I think i screwed up. Dash 3g, did have SPL 1.26 now somehow says SPL-1.19.Hard. I am trying to fix it but it is not recognized...PLEASE!!!
MAPL100
SSpl-1.19.Hard
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x88
PanelInfo 15-0x2
Upgrade ROM code error
Please try again
**EDIT**
I was being a blind idiot trying to flash back to the t-mo 6.5 instead of 3VO...yup i need a break
Related
hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.
u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition
but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.
You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).
thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.
Is there a crossbow Rom only update for:
Cingular 8125 (Wizard 100) G3 chipset
IPL/SPL: 2.25
Rom Version 2.25.11.1
Radio 2.25.11
Also, Is it possible to update without a sim card in the Wizard? I have tried and have been reverting back to Cingulars ROM. Sticks at 100% then I get error 300.
Thanks
Hi there.
I wanted to update to the latest ENG rom on my S200, downloaded it of MyQtek, but when i tryed to upgrade, it said "Wrong Vendor ID". After a search i found that had to update first with Aku 2.2 NVID, done that.
Then i tryed again, and it said the same, then i took the nk.rom from the original package and replaced the same on NVID package, and it did the upgrade, but now i have:
IPL 2.10
SPL 2.20.000
GSM 02.47.21
ROM 2.20.7.34
Where is the upgrade ?!
ok so i tried to hardspl and flash my Dash (MAPL)
now its actin real screwy (droppin calls, freezing, etc...) so i am going to try to replace the phone at tmobile, since it's within the 14days, for a new phone but i need the original info
so far what i have "back to the original" is the splash screen reads:
B 00
G 61.36t.25.29AU
R 3.47.25.48m
D 2.06.71798
Bootloader reads:
MAPL100
SPL-1.26.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
and i used the updated rom from the tmo website. im not sure if they will have a problem with that but i'm guna try unless i can find the rom that came out-of-the-box unless thats what this is.
i used the "maple-original-spl-1.17.nbh" and the flashed to the "T-Mobile Dash 3G Software_2.0.6.531.4"
flash ran smoothly but am i missing anything else?
thanks to whoever comes to my rescue.
I have tried all the roms possibles existing and also computer operatng system and my cell continues bricked.
I can still get into bootloader (screen with colors on it)But when i tried to flash i get error something this rom is not for this cellphone etc etc.
Also tried the fat32 caed repair same problem.
Mapl120
spl-1.22.0000
microp-maple (led)v6
engid 0x2
pcbid 0x80
panelinfo 15-0x2
cellphon provider:I don't have a clue whitch one was it.
all though it comes with an spanish keyboard.Telefonica roms give a cid error that the rom is not for my cellphone.Which it makes sense been a mapl120 that's the usa version. tried the tmobile also carrier error etc etc,
SO maybe somebody can give me a hand on this.
Or point me to the place in the htc site where i can get the original rom by giving the serial number which is commented all in the forum ,but it has been impossible for me to find that place in the htc site.