraft via XDA Developers Premium App.
sorry 4 the noob question
i am currently using cyanogenMod 7.0.2 on my htc desire hd
how can i update my to CyanogenMod 7.0.3 ?
i download the file i needed, now how do i update ?
please point me to the right direction
thank you
stanleyyyy said:
sorry 4 the noob question
i am currently using cyanogenMod 7.0.2 on my htc desire hd
how can i update my to CyanogenMod 7.0.3 ?
i download the file i needed, now how do i update ?
please point me to the right direction
thank you
Click to expand...
Click to collapse
Put the file on your SD Card and do it the same way how do you installed 7.0.2. Use CWM and select your file (Install .zip from SD-Card). Just install it without wiping or deleting anything. But do a nandroid before (CWM Backup)!
Hi, since there seem´s to be some issue´s with 7.0.3 (read on CyanogenMod.com/blog) can´t you release an update patch for only the security fix and the bug fix for the update notification system??
I´m on 7.0.0 and I´ve tried 7.0.2 & and it´s not working any good for me, so updating to 7.0.3 seem´s like a shot in the foot
Thanxs for any input..
Well i wonder where you guys get your RIL's from, i just can find RIL's that are only for Sense Roms based on Gingerbread.
@peste
Would you mind sharing your RIL you are actually using, cause im also from Germany and i would like to give your Radio a try.
baltazar.nilsson said:
Hi, since there seem´s to be some issue´s with 7.0.3 (read on CyanogenMod.com/blog) can´t you release an update patch for only the security fix and the bug fix for the update notification system??
Click to expand...
Click to collapse
I thing you missunderstand it ... 7.0.3 is without this notification bugs. Read the blog again.
An Another Question ...
At the moment i use 7.0.2 and this Radio: 12.54.60.25P_26.09.04.11_M2
I dont flash a RIL ... when i update to 7.0.3, can i flash a ril that is compatible with my Radio 12.54.60.25P_26.09.04.11_M2? Or just flash 7.0.3 without a ril?
After the 7.0.2 release there was a Patch "use 2.2 htc ril" ... is this includet in 7.0.3? Or is it just in the nightlys that based on 2.3.4?
Regards
chrissooo said:
I thing you missunderstand it ... 7.0.3 is without this notification bugs. Read the blog again.
An Another Question ...
At the moment i use 7.0.2 and this Radio: 12.54.60.25P_26.09.04.11_M2
I dont flash a RIL ... when i update to 7.0.3, can i flash a ril that is compatible with my Radio 12.54.60.25P_26.09.04.11_M2? Or just flash 7.0.3 without a ril?
After the 7.0.2 release there was a Patch "use 2.2 htc ril" ... is this includet in 7.0.3? Or is it just in the nightlys that based on 2.3.4?
Regards
Click to expand...
Click to collapse
ohh, okey, thanxs for pointing that out for me.. Didn´t see that.. Well, will flash it tonight then
chrissooo said:
An Another Question ...
At the moment i use 7.0.2 and this Radio: 12.54.60.25P_26.09.04.11_M2
I dont flash a RIL ... when i update to 7.0.3, can i flash a ril that is compatible with my Radio 12.54.60.25P_26.09.04.11_M2? Or just flash 7.0.3 without a ril?
Click to expand...
Click to collapse
RIL's are not compulsory but are helpful to get the best results by matching the Radio. You can therefore flash CM7.0.3 but since CM7 will change the RIL to match the recommended radio you should then flash the correct RIL to match the Radio you are looking for which for 26.09.04.11 on CM7 ROM is 2.2.1003G.
There is a link to this RIL in my sig.
[EDIT]
apsis said:
@peste Would you mind sharing your RIL you are actually using, cause im also from Germany and i would like to give your Radio a try.
Click to expand...
Click to collapse
See my link, you are running same radio so use same RIL.
@Mr_JMM
thx mate, i allready flashed both. now i will test the new radio with RIL a bit
back to topic:
I have no problems with CM 7.0.3 so far, had a few issues like connecting my Device via USB with my computer made it reboot several times but after unchecking and checking USB Debugging again it is gone. Im also using Lord Clockan's Kernel v.3.1 to avoid the the Wifi-Error Bug. It feels not that snappy like it did with the newer Kernel on 7.0.0, but i will give it some time. SetCPU is installed, running onDemand min.230 max. 1228 and Screenoff Profile using Smartass with min. 122 and max 537. I also have no Issues with Video Playback like some people stated on the blog.
Let's see how it will be doing withing the next days
Hi,
First time using this rom, and not answer to my query in the webpage:
1) where to get the marketplace program? i did install the google apps, but nothing happen
2) How to synch google account to reload back the apps? or this is not possible to do with this rom.
thank you.
seacoral123 said:
Hi,
First time using this rom, and not answer to my query in the webpage:
1) where to get the marketplace program? i did install the google apps, but nothing happen
2) How to synch google account to reload back the apps? or this is not possible to do with this rom.
thank you.
Click to expand...
Click to collapse
MarketPlace installed by default.
If you have a google account and you have previously synced your contacts, settings, etc. Everything will be imported back from the google server.
apsis said:
Well i wonder where you guys get your RIL's from, i just can find RIL's that are only for Sense Roms based on Gingerbread.
@peste
Would you mind sharing your RIL you are actually using, cause im also from Germany and i would like to give your Radio a try.
Click to expand...
Click to collapse
Mr_JMM said:
RIL's are not compulsory but are helpful to get the best results by matching the Radio. You can therefore flash CM7.0.3 but since CM7 will change the RIL to match the recommended radio you should then flash the correct RIL to match the Radio you are looking for which for 26.09.04.11 on CM7 ROM is 2.2.1003G.
There is a link to this RIL in my sig.
[EDIT]
See my link, you are running same radio so use same RIL.
Click to expand...
Click to collapse
I don´t use this RIL anymore, now using the standard CM7 RIL again. Got only connection problems (call drops, signal loss) all 3 minutes. With standard RIL all seems to be good. On o2 Germany.
i think 7.0.3 is buttery smooth..and has improved lot of issues from the last rom.
Kali- is in charge of this rom plz follow this thread
http://forum.xda-developers.com/showthread.php?t=957336&highlight=CyanogenMod
This is an all in one mod similar to the one RandomKing did for EG22. This includes a framework.jar, services.jar and settings.apk. The features included are 8 locks, wifi tether, sound, overscroll, reboot and rotation lag fix mods.
Special Thanks to Thanks to Maddoggin for taking the time to update the 8 locks Mod which includes reboot and overscroll. Thanks to mkasick and randomking for the volume Mod. Thanks to Chris41G for the rotation lag fix Mod. And last but certainly not least, Thanks to Necrosan for the wifi tether Mod.
YOU MUST HAVE MADDOGGINS MOD INSTALLED BEFORE USING THIS!
Get Moddoggins Mod here http://forum.xda-developers.com/showthread.php?t=1089073
After some testing it looks like the new framework has cleared the issue I had with renaming it to Wireless Hotspot. So I am going to put up both versions to let you choose which one you want to use.
Flash this zip with clockwork. Make sure you have maddoggins mod installed first.
Don't forget that if your battery is missing after flashing to go to Settings|Lockscreen Settings|Statusbar Settings and check Hide Battery Icon then uncheck it.
MD5: afb0110ef43603c3ae7c3990029ec321
Download Sprint Hotspot: http://www.multiupload.com/0P7TRYUJO3
MD5: 5450adead251571faa4f4d1ab324de1c
Download Wireless Hotspot: http://www.multiupload.com/LQHCKQTNIA
This is the latest version of maddoggins mod right?
Sent from my SPH-D700 using XDA App
Thanks for being so quick on compiling and releasing this. I already flashed half of this individually but I can flash this now so i dont have to reflash more times. is this themed at all?
deano0714 said:
This is the latest version of maddoggins mod right?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yes this is his latest version.
justlovejoy said:
Thanks for being so quick on compiling and releasing this. I already flashed half of this individually but I can flash this now so i dont have to reflash more times. is this themed at all?
Click to expand...
Click to collapse
No problem. This is not themed. It is built off the stock version of maddoggins EH06 release.
Quick ? Still says sprint hotspot ......but works fine ......is it suppose to say wireless
Sent from my SPH-D700 using XDA App
lballer69 said:
Quick ? Still says sprint hotspot ......but works fine ......is it suppose to say wireless
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Read the OP.
crawrj said:
Read the OP.
Click to expand...
Click to collapse
Lol at work got a lil flash happy
Gracious
Sent from my SPH-D700 using XDA App
Thanks much your hard work!
Will install when I get home.
does it fix the browser lag?
I think I get it. I have the deodexed Rom from deca, and I flashed maddoggins EH06 8 screen mod already.
So this I just flash with CWM (no wipes) and I'm all good?
dcowboys2184 said:
does it fix the browser lag?
Click to expand...
Click to collapse
No it doesn't fix the browser. You can flash my odin EH06 for a working browser. I will throw up a cwm fix for it in a few since it seems a few people have asked about it.
Neckberg said:
I think I get it. I have the deodexed Rom from deca, and I flashed maddoggins EH06 8 screen mod already.
So this I just flash with CWM (no wipes) and I'm all good?
Click to expand...
Click to collapse
That's it. Just flash and go.
crawrj said:
No it doesn't fix the browser. You can flash my odin EH06 for a working browser. I will throw up a cwm fix for it in a few since it seems a few people have asked about it.
Click to expand...
Click to collapse
done that then installed the theme ... it was fine until i installed mads theme
dcowboys2184 said:
done that then installed the theme ... it was fine until i installed mads theme
Click to expand...
Click to collapse
Didn't think to check that. Maddoggin didn't use my updated Deodex to built his mod. Here is a fix and I will update the OP http://forum.xda-developers.com/showthread.php?t=1221670
Edit: The browser fix doesn't work. The problem is not the browser but the framework. I have pulled this until it can be updated.
crawrj said:
This is an all in one mod similar to the one RandomKing did for EG22. This includes a framework.jar, services.jar and settings.apk. The features included are 8 locks, wifi tether, sound, crt, overscroll, reboot and rotation lag fix mods.
Thanks to mkasick and randomking for the volume Mod. Thanks to Maddoggin for the 8 locks Mod which includes reboot, crt and overscroll. Thanks to Chris41G for the rotation lag fix Mod. And last but certainly not least, Thanks to Necrosan for the wifi tether Mod.
YOU MUST HAVE MADDOGGINS MOD INSTALLED BEFORE USING THIS!
Flash this zip with clockwork. Make sure you have maddoggins mod installed first. This will rename the Wifi Hotspot app back to Sprint Hotspot (Found compatibility issues on this while theming).
Download:
MD5: 6a92b6d90466154b3a0e4872281d3044
Pulled - Pending Update of 8 Locks
Click to expand...
Click to collapse
Was his mod was released earlier than the new DeOdex versions that were done with baksmali 1.27? The modifications he made to the system files were they DeOdexed with the newer 1.27 version? I just don't want to carry in proposed problems as people said 1.26 did not handle Samsung 2.3 roms properly.
formula84 said:
Was his mod was released earlier than the new DeOdex versions that were done with baksmali 1.27? The modifications he made to the system files were they DeOdexed with the newer 1.27 version? I just don't want to carry in proposed problems as people said 1.26 did not handle Samsung 2.3 roms properly.
Click to expand...
Click to collapse
I am assuming that it was built on the old 1.26 since the browser is busted and it won't decompile unless I use 1.26. I have sent maddoggin a PM to ask if he will update this based off my version for us.
crawrj said:
I am assuming that it was built on the old 1.26 since the browser is busted and it won't decompile unless I use 1.26. I have send maddoggin a PM to ask if he will update this based off my version for us.
Click to expand...
Click to collapse
Wow that sucks, I wonder if the older version only has issues with framework or if it will effect all APKs like settings, phone, etc all the other themed ones he has done...
formula84 said:
Wow that sucks, I wonder if the older version only has issues with framework or if it will effect all APKs like settings, phone, etc all the other themed ones he has done...
Click to expand...
Click to collapse
All I can say is this. I used 1.26 on EG22, because the new one wasn't out, and the whole time I used EG22 the only problem I had was with the Browser. Maybe I didn't have problems or maybe I didn't notice any issues or maybe I didn't use it enough to get any issues. With that being said, I still want to work off of the latest version which I know at the very least fixes the browser. If the framework is messed up enough to hose the browser than who knows what else is going on.
crawrj said:
All I can say is this. I used 1.26 on EG22, because the new one wasn't out, and the whole time I used EG22 the only problem I had was with the Browser. Maybe I didn't have problems or maybe I didn't notice any issues or maybe I didn't use it enough to get any issues. With that being said, I still want to work off of the latest version which I know at the very least fixes the browser. If the framework is messed up enough to hose the browser than who knows what else is going on.
Click to expand...
Click to collapse
You sir are a wise man. Exactly who knows how many other little problems could have been caused by the old Baksmili
Sent from my SPH-D700 using Tapatalk